Industry, Published by: AENOR

UNE-EN ISO 17268:2022

Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2020)
6/22/2022 - PDF - Spanish -
Learn More

€99.00

UNE-EN ISO 17268:2022

Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2020)
6/22/2022 - PDF - English -
Learn More

€118.80

UNE-EN 17127:2022

Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
6/15/2022 - PDF - Spanish -
Learn More

€68.00

UNE-EN 17127:2022

Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols
6/15/2022 - PDF - English -
Learn More

€81.60

UNE-EN ISO 41014:2021

Facility management - Development of facility management strategy (ISO 41014:2020)
11/3/2021 - PDF - Spanish -
Learn More

€103.00

UNE-EN ISO 41014:2021

Facility management - Development of facility management strategy (ISO 41014:2020)
11/3/2021 - PDF - English -
Learn More

€123.60

UNE-EN 17533:2021

Gaseous hydrogen - Cylinders and tubes for stationary storage
5/26/2021 - PDF - Spanish -
Learn More

€126.00

UNE-EN 17533:2021

Gaseous hydrogen - Cylinders and tubes for stationary storage
5/26/2021 - PDF - English -
Learn More

€151.20

UNE-EN ISO 14978:2021

Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/27/2021 - PDF - Spanish -
Learn More

€98.00

UNE-EN ISO 14978:2021

Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/27/2021 - PDF - English -
Learn More

€117.60

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
8/1/2020 - PDF - English -
Learn More

€68.00

UNE-EN ISO 10360-5:2020

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English -
Learn More

€94.00

UNE-EN ISO 16610-29:2020

Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English -
Learn More

€72.00

UNE-EN ISO 20170:2019

Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English -
Learn More

€72.00

UNE-EN ISO 25178-600:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English -
Learn More

€72.00

UNE-EN ISO 25178-73:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English -
Learn More

€65.00

UNE-EN ISO 25178-607:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English -
Learn More

€72.00

UNE-EN ISO 13385-1:2019

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English -
Learn More

€69.00

UNE-EN ISO 25178-72:2020

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
3/4/2020 - PDF - Spanish -
Learn More

€74.00

UNE-EN ISO 25178-72:2020

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
3/4/2020 - PDF - English -
Learn More

€88.80

UNE-EN ISO 16610-61:2015/A1:2020

Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019) (Endorsed by Asociación Española de Normalización in February of 2020.)
2/1/2020 - PDF - English -
Learn More

€15.00

UNE-EN ISO 14405-2:2019

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
10/2/2019 - PDF - Spanish -
Learn More

€74.00

UNE-EN ISO 14405-2:2019

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
10/2/2019 - PDF - English -
Learn More

€88.80

UNE-EN ISO 41012:2019

Facility management - Guidance on strategic sourcing and the development of agreements (ISO 41012:2017)
5/22/2019 - PDF - English -
Learn More

€148.80

UNE-EN ISO 41012:2019

Facility management - Guidance on strategic sourcing and the development of agreements (ISO 41012:2017)
5/22/2019 - PDF - Spanish -
Learn More

€124.00

UNE-EN ISO 14253-1:2019

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
3/27/2019 - PDF - English -
Learn More

€88.80

UNE-EN ISO 1938-2:2019

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/27/2019 - PDF - English -
Learn More

€81.60

UNE-EN ISO 17450-4:2019

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
3/27/2019 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 14253-1:2019

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
3/27/2019 - PDF - Spanish -
Learn More

€74.00

UNE-EN ISO 1938-2:2019

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/27/2019 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 17450-4:2019

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
3/27/2019 - PDF - English -
Learn More

€81.60

UNE-EN ISO 16610-28:2018

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
12/5/2018 - PDF - Spanish -
Learn More

€71.00

UNE-EN ISO 16610-31:2018

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/5/2018 - PDF - English -
Learn More

€81.60

UNE-EN ISO 16610-28:2018

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
12/5/2018 - PDF - English -
Learn More

€85.20

UNE-EN ISO 16610-31:2018

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/5/2018 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 41001:2018

Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018)
11/21/2018 - PDF - Spanish -
Learn More

€109.00

UNE-EN ISO 41011:2018

Facility management - Vocabulary (ISO 41011:2017)
11/21/2018 - PDF - English -
Learn More

€81.60

UNE-EN ISO 41001:2018

Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018)
11/21/2018 - PDF - English -
Learn More

€130.80

UNE-EN ISO 41011:2018

Facility management - Vocabulary (ISO 41011:2017)
11/21/2018 - PDF - Spanish -
Learn More

€68.00

UNE-EN 13306:2018

Maintenance - Maintenance terminology.
7/11/2018 - PDF - Spanish -
Learn More

€78.00

UNE-EN 13306:2018

Maintenance - Maintenance terminology.
7/11/2018 - PDF - English -
Learn More

€93.60

UNE-EN 17007:2018

Maintenance process and associated indicators
5/30/2018 - PDF - Spanish -
Learn More

€124.00

UNE-EN 17007:2018

Maintenance process and associated indicators
5/30/2018 - PDF - English -
Learn More

€148.80

UNE-EN ISO 25178-71:2017

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
3/1/2018 - PDF - English -
Learn More

€60.00

UNE-EN ISO 10156:2018

Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017)
1/31/2018 - PDF - English -
Learn More

€94.80

UNE-EN ISO 10156:2018

Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017)
1/31/2018 - PDF - Spanish -
Learn More

€79.00

UNE-EN ISO 14405-3:2017

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) (Endorsed by Asociación Española de Normalización in July of 2017.)
7/1/2017 - PDF - English -
Learn More

€69.00

UNE-EN ISO 18391:2016

Geometrical product specifications (GPS) - Population specification (ISO 18391:2016) (Endorsed by Asociación Española de Normalización in May of 2017.)
5/1/2017 - PDF - English -
Learn More

€65.00

UNE-EN ISO 1101:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
4/1/2017 - PDF - English -
Learn More

€168.00

UNE-EN ISO 1660:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
4/1/2017 - PDF - English -
Learn More

€87.00

UNE-EN ISO 17450-3:2017

Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
3/1/2017 - PDF - Spanish -
Learn More

€71.00

UNE-EN ISO 17450-3:2017

Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
3/1/2017 - PDF - English -
Learn More

€85.20

UNE-EN ISO 3040:2016

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
12/14/2016 - PDF - Spanish -
Learn More

€74.00

UNE-EN ISO 3040:2016

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
12/14/2016 - PDF - English -
Learn More

€88.80

UNE-EN 13269:2016

Maintenance - Guideline on preparation of maintenance contracts
11/23/2016 - PDF - English -
Learn More

€81.60

UNE-EN 13269:2016

Maintenance - Guideline on preparation of maintenance contracts
11/23/2016 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 16610-60:2015

Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015) (Endorsed by AENOR in February of 2016.)
2/1/2016 - PDF - English -
Learn More

€65.00

UNE-EN ISO 1938-1:2015

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) (Endorsed by AENOR in February of 2016.)
2/1/2016 - PDF - English -
Learn More

€74.00

UNE-EN 16636:2015 (R2022)

Pest management services - Requirements and competences
11/18/2015 - PDF - English -
Learn More

€88.80

UNE-EN 16636:2015 (R2022)

Pest management services - Requirements and competences
11/18/2015 - PDF - Spanish -
Learn More

€74.00

UNE-EN ISO 17450-1:2015

Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
11/4/2015 - PDF - English -
Learn More

€134.40

UNE-EN ISO 17450-1:2015

Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
11/4/2015 - PDF - Spanish -
Learn More

€112.00

UNE-EN ISO 14253-5:2015

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) (Endorsed by AENOR in November of 2015.)
11/1/2015 - PDF - English -
Learn More

€65.00

UNE-EN ISO 17450-2:2015

Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
10/28/2015 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 17450-2:2015

Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
10/28/2015 - PDF - English -
Learn More

€81.60

UNE-EN ISO 16610-22:2015

Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More

€66.00

UNE-EN ISO 25178-606:2015

Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More

€72.00

UNE-EN ISO 16610-61:2015

Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More

€66.00

UNE-EN ISO 16610-41:2015

Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More

€63.00

UNE-EN ISO 16610-40:2015

Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015) (Endorsed by AENOR in August of 2015.)
8/1/2015 - PDF - English -
Learn More

€65.00

UNE-EN ISO 16610-49:2015

Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015) (Endorsed by AENOR in August of 2015.)
8/1/2015 - PDF - English -
Learn More

€65.00

UNE-EN ISO 16610-20:2015

Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015) (Endorsed by AENOR in July of 2015.)
7/1/2015 - PDF - English -
Learn More

€64.00

UNE-EN ISO 16610-1:2015

Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015) (Endorsed by AENOR in July of 2015.)
7/1/2015 - PDF - English -
Learn More

€72.00

UNE-EN ISO 2538-1:2015

Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
6/24/2015 - PDF - English -
Learn More

€69.60

UNE-EN ISO 2538-2:2015

Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
6/24/2015 - PDF - Spanish -
Learn More

€63.00

UNE-EN ISO 2538-1:2015

Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
6/24/2015 - PDF - Spanish -
Learn More

€58.00

UNE-EN ISO 2538-2:2015

Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
6/24/2015 - PDF - English -
Learn More

€75.60

UNE-EN ISO 10579:2015

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
6/17/2015 - PDF - English -
Learn More

€62.40

UNE-EN ISO 10579:2015

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
6/17/2015 - PDF - Spanish -
Learn More

€52.00

UNE-EN 15628:2015

Maintenance - Qualification of maintenance personnel
4/1/2015 - PDF - Spanish -
Learn More

€74.00

UNE-EN 15628:2015

Maintenance - Qualification of maintenance personnel
4/1/2015 - PDF - English -
Learn More

€88.80

UNE-EN ISO 14638:2015

Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) (Endorsed by AENOR in March of 2015.)
3/1/2015 - PDF - English -
Learn More

€69.00

UNE-ISO 16110-1:2015 (R2021)

Hydrogen generators using fuel processing technologies -- Part 1: Safety
1/28/2015 - PDF - Spanish -
Learn More

€126.00

UNE-EN ISO 16610-71:2014

Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More

€68.00

UNE-EN ISO 25178-605:2014

Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More

€74.00

UNE-EN ISO 10360-9:2013

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More

€66.00

UNE-EN ISO 25178-604:2013

Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More

€80.00

UNE-EN ISO 25178-70:2014

Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More

€78.00

UNE-EN ISO 25178-603:2013

Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More

€72.00

UNE-CEN ISO/TS 8062-2:2013

Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013) (Endorsed by AENOR in January of 2014.)
1/1/2014 - PDF - English -
Learn More

€96.00

UNE-EN ISO 14253-2:2012/AC:2013

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)
11/20/2013 - PDF - English -
Learn More

€0.00

UNE-EN ISO 286-2:2011/AC:2013

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
11/20/2013 - PDF - Spanish -
Learn More

€0.00

UNE-EN ISO 286-1:2011/AC:2013

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
11/20/2013 - PDF - Spanish -
Learn More

€0.00

UNE-EN ISO 14253-2:2012/AC:2013

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)
11/20/2013 - PDF - Spanish -
Learn More

€0.00

UNE-EN ISO 286-2:2011/AC:2013

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
11/20/2013 - PDF - English -
Learn More

€0.00

UNE-EN ISO 286-1:2011/AC:2013

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
11/20/2013 - PDF - English -
Learn More

€0.00

UNE-EN ISO 16610-85:2013

Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013) (Endorsed by AENOR in October of 2013.)
10/1/2013 - PDF - English -
Learn More

€71.00

UNE-EN ISO 5436-2:2012

Geometrical product specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) (Endorsed by AENOR in October of 2013.)
10/1/2013 - PDF - English -
Learn More

€65.00

UNE-EN ISO 13102:2013

Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
5/8/2013 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 25178-3:2013

Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
5/8/2013 - PDF - English -
Learn More

€81.60

UNE-EN ISO 16610-21:2013

Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
5/8/2013 - PDF - English -
Learn More

€85.20

UNE-EN ISO 13102:2013

Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
5/8/2013 - PDF - English -
Learn More

€81.60

UNE-EN ISO 25178-3:2013

Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
5/8/2013 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 16610-21:2013

Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
5/8/2013 - PDF - Spanish -
Learn More

€71.00

UNE-EN ISO 13225:2012

Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
12/19/2012 - PDF - Spanish -
Learn More

€74.00

UNE-EN ISO 13225:2012

Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
12/19/2012 - PDF - English -
Learn More

€88.80

UNE-EN ISO 25378:2012

Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
11/14/2012 - PDF - Spanish -
Learn More

€104.00

UNE-EN ISO 25378:2012

Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
11/14/2012 - PDF - English -
Learn More

€124.80

UNE-EN ISO 14253-3:2012

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
10/3/2012 - PDF - English -
Learn More

€75.60

UNE-EN ISO 5459:2012

Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
10/3/2012 - PDF - English -
Learn More

€151.20

UNE-EN ISO 14253-3:2012

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
10/3/2012 - PDF - Spanish -
Learn More

€63.00

UNE-EN ISO 5459:2012

Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
10/3/2012 - PDF - Spanish -
Learn More

€126.00

UNE-EN ISO 14253-2:2012

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
7/25/2012 - PDF - English -
Learn More

€148.80

UNE-EN ISO 14253-2:2012

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
7/25/2012 - PDF - Spanish -
Learn More

€124.00

UNE-EN ISO 1119:2012

Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
7/11/2012 - PDF - Spanish -
Learn More

€53.00

UNE-EN ISO 1119:2012

Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
7/11/2012 - PDF - English -
Learn More

€63.60

UNE-EN ISO 22432:2011

Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) (Endorsed by AENOR in July of 2012.)
7/1/2012 - PDF - English -
Learn More

€90.00

UNE-EN ISO 15530-3:2011

Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) (Endorsed by AENOR in July of 2012.)
7/1/2012 - PDF - English -
Learn More

€66.00

UNE-EN ISO 8015:2012

Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
6/20/2012 - PDF - Spanish -
Learn More

€60.00

UNE-EN ISO 8015:2012

Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
6/20/2012 - PDF - English -
Learn More

€72.00

UNE-EN ISO 10360-7:2012

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
6/13/2012 - PDF - Spanish -
Learn More

€87.00

UNE-EN ISO 10360-7:2012

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
6/13/2012 - PDF - English -
Learn More

€104.40

UNE-EN ISO 12780-1:2012

Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
6/6/2012 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 12780-2:2012

Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
6/6/2012 - PDF - English -
Learn More

€72.00

UNE-EN ISO 12780-1:2012

Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
6/6/2012 - PDF - English -
Learn More

€81.60

UNE-EN ISO 12780-2:2012

Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
6/6/2012 - PDF - Spanish -
Learn More

€60.00

UNE-EN 15331:2012 (R2017)

Criteria for design, management and control of maintenance services for buildings
2/22/2012 - PDF - Spanish -
Learn More

€69.00

UNE-EN 15331:2012 (R2017)

Criteria for design, management and control of maintenance services for buildings
2/22/2012 - PDF - English -
Learn More

€82.80

UNE-EN ISO 12781-2:2012

Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
2/15/2012 - PDF - Spanish -
Learn More

€63.00

UNE-EN ISO 12781-2:2012

Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
2/15/2012 - PDF - English -
Learn More

€75.60

UNE-EN ISO 12180-1:2012

Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
2/8/2012 - PDF - English -
Learn More

€81.60

UNE-EN ISO 12781-1:2012

Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
2/8/2012 - PDF - Spanish -
Learn More

€60.00

UNE-EN ISO 12180-1:2012

Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
2/8/2012 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 12781-1:2012

Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
2/8/2012 - PDF - English -
Learn More

€72.00

UNE-EN ISO 9493:2012

Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
2/1/2012 - PDF - English -
Learn More

€84.00

UNE-EN ISO 12181-2:2012

Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
2/1/2012 - PDF - Spanish -
Learn More

€60.00

UNE-EN ISO 12181-1:2012

Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
2/1/2012 - PDF - Spanish -
Learn More

€63.00

UNE-EN ISO 14406:2012

Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
2/1/2012 - PDF - English -
Learn More

€81.60

UNE-EN ISO 12180-2:2012

Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
2/1/2012 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 12181-2:2012

Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
2/1/2012 - PDF - English -
Learn More

€72.00

UNE-EN ISO 9493:2012

Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
2/1/2012 - PDF - Spanish -
Learn More

€70.00

UNE-EN ISO 12181-1:2012

Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
2/1/2012 - PDF - English -
Learn More

€75.60

UNE-EN ISO 12180-2:2012

Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
2/1/2012 - PDF - English -
Learn More

€81.60

UNE-EN ISO 14406:2012

Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
2/1/2012 - PDF - Spanish -
Learn More

€68.00

UNE 151001:2011

Maintenance. Maintainability indicators for industrial devices. Definition and assessment
7/20/2011 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 25178-601:2011

Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
5/11/2011 - PDF - Spanish -
Learn More

€68.00

UNE-EN ISO 25178-701:2011

Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
5/11/2011 - PDF - English -
Learn More

€88.80

UNE-EN ISO 25178-602:2011

Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
5/11/2011 - PDF - English -
Learn More

€92.40

UNE-EN ISO 25178-601:2011

Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
5/11/2011 - PDF - English -
Learn More

€81.60

UNE-EN ISO 25178-701:2011

Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
5/11/2011 - PDF - Spanish -
Learn More

€74.00

UNE-EN ISO 25178-602:2011

Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
5/11/2011 - PDF - Spanish -
Learn More

€77.00

UNE-EN ISO 286-2:2011

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
3/2/2011 - PDF - Spanish -
Learn More

€99.00

UNE-EN ISO 286-2:2011

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
3/2/2011 - PDF - English -
Learn More

€118.80

UNE-EN ISO 286-1:2011

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
2/23/2011 - PDF - Spanish -
Learn More

€85.00

UNE-EN ISO 286-1:2011

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
2/23/2011 - PDF - English -
Learn More

€102.00

UNE-EN ISO 25178-6:2010

Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
12/15/2010 - PDF - English -
Learn More

€72.00

UNE-EN ISO 10360-2:2010

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
12/15/2010 - PDF - English -
Learn More

€92.40

UNE-EN ISO 25178-6:2010

Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
12/15/2010 - PDF - Spanish -
Learn More

€60.00

UNE-EN ISO 10360-2:2010

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
12/15/2010 - PDF - Spanish -
Learn More

€77.00

UNE 181001:2010 (R2019)

Hydrogen technologies. Terminology.
4/21/2010 - PDF - Spanish -
Learn More

€76.00

UNE-EN 13460:2009 (R2014)

Maintenance - Documentation for maintenance
12/22/2009 - PDF - English -
Learn More

€84.00

UNE-EN 13460:2009 (R2014)

Maintenance - Documentation for maintenance
12/22/2009 - PDF - Spanish -
Learn More

€70.00

UNE-EN ISO 10135:2009

Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
11/18/2009 - PDF - Spanish -
Learn More

€104.00

UNE-EN ISO 10135:2009

Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
11/18/2009 - PDF - English -
Learn More

€124.80

UNE-EN 60706-3:2009

Maintainability of equipment -- Part 3: Verification and collection, analysis and presentation of data
9/9/2009 - PDF - Spanish -
Learn More

€84.00

UNE-EN 60706-3:2009

Maintainability of equipment -- Part 3: Verification and collection, analysis and presentation of data
9/9/2009 - PDF - English -
Learn More

€100.80

UNE-EN ISO 14175:2009

Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
5/20/2009 - PDF - Spanish -
Learn More

€57.00

UNE-EN ISO 14175:2009

Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
5/20/2009 - PDF - English -
Learn More

€68.40

UNE-EN ISO 10360-6:2002/AC:2009

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
4/29/2009 - PDF - Spanish -
Learn More

€0.00

UNE-EN ISO 12085:1998/AC:2009

Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
4/29/2009 - PDF - Spanish -
Learn More

€0.00

UNE-EN ISO 10360-6:2002/AC:2009

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
4/29/2009 - PDF - English -
Learn More

€0.00