Geometrical Product Specification (GPS)
|
The geometrical product specification (GPS) is a standard method which aims to define for a part what is admissible for its geometric and functional characteristics to be good . These specifications can give shape, dimensions, surface finish, etc. of this room.
The ICS code 17.040.40 groups together all the standards on the subject!
|
|
For which industries :
- Automotive
- Aeronautics
- Railway
Find our selection :
|
|
|
-
DIN EN ISO 25178-6:2010-06
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)
6/1/2010 - PDF - English -
Learn More€91.12 -
DIN EN ISO 10360-2:2010-06
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
6/1/2010 - PDF - English -
Learn More€131.40 -
DIN EN ISO 25178-6:2010-06
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010), German version EN ISO 25178-6:2010
6/1/2010 - PDF - German -
Learn More€72.80 -
BS EN ISO 25178-6:2010
Geometrical product specifications (GPS). Surface texture. Areal Classification of methods for measuring surface texture
5/31/2010 - PDF - English -
Learn More€180.00 -
NF EN ISO 25178-6, E05-031-6 (05/2010)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 6 : classification of methods for measuring surface texture - Spécification géométrique des produits (GPS)
5/1/2010 - Paper - French -
Learn More€58.33 -
DIN EN ISO 10135:2010-02
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007), German version EN ISO 10135:2009
2/1/2010 - PDF - German -
Learn More€141.96 -
DIN EN ISO 10135:2010-02
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
2/1/2010 - PDF - English -
Learn More€177.38 -
BS EN ISO 10360-2:2009
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used linear dimensions
1/31/2010 - PDF - English -
Learn More€293.00 -
NF EN ISO 10360-2, E11-150-2 (01/2010)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2 : CMMs used for measuring linear dimensions - Spécification géométrique des produits (GPS)
1/1/2010 - Paper - French -
Learn More€99.00 -
UNE-EN ISO 10135:2009
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
11/18/2009 - PDF - Spanish -
Learn More€104.00 -
UNE-EN ISO 10135:2009
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
11/18/2009 - PDF - English -
Learn More€124.80 -
DIN EN ISO 12085 Berichtigung 1:2009-09
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996), German version EN ISO 12085:1997, Corrigendum to DIN EN ISO 12085:1998-05, German version EN ISO 12085:1997/AC:2008
9/1/2009 - PDF - German -
Learn More€0.00 -
DIN EN ISO 12085 Berichtigung 1:2009-09
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996), Corrigendum 1 to English translation of DIN EN ISO 12085:1998-05
9/1/2009 - PDF - English -
Learn More€0.00 -
BS EN ISO 12085:1997
Geometrical product specification (GPS). Surface texture. Profile method. Motif parameters
7/31/2009 - PDF - English -
Learn More€180.00 -
DIN EN ISO 463 Berichtigung 1:2009-07
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006), German version EN ISO 463:2006, Corrigendum to DIN EN ISO 463:2006-06, German version EN ISO 463:2006/AC:2009
7/1/2009 - PDF - German -
Learn More€0.00 -
DIN EN ISO 463 Berichtigung 1:2009-07
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006), Corrigendum 1 to English version of DIN EN ISO 463:2006-06
7/1/2009 - PDF - English -
Learn More€0.00 -
BS EN ISO 10135:2009
Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
5/31/2009 - PDF - English -
Learn More€348.00 -
UNE-EN ISO 10360-6:2002/AC:2009
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
4/29/2009 - PDF - Spanish -
Learn More€0.00 -
UNE-EN ISO 12085:1998/AC:2009
Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
4/29/2009 - PDF - Spanish -
Learn More€0.00 -
UNE-EN ISO 10360-6:2002/AC:2009
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
4/29/2009 - PDF - English -
Learn More€0.00 -
UNE-EN ISO 12085:1998/AC:2009
Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998)
4/29/2009 - PDF - English -
Learn More€0.00 -
UNE-EN ISO 8062-1:2009
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
3/4/2009 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 8062-1:2009
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
3/4/2009 - PDF - Spanish -
Learn More€68.00 -
DIN EN ISO 10360-6:2009-01
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001+Cor. 1:2007)
1/1/2009 - PDF - English -
Learn More€107.48 -
DIN EN ISO 10360-6:2009-01
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001+Cor. 1:2007), German version EN ISO 10360-6:2001+AC:2007
1/1/2009 - PDF - German -
Learn More€85.79 -
DD ISO/TS 15530-4:2008
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific using simulation
11/30/2008 - PDF - English -
Learn More€293.00 -
DIN 2250-1:2008-10
Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 1: From 1 mm up to 315 mm nominal diameter
10/1/2008 - PDF - German -
Learn More€52.90 -
DIN 2250-1:2008-10
Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 1: From 1 mm up to 315 mm nominal diameter
10/1/2008 - PDF - English -
Learn More€66.07 -
DIN ISO/TS 23165:2008-08
Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty (ISO/TS 23165:2006)
8/1/2008 - PDF - German -
Learn More€110.00 -
BS EN ISO 10360-6:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features
7/31/2008 - PDF - English -
Learn More€250.00 -
DIN 2248-3:2008-07
Geometrical product specifications (GPS) - ''GO'' gauging members - Part 3: For holes over 120 mm up to 200 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2285-1:2008-07
Geometrical product specifications (GPS) - ''GO'' screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm, general purpose
7/1/2008 - PDF - English -
Learn More€57.57 -
DIN 2232:2008-07
Geometrical product specifications (GPS) - Gap gauges ''GO'' with forged gauging member over 3 mm up to 100 mm nominal size
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2246-2:2008-07
Geometrical product specifications (GPS) - ''GO'' plug gauges - Part 2: For holes over 120 mm up to 200 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€22.99 -
DIN 2247-4:2008-07
Geometrical product specifications (GPS) - ''NOT GO'' plug gauges - Part 4: With segmental cylindrical gauging member over 120 mm up to 200 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€22.99 -
DIN 2249-4:2008-07
Geometrical product specifications (GPS) - ''NOT GO'' gauging members - Part 4: Cylindrical gauging members for holes over 40 mm up to 120 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2245-2:2008-07
Geometrical product specifications (GPS) - Limit plug gauges - Part 2: For holes over 40 mm up to 65 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2247-2:2008-07
Geometrical product specifications (GPS) - ''NOT GO'' plug gauges - Part 2: With rod gauge for holes over 40 mm up to 500 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2249-2:2008-07
Geometrical product specifications (GPS) - ''NOT GO'' gauging members - Part 2: Rod gauge for holes over 40 mm up to 500 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2259:2008-07
Geometrical product specifications (GPS) - Gauges for cylindrical fits and fits of plan surfaces - Survey, inscription, marking
7/1/2008 - PDF - German -
Learn More€65.89 -
DIN 2233:2008-07
Geometrical product specifications (GPS) - Gap gauges ''NOT GO'' with forged gauging member over 3 mm up to 100 mm nominal size
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2246-3:2008-07
Geometrical product specifications (GPS) - ''GO'' plug gauges - Part 3: For holes over 40 mm up to 120 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€22.99 -
DIN 2248-2:2008-07
Geometrical product specifications (GPS) - ''GO'' gauging members - Part 2: For holes over 40 mm up to 120 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2285-1:2008-07
Geometrical product specifications (GPS) - ''GO'' screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm, general purpose
7/1/2008 - PDF - German -
Learn More€45.98 -
DIN 2231:2008-07
Geometrical product specifications (GPS) - Limit gap gauges and forged gauging members over 3 mm up to 100 mm nominal size
7/1/2008 - PDF - German -
Learn More€32.34 -
XP ISO/TS 15530-4, E11-158-4 (07/2008)
Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM) : Technique for determining the uncertainty of measurement - Part 4 : Evaluating task-specific measurement uncertainty using simulation - Spécification géométrique des produits (GPS)
7/1/2008 - Paper - French -
Learn More€86.67 -
DIN 2246-1:2008-07
Geometrical product specifications (GPS) - ''GO'' plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2247-3:2008-07
Geometrical product specifications (GPS) - ''NOT GO'' plug gauges - Part 3: With cylindrical gauging member for holes over 40 mm up to 120 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2249-3:2008-07
Geometrical product specifications (GPS) - ''NOT GO'' gauging members - Part 3: Segmental cylindrical gauging members for holes over 120 mm up to 200 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2245-1:2008-07
Geometrical product specifications (GPS) - Limit plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2247-1:2008-07
Geometrical product specifications (GPS) - ''NOT GO'' plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
7/1/2008 - PDF - German -
Learn More€32.34 -
JIS B 1536-1:2008 (R2013)
Rolling bearings - Boundary dimensions and tolerances of needle roller bearings - Part 1: Dimension series 48, 49 and 69
4/20/2008 - PDF - Japanese -
Learn More€25.00 -
DIN EN ISO 8062-1:2008-01
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007); Trilingual version EN ISO 8062-1:2007
1/1/2008 - PDF - English, French, German -
Learn More€104.95 -
DIN 875-2:2008-01
Geometrical product specifications (GPS) - Squares 90° - Part 2: Granite squares 90°
1/1/2008 - PDF - German -
Learn More€32.34 -
DIN 874-3:2008-01
Geometrical product specifications (GPS) - Straight edges - Part 3: Granite straight edges; dimensions, technical delivery conditions
1/1/2008 - PDF - German -
Learn More€32.34 -
FD ISO/TR 16015, E10-001 (11/2007)
Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences - Spécification géométrique des produits (GPS)
11/1/2007 - Paper - French -
Learn More€108.00 -
BS EN ISO 8062-1:2007
Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Vocabulary
10/31/2007 - PDF - English -
Learn More€293.00 -
DD ISO/TS 23165:2006
Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
9/28/2007 - PDF - English -
Learn More€293.00 -
NF EN ISO 8062-1, A00-510-1 (08/2007)
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1 : vocabulary - Spécification géométrique des produits (GPS)
8/1/2007 - Paper - English, French -
Learn More€78.50 -
JIS B 0680:2007 (R2016)
Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification
3/20/2007 - PDF - Japanese -
Learn More€25.00 -
DIN 2253:2006-12
Geometrical product specifications (GPS) - Reference gauges for gap gauges from 1 mm to 315 mm nominal size
12/1/2006 - PDF - German -
Learn More€45.98 -
XP ISO/TS 23165, E11-170 (12/2006)
Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty - Spécification géométrique des produits (GPS)
12/1/2006 - Paper - French -
Learn More€99.33 -
DIN 2239:2006-12
Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing
12/1/2006 - PDF - German -
Learn More€45.98 -
DIN 866:2006-12
Geometrical product specifications (GPS) - Graduated rules, rules for manufacturing purposes - Design, requirements
12/1/2006 - PDF - German -
Learn More€52.90 -
UNE-EN ISO 463:2006
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
9/20/2006 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 463:2006
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
9/20/2006 - PDF - Spanish -
Learn More€68.00 -
DIN EN ISO 463:2006-06
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006
6/1/2006 - PDF - English -
Learn More€99.44 -
NF EN ISO 463, E11-050 (06/2006)
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges - Spécification géométrique des produits (GPS)
6/1/2006 - Paper - French -
Learn More€75.50 -
DIN EN ISO 463:2006-06
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006
6/1/2006 - PDF - German -
Learn More€79.72 -
DIN 875-1:2005-07
Geometrical Product Specifications (GPS) - Squares 90° - Part 1: Steel squares 90°
7/1/2005 - PDF - German -
Learn More€52.90 -
JIS B 1509:2005 (R2014)
Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances
3/20/2005 - PDF - Japanese -
Learn More€25.00 -
UNE-EN ISO 10360-1/AC:2004
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000/Cor.1:2002)
12/17/2004 - PDF - Spanish -
Learn More€0.00 -
UNE-EN ISO 10360-1/AC:2004
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000/Cor.1:2002)
12/17/2004 - PDF - English -
Learn More€0.00 -
BS EN 61108-4:2004
Marine navigation and radiocommunication equipment systems. Global satellite systems (GNSS) Shipborne DGPS DGLONASS maritime radio beacon receiver equipment. Performance requirements, methods of testing required test results
12/13/2004 - PDF - English -
Learn More€293.00 -
€46.02
-
JIS B 7440-6:2004 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
3/20/2004 - PDF - Japanese -
Learn More€36.27 -
NF E11-200 (03/2004) (R2009)
Geometrical product specification (GPS) - Measuring instruments in use - Use classes - Spécification géométrique des produits (GPS)
3/1/2004 - Paper - French -
Learn More€75.67 -
DIN EN ISO 1 Beiblatt 1:2004-02
Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specification and verification - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences (ISO/TR 16015:2003)
2/1/2004 - PDF - German -
Learn More€115.33 -
XP E03-110 (12/2003)
Geometrical product specification (GPS) - Screw threads - Direct measuring methods - Spécification géométrique des produits (GPS)
12/1/2003 - Paper - French -
Learn More€144.67 -
BS EN 61108-1:2003
Global navigation satellite systems (GNSS) positioning system (GPS). Receiver equipment. Performance standards, methods of testing and required test results
11/14/2003 - PDF - English -
Learn More€250.00 -
DIN 874-1:2003-11
Geometrical Product Specifications (GPS) - Straight edges - Part 1: Steel straight edges; Dimensions, technical delivery conditions
11/1/2003 - PDF - German -
Learn More€45.98 -
DIN 874-2:2003-11
Geometrical Product Specifications (GPS) - Straight edges - Part 2: Knife edge straight edges; Dimensions, technical delivery conditions
11/1/2003 - PDF - English -
Learn More€40.56 -
DIN 874-1:2003-11
Geometrical Product Specifications (GPS) - Straight edges - Part 1: Steel straight edges; Dimensions, technical delivery conditions
11/1/2003 - PDF - English -
Learn More€57.57 -
DIN 874-2:2003-11
Geometrical Product Specifications (GPS) - Straight edges - Part 2: Knife edge straight edges; Dimensions, technical delivery conditions
11/1/2003 - PDF - German -
Learn More€32.34 -
NF E11-018 (10/2003)
Geometrical product specification (GPS) - Calibration specimens - Plugs with grooves - Spécification géométrique des produits (GPS)
10/1/2003 - Paper - French -
Learn More€99.33 -
JIS B 0031:2003 (R2013)
Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation
9/20/2003 - PDF - Japanese -
Learn More€52.91 -
DIN EN ISO 10360-1:2003-07
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000 + Corr 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-1:2000 + AC:2002
7/1/2003 - PDF - German -
Learn More€99.35 -
DIN 254:2003-04
Geometrical product specifications (GPS) - Series of conical tapers and taper angles; Values for setting taper angles and setting heights
4/1/2003 - PDF - German -
Learn More€52.90 -
DIN 2299-1:2003-04
Geometrical Product Specification (GPS) - NOT GO screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm; General purposes
4/1/2003 - PDF - English -
Learn More€40.56 -
DIN 254:2003-04
Geometrical product specifications (GPS) - Series of conical tapers and taper angles; Values for setting taper angles and setting heights
4/1/2003 - PDF - English -
Learn More€66.07 -
DIN 2299-1:2003-04
Geometrical Product Specification (GPS) - NOT GO screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm; General purposes
4/1/2003 - PDF - German -
Learn More€32.34 -
JIS B 7440-4:2003 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode
3/20/2003 - PDF - Japanese -
Learn More€25.00 -
JIS B 7440-1:2003 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary
3/20/2003 - PDF - Japanese -
Learn More€41.86 -
JIS B 7440-3:2003 (R2013)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMM's with the axis of a rotary table as the fourth axis
3/20/2003 - PDF - Japanese -
Learn More€25.00 -
NF E11-107 (12/2002)
Geometrical Product Specification (GPS) - Spheres for metrology - Spécification géométrique des produits (GPS)
12/1/2002 - Paper - French -
Learn More€75.67 -
NF E11-019 (12/2002)
Geometrical product specification (GPS) - Specific standards - Rules of design and characteristics - Spécification géométrique des produits (GPS)
12/1/2002 - Paper - French -
Learn More€86.67 -
UNE-EN ISO 10360-6:2002 (R2008)
Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)
11/20/2002 - PDF - Spanish -
Learn More€70.00 -
UNE-EN ISO 10360-6:2002 (R2008)
Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)
11/20/2002 - PDF - English -
Learn More€84.00 -
JIS B 0672-2:2002 (R2013)
Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
9/20/2002 - PDF - Japanese -
Learn More€25.00 -
JIS B 0672-1:2002 (R2013)
Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions
9/20/2002 - PDF - Japanese -
Learn More€25.00 -
NF EN ISO 10360-6, E11-150-6 (02/2002)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 : estimation of errors in computing Gaussian associated features - Spécification géométrique des produits (GPS)
2/1/2002 - Paper - French -
Learn More€99.00 -
JIS B 0651/ERRATUM 2:2002
Geometrical Product Specification (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (Erratum 2)
1/1/2002 - PDF - Japanese -
Learn More€0.00 -
UNE-EN ISO 10360-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary. (ISO 10360-1:2000)
12/17/2001 - PDF - Spanish -
Learn More€76.00 -
UNE-EN ISO 10360-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary. (ISO 10360-1:2000)
12/17/2001 - PDF - English -
Learn More€91.20 -
UNE-EN ISO 3650:2001 ERRATUM (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS. (ISO 3650:1998)
12/17/2001 - PDF - Spanish -
Learn More€0.00 -
DIN 2281-2:2001-12
Geometrical product specifications (GPS) - GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
12/1/2001 - PDF - English -
Learn More€40.56 -
DIN 2279:2001-12
Geometrical Product Specifications (GPS) - Gauges for ISO metric screw threads - Gauging of the internal and external threads, Survey, inscription, marking, application
12/1/2001 - PDF - German -
Learn More€85.79 -
DIN 2240-1:2001-12
Geometrical Product Specification (GPS) - Gauge handles for gauging members up to 40 mm nominal diameter with 1:50 taper shank
12/1/2001 - PDF - English -
Learn More€40.56 -
DIN 2283-2:2001-12
Geometrical Product Specifications (GPS) - "NOT GO" screw plug gauges - Part 2: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
12/1/2001 - PDF - German -
Learn More€32.34 -
DIN 2282-2:2001-12
Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
12/1/2001 - PDF - English -
Learn More€57.57 -
DIN 2280:2001-12
Geometrical Product Specifications (GPS) - "GO" and "NOT GO" screw plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
12/1/2001 - PDF - German -
Learn More€32.34 -
DIN 2240-2:2001-12
Geometrical product specification (GPS) - Gauge handles for gauging members over 40 mm nominal diameter: Handles, fixing screws and locking prongs
12/1/2001 - PDF - English -
Learn More€57.57 -
DIN 2284-2:2001-12
Geometrical Product Specifications (GPS) - "NOT GO" screw gauging members - Part 2: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
12/1/2001 - PDF - German -
Learn More€45.98 -
DIN 2283-1:2001-12
Geometrical product specifications (GPS) - NOT GO workhop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
12/1/2001 - PDF - English -
Learn More€40.56 -
DIN 2281-1:2001-12
Geometrical Product Specifications (GPS) - "GO" screw plug gauges - Part 1: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
12/1/2001 - PDF - German -
Learn More€32.34 -
DIN 2279:2001-12
Geometrical product specifications (GPS) - Gauges for internal and external ISO metric screw threads - Overview of types, marking and application
12/1/2001 - PDF - English -
Learn More€107.48 -
DIN 2283-2:2001-12
Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with diameters over 40 mm up to 200 mm
12/1/2001 - PDF - English -
Learn More€40.56 -
DIN 2281-2:2001-12
Geometrical Product Specifications (GPS) - "GO" screw plug gauges - Part 2: "GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
12/1/2001 - PDF - German -
Learn More€32.34 -
DIN 2280:2001-12
Geometrical product specifications (GPS) - GO and NOT GO screw plug gauges for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
12/1/2001 - PDF - English -
Learn More€40.56 -
DIN 2240-1:2001-12
Geometrical Product Specification (GPS) - Handles - Part 1: For gauging members with taper lock 1:50 up to 40 mm nominal diameter
12/1/2001 - PDF - German -
Learn More€32.34 -
DIN 2284-2:2001-12
Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
12/1/2001 - PDF - English -
Learn More€57.57 -
DIN 2282-2:2001-12
Geometrical Product Specifications (GPS) - "GO" screw gauging members - Part 2: "GO" workshop gauges, check and setting gauging members for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter
12/1/2001 - PDF - German -
Learn More€45.98 -
DIN 2281-1:2001-12
Geometrical product specifications (GPS) - GO workshop screw plug gauges, check and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
12/1/2001 - PDF - English -
Learn More€40.56 -
DIN 2240-2:2001-12
Geometrical Product Specification (GPS) - Handles - Part 2: For gauging members over 40 mm nominal diameter, Handles, fixing screws and clamps
12/1/2001 - PDF - German -
Learn More€45.98 -
DIN 2283-1:2001-12
Geometrical Product Specifications (GPS) - "NOT GO" screw plug gauges - Part 1: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
12/1/2001 - PDF - German -
Learn More€32.34 -
BS EN ISO 10360-3:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs with the axis of rotary table as fourth
10/15/2001 - PDF - English -
Learn More€250.00 -
BS EN ISO 10360-1:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Vocabulary
10/15/2001 - PDF - English -
Learn More€348.00 -
BS EN ISO 5436-1:2001
Geometrical Product Specifications (GPS). Surface texture: Profile method, Measurement standards Geometric product specifications texture. method calibration.
8/23/2001 - PDF - English -
Learn More€250.00 -
UNE-EN ISO 10360-3:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis. (ISO 10360-3:2000)
5/22/2001 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 10360-3:2001 (R2008)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis. (ISO 10360-3:2000)
5/22/2001 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 5436-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures. (ISO 5436-1:2000)
4/30/2001 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 5436-1:2001 (R2008)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures. (ISO 5436-1:2000)
4/30/2001 - PDF - English -
Learn More€81.60 -
NF EN ISO 10360-1, E11-150-1 (03/2001)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1 : vocabulary - Spécification géométrique des produits (GPS)
3/1/2001 - Paper - English, French -
Learn More€118.00 -
NF E02-353 (01/2001) (R2011)
Geometrical products specification (GPS) - Chased parts - Dimensional and surface eveness tolerances for dimensions and parts without individual tolerances - Spécification géométrique des produits (GPS)
1/1/2001 - Paper - French -
Learn More€86.67 -
DIN EN ISO 5436-1:2000-11
GPS -Surface texture: Profile method, Measurement standards - Part 1: Material measures (ISO 5436-1:2000), English version of DIN EN ISO 5436-1
11/1/2000 - PDF - English -
Learn More€107.48 -
DIN EN ISO 5436-1:2000-11
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures (ISO 5436-1:2000), German version EN ISO 5436-1:2000
11/1/2000 - PDF - German -
Learn More€85.79 -
NF EN ISO 10360-3, E11-150-3 (08/2000)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3 : CMMs with the axis of a rotary table as the fourth axis - Spécification géométrique des produits (GPS)
8/1/2000 - Paper - French -
Learn More€86.67 -
DIN EN ISO 10360-3:2000-08
Geometrical Product Specifications (GPS) - Acceptance test and reverification test for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis (ISO 10360-3:2000), German version EN ISO 10360-3:2000
8/1/2000 - PDF - German -
Learn More€59.63 -
NF EN ISO 5436-1, E05-053-1 (08/2000)
Geometrical product specifications (GPS) - Surface texture : profile method : measurement standards - Part 1 : material measures - Spécification géométrique des produits (GPS)
8/1/2000 - Paper - French -
Learn More€86.67 -
DIN EN ISO 10360-3:2000-08
GPS - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis (ISO 10360-3:2000), English version of DIN EN ISO 10360-3
8/1/2000 - PDF - English -
Learn More€74.58 -
BS EN ISO 14660-1:2000
Geometrical product specifications (GPS). features General terms and definitions
7/15/2000 - PDF - English -
Learn More€180.00 -
UNE-EN ISO 8785:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GSP). SURFACE IMPERFECTIONS. TERMS, DEFINITIONS AND PARAMETERS (ISO 8785:1998)
2/28/2000 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 8785:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GSP). SURFACE IMPERFECTIONS. TERMS, DEFINITIONS AND PARAMETERS (ISO 8785:1998)
2/28/2000 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 3650:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS (ISO 3650:1998)
1/21/2000 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 3650:2000 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). LENGTH STANDARDS. GAUGE BLOCKS (ISO 3650:1998)
1/21/2000 - PDF - Spanish -
Learn More€68.00 -
NF EN ISO 8785, E05-019 (12/1999)
Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters - Spécification géométrique des produits (GPS)
12/1/1999 - Paper - English, French -
Learn More€90.00 -
BS EN ISO 8785:1999
Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters
10/15/1999 - PDF - English -
Learn More€250.00 -
DIN EN ISO 8785:1999-10
Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998), German version EN ISO 8785:1999
10/1/1999 - PDF - German -
Learn More€59.63 -
BS EN ISO 3650:1999
Geometrical product specifications (GPS). Length standards. Gauge blocks
5/15/1999 - PDF - English -
Learn More€250.00 -
NF EN ISO 3650, E11-010 (03/1999)
Geometrical product specifications (GPS) - Length standards - Gauge blocks - Spécification géométrique des produits (GPS)
3/1/1999 - Paper - French -
Learn More€99.33 -
DIN EN ISO 3650:1999-02
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998)
2/1/1999 - PDF - English -
Learn More€91.12 -
DIN EN ISO 3650:1999-02
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998), German version EN ISO 3650:1998
2/1/1999 - PDF - German -
Learn More€72.80 -
UNE-EN ISO 13565-1:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD, SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS (ISO 13565-1:1996).
8/11/1998 - PDF - English -
Learn More€68.40 -
UNE-EN ISO 13565-1:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD, SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS (ISO 13565-1:1996).
8/11/1998 - PDF - Spanish -
Learn More€57.00 -
UNE-EN ISO 3274:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
6/18/1998 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 3274:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
6/18/1998 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 12085:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. MOTIF PARAMETERS. (ISO 12085:1996).
5/27/1998 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 12085:1998 (R2008)
GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. MOTIF PARAMETERS. (ISO 12085:1996).
5/27/1998 - PDF - English -
Learn More€81.60 -
DIN EN ISO 12085:1998-05
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997
5/1/1998 - PDF - German -
Learn More€79.72 -
DIN EN ISO 12085:1998-05
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997
5/1/1998 - PDF - English -
Learn More€99.44 -
DIN EN ISO 13565-1:1998-04
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997
4/1/1998 - PDF - German -
Learn More€52.90 -
DIN EN ISO 3274:1998-04
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997
4/1/1998 - PDF - German -
Learn More€72.80 -
DIN EN ISO 13565-1:1998-04
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997
4/1/1998 - PDF - English -
Learn More€66.07 -
DIN EN ISO 3274:1998-04
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997
4/1/1998 - PDF - English -
Learn More€91.12 -
NF EN ISO 3274, E05-052 (03/1998)
Geometrical product specifications (GPS) - Surface texture : profile method - Nominal characteristics of contact (stylus) instruments - Spécification géométrique des produits (GPS)
3/1/1998 - Paper - French -
Learn More€86.67 -
NF EN ISO 13565-1, E05-021 (03/1998)
Geometrical Product Specifications (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 1 : filtering and general measurement conditions - Spécification géométrique des produits (GPS)
3/1/1998 - Paper - French -
Learn More€75.50 -
NF EN ISO 12085, E05-020 (03/1998)
Geometrical Product Specifications (GPS) - Surface texture : profile method - Motif parameters - Spécification géométrique des produits (GPS)
3/1/1998 - Paper - French -
Learn More€99.33 -
NF E11-097 (02/1998)
Geometrical product specification (GPS). Length measuring instruments. Screw micrometers depth gauges. Specifications. Test methods. - Spécification géométrique des produits (GPS)
2/1/1998 - Paper - French -
Learn More€99.33 -
BS EN ISO 13565-1:1998
Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Filtering and general measurement conditions
5/15/1997 - PDF - English -
Learn More€180.00 -
BS EN ISO 3274:1998
Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments
5/15/1997 - PDF - English -
Learn More€180.00 -
NF E11-017 (12/1996) (R2002)
Geometrical product specification (gps). Length measuring instruments. Standard wires. Specifications. Test methods. - Spécification géométrique des produits (GPS)
12/1/1996 - Paper - French -
Learn More€60.67
