Geometrical Product Specification (GPS)
The geometrical product specification (GPS) is a standard method which aims to define for a part what is admissible for its geometric and functional characteristics to be good . These specifications can give shape, dimensions, surface finish, etc. of this room.
The ICS code 17.040.40 groups together all the standards on the subject!
|
For which industries :
- Automotive
- Aeronautics
- Railway
Find our selection :
|
|
-
BS EN ISO 286-2:2010
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations holes shafts
8/31/2013 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 286-1:2010
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits
8/31/2013 - PDF - English - BSI
Learn More€331.00 -
NF E02-352 (08/2013)
Geometrical product specifications (GPS) - General tolerances (dimensional and geometrical) for cutted and bended workpieces - Spécification géométrique des produits (GPS)
8/1/2013 - Paper - French - AFNOR
Learn More€99.33 -
ISO 14253-2:2011/Cor 1:2013
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
7/15/2013 - Paper - English - ISO
Learn More€0.00 -
ISO 14253-2:2011/Cor 1:2013
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
7/15/2013 - Paper - French - ISO
Learn More€0.00 -
PD ISO/TS 17863:2013
Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
6/30/2013 - PDF - English - BSI
Learn More€250.00 -
DIN EN ISO 16610-21:2013-06
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
6/1/2013 - PDF - English - DIN
Learn More€115.98 -
DIN EN ISO 16610-21:2013-06
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011), German version EN ISO 16610-21:2012
6/1/2013 - PDF - German - DIN
Learn More€92.62 -
BS EN ISO 16610-85:2013
Geometrical product specifications (GPS). Filtration Morphological areal filters: Segmentation
5/31/2013 - PDF - English - BSI
Learn More€293.00 -
UNE-EN ISO 13102:2013
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
5/8/2013 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 13102:2013
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
5/8/2013 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 16610-21:2013
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
5/8/2013 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN ISO 16610-21:2013
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
5/8/2013 - PDF - English - AENOR
Learn More€85.20 -
UNE-EN ISO 25178-3:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
5/8/2013 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 25178-3:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
5/8/2013 - PDF - English - AENOR
Learn More€81.60 -
DIN EN ISO 5459:2013-05
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
5/1/2013 - PDF - English - DIN
Learn More€230.75 -
DIN EN ISO 16610-85:2013-05
Geometrical product specifications (GPS) - Filtration - Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013), German version EN ISO 16610-85:2013
5/1/2013 - PDF - German - DIN
Learn More€99.35 -
DIN EN ISO 16610-85:2013-05
Geometrical product specifications (GPS) - Filtration - Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013)
5/1/2013 - PDF - English - DIN
Learn More€124.21 -
DIN EN ISO 5459:2013-05
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011), German version EN ISO 5459:2011
5/1/2013 - PDF - German - DIN
Learn More€184.58 -
ISO/TS 17863:2013 (R2022)
Geometrical product specification (GPS)
Tolerancing of moveable assemblies
4/18/2013 - Paper - French - ISO
Learn More€110.00 -
ISO/TS 17863:2013 (R2022)
Geometrical product specification (GPS)
Tolerancing of moveable assemblies
4/18/2013 - Paper - English - ISO
Learn More€110.00 -
13/30272930 DC:2013
BS EN ISO 4287 AMD2. Geometrical Product Specifications (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
4/15/2013 - PDF - English - BSI
Learn More€24.00 -
DIN EN ISO 17450-2:2013-04
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012), German version EN ISO 17450-2:2012
4/1/2013 - PDF - German - DIN
Learn More€85.79 -
DIN EN ISO 17450-2:2013-04
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
4/1/2013 - PDF - English - DIN
Learn More€107.48 -
DIN EN ISO 5436-2:2013-04
Geometrical product specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012), German version EN ISO 5436-2:2012
4/1/2013 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 5436-2:2013-04
Geometrical product specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
4/1/2013 - PDF - English - DIN
Learn More€99.44 -
JIS B 0601:2013 (R2017)
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
3/21/2013 - PDF - Japanese - JSA
Learn More€46.02 -
FD ISO/TR 14253-6, E10-201-6 (03/2013)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6 : generalized decision rules for the acceptance and rejection of instruments and workpieces - Spécification géométrique des produits (GPS)
3/1/2013 - Paper - French - AFNOR
Learn More€75.67 -
13/30273328 DC:2013
BS ISO 16610-32. Geometrical product specifications (GPS). Filtration. Part 32. Robust profile filters: Spline filters
1/14/2013 - PDF - English - BSI
Learn More€24.00 -
UNE-EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
12/19/2012 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
12/19/2012 - PDF - English - AENOR
Learn More€88.80 -
DIN EN ISO 13102:2012-12
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012), German version EN ISO 13102:2012
12/1/2012 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 13102:2012-12
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
12/1/2012 - PDF - English - DIN
Learn More€91.12 -
NF E04-009 (12/2012)
Geometrical product specification (GPS) - Hierarchical organization of product/process characteristics - Spécification géométrique des produits (GPS)
12/1/2012 - Paper - French - AFNOR
Learn More€99.33 -
NF EN ISO 5436-2, E05-053-2 (12/2012)
Geometrical Product Specifications (GPS) - Surface texture : profile method - Measurement standards - Part 2 : software measurement standards - Spécification géométrique des produits (GPS)
12/1/2012 - Paper - French - AFNOR
Learn More€75.67 -
ISO/TR 14253-6:2012
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
11/15/2012 - Paper - French - ISO
Learn More€110.00 -
ISO/TR 14253-6:2012
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
11/15/2012 - Paper - English - ISO
Learn More€110.00 -
UNE-EN ISO 25378:2012
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
11/14/2012 - PDF - Spanish - AENOR
Learn More€104.00 -
UNE-EN ISO 25378:2012
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
11/14/2012 - PDF - English - AENOR
Learn More€124.80 -
DIN EN ISO 25178-3:2012-11
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012), German version EN ISO 25178-3:2012
11/1/2012 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 25178-3:2012-11
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
11/1/2012 - PDF - English - DIN
Learn More€99.44 -
NF EN ISO 16610-21, E05-040-21 (11/2012)
Geometrical product specifications (GPS) - Filtration - Part 21 : linear profile filters : gaussian filters - Spécification géométrique des produits (GPS)
11/1/2012 - Paper - French - AFNOR
Learn More€86.67 -
NF EN ISO 17450-2, E04-001-2 (11/2012)
Geometrical product specifications (GPS) - General concepts - Part 2 : basic tenets, specifications, operators, uncertainties and ambiguities - Spécification géométrique des produits (GPS)
11/1/2012 - Paper - French - AFNOR
Learn More€75.67 -
BS EN ISO 17450-2:2012
Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities
10/31/2012 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 5436-2:2012
Geometrical product specifications (GPS). Surface texture: Profile method, Measurement standards Software measurement
10/31/2012 - PDF - English - BSI
Learn More€250.00 -
UNE-EN ISO 5459:2012
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
10/3/2012 - PDF - Spanish - AENOR
Learn More€126.00 -
UNE-EN ISO 5459:2012
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
10/3/2012 - PDF - English - AENOR
Learn More€151.20 -
UNE-EN ISO 14253-3:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
10/3/2012 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 14253-3:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
10/3/2012 - PDF - English - AENOR
Learn More€75.60 -
NF EN ISO 13102, E11-058 (10/2012)
Geometrical product specifications (GPS) - dimensional measuring equipment : electronic digital-indicator gauge - Design and metrological characteristics - Spécification géométrique des produits (GPS)
10/1/2012 - Paper - French - AFNOR
Learn More€75.67 -
BS EN ISO 13102:2012
Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
9/30/2012 - PDF - English - BSI
Learn More€250.00 -
ISO 17450-2:2012 (R2023)
Geometrical product specifications (GPS)
General concepts
9/24/2012 - Paper - French - ISO
Learn More€110.00 -
ISO 17450-2:2012 (R2023)
Geometrical product specifications (GPS)
General concepts
9/24/2012 - Paper - English - ISO
Learn More€110.00 -
BS EN ISO 16610-21:2012
Geometrical product specifications (GPS). Filtration Linear profile filters: Gaussian filters
8/31/2012 - PDF - English - BSI
Learn More€293.00 -
12/30262704 DC:2012
BS EN ISO 3040 AMD1. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
8/13/2012 - PDF - English - BSI
Learn More€24.00 -
DIN EN ISO 13225:2012-08
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012), German version EN ISO 13225:2012
8/1/2012 - PDF - German - DIN
Learn More€92.62 -
DIN EN ISO 13225:2012-08
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
8/1/2012 - PDF - English - DIN
Learn More€115.98 -
BS EN ISO 25178-3:2012
Geometrical product specifications (GPS). Surface texture: Areal Specification operators
7/31/2012 - PDF - English - BSI
Learn More€250.00 -
UNE-EN ISO 14253-2:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
7/25/2012 - PDF - Spanish - AENOR
Learn More€124.00 -
UNE-EN ISO 14253-2:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
7/25/2012 - PDF - English - AENOR
Learn More€148.80 -
UNE-EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
7/11/2012 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
7/11/2012 - PDF - English - AENOR
Learn More€63.60 -
NF EN ISO 13225, E11-106 (07/2012)
Geometrical product specifications (GPS) - Dimensional measuring instruments - Height gauges - Design and metrological characteristics - Spécification géométrique des produits (GPS)
7/1/2012 - Paper - French - AFNOR
Learn More€86.67 -
UNE-EN ISO 15530-3:2011
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) (Endorsed by AENOR in July of 2012.)
7/1/2012 - PDF - English - AENOR
Learn More€66.00 -
UNE-EN ISO 22432:2011
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) (Endorsed by AENOR in July of 2012.)
7/1/2012 - PDF - English - AENOR
Learn More€90.00 -
UNE-EN ISO 8015:2012
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
6/20/2012 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 8015:2012
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
6/20/2012 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 10360-7:2012
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
6/13/2012 - PDF - Spanish - AENOR
Learn More€87.00 -
UNE-EN ISO 10360-7:2012
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
6/13/2012 - PDF - English - AENOR
Learn More€104.40 -
UNE-EN ISO 12780-1:2012
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
6/6/2012 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12780-1:2012
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
6/6/2012 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 12780-2:2012
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
6/6/2012 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 12780-2:2012
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
6/6/2012 - PDF - English - AENOR
Learn More€72.00 -
DIN EN ISO 17450-1:2012-04
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011), German version EN ISO 17450-1:2011
4/1/2012 - PDF - German - DIN
Learn More€148.04 -
DIN EN ISO 17450-1:2012-04
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
4/1/2012 - PDF - English - DIN
Learn More€184.86 -
DIN EN ISO 1119:2012-04
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011), German version EN ISO 1119:2011
4/1/2012 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 1119:2012-04
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
4/1/2012 - PDF - English - DIN
Learn More€82.52 -
DIN EN ISO 22432:2012-03
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011), German version EN ISO 22432:2011
3/1/2012 - PDF - German - DIN
Learn More€131.96 -
DIN EN ISO 22432:2012-03
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
3/1/2012 - PDF - English - DIN
Learn More€164.95 -
UNE-EN ISO 12781-2:2012
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
2/15/2012 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 12781-2:2012
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
2/15/2012 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 12180-1:2012
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
2/8/2012 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12180-1:2012
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
2/8/2012 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 12781-1:2012
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
2/8/2012 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 12781-1:2012
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
2/8/2012 - PDF - English - AENOR
Learn More€72.00 -
12/30242157 DC:2012
BS EN ISO 14253-1 AMD1. Geometrical Product Specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformance or non-conformance with specifications
2/6/2012 - PDF - English - BSI
Learn More€24.00 -
NF EN ISO 17450-1, E04-001-1 (02/2012)
Geometrical product specifications (GPS) - General concepts - Part 1 : model for geometrical specification and verification - Spécification géométrique des produits (GPS)
2/1/2012 - Paper - French - AFNOR
Learn More€144.67 -
UNE-EN ISO 3611:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
2/1/2012 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 3611:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
2/1/2012 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 9493:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
2/1/2012 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 9493:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
2/1/2012 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 12180-2:2012
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
2/1/2012 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12180-2:2012
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
2/1/2012 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 12181-1:2012
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
2/1/2012 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 12181-1:2012
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
2/1/2012 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 12181-2:2012
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
2/1/2012 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 12181-2:2012
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
2/1/2012 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 14406:2012
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
2/1/2012 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 14406:2012
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
2/1/2012 - PDF - English - AENOR
Learn More€81.60 -
BS EN ISO 17450-1:2011
Geometrical product specifications (GPS). General concepts Model for geometrical specification and verification
1/31/2012 - PDF - English - BSI
Learn More€377.00 -
BS EN ISO 1119:2011
Geometrical product specifications (GPS). Series of conical tapers and taper angles
1/31/2012 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 22432:2011
Geometrical product specifications (GPS). Features utilized in specification and verification
12/31/2011 - PDF - English - BSI
Learn More€348.00 -
ISO 17450-1:2011 (R2022)
Geometrical product specifications (GPS)
General concepts
12/5/2011 - Paper - French - ISO
Learn More€223.00 -
ISO 17450-1:2011 (R2022)
Geometrical product specifications (GPS)
General concepts
12/5/2011 - Paper - English - ISO
Learn More€223.00 -
DIN EN ISO 25378:2011-12
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011), German version EN ISO 25378:2011
12/1/2011 - PDF - German - DIN
Learn More€141.96 -
DIN EN ISO 25378:2011-12
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
12/1/2011 - PDF - English - DIN
Learn More€177.38 -
NF EN ISO 15530-3, E11-160-3 (12/2011)
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM) : technique for determining the uncertainty of measurement - Part 3 : use of calibrated workpieces or measurement standards - Spécification géométrique des produits (GPS)
12/1/2011 - Paper - French - AFNOR
Learn More€75.67 -
ISO 22432:2011 (R2022)
Geometrical product specifications (GPS)
Features utilized in specification and verification
11/8/2011 - Paper - French - ISO
Learn More€199.00 -
ISO 22432:2011 (R2022)
Geometrical product specifications (GPS)
Features utilized in specification and verification
11/8/2011 - Paper - English - ISO
Learn More€199.00 -
NF EN ISO 5459, E04-554 (11/2011)
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum-systems - Spécification géométrique des produits (GPS)
11/1/2011 - Paper - French - AFNOR
Learn More€154.67 -
BS EN ISO 15530-3:2011
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use calibrated workpieces or standards
10/31/2011 - PDF - English - BSI
Learn More€250.00 -
DIN EN ISO 14253-3:2011-10
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011), German version EN ISO 14253-3:2011
10/1/2011 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 14253-3:2011-10
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
10/1/2011 - PDF - English - DIN
Learn More€91.12 -
BS EN ISO 8015:2011
Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
9/30/2011 - PDF - English - BSI
Learn More€180.00 -
DIN EN ISO 8015:2011-09
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011), German version EN ISO 8015:2011
9/1/2011 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 8015:2011-09
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
9/1/2011 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 10360-7:2011-09
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011), German version EN ISO 10360-7:2011
9/1/2011 - PDF - German - DIN
Learn More€120.84 -
DIN EN ISO 10360-7:2011-09
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
9/1/2011 - PDF - English - DIN
Learn More€150.93 -
BS EN ISO 5459:2011
Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
8/31/2011 - PDF - English - BSI
Learn More€377.00 -
NF EN ISO 8015, E04-561 (08/2011)
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules - Spécification géométrique des produits (GPS)
8/1/2011 - Paper - French - AFNOR
Learn More€60.50 -
NF EN ISO 10360-7, E11-150-7 (08/2011)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 : CMMs equipped with imaging probing systems - Spécification géométrique des produits (GPS)
8/1/2011 - Paper - French - AFNOR
Learn More€108.00 -
DIN EN ISO 12781-1:2011-07
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011), German version EN ISO 12781-1:2011
7/1/2011 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 12781-1:2011-07
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
7/1/2011 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 12781-2:2011-07
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011), German version EN ISO 12781-2:2011
7/1/2011 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 12781-2:2011-07
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
7/1/2011 - PDF - English - DIN
Learn More€99.44 -
DIN EN ISO 12180-1:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011), German version EN ISO 12180-1:2011
7/1/2011 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 12180-1:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
7/1/2011 - PDF - English - DIN
Learn More€99.44 -
DIN EN ISO 12180-2:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011), German version EN ISO 12180-2:2011
7/1/2011 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 12180-2:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
7/1/2011 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 12181-1:2011-07
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011), German version EN ISO 12181-1:2011
7/1/2011 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 12181-1:2011-07
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
7/1/2011 - PDF - English - DIN
Learn More€99.44 -
DIN EN ISO 12181-2:2011-07
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011), German version EN ISO 12181-2:2011
7/1/2011 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 12181-2:2011-07
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
7/1/2011 - PDF - English - DIN
Learn More€82.52 -
DIN EN ISO 12780-2:2011-07
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011), German version EN ISO 12780-2:2011
7/1/2011 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 12780-2:2011-07
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
7/1/2011 - PDF - English - DIN
Learn More€82.52 -
NF EN ISO 14253-3, E10-201-3 (07/2011)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3 : guidelines for achieving agreements on measurement uncertainty statements - Spécification géométrique des produits (GPS)
7/1/2011 - Paper - French - AFNOR
Learn More€75.67 -
NF EN ISO 14253-2, E10-201-2 (07/2011)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2 : guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Spécification géométrique des produits (GPS)
7/1/2011 - Paper - French - AFNOR
Learn More€144.67 -
BS EN ISO 10360-7:2011
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs equipped with imaging probing systems
6/30/2011 - PDF - English - BSI
Learn More€331.00 -
NBN EN ISO 14253-2:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
6/17/2011 - PDF - French - NBN
Learn More€205.00 -
NBN EN ISO 14253-2:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
6/17/2011 - PDF - German - NBN
Learn More€205.00 -
NBN EN ISO 14253-2:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
6/17/2011 - PDF - English - NBN
Learn More€205.00 -
NF EN ISO 25378, E04-571 (06/2011)
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions - Spécification géométrique des produits
6/1/2011 - Paper - French - AFNOR
Learn More€144.67 -
BS EN ISO 25378:2011
Geometrical product specifications (GPS). Characteristics and conditions. Definitions
5/31/2011 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 12180-1:2011
Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form
5/31/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 14253-3:2011
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on uncertainty statements
5/31/2011 - PDF - English - BSI
Learn More€250.00 -
UNE-EN ISO 25178-601:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
5/11/2011 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 25178-601:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
5/11/2011 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 25178-602:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
5/11/2011 - PDF - Spanish - AENOR
Learn More€77.00 -
UNE-EN ISO 25178-602:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
5/11/2011 - PDF - English - AENOR
Learn More€92.40 -
UNE-EN ISO 25178-701:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
5/11/2011 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 25178-701:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
5/11/2011 - PDF - English - AENOR
Learn More€88.80 -
NF EN ISO 12181-1, E10-113-1 (05/2011)
Geometrical product specifications (GPS) - Roundness - Part 1 : vocabulary and parameters of roundness - Spécification géométrique des produits (GPS)
5/1/2011 - Paper - French - AFNOR
Learn More€75.67 -
NF EN ISO 12181-2, E10-113-2 (05/2011)
Geometrical product specifications (GPS) - Roundness - Part 2 : specification operators - Spécification géométrique des produits (GPS)
5/1/2011 - Paper - French - AFNOR
Learn More€60.67 -
BS EN ISO 12180-2:2011
Geometrical product specifications (GPS). Cylindricity Specification operators
4/30/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 12181-1:2011
Geometrical product specifications (GPS). Roundness Vocabulary and parameters of roundness
4/30/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 12181-2:2011
Geometrical product specifications (GPS). Roundness Specification operators
4/30/2011 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 12780-1:2011
Geometrical product specifications (GPS). Straightness Vocabulary and parameters of straightness
4/30/2011 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 12780-2:2011
Geometrical product specifications (GPS). Straightness Specification operators
4/30/2011 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 12781-1:2011
Geometrical product specifications (GPS). Flatness Vocabulary and parameters of flatness
4/30/2011 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 12781-2:2011
Geometrical product specifications (GPS). Flatness Specification operators
4/30/2011 - PDF - English - BSI
Learn More€250.00 -
ISO 14253-3:2011 (R2021)
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
4/12/2011 - Paper - French - ISO
Learn More€72.00 -
ISO 14253-2:2011 (R2023)
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
4/12/2011 - Paper - French - ISO
Learn More€223.00 -
ISO 14253-3:2011 (R2021)
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
4/12/2011 - Paper - English - ISO
Learn More€72.00 -
DIN EN ISO 14406:2011-04
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010), German version EN ISO 14406:2010
4/1/2011 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 14406:2011-04
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
4/1/2011 - PDF - English - DIN
Learn More€99.44 -
ISO 25378:2011 (R2021)
Geometrical product specifications (GPS)
Characteristics and conditions
3/29/2011 - Paper - French - ISO
Learn More€223.00 -
ISO 25378:2011 (R2021)
Geometrical product specifications (GPS)
Characteristics and conditions
3/29/2011 - Paper - English - ISO
Learn More€223.00 -
UNE-EN ISO 286-2:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
3/2/2011 - PDF - Spanish - AENOR
Learn More€99.00 -
UNE-EN ISO 286-2:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
3/2/2011 - PDF - English - AENOR
Learn More€118.80 -
DIN EN ISO 3611:2011-03
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010), German version EN ISO 3611:2010
3/1/2011 - PDF - German - DIN
Learn More€92.62 -
DIN EN ISO 3611:2011-03
Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
3/1/2011 - PDF - English - DIN
Learn More€115.98 -
DIN EN ISO 9493:2011-03
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010), German version EN ISO 9493:2010
3/1/2011 - PDF - German - DIN
Learn More€85.79 -
DIN EN ISO 9493:2011-03
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
3/1/2011 - PDF - English - DIN
Learn More€107.48 -
UNE-EN ISO 286-1:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
2/23/2011 - PDF - Spanish - AENOR
Learn More€85.00 -
UNE-EN ISO 286-1:2011
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
2/23/2011 - PDF - English - AENOR
Learn More€102.00 -
NF EN ISO 9493, E11-054 (02/2011)
Geometrical product specifications (GPS) - Dimensional measuring equipment : dial test indicators (lever type) - Design and metrological characteristics - Spécification géométrique des produits (GPS)
2/1/2011 - Paper - French - AFNOR
Learn More€86.67 -
€250.00
-
DIN EN ISO 25178-601:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010), German version EN ISO 25178-601:2010
1/1/2011 - PDF - German - DIN
Learn More€85.79 -
DIN EN ISO 25178-601:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
1/1/2011 - PDF - English - DIN
Learn More€107.48 -
DIN EN ISO 25178-602:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010), German version EN ISO 25178-602:2010
1/1/2011 - PDF - German - DIN
Learn More€104.95 -
DIN EN ISO 25178-602:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
1/1/2011 - PDF - English - DIN
Learn More€131.40 -
DIN EN ISO 25178-701:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010), German version EN ISO 25178-701:2010
1/1/2011 - PDF - German - DIN
Learn More€99.35 -
DIN EN ISO 25178-701:2011-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
1/1/2011 - PDF - English - DIN
Learn More€124.21 -
UNE-EN ISO 10360-2:2010
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
12/15/2010 - PDF - Spanish - AENOR
Learn More€77.00 -
UNE-EN ISO 10360-2:2010
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
12/15/2010 - PDF - English - AENOR
Learn More€92.40 -
UNE-EN ISO 25178-6:2010
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
12/15/2010 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 25178-6:2010
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
12/15/2010 - PDF - English - AENOR
Learn More€72.00 -
€110.00
-
€110.00
-
DIN CEN ISO/TS 14253-4*DIN SPEC 1177:2010-11
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010), German version CEN ISO/TS 14253-4:2010
11/1/2010 - PDF - German - DIN
Learn More€63.64 -
JIS B 0642:2010 (R2015)
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment
9/21/2010 - PDF - Japanese - JSA
Learn More€46.02 -
NF EN ISO 286-2, E02-100-2 (09/2010)
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts - Spécification géométrique des produits (GPS)
9/1/2010 - Paper - French - AFNOR
Learn More€130.67 -
NF EN ISO 286-1, E02-100-1 (09/2010)
Geometrical product specification (GPS) - ISO code system for tolerances of linear sizes - Part 1 : basis of tolerances, deviations and fits - Spécification géométrique des produits (GPS)
9/1/2010 - Paper - French - AFNOR
Learn More€108.33 -
NF EN ISO 25178-602, E05-031-602 (08/2010)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 602 : nominal characteristics of non-contact (confocal chromatic probe) instruments - Spécification géométrique des produits (GPS)
8/1/2010 - Paper - French - AFNOR
Learn More€99.33 -
NF EN ISO 25178-701, E05-031-701 (08/2010)
Geometrical product specifications (GPS) - Surface texture : areal - Part 701 : calibration and measurement standards for contact (stylus) instruments - Spécification géométrique des produits (GPS)
8/1/2010 - Paper - French - AFNOR
Learn More€86.50 -
NF EN ISO 25178-601, E05-031-601 (08/2010)
Geometrical product specifications (GPS) - Surface texture : areal - Part 601 : nominal characteristics of contact (stylus) instruments - Spécification géométrique des produits (GPS)
8/1/2010 - Paper - French - AFNOR
Learn More€75.67 -
BS EN ISO 25178-601:2010
Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of contact (stylus) instruments
7/31/2010 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 25178-602:2010
Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments
7/31/2010 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 25178-701:2010
Geometrical product specifications (GPS). Surface texture. Areal Calibration and measurement standards for contact (stylus) instruments
7/31/2010 - PDF - English - BSI
Learn More€293.00 -
XP CEN ISO/TS 14253-4, E10-201-4 (07/2010)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4 : Background on functional limits and specification limits in decision rules - Spécification géométrique des produits (GPS)
7/1/2010 - Paper - French - AFNOR
Learn More€75.67