Geometrical Product Specification (GPS) Industry Technical dossiers

NF EN ISO 8062-3, A00-510-3 (03/2023)

Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3 : General dimensional and geometrical tolerances and machining allowances for castings
3/1/2023 - Papier - French - AFNOR
Learn More

€99.33

NF EN ISO 25178-700, E05-031-700 (01/2023)

Geometrical product specifications (GPS) - Surface texture : Areal - Part 700 : Calibration, adjustment and verification of areal topography measuring instruments
1/1/2023 - Papier - French - AFNOR
Learn More

€99.33

NF E04-007 (12/2022)

Geometrical product specifications (GPS) - Discrete modal decomposition - Analysis method
12/1/2022 - Papier - French - AFNOR
Learn More

€108.33

NF EN ISO 12179, E05-056 (01/2022)

Geometrical product specifications (GPS) - Surface texture : Profile method - Calibration of contact (stylus) instruments
1/1/2022 - Papier - French - AFNOR
Learn More

€75.67

NF EN ISO 25178-2, E05-031-2 (01/2022)

Geometrical product specifications (GPS) - Surface texture : Areal - Part 2 : Terms, definitions and surface texture parameters
1/1/2022 - Papier - French - AFNOR
Learn More

€144.67

NF EN ISO 21920-1, E05-016-1 (01/2022)

Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture
1/1/2022 - Papier - French - AFNOR
Learn More

€119.00

NF EN ISO 21920-2, E05-016-2 (01/2022)

Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters
1/1/2022 - Papier - French - AFNOR
Learn More

€154.67

NF EN ISO 21920-3, E05-016-3 (01/2022)

Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators
1/1/2022 - Papier - French - AFNOR
Learn More

€99.33

NF E10-100-1 (10/2021)

Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 : general conditions of measurement - Spécification géométrique des produits (GPS)
10/1/2021 - Papier - French - AFNOR
Learn More

€86.67

NF EN ISO 10360-13, E11-150-13 (09/2021)

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13 : Optical 3D CMS
9/1/2021 - Papier - French - AFNOR
Learn More

€130.67

NF EN ISO 10360-10, E11-150-10 (09/2021)

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10 : laser trackers for measuring point-to-point distances
9/1/2021 - Papier - French - AFNOR
Learn More

€119.00

Mémento de spécification géométrique des produits

Les normes ISO-GPS
6/30/2021 - Papier - French - DUNOD
Learn More

€26.54

NF EN ISO 2692, E04-555 (06/2021)

Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
6/1/2021 - Papier - French - AFNOR
Learn More

€130.50

21/30423738 DC:2021

BS ISO 199. Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values
5/25/2021 - PDF - English - BSI
Learn More

€24.00

NBN EN ISO 22081:2021

Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
3/24/2021 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 22081:2021

Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
3/24/2021 - PDF - English - NBN
Learn More

€89.00

BS EN ISO 22081:2021

Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical specifications and general size specifications
2/22/2021 - PDF - English - BSI
Learn More

€250.00

NF EN ISO 22081, E04-574 (02/2021)

Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications - Spécification géométrique des produits (GPS) - Tolérancement géométrique - Spécifications géométriques et dimensionnelles générales
2/1/2021 - Papier - French - AFNOR
Learn More

€75.67

UNE-EN ISO 14978:2021

Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/27/2021 - - - AENOR
Learn More

From: €98.00

DIN EN ISO 25178-72:2021-01

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017 + Amd 1:2020), German version EN ISO 25178-72:2017 + A1:2020
1/1/2021 - PDF - German - DIN
Learn More

€104.95

DIN EN ISO 10360-5:2020-11

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020), German version EN ISO 10360-5:2020
11/1/2020 - PDF - German - DIN
Learn More

€131.96

BS EN ISO 25178-72:2017+A1:2020

Geometrical product specifications (GPS). Surface texture: Areal XML file format x3p
10/1/2020 - PDF - English - BSI
Learn More

€293.00

NF EN ISO 25178-72/A1, E05-031-72/A1 (09/2020)

Geometrical product specifications (GPS) - Surface texture : areal - Part 72 : XML file format x3p - Amendment 1 - Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 72 : Format de fichier XML x3p AMENDEMENT 1
9/1/2020 - Papier - French - AFNOR
Learn More

€60.67

DIN EN ISO 13385-2:2020-09

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020), German and English version EN ISO 13385-2:2020
9/1/2020 - PDF - English, German - DIN
Learn More

€85.79

PD ISO/TR 23276:2020

Geometrical product specifications (GPS). Surface texture: Profile method. Flowchart for PSm, RSm, WSm and Pc, Rc, Wc
8/24/2020 - PDF - English - BSI
Learn More

€180.00

UNE-EN ISO 13385-2:2020

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
8/1/2020 - PDF - English - AENOR
Learn More

€68.00

DIN EN ISO 16610-29:2020-07

Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020), German version EN ISO 16610-29:2020
7/1/2020 - PDF - German - DIN
Learn More

€92.62

UNE-EN ISO 10360-5:2020

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More

€94.00

UNE-EN ISO 16610-29:2020

Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More

€72.00

BS EN ISO 13385-2:2020 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
6/3/2020 - PDF - English - BSI
Learn More

€235.00

BS EN ISO 13385-2:2020

Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
6/1/2020 - PDF - English - BSI
Learn More

€180.00

NF EN ISO 13385-2, E11-085-2 (05/2020)

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : design and metrological characteristics of calliper depth gauges - Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 2 : Jauges de profondeur , caractéristiques de conception et caractéristiques métrologiques
5/1/2020 - Papier - French - AFNOR
Learn More

€75.67

DIN EN ISO 16610-61:2020-05

Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters: Gaussian filters (ISO 16610-61:2015 + Amd 1:2019), German version EN ISO 16610-61:2015 + A1:2020
5/1/2020 - PDF - German - DIN
Learn More

€104.95

UNE-EN ISO 25178-600:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English - AENOR
Learn More

€72.00

UNE-EN ISO 25178-607:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English - AENOR
Learn More

€72.00

UNE-EN ISO 20170:2019

Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English - AENOR
Learn More

€72.00

UNE-EN ISO 25178-73:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English - AENOR
Learn More

€65.00

UNE-EN ISO 13385-1:2019

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English - AENOR
Learn More

€69.00

BS EN ISO 16610-29:2020

Geometrical product specifications (GPS). Filtration Linear profile filters: Wavelets
4/28/2020 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 10360-5:2020

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Coordinate machines (CMMs) using single multiple stylus contacting probing discrete point and/or scanning mode
4/21/2020 - PDF - English - BSI
Learn More

€348.00

NF EN ISO 16610-29, E05-040-29 (04/2020)

Geometrical product specifications (GPS) - Filtration - Part 29 : linear profile filters : wavelets - Spécification géométrique des produits (GPS) - Filtrage - Partie 29 : Filtres de profil linéaires : Ondelettes splines
4/1/2020 - Papier - French - AFNOR
Learn More

€75.67

NF EN ISO 10360-5, E11-150-5 (04/2020)

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5 : coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode - Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des systèmes à mesurer tridimensionnelles (SMT) - Partie 5 : MMT utilisant des systèmes de palpage à stylet simple ou à stylets multiples utilisant un mode de mesurage par point discret et/ou par scan
4/1/2020 - Papier - French - AFNOR
Learn More

€119.00

BS EN ISO 16610-61:2015+A1:2020

Geometrical product specification (GPS). Filtration Linear areal filters. Gaussian filters
3/11/2020 - PDF - English - BSI
Learn More

€250.00

UNE-EN ISO 25178-72:2020

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
3/4/2020 - - - AENOR
Learn More

From: €74.00

DIN EN ISO 13385-1:2020-03

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019), German version EN ISO 13385-1:2019
3/1/2020 - PDF - German - DIN
Learn More

€85.79

BS EN ISO 25178-71:2017 + Redline

Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
2/27/2020 - PDF - English - BSI
Learn More

€235.00

BS ISO 464:2015 + Redline

Tracked Changes. Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
2/27/2020 - PDF - English - BSI
Learn More

€326.00

NBN EN ISO 16610-61:2015/A1:2020

Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
2/27/2020 - PDF - French - NBN
Learn More

€20.00

NBN EN ISO 16610-61:2015/A1:2020

Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
2/27/2020 - PDF - German - NBN
Learn More

€20.00

NBN EN ISO 16610-61:2015/A1:2020

Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
2/27/2020 - PDF - English - NBN
Learn More

€20.00

BS EN ISO 17450-3:2016 + Redline

Tracked Changes. Geometrical product specifications (GPS). General concepts Toleranced features
2/26/2020 - PDF - English - BSI
Learn More

€326.00

BS EN ISO 3040:2016 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
2/26/2020 - PDF - English - BSI
Learn More

€382.00

BS EN ISO 14405-1:2016 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes
2/25/2020 - PDF - English - BSI
Learn More

€454.00

BS EN ISO 14405-2:2019 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear or angular sizes
2/24/2020 - PDF - English - BSI
Learn More

€326.00

BS EN ISO 1101:2017 + Redline

Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
2/24/2020 - PDF - English - BSI
Learn More

€492.00

BS EN ISO 14253-1:2017 + Redline

Tracked Changes. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Decision rules for verifying conformity or nonconformity with
2/24/2020 - PDF - English - BSI
Learn More

€326.00

NF ISO 9628, E22-304 (02/2020)

Rolling bearings - Insert bearings and eccentric locking collars - Geometrical product specifications (GPS) and tolerance values
2/1/2020 - Papier - French - AFNOR
Learn More

€86.67

UNE-EN ISO 16610-61:2015/A1:2020

Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019) (Endorsed by Asociación Española de Normalización in February of 2020.)
2/1/2020 - PDF - English - AENOR
Learn More

€15.00

BS EN ISO 5458:2018 + Redline

Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
1/29/2020 - PDF - English - BSI
Learn More

€454.00

NF EN ISO 16610-61/A1, E05-040-61/A1 (01/2020)

Geometrical product specification (GPS) - Filtration - Part 61 : linear areal filters - Gaussian filters - Amendment 1
1/1/2020 - Papier - French - AFNOR
Learn More

€25.67

NF E11-015 (12/2019)

Geometrical product specifications (GPS) - Dimensional measuring equipment : measuring rods with spherical ends - Design and metrological requirements
12/1/2019 - Papier - French - AFNOR
Learn More

€48.00

BS EN ISO 14978:2018 + Redline

Tracked Changes. Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
11/27/2019 - PDF - English - BSI
Learn More

€454.00

DIN EN ISO 20170:2019-11

Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019), German version EN ISO 20170:2019
11/1/2019 - PDF - German - DIN
Learn More

€92.62

UNE-EN ISO 14405-2:2019

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
10/2/2019 - - - AENOR
Learn More

From: €74.00

DIN EN ISO 25178-73:2019-10

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019), German version EN ISO 25178-73:2019
10/1/2019 - PDF - German - DIN
Learn More

€72.80

BS EN ISO 13385-1:2019

Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of callipers
9/24/2019 - PDF - English - BSI
Learn More

€250.00

DIN EN ISO 286-1:2019-09

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013), German version EN ISO 286-1:2010 + AC:2013
9/1/2019 - PDF - German - DIN
Learn More

€115.33

DIN EN ISO 286-2:2019-09

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013), German version EN ISO 286-2:2010 + AC:2013
9/1/2019 - PDF - German - DIN
Learn More

€131.96

NF EN ISO 13385-1, E11-085-1 (09/2019)

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : design and metrological characteristics of callipers - Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 1 : Pieds à coulisse, caractéristiques de conception et caractéristiques métrologiques
9/1/2019 - Papier - French - AFNOR
Learn More

€75.67

NBN EN ISO 25178-73:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
7/24/2019 - PDF - French - NBN
Learn More

€58.00

NBN EN ISO 25178-73:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
7/24/2019 - PDF - German - NBN
Learn More

€58.00

NBN EN ISO 25178-73:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
7/24/2019 - PDF - English - NBN
Learn More

€58.00

NBN EN ISO 20170:2019

Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
6/26/2019 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 20170:2019

Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
6/26/2019 - PDF - English - NBN
Learn More

€121.00

BS EN ISO 25178-73:2019

Geometrical product specifications (GPS). Surface texture: Areal Terms and definitions for surface defects on material measures
6/18/2019 - PDF - English - BSI
Learn More

€180.00

DIN EN ISO 14978:2019-06

Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018), German version EN ISO 14978:2018
6/1/2019 - PDF - German - DIN
Learn More

€126.26

NF EN ISO 25178-73, E05-031-73 (06/2019)

Geometrical product specifications (GPS) - Surface texture : Areal - Part 73 : terms and definitions for surface defects on material measures - Spécification géométrique des produits (GPS) - État de surface : surfacique Partie 73 : Mesures matérialisées - Termes et définitions pour défauts de surface
6/1/2019 - Papier - French - AFNOR
Learn More

€48.00

DIN EN ISO 14405-2:2019-06

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018), German version EN ISO 14405-2:2019
6/1/2019 - PDF - German - DIN
Learn More

€92.62

BS EN ISO 20170:2019

Geometrical product specifications (GPS). Decomposition of geometrical characteristics for manufacturing control
5/22/2019 - PDF - English - BSI
Learn More

€250.00

ISO 20170:2019

Geometrical product specifications (GPS) — Decomposition of geometrical characteristics for manufacturing control
4/11/2019 - - - ISO
Learn More

€148.00

NF EN ISO 25178-607, E05-031-607 (04/2019)

Geometrical product specifications (GPS) - Surface texture : Areal - Part 607 : nominal characteristics of non-contact (confocal microscopy) instruments
4/1/2019 - Papier - French - AFNOR
Learn More

€86.67

NF EN ISO 25178-600, E05-031-600 (04/2019)

Geometrical product specifications (GPS) - Surface texture : Areal - Part 600 : metrological characteristics for areal-topography measuring methods
4/1/2019 - Papier - French - AFNOR
Learn More

€86.67

UNE-EN ISO 1938-2:2019

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/27/2019 - - - AENOR
Learn More

From: €68.00

UNE-EN ISO 14253-1:2019

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
3/27/2019 - - - AENOR
Learn More

From: €74.00

UNE-EN ISO 17450-4:2019

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
3/27/2019 - - - AENOR
Learn More

From: €68.00

BS EN ISO 14978:2018

Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
3/21/2019 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 14405-2:2019

Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear or angular sizes
1/28/2019 - PDF - English - BSI
Learn More

€250.00

NF EN ISO 14405-2, E04-563-2 (01/2019)

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear or angular sizes
1/1/2019 - Papier - French - AFNOR
Learn More

€86.67

UNE-EN ISO 16610-28:2018

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
12/5/2018 - - - AENOR
Learn More

From: €71.00

UNE-EN ISO 16610-31:2018

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/5/2018 - - - AENOR
Learn More

From: €68.00

NF EN ISO 14978, E11-001 (12/2018)

Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment
12/1/2018 - Papier - French - AFNOR
Learn More

€119.00

DIN EN ISO 5458:2018-11

Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018), German version EN ISO 5458:2018
11/1/2018 - PDF - German - DIN
Learn More

€126.26

DIN EN ISO 5458:2018-11

Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
11/1/2018 - PDF - English - DIN
Learn More

€157.66

XP E10-100-2 (10/2018)

Geometrical product specifications (GPS) - Dimensional measuring methods - Part 2 : evaluation of the geometrical deviations
10/1/2018 - Papier - French - AFNOR
Learn More

€154.67

DIN EN ISO 14253-2:2018-09

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011), German version EN ISO 14253-2:2011
9/1/2018 - PDF - German - DIN
Learn More

€174.39

DIN EN ISO 15530-3:2018-09

Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011), German version EN 15530-3:2011
9/1/2018 - PDF - German - DIN
Learn More

€85.79

DIN 878:2018-07

Geometrical product specifications (GPS) - Mechanical dial gauges - Limits for measurement errors
7/1/2018 - PDF - German - DIN
Learn More

€32.34

DIN 2241:2018-07

Geometrical product specifications (GPS) - Thread setting gauges for measuring instruments for ISO metric screw threads, setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter
7/1/2018 - PDF - German - DIN
Learn More

€52.90

DIN EN ISO 14253-1:2018-07

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017), German version EN ISO 14253-1:2017
7/1/2018 - PDF - German - DIN
Learn More

€92.62

BS EN ISO 5458:2018

Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
6/11/2018 - PDF - English - BSI
Learn More

€348.00

NF EN ISO 5458, E04-559 (06/2018)

Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification - Spécification géométrique des produits (GPS) - Tolérancement géométrique - Partie 2 : tolérancement de position et de motif
6/1/2018 - Papier - French - AFNOR
Learn More

€108.33

DIN EN ISO 17450-4:2018-05

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017), German version EN ISO 17450-4:2018
5/1/2018 - PDF - German - DIN
Learn More

€79.72

DIN EN ISO 17450-4:2018-05

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
5/1/2018 - PDF - English - DIN
Learn More

€99.44

PD ISO/TS 21619:2018

Geometrical product specifications (GPS). Types of documents with GPS
4/17/2018 - PDF - English - BSI
Learn More

€180.00

ISO/TS 21619:2018

Geometrical product specifications (GPS) — Types of documents with GPS
3/28/2018 - Papier - English - ISO
Learn More

€72.00

UNE-EN ISO 25178-71:2017

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
3/1/2018 - PDF - English - AENOR
Learn More

€60.00

NBN EN ISO 17450-4:2018

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
2/28/2018 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 17450-4:2018

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
2/28/2018 - PDF - German - NBN
Learn More

€89.00

NBN EN ISO 17450-4:2018

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
2/28/2018 - PDF - English - NBN
Learn More

€89.00

BS EN ISO 17450-4:2018

Geometrical product specifications (GPS). Basic concepts characteristics for quantifying GPS deviations
2/20/2018 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 14253-1:2017

Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Decision rules for verifying conformity or nonconformity with
2/7/2018 - PDF - English - BSI
Learn More

€250.00

NBN EN ISO 14253-1:2018

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
1/30/2018 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 14253-1:2018

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
1/30/2018 - PDF - English - NBN
Learn More

€121.00

DIN EN ISO 25178-71:2018-01

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-71:2017)
1/1/2018 - PDF - English - DIN
Learn More

€99.44

DIN EN ISO 25178-71:2018-01

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-71:2017), German version EN ISO 25178-71:2017
1/1/2018 - PDF - German - DIN
Learn More

€79.72

NF EN ISO 17450-4, E04-001-4 (01/2018)

Geometrical product specifications (GPS) - Basic concepts - Part 4 : Geometrical characteristics for quantifying GPS deviations - Spécification géométrique des produits (GPS) - Concepts généraux - Partie 4 : Caractéristiques géométriques pour la quantification des écarts de forme, d'orientation, de position et de battement
1/1/2018 - Papier - French - AFNOR
Learn More

€75.50

ISO 17450-4:2017 (R2023)

Geometrical product specifications (GPS) — Basic concepts
12/11/2017 - - - ISO
Learn More

€110.00

NF EN ISO 14253-1, E10-201-1 (12/2017)

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications - Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 1 : Règles de décision pour contrôler la conformité ou la non - conformité à la spécification
12/1/2017 - Papier - French - AFNOR
Learn More

€86.50

NBN EN ISO 25178-71:2017

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
11/22/2017 - PDF - French - NBN
Learn More

€58.00

NBN EN ISO 25178-71:2017

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
11/22/2017 - PDF - German - NBN
Learn More

€58.00

NBN EN ISO 25178-71:2017

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
11/22/2017 - PDF - English - NBN
Learn More

€58.00

ISO 14253-1:2017 (R2023)

Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment
10/31/2017 - - - ISO
Learn More

€148.00

BS EN ISO 25178-71:2017

Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
10/23/2017 - PDF - English - BSI
Learn More

€180.00

NF EN ISO 25178-71, E05-031-71 (10/2017)

Geometrical product specifications (GPS) - Surface texture : areal - Part 71 : software measurement standards - Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 71 : Étalons logiciels
10/1/2017 - Papier - French - AFNOR
Learn More

€73.00

DIN EN ISO 1660:2017-09

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017), German version EN ISO 1660:2017
9/1/2017 - PDF - German - DIN
Learn More

€126.26

DIN EN ISO 1660:2017-09

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
9/1/2017 - PDF - English - DIN
Learn More

€157.66

DIN EN ISO 1101:2017-09

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
9/1/2017 - PDF - English - DIN
Learn More

€292.52

DIN EN ISO 1101:2017-09

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017), German version EN ISO 1101:2017
9/1/2017 - PDF - German - DIN
Learn More

€234.02

NF EN ISO 25178-72, E05-031-72 (08/2017)

Geometrical product specifications (GPS) - Surface texture : Areal - Part 72 : XML file format x3p
8/1/2017 - Papier - French - AFNOR
Learn More

€86.50

DIN EN ISO 14405-3:2017-07

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016), German version EN ISO 14405-3:2017
7/1/2017 - PDF - German - DIN
Learn More

€99.35

DIN EN ISO 14405-3:2017-07

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
7/1/2017 - PDF - English - DIN
Learn More

€124.21

DIN EN ISO 14405-1:2017-07

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
7/1/2017 - PDF - English - DIN
Learn More

€177.38

DIN EN ISO 14405-1:2017-07

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016), German version EN ISO 14405-1:2016
7/1/2017 - PDF - German - DIN
Learn More

€141.96

UNE-EN ISO 14405-3:2017

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) (Endorsed by Asociación Española de Normalización in July of 2017.)
7/1/2017 - PDF - English - AENOR
Learn More

€69.00

17/30358444 DC:2017

BS EN ISO 14405-2 AMD1. Geometrical product specifications (GPS). Dimensional tolerancing Part 2. Dimensions other than linear sizes
6/16/2017 - PDF - English - BSI
Learn More

€24.00

DIN EN ISO 1938-2:2017-05

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
5/1/2017 - PDF - English - DIN
Learn More

€91.12

DIN EN ISO 1938-2:2017-05

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017), German version EN ISO 1938-2:2017
5/1/2017 - PDF - German - DIN
Learn More

€72.80

UNE-EN ISO 18391:2016

Geometrical product specifications (GPS) - Population specification (ISO 18391:2016) (Endorsed by Asociación Española de Normalización in May of 2017.)
5/1/2017 - PDF - English - AENOR
Learn More

€65.00

BS EN ISO 16610-30:2017

Geometrical product specifications (GPS). Filtration Robust profile filters: Basic concepts
4/30/2017 - PDF - English - BSI
Learn More

€250.00

DIN EN ISO 16610-28:2017-04

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016), German version EN ISO 16610-28:2016
4/1/2017 - PDF - German - DIN
Learn More

€85.79

DIN EN ISO 16610-30:2017-04

Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015), German version EN ISO 16610-30:2017
4/1/2017 - PDF - German - DIN
Learn More

€79.72

DIN EN ISO 16610-28:2017-04

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
4/1/2017 - PDF - English - DIN
Learn More

€107.48

DIN EN ISO 16610-30:2017-04

Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
4/1/2017 - PDF - English - DIN
Learn More

€99.44

NF EN ISO 1101, E04-552 (04/2017)

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
4/1/2017 - Papier - French - AFNOR
Learn More

€198.33

NF EN ISO 9013, A87-000 (04/2017)

Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances
4/1/2017 - Papier - French - AFNOR
Learn More

€99.00

NF EN ISO 16610-30, E05-040-30 (04/2017)

Geometrical product specifications (GPS) - Filtration - Part 30 : robust profile filters : basic concepts
4/1/2017 - Papier - French - AFNOR
Learn More

€75.50

NF EN ISO 1938-2, E02-200-2 (04/2017)

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : reference disk gauges
4/1/2017 - Papier - French - AFNOR
Learn More

€60.50

NF EN ISO 1660, E04-556 (04/2017)

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing - Spécification géométrique des produits (GPS)
4/1/2017 - Papier - French - AFNOR
Learn More

€119.00

UNE-EN ISO 1101:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
4/1/2017 - PDF - English - AENOR
Learn More

€168.00

UNE-EN ISO 1660:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
4/1/2017 - PDF - English - AENOR
Learn More

€87.00

NBN EN ISO 1101:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
3/22/2017 - PDF - French - NBN
Learn More

€205.00

NBN EN ISO 1101:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
3/22/2017 - PDF - German - NBN
Learn More

€205.00

NBN EN ISO 1101:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
3/22/2017 - PDF - English - NBN
Learn More

€205.00

NBN EN ISO 1938-2:2017

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/22/2017 - PDF - French - NBN
Learn More

€58.00

NBN EN ISO 1938-2:2017

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/22/2017 - PDF - English - NBN
Learn More

€58.00

NBN EN ISO 1660:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
3/22/2017 - PDF - French - NBN
Learn More

€163.00

NBN EN ISO 1660:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
3/22/2017 - PDF - German - NBN
Learn More

€163.00

NBN EN ISO 1660:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
3/22/2017 - PDF - English - NBN
Learn More

€163.00

DIN EN ISO 18391:2017-03

Geometrical product specifications (GPS) - Population specification (ISO 18391:2016), German version EN ISO 18391:2016
3/1/2017 - PDF - German - DIN
Learn More

€85.79

DIN EN ISO 16610-31:2017-03

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016), German version EN ISO 16610-31:2016
3/1/2017 - PDF - German - DIN
Learn More

€72.80

DIN EN ISO 18391:2017-03

Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
3/1/2017 - PDF - English - DIN
Learn More

€107.48

DIN EN ISO 16610-31:2017-03

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
3/1/2017 - PDF - English - DIN
Learn More

€91.12

DIN 7163:2017-03

Geometrical product specifications (GPS) - Working gauges for external dimensions with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 and nominal dimensions of 1 mm to 500 mm and associated acceptance gauges - Gauge dimensions and tolerances
3/1/2017 - PDF - German - DIN
Learn More

€120.84

DIN 7164:2017-03

Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and tolerances for gauges
3/1/2017 - PDF - German - DIN
Learn More

€148.04

NF EN ISO 14405-3, E04-563-3 (03/2017)

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3 : angular sizes - Spécification géométrique des produits (GPS)
3/1/2017 - Papier - French - AFNOR
Learn More

€86.50

NF EN ISO 16610-28, E05-040-28 (03/2017)

Geometrical product specifications (GPS) - Filtration - Part 28 : profile filters : end effects
3/1/2017 - Papier - French - AFNOR
Learn More

€75.67

UNE-EN ISO 17450-3:2017

Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
3/1/2017 - - - AENOR
Learn More

From: €71.00

BS EN ISO 9013:2017

Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
2/28/2017 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 1938-2:2017

Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges
2/28/2017 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 1101:2017

Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
2/28/2017 - PDF - English - BSI
Learn More

€377.00

NBN EN ISO 14405-3:2017

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
2/23/2017 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 14405-3:2017

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
2/23/2017 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 14405-3:2017

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
2/23/2017 - PDF - English - NBN
Learn More

€121.00

DIN 863-1:2017-02

Geometrical product specifications (GPS) - Micrometers - Part 1: Micrometers for external measurements, maximum permissible errors
2/1/2017 - PDF - English - DIN
Learn More

€49.16

DIN 2270:2017-02

Geometrical product specifications (GPS) - Dial test indicators (lever type) - Maximum permissible errors.
2/1/2017 - PDF - German - DIN
Learn More

€32.34

BS EN ISO 16610-28:2016

Geometrical product specifications (GPS). Filtration Profile filters: End effects
1/31/2017 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 14405-3:2017

Geometrical product specifications (GPS). Dimensional tolerancing Angular sizes
1/31/2017 - PDF - English - BSI
Learn More

€293.00

NBN EN ISO 16610-28:2017

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
1/27/2017 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 16610-28:2017

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
1/27/2017 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 16610-28:2017

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
1/27/2017 - PDF - English - NBN
Learn More

€121.00

BS EN ISO 16610-31:2016

Geometrical product specifications (GPS). Filtration Robust profile filters: Gaussian regression filters
12/31/2016 - PDF - English - BSI
Learn More

€250.00

UNE-EN ISO 3040:2016

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
12/14/2016 - - - AENOR
Learn More

From: €74.00

DIN EN ISO 25178-606:2016-12

Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015), German version EN ISO 25178-606:2015
12/1/2016 - PDF - German - DIN
Learn More

€110.00

DIN EN ISO 16610-40:2016-12

Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015), German version EN ISO 16610-40:2015
12/1/2016 - PDF - German - DIN
Learn More

€85.79

DIN EN ISO 14253-5:2016-12

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015), German version EN ISO 14253-5:2015
12/1/2016 - PDF - German - DIN
Learn More

€92.62

DIN EN ISO 25178-1:2016-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016), German version EN ISO 25178-1:2016
12/1/2016 - PDF - German - DIN
Learn More

€99.35

DIN EN ISO 17450-3:2016-12

Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016), German version EN ISO 17450-3:2016
12/1/2016 - PDF - German - DIN
Learn More

€92.62

DIN EN ISO 3040:2016-12

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016), German version EN ISO 3040:2016
12/1/2016 - PDF - German - DIN
Learn More

€99.35

DIN 2271:2016-12

Geometrical product specifications (GPS) - Pneumatic length measurement - Characteristics of instruments, requirements, testing
12/1/2016 - PDF - German - DIN
Learn More

€99.35

DIN EN ISO 25178-606:2016-12

Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015)
12/1/2016 - PDF - English - DIN
Learn More

€137.85

DIN EN ISO 14253-5:2016-12

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
12/1/2016 - PDF - English - DIN
Learn More

€115.98

DIN EN ISO 25178-1:2016-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
12/1/2016 - PDF - English - DIN
Learn More

€124.21

DIN EN ISO 17450-3:2016-12

Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
12/1/2016 - PDF - English - DIN
Learn More

€115.98

DIN EN ISO 3040:2016-12

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
12/1/2016 - PDF - English - DIN
Learn More

€124.21

DIN EN ISO 16610-40:2016-12

Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015)
12/1/2016 - PDF - English - DIN
Learn More

€107.48

NF EN ISO 10360-12, E11-150-12 (12/2016)

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12 : articulated arm coordinate measurement machines (CMM) - Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 12 : MMT à bras articulés
12/1/2016 - Papier - French - AFNOR
Learn More

€108.00

Geometrical Product Specification (GPS)

For which industries :

Find our selection :