ASTM F1891-19

ASTM F1891-19

Standard Specification for Arc and Flame Resistant Rainwear

Availability: In stock

€51.00

Details

1.1 ,This specification establishes applicable test methods, minimum physical and thermal performance criteria, a suggested sizing guide, and suggested purchasing information for rainwear for use by workers who may be exposed to thermal hazards of momentary electric arcs and open flames.

1.1.1 ,This specification does not apply to the electrical contact hazards or electric shock hazards involved with electric arcs.

1.1.2 ,This specification does not apply to flash fire hazards such as industrial hydrocarbon flash fires or other petrochemical flash fire hazards.

1.2 ,The objective of this specification is to prescribe fit, function and performance criteria for rainwear that meets a minimum level of thermal and physical performance when exposed to a laboratory–,simulated electric arc or flame exposure.

1.3 ,This specification is not intended to serve as a detailed manufacturing or purchasing specification, but can be referenced in purchase contracts to ensure that minimum performance requirements are met.

1.4 ,Controlled laboratory tests used to determine compliance with the performance requirements of this specification shall not be deemed as establishing performance levels for all situations to which wearers of this protective clothing may be exposed.

1.5 ,The in-service care and use of this rainwear is beyond the scope of this specification.

1.6 ,The values stated in inch-pound units are to be regarded as the standard. The SI units shown in parentheses are for information only.

1.7 ,The following safety hazards caveat pertains only to Sections 7 and 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


Rationale:

This specification establishes applicable test methods, minimum physical and thermal performance criteria, a suggested sizing guide, and suggested purchasing information for rainwear for use by workers who may be exposed to thermal hazards of momentary electric arcs and open flames. It does not however apply to electrical contact hazards or electric shock hazards involved with electric arcs nor to flash fire hazards such as industrial hydrocarbon flash fires or other petrochemical flash fire hazards. The rainwear shall be manufactured of materials and constructed using seams that meet the requirements for leak resistance and shall meet the physical requirements of this specification initially as manufactured and after five cleanings. The specimen shall be subjected to tests to determine conformance to the following requirements: flame resistance, tear strength resistance, waterproofness, electric arc resistance, material average weight, arc rating, arc thermal performance value, breakopen threshold energy, heat attenuation factor, and melting and dripping. The material response characteristics for rainwear material, including afterflame time, breakopen, charring, dripping, electric arc ignition, embrittlement, melting, and shrinkage, shall be reported for two typical exposures at least equal to the arc rating and also for two typical exposures at least two times the arc rating.

Additional Info

Author American Society for Testing and Materials (ASTM International)
Committee F18.65 - Committee F18 on Electrical Protective Equipment for Workers
Published by ASTM
Document type Standard
Theme ,Protective clothing,Clothes
ICS 13.340.10 : Protective clothing
61.020 : Clothes
Number of pages 10
Replace ASTM F1891-12
Set ASTM Volume 10.03 - Multi-User - Single-Site Online
Document history ,,,,,
Keyword F1891

You may also be interested in the following product(s)