ASTM D6363-20

ASTM D6363-20

Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method

Availability: In stock

€51.00

Details

1.1 ,This test method covers the determination of hydroperoxides, which include hydrogen peroxide (H2O2) and combined organic peroxides, in samples of atmospheric water by the method of horseradish peroxidase derivatization and fluorescence analysis of the derived dimer.2,3

1.2 ,The range of applicable hydrogen peroxide concentrations was determined to be 0.6–,176.0 ×, 10−,6 M from independent laboratory tests of the test method.

1.3 ,The primary use of the test method is for hydrogen peroxide, but it may also be used to quantitate organic hydroperoxides. Determinations of organic hydroperoxide concentration levels up to 30 ×, 10−,6 M may be adequately obtained by calibration with hydrogen peroxide.2,3 While organic hydroperoxides have not been detected at significant concentration levels in rain or cloud water, their presence may be tested by operation of the test method with the addition of catalase for destruction of H2O2.3

1.4 ,Because of the instability of hydroperoxides in atmospheric water samples, proper sample collection, at-collection derivatization, and stringent quality control are essential aspects of the analytical process.

1.5 ,The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 ,This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7 ,This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


Significance and Use:

5.1 ,Hydrogen peroxide (formed photochemically in the atmosphere) is a primary oxidizer of dissolved sulfur dioxide in atmospheric water. Detection of H2O2 in atmospheric water is useful for inferring gas-phase H2O2 concentrations and for assessing the relative importance of various acidifying mechanisms under specific atmospheric conditions.

5.2 ,Hydroperoxides in samples to be analyzed are unstable in water and can decay rapidly due to bacterial action or chemical reaction with other constituents. The test method includes procedures for sample derivatization and methods for estimating and correcting for hydroperoxide decay.

Additional Info

Author American Society for Testing and Materials (ASTM International)
Committee D22.03 - Committee D22 on Air Quality
Published by ASTM
Document type Standard
Theme ,Examination of water for chemical substances
ICS 13.060.50 : Examination of water for chemical substances
Number of pages 6
Replace ASTM D6363-98(2013)
Set ASTM Volume 11.07 - Multi-User - Single-Site Online
Document history ,,,
Keyword D6363
Order form

You may also be interested in the following product(s)