Appelez le +33 (1) 40 02 03 05
Type de carte de crédit

WRC

79 article(s)

Par ordre croissant
par page

Liste  Grille 

  • WRC 574

    Compendium of High Temperature Hydrogen Attack (HTHA) Damage in C-1/2 Mo Steels
    01/01/2019 - PDF - Anglais - WRC
    En savoir plus
    150,00 €

  • WRC 575

    Revisiting the Bree Diagram: Derivation with Temperature Dependent Properties
    01/01/2019 - PDF - Anglais - WRC
    En savoir plus
    150,00 €

  • WRC 554

    The Valid Stress Range for the MPC Omega Model in API 579-1/ASME FFS-1 2016 and the Creep Rupture Model in WRC 541
    01/01/2019 - PDF - Anglais - WRC
    En savoir plus
    175,00 €

  • WRC 570

    Fundamental Studies of Hydrogen Attack in C-0.5Mo Steel and Weldments
    01/01/2018 - PDF - Anglais - WRC
    En savoir plus
    225,00 €

  • WRC 572

    Characterization of Crack Surface Morphology of Reheat and Hydrogen Assisted Cracks in Submerged Arc Weld Deposits of 2-1/4Cr-1Mo-V (22V) Steels
    01/01/2018 - PDF - Anglais - WRC
    En savoir plus
    200,00 €

  • WRC 573

    Effects of Heat Treatment and Chemical Composition on High Temperature Hydrogen Attack Resistance of C-1/2 Mo Steels
    01/01/2018 - PDF - Anglais - WRC
    En savoir plus
    150,00 €

  • WRC 562

    Recommendations for Establishing the Minimum Pressurization Temperature (MPT) for Equipment
    01/01/2017 - PDF - Anglais - WRC
    En savoir plus
    225,00 €

  • WRC 571

    Incorporation of Structural Reliability Methods into Fitness for Service Procedures
    01/01/2017 - PDF - Anglais - WRC
    En savoir plus
    220,00 €

  • WRC 550

    Standardization of Fatigue Methods for Use in API 579-1/ASME FFS-1
    01/01/2016 - PDF - Anglais - WRC
    En savoir plus
    225,00 €

  • WRC 552

    Calculation of Weld Residual Stresses and the Effects of Local Post-Weld Heat Treatment
    01/01/2016 - PDF - Anglais - WRC
    En savoir plus
    200,00 €

  • WRC 553

    Weld Residual Stress Estimate for FFS Assessment and Evaluation of Local PWHT Procedures
    01/01/2016 - PDF - Anglais - WRC
    En savoir plus
    200,00 €

  • WRC 557

    Buckling and Post Buckling of Plate Girders in Bending
    01/01/2016 - PDF - Anglais - WRC
    En savoir plus
    50,00 €

  • WRC 566

    Guidelines for Repair Welding of Pressure Equipment in Refineries and Chemical Plants - Second Edition
    01/01/2016 - PDF - Anglais - WRC
    En savoir plus
    150,00 €

  • WRC 568

    Current Concepts for Life Assessment of Pressure Vessels and Piping
    01/01/2016 - PDF - Anglais - WRC
    En savoir plus
    295,00 €

  • WRC 539

    Fatigue, Tensile, and Relaxation Behavior of Stainless Steels
    01/01/2015 - PDF - Anglais - WRC
    En savoir plus
    250,00 €

  • WRC 541

    Evaluation of Material Strength Data for Use in API Std 530 - 2nd Edition
    01/01/2015 - PDF - Anglais - WRC
    En savoir plus
    325,00 €

  • WRC 555

    A Comparison of Criteria for Acceptance of Risk
    01/01/2015 - PDF - Anglais - WRC
    En savoir plus
    50,00 €

  • WRC 558

    Recognition of UNS 34751 (347LN, aka 347AP) Alloy in API 579-1/ASME FFS-1 and API Std 530
    01/01/2015 - PDF - Anglais - WRC
    En savoir plus
    75,00 €

  • WRC 561

    Finite Element Analysis of Stress Rupture in Pressure Vessels Exposed to Accidental Fire Loading
    01/01/2015 - PDF - Anglais - WRC
    En savoir plus
    75,00 €

  • WRC 536

    Service-Like Thermo-Mechanical Fatigue Characteristics of 1CrMoV Rotor Steel
    01/01/2014 - PDF - Anglais - WRC
    En savoir plus
    150,00 €

  • WRC 538

    Determination of Pressure Boundary Joint Assembly Bolt Loads
    01/01/2014 - PDF - Anglais - WRC
    En savoir plus
    75,00 €

  • WRC 540

    A Study Concerning the Heat Affected Zone Toughness of Microalloyed Steels
    01/01/2014 - PDF - Anglais - WRC
    En savoir plus
    200,00 €

  • WRC 542

    Stud and Nut Structural Tension Capacity Matching
    01/01/2014 - PDF - Anglais - WRC
    En savoir plus
    145,00 €

  • WRC 543

    Final Report - Laser Repair of Directionally Solidified Superalloys
    01/01/2014 - PDF - Anglais - WRC
    En savoir plus
    145,00 €

  • WRC 544

    Material Specific Load Combination Factors for Option 2 FAD Curves
    01/01/2014 - PDF - Anglais - WRC
    En savoir plus
    225,00 €

  • WRC 545

    Improvements in the Thinning Damage Factor Calculation Planned for the 3rd Edition of API RP 581
    01/01/2014 - PDF - Anglais - WRC
    En savoir plus
    250,00 €

  • WRC 547

    Fitness-For-Service Evaluation Procedures for Operating Pressure Vessels, Tanks, and Piping in Refinery and Chemical Service
    01/01/2014 - PDF - Anglais - WRC
    En savoir plus
    395,00 €

  • WRC 548

    C-½ Mo Steel Toughness Properties for Hydrogen Service
    01/01/2014 - PDF - Anglais - WRC
    En savoir plus
    295,00 €

  • WRC 523

    The Master S-N Curve Method: An Implementation for Fatigue Evaluation of Welded Components in the ASME B&PV Code, Section VIII, Division 2 and API 579-1/ASME FFS-1
    01/01/2010 - PDF - Anglais - WRC
    En savoir plus
    225,00 €

  • WRC 528

    Development Of Material Fracture Toughness Rules For ASME B&PV Code Section VIII, Division 2
    01/01/2010 - PDF - Anglais - WRC
    En savoir plus
    225,00 €

  • WRC 529

    Development of Design Rules for Nozzles in Pressure Vessels for the ASME B&PV Code, Section VIII, Division 2
    01/01/2010 - PDF - Anglais - WRC
    En savoir plus
    225,00 €

  • WRC 533

    The Role of Welded Joint Vulnerability and Various Damage Mechanisms Active in Process and Petrochemical Plants: Reliability Analysis with Risk Based Inspection (RBI) Approach
    01/01/2010 - PDF - Anglais - WRC
    En savoir plus
    187,20 €

  • WRC 537

    Precision Equations and Enhanced Diagrams For Local Stresses In Spherical and Cylindrical Shells Due To External Loadings For Implementation of WRC Bulletin 107
    01/01/2010 - PDF - Anglais - WRC
    En savoir plus
    325,00 €

  • WRC 520

    Recommendations for Fatigue Design of Welded Joints and Components
    01/01/2009 - PDF - Anglais - WRC
    En savoir plus
    192,00 €

  • WRC 521

    Development of Design Rules for Conical Transitions in Pressure Vessels for the ASME B&PV Code, Section VIII, Division 2
    01/01/2009 - PDF - Anglais - WRC
    En savoir plus
    225,00 €

  • WRC 524

    Modern Vanadium Steels for High Temperature Petroleum Reactors
    01/01/2009 - PDF - Anglais - WRC
    En savoir plus
    168,00 €

  • WRC 525

    Fabrication and Repair of Low Alloy Steel Pressure Equipment
    01/01/2009 - PDF - Anglais - WRC
    En savoir plus
    126,00 €

  • WRC 526

    Performance of Steels in Hydrogen Charging Environments
    01/01/2009 - PDF - Anglais - WRC
    En savoir plus
    138,00 €

  • WRC 527

    Practical Aspects Of Hydrogen Attack
    01/01/2009 - PDF - Anglais - WRC
    En savoir plus
    156,00 €

  • WRC 530

    Test Methods for Hydrogen Induced Cracking
    01/01/2009 - PDF - Anglais - WRC
    En savoir plus
    156,00 €

  • WRC 532

    Metallurgical Studies of Steels for Sour Service Environments
    01/01/2009 - PDF - Anglais - WRC
    En savoir plus
    187,20 €

  • WRC 534

    Studies of Cladding and Overlay for Pressure Vessel Service
    01/01/2009 - PDF - Anglais - WRC
    En savoir plus
    126,00 €

  • WRC 535

    Toughness, Fracture and Fitness for Hydrogen Service
    01/01/2009 - PDF - Anglais - WRC
    En savoir plus
    175,00 €

  • WRC 518

    Mechanical Properties of Cast ?'-Strengthened Nickel Base Superalloys
    01/01/2007 - PDF - Anglais - WRC
    En savoir plus
    168,00 €

  • WRC 531

    Development of Fitness-For-Service Rules for the Assessment of Hydrogen Blisters, HIC and SOHIC
    01/01/2007 - PDF - Anglais - WRC
    En savoir plus
    174,00 €

  • WRC 519

    Stainless Steel Weld Metal – Prediction of Ferrite Content: An Update of WRC Bulletins 318 and 342
    01/01/2007 - PDF - Anglais - WRC
    En savoir plus
    162,00 €

  • WRC 508

    Optimized/Harmonized Room Temperature Leakage Test Procedure for Generation of ASME & CEN Code Gasket Factors – Analytical Phase
    01/01/2006 - PDF - Anglais - WRC
    En savoir plus
    150,00 €

  • WRC Bulletin No. 509:2006

    Weldability and Hot Ductility Behavior of Nuclear Grade Austenitic Stainless Steels
    01/01/2006 - PDF - Anglais - WRC
    En savoir plus
    330,00 €

  • WRC 510

    Analysis of the Effects of Temperature on Bolted Joints
    01/01/2006 - PDF - Anglais - WRC
    En savoir plus
    114,00 €

  • WRC 511

    High Performance Cast ?' - Strengthened Nickel Based Superalloys - An Interpretive Report
    01/01/2006 - PDF - Anglais - WRC
    En savoir plus
    156,00 €

  • WRC 512

    Creep and Creep/Fatigue Crack Growth Modeling and Testing Methods Relevant to Life Assessment of Cracked Components
    01/01/2006 - PDF - Anglais - WRC
    En savoir plus
    186,00 €

  • WRC 513

    Effect of the Misalignment of Piping Systems and Non Parallel Flange Faces on the Tightness of DN200 PN40 Flanged Joints
    01/01/2006 - PDF - Anglais - WRC
    En savoir plus
    60,00 €

  • WRC 514

    Improved Flange Design Method for the ASME VIII, Div. 2 Rewrite Project: Status of Present Design Methods
    01/01/2006 - PDF - Anglais - WRC
    En savoir plus
    114,00 €

  • WRC 515

    Determination of the Gasket Effective Width for the ASME Proposed Flange Design Rules
    01/01/2006 - PDF - Anglais - WRC
    En savoir plus
    84,00 €

  • WRC 516

    Part 1: 3D-Finite Modeling of Bolted Flanged Joints and Development of a Transducer for Measuring Gasket Contact Stress: 3D Finite Element Modeling of Bolted Flanged Joints Subjected to External Bending Loads
    Part 2: 3D-Finite Modeling of Bolted Flanged Joints and Development of a Transducer for Measuring Gasket Contact Stress: Development of a Transducers for Measuring Gasket Contact Stress in Bolted Flanged Joints
    01/01/2006 - PDF - Anglais - WRC
    En savoir plus
    120,00 €

  • WRC 517

    Examination of Mechanical Properties And Corrosion of High Temperature Alloys after Long Term Service under Advanced Power Plant Boiler Conditions - The Eddystone Studies
    01/01/2006 - PDF - Anglais - WRC
    En savoir plus
    204,00 €

  • WRC Bulletin No. 505 (2005)

    An Overview and Validation of the Fitness-For-Service Assessment Procedures for Local Thin Areas in API 579
    01/09/2005 - PDF - Anglais - WRC
    En savoir plus
    258,00 €

  • WRC Bulletin No. 502 (2005)

    Effect of Microfissures on Corrosion Performance and Mechanical Properties of Austenitic Stainless Steel Weld Metals
    01/06/2005 - PDF - Anglais - WRC
    En savoir plus
    126,00 €

  • WRC Bulletin No. 488 (2004)

    Damage Mechanisms Affecting Fixed Equipment in the Pulp and Paper Industry
    01/01/2004 - PDF - Anglais - WRC
    En savoir plus
    186,00 €

  • WRC Bulletin No. 476:2002

    Recommendations for Determining Residual Stresses in Fitness-For-Service Assessment
    01/11/2002 - PDF - Anglais - WRC
    En savoir plus
    138,00 €

  • WRC Bulletin No. 470 (2002)

    Recommendations for Design of Vessels for Elevated Temperature Service
    01/04/2002 - PDF - Anglais - WRC
    En savoir plus
    90,00 €

  • WRC Bulletin No. 469:2002


    01/02/2002 - PDF - Anglais - WRC
    En savoir plus
    84,00 €

  • WRC Bulletin No. 465:2001

    Technologies For The Evaluation Of Non-Crack-Like Flaws In Pressurized Components -- Erosion/Corrosion, Pitting, Blisters, Shell Out-Of-Roundness, Weld Misalignment, Bulges And Dents
    01/09/2001 - PDF - Anglais - WRC
    En savoir plus
    246,00 €

  • WRC Bulletin No. 460 (2001)

    High temperature cracking and properties of stainless steel flux-cored welds and effects of bismuth
    01/04/2001 - PDF - Anglais - WRC
    En savoir plus
    90,00 €

  • WRC Bulletin No. 452 (2000)

    Recommended Practices For Local Heating Of Welds In Pressure Vessels
    01/06/2000 - PDF - Anglais - WRC
    En savoir plus
    114,00 €

  • WRC Bulletin No. 438:1999

    Intermetallic Phase Precipitation In Duplex Stainless Steels And Weld Metals: Metallurgy, Influence On Properties, Welding And Testing Aspects
    01/01/1999 - PDF - Anglais - WRC
    En savoir plus
    98,40 €

  • WRC Bulletin No. 432:1998

    Fatigue Strength Reduction and Stress Concentration Factors for Welds in Pressure Vessels and Piping: Two Reports
    01/06/1998 - PDF - Anglais - WRC
    En savoir plus
    114,00 €

  • WRC Bulletin No. 421:1997

    Welding type 347 stainless steel-an interpretive report
    01/05/1997 - PDF - Anglais - WRC
    En savoir plus
    150,00 €

  • WRC Bulletin No. 369:1992

    Nitrogen In Arc Welding - A Review
    01/01/1992 - PDF - Anglais - WRC
    En savoir plus
    138,00 €

  • WRC Bulletin No. 368 (1991)

    Stress in Intersecting Cylinders subjected to pressure
    01/11/1991 - PDF - Anglais - WRC
    En savoir plus
    76,80 €

  • WRC Bulletin No. 350:1990

    Design Criteria for Dissimilar Metal Welds
    01/01/1990 - PDF - Anglais - WRC
    En savoir plus
    76,80 €

  • WRC Bulletin No. 342:1989

    Stainless Steel Weld Metal: Prediction Of Ferrite Content
    01/04/1989 - PDF - Anglais - WRC
    En savoir plus
    76,80 €

  • WRC Bulletin No. 330 (1988)

    The Fracture Behavior of A588 Grade A and A572 Grade 50 Weldments ; Effects of Long-Time Postweld Heat Treatment on the Properties of Constructional-Steel Weldments
    01/01/1988 - PDF - Anglais - WRC
    En savoir plus
    54,00 €

  • WRC Bulletin No. 329 (1987)

    Accuracy of Stress Intensification Factors for Branch Connections
    01/12/1987 - PDF - Anglais - WRC
    En savoir plus
    54,00 €

  • WRC Bulletin No. 302:1985

    Part 1: Postweld Heat Treatment of Pressure Vessels
    01/02/1985 - PDF - Anglais - WRC
    En savoir plus
    72,00 €

  • WRC 297:1984 (R1987)

    Local Stresses In Cylindrical Shells Due To External Loadings On Nozzles-Supplement to WRC Bulletin No. 107 (Revision I)
    01/09/1984 - PDF - Anglais - WRC
    En savoir plus
    118,08 €

  • WRC Bulletin No. 231 (1977)

    Factors Affecting Weld Metal Properties in Carbon and Low Alloy Pressure Vessel Steels
    01/10/1977 - PDF - Anglais - WRC
    En savoir plus
    76,80 €

  • WRC Bulletin No. 198:1974

    Part 1: Secondary Stress Indices for Integral Structural Attachments to Striaght Pipe
    Part 2: Stress Indices at Lug Supports on Piping Systems
    01/09/1974 - PDF - Anglais - WRC
    En savoir plus
    87,60 €

  • WRC 108

    Experimental Determination of Stress Distributions in Thin-Walled Cylindrical and Spherical Pressure Vessels with Circular Nozzles; A Review and Evaluation of Computer Programs for the Analysis of St
    01/09/1965 - PDF - Anglais - WRC
    En savoir plus
    72,00 €

79 article(s)

Par ordre croissant
par page

Liste  Grille