American Welding Society : les nouveautés 2011/2012

AWS

As a leader in welding education and technology development, AWS promotes best practices and works to advance the science and application of welding and allied processes such as joining, brazing, soldering, cutting, and thermal spray.

coming soon

2012

A5.9/A5.9M:2012 Specification for Bare Stainless Steel Welding
Electrodes and Rods .
This specification prescribes the requirements for classification of solid and composite stainless steel electrodes (both as wire and strip) for gas metal arc welding, submerged arc welding, and other fusion welding processes. It also includes wire and rods for use in gas tungsten arc welding.
Classification is based on chemical composition of the filler metal. Additional requirements are included for manufacture, sizes, lengths, and packaging. A guide is appended to the specification as a source of information concerning the classification system employed and the intended use of the stainless steel filler metal.
This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other. A5.8M/A5.8 Specification for Filler Metals for Brazing and
Braze Welding .

A5.22/A5.22M Specification for Stainless Steel Flux Cored
and Metal Cored Welding Electrodes and Rods
A5.23/A5.23M Specification for Low-Alloy Steel Electrodes and
Fluxes for Submerged Arc Welding

AWS A5.36/A5.36M:2012 Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc Welding
This specification combines the two specifications previously issued by the American Welding Society for the classification of carbon and low-alloy steel flux cored electrodes (AWS A5.20/A5.20M, Specification for Carbon Steel Electrodes for Flux Cored Arc Welding, and AWS A5.29/A5.29M, Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding).

In addition, this specification includes provisions for the classification of carbon and low-alloy steel metal cored electrodes. Heretofore, carbon steel metal cored electrodes were classified under

AWS A2.4:2012 STANDARD SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATION
Establishes a method of specifying certain welding, brazing, and nondestructive examination information by means of symbols.

Contains detailed information and examples for the construction and interpretation of these symbols. This system provides a means of specifying welding or brazing operations and nondestructive examination, as well as the examination method, frequency, and extent.
150 pages, 6 Tables, 56 Figures.
AWS A5.36/A5.36M:2012 Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc Welding
This specification combines the two specifications previously issued by the American Welding Society for the classification of carbon and low-alloy steel flux cored electrodes (AWS A5.20/A5.20M, Specification for Carbon Steel Electrodes for Flux Cored Arc Welding, and AWS A5.29/A5.29M, Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding).

In addition, this specification includes provisions for the classification of carbon and low-alloy steel metal cored electrodes. Heretofore, carbon steel metal cored electrodes were classified under
B5.5—NEW! Specification for the Qualification of Welding Educators
BUNDLE B :2012
Save a bundle when you buy an AWS structural bundle. Get 15% OFF the individual standards- purchase prices.

Contains:
AWS D1.1/D1.1M:2010, and the most recent editions of:
D1.2/D1.2M
D1.3/D1.3M
D1.6/D1.6M
D1.4/D1.4M
AASHTO/AWS D1.5M/D1.5

C3.7M/C3.7—NEW! Specification for Aluminum Brazing
C3.8M/C3.8—NEW! Specification for the Pulse-Echo Ultrasonic
Examination of Brazed Joints .
C3.11M/C3.11—NEW! Specification for Torch Soldering
2011
A5.14/A5.14M:2011 Specification for Nickel and Nickel-Alloy Bare
Welding Electrodes and Rods .

A5.21/A5.21M:2011 Specification for Bare Electrodes and Rods for Surfacing (40 pages)

Resistance Welding Pocket Handbook Portable basic information and do’s and don’ts. Common defects and their causes. Sample weld schedules. 33/4" by 6, spiral- bound, 48 pages, 12 tables, 16 figures (2011).
D10.17M:2011, Guide for Welding Tubular Steel Vehicle Structures
QC20:2011 Specification for AWS Certification of Resistance Welding Technicians

ANSI/AWS A5.32M/A5.32:2011 Welding Consumables - Gases and Gas Mixtures for Fusion Welding and Allied Processes
ANSI/AWS RWPH:2011 Resistance Welding Pocket Handbook
ANSI/AWS D1.4/D1.4M:2011 Structural Welding Code - Reinforced Steel
2010

ANSI/AWS A5.21/A5.21M:2011 Specification for Bare Electrodes and Rods for Surfacing

ANSI/AWS D3.6M:2010 Underwater Welding Code
ANSI/AWS D10.14M/D10.14:2010 Guide for Multipass Orbital Machine Pipe Groove Welding Revised

Août 2010
ANSI/AWS D1.5M/D1.5:2010 Bridge Welding Code (Joint Publication with AASHTO)
Juillet 2010
ANSI/AWS F2.3M:2011 Specification for Use and Performance of Transparent Welding Curtains and Screens
ANSI/AWS B2.1-22-015:2011 Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Aluminum (M/P/S-22 to M/P/S-22), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
Juin 2010

ANSI/AWS C7.2M:2010 Recommended Practices for Laser Beam Welding, Cutting, and Allied Processes
Mai 2010

ANSI/AWS D14.3/D14.3M:2010 Specification for Welding Earthmoving, Construction and Agricultural Equipment
Mars 2010

ANSI/AWS A5.13:2010 Specification for Surfacing Electrodes for Shielded Metal Arc Welding
ANSI/AWS D1.1/D1.1M:2010 (2nd Edition) STRUCTURAL WELDING CODE-STEEL NEW 5 YEAR REVISION CYCLE (2010)
Février 2010

ANSI/AWS D3.9:2010 Specification for Classification of Weld-Through Paint Primers

Identifiez-vous

American Welding Society : les nouveautés 2011/2012

AWS