Call +33 (1) 40 02 03 05

83.140 : Rubber and plastics products

Items 1 to 200 of 2887 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  • ASTM D4803-18

    Standard Test Method for Predicting Heat Buildup in PVC Building Products
    10/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D4803-18 + Redline

    Standard Test Method for Predicting Heat Buildup in PVC Building Products
    10/1/2018 - PDF - English - ASTM
    Learn More
    €49.00

  • DIN EN 13206/A1:2018-10

    Plastics - Thermoplastic covering films for use in agriculture and horticulture; German and English version EN 13206:2017/prA1:2018
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • PR NF S93-102-3/A1, PR NF EN ISO 8871-3/A1 (09/2018)

    Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 3 : determination of released-particle count - Amendment 1
    9/25/2018 - Paper - English, French - AFNOR
    Learn More
    €54.95

  • PR NF T54-114, PR NF EN ISO 11502 (09/2018)

    Plastics - Film and sheeting - Determination of blocking resistance
    9/11/2018 - Paper - English, French - AFNOR
    Learn More
    €68.76

  • PR NF T54-426, PR NF EN ISO 15527 (09/2018)

    Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
    9/11/2018 - Paper - English, French - AFNOR
    Learn More
    €78.60

  • DIN EN ISO 11502:2018-09

    Plastics - Film and sheeting - Determination of blocking resistance (ISO/FDIS 11502:2018); German and English version prEN ISO 11502:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €61.70

  • DIN EN ISO 527-3:2018-09

    Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO/FDIS 527-3:2018); German and English version prEN ISO 527-3:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €61.70

  • ISO/DIS 17880:2018

    Cellular plastics - Self-supporting metal faced sandwich panels - Cellular plastics
    9/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • BS ISO 20457:2018

    Plastics moulded parts. Tolerances and acceptance conditions
    8/30/2018 - Paper - English - BSI
    Learn More
    €225.72

  • BS ISO 48-6:2018

    Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by IRHD method
    8/22/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS ISO 48-7:2018

    Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by Shore-type durometer method
    8/22/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS ISO 48-8:2018

    Rubber, vulcanized or thermoplastic. Determination of hardness. Apparent hardness of rubber-covered rollers by Pusey and Jones method
    8/22/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS ISO 8789:2018

    Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification
    8/10/2018 - Paper - English - BSI
    Learn More
    €139.08

  • PR NF T54-400-1, PR NF EN ISO 11833-1 (08/2018)

    Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1 : sheets of thickness not less than 1 mm
    8/8/2018 - Paper - English, French - AFNOR
    Learn More
    €86.46

  • PR NF T54-402, PR NF EN ISO 11963 (08/2018)

    Plastics - Polycarbonate sheets - Types, dimensions and characteristics
    8/8/2018 - Paper - English, French - AFNOR
    Learn More
    €72.38

  • ASTM D882-18

    Standard Test Method for Tensile Properties of Thin Plastic Sheeting
    8/1/2018 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM D882-18 + Redline

    Standard Test Method for Tensile Properties of Thin Plastic Sheeting
    8/1/2018 - PDF - English - ASTM
    Learn More
    €55.00

  • DIN EN ISO 15527:2018-08

    Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO/FDIS 15527:2018); German and English version prEN ISO 15527:2018
    8/1/2018 - PDF - English, German - DIN
    Learn More
    €82.60

  • ASTM D5477-18

    Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
    8/1/2018 - PDF - English - ASTM
    Learn More
    €36.00

  • ASTM D5477-18 + Redline

    Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
    8/1/2018 - PDF - English - ASTM
    Learn More
    €43.00

  • ISO 8789:2018

    Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification
    8/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • DIN EN 17271:2018-08

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils; German and English version prEN 17271:2018
    8/1/2018 - PDF - English, German - DIN
    Learn More
    €68.30

  • ASTM D7292-18

    Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
    8/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D7292-18 + Redline

    Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
    8/1/2018 - PDF - English - ASTM
    Learn More
    €49.00

  • ASTM D4020-18

    Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
    8/1/2018 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM D4020-18 + Redline

    Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
    8/1/2018 - PDF - English - ASTM
    Learn More
    €55.00

  • ASTM D4726-18

    Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
    8/1/2018 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM D4726-18 + Redline

    Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
    8/1/2018 - PDF - English - ASTM
    Learn More
    €55.00

  • ISO 48-6:2018

    Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6: Apparent hardness of rubber-covered rollers by IRHD method
    8/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 48-6:2018

    Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6: Apparent hardness of rubber-covered rollers by IRHD method
    8/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 48-7:2018

    Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
    8/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 48-7:2018

    Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
    8/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 48-8:2018

    Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
    8/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 48-8:2018

    Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
    8/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • BS EN ISO 3949:2018

    Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification
    7/31/2018 - Paper - English - BSI
    Learn More
    €139.08

  • PR NF T47-502, PR NF ISO 3601-3 (07/2018)

    Fluid power systems - O-rings - Part 3: Quality acceptance criteria
    7/31/2018 - Paper - French - AFNOR
    Learn More
    €59.88

  • PR NF T54-981 (07/2018)

    Plastics - Plastic dispatching films for the manufacturing of covers intended to be used in automatic processing in mail network - Specifications for manufacturing and recommendations for use
    7/15/2018 - Paper - French - AFNOR
    Learn More
    €52.20

  • PR NF T57-950-1 (07/2018)

    Sandwich panels for industrial road transport bodywork and fixed cells - Part 1 : acceptability criteria for sandwich panels with skins made from thermoset matrix fibre reinforced composite
    7/15/2018 - Paper - French - AFNOR
    Learn More
    €54.95

  • BS ISO 4586-3:2018

    High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
    7/6/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS ISO 4586-7:2018

    High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for design laminates
    7/6/2018 - Paper - English - BSI
    Learn More
    €193.80

  • BS ISO 4586-8:2018

    High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for alternative core laminates
    7/6/2018 - Paper - English - BSI
    Learn More
    €193.80

  • BS ISO 4586-1:2018

    High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Introduction and general information
    7/5/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS ISO 4586-2:2018

    High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Determination of properties
    7/5/2018 - Paper - English - BSI
    Learn More
    €310.08

  • BS ISO 4586-5:2018

    High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
    7/5/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS ISO 4586-6:2018

    High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
    7/5/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS ISO 4586-4:2018

    High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for compact laminates of thickness 2 mm and greater
    7/4/2018 - Paper - English - BSI
    Learn More
    €139.08

  • DIN 55543-6:2018-07

    Packaging Test - Test methods for packaging films - Part 6: Determination of grammage
    7/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • UNE-CEN/TR 17219:2018

    Plastics - Biodegradable thermoplastic mulch films for use in agriculture and horticulture - Guide for the quantification of alteration of films (Endorsed by Asociación Española de Normalización in July of 2018.)
    7/1/2018 - PDF - English - AENOR
    Learn More
    €65.00

  • ISO/FDIS 11502:2018

    Plastics - Film and sheeting - Determination of blocking resistance
    7/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/FDIS 11502:2018

    Plastics - Film and sheeting - Determination of blocking resistance
    7/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO/FDIS 15527:2018

    Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
    7/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/FDIS 527-3:2018

    Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
    7/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO/FDIS 527-3:2018

    Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
    7/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 4586-1:2018

    High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information
    7/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 4586-2:2018

    High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
    7/1/2018 - Paper - English - ISO
    Learn More
    €207.00

  • ISO 4586-3:2018

    High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
    7/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 4586-4:2018

    High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
    7/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 4586-5:2018

    High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
    7/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 4586-6:2018

    High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
    7/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 4586-7:2018

    High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Classification and specifications for design laminates
    7/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 4586-8:2018

    High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (usually called laminates) - Part 8: Classification and specifications for alternative core laminates
    7/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO/FDIS 11425:2018

    Rubber hoses and hose assemblies for automobile power-steering systems - Specification
    7/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • PD CEN/TS 1329-2:2018

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
    6/13/2018 - Paper - English - BSI
    Learn More
    €193.80

  • PD CEN/TR 17219:2018

    Plastics. Biodegradable thermoplastic mulch films for use in agriculture and horticulture. Guide for the quantification of alteration of films
    6/5/2018 - Paper - English - BSI
    Learn More
    €139.08

  • NF T54-017-1/IN1, NF EN 1329-1/IN1 (06/2018)

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for pipes, fittings and the system
    6/2/2018 - Paper - French - AFNOR
    Learn More
    €21.69

  • NF T54-017-1, NF EN 1329-1+A1 (06/2018)

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for pipes, fittings and the systems
    6/2/2018 - Paper - French - AFNOR
    Learn More
    €90.60

  • DIN ISO 3302-1:2018-06

    Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:2014)
    6/1/2018 - PDF - German - DIN
    Learn More
    €75.40

  • ASTM D6117-18

    Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
    6/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D6117-18 + Redline

    Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
    6/1/2018 - PDF - English - ASTM
    Learn More
    €49.00

  • ASTM D6112-18

    Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
    6/1/2018 - PDF - English - ASTM
    Learn More
    €59.00

  • ASTM D6112-18 + Redline

    Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
    6/1/2018 - PDF - English - ASTM
    Learn More
    €71.00

  • ASTM D6108-18

    Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
    6/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D6108-18 + Redline

    Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
    6/1/2018 - PDF - English - ASTM
    Learn More
    €49.00

  • ASTM D6111-18

    Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
    6/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D6111-18 + Redline

    Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
    6/1/2018 - PDF - English - ASTM
    Learn More
    €49.00

  • ISO/FDIS 20457:2018

    Plastics moulded parts - Tolerances and acceptance conditions
    6/1/2018 - Paper - English - ISO
    Learn More
    €144.00

  • DIN EN ISO 11833-1:2018-06

    Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO/DIS 11833-1:2018); German and English version prEN ISO 11833-1:2018
    6/1/2018 - PDF - English, German - DIN
    Learn More
    €89.00

  • DIN EN ISO 11963:2018-06

    Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO/DIS 11963:2018); German and English version prEN ISO 11963:2018
    6/1/2018 - PDF - English, German - DIN
    Learn More
    €75.40

  • ASTM D8195-18

    Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting
    6/1/2018 - PDF - English - ASTM
    Learn More
    €36.00

  • ISO/DIS 11963:2018

    Plastics - Polycarbonate sheets - Types, dimensions and characteristics
    6/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 11963:2018

    Plastics - Polycarbonate sheets - Types, dimensions and characteristics
    6/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO/DIS 11833-1:2018

    Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm
    6/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 11833-1:2018

    Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm
    6/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ASTM D4762-18

    Standard Guide for Testing Polymer Matrix Composite Materials
    6/1/2018 - PDF - English - ASTM
    Learn More
    €59.00

  • ASTM D4762-18 + Redline

    Standard Guide for Testing Polymer Matrix Composite Materials
    6/1/2018 - PDF - English - ASTM
    Learn More
    €71.00

  • DIN CEN/TS 17158 DIN SPEC 68158:2018-06

    Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material; German version CEN/TS 17158:2018
    6/1/2018 - PDF - German - DIN
    Learn More
    €49.40

  • PR NF T46-003-8, PR NF ISO 48-8 (05/2018)

    Rubber, vulcanized or thermoplastic - Determination of hardness - Part 8 : Apparent hardness of rubber-covered rollers by Pusey and Jones method
    5/28/2018 - Paper - English, French - AFNOR
    Learn More
    €78.60

  • PD CEN/TS 17158:2018

    Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)). Determination of particle size of lignocellosic material
    5/22/2018 - Paper - English - BSI
    Learn More
    €116.28

  • NF S93-102-3/A1, NF ISO 8871-3/A1 (05/2018)

    Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 3 : determination of released-particle count - Amendment 1
    5/18/2018 - Paper - French - AFNOR
    Learn More
    €21.69

  • NF S93-102-3/A1, NF ISO 8871-3/A1 (05/2018)

    Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 3 : determination of released-particle count - Amendment 1
    5/18/2018 - Paper - English - AFNOR
    Learn More
    €21.69

  • NF T54-915-1, NF EN 1453-1 (05/2018)

    Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinylchloride) (PVC-U) - Part 1 : specifications for pipes and the system
    5/11/2018 - Paper - French - AFNOR
    Learn More
    €83.18

  • NF T54-915-1, NF EN 1453-1 (05/2018)

    Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinylchloride) (PVC-U) - Part 1 : specifications for pipes and the system
    5/11/2018 - Paper - English - AFNOR
    Learn More
    €83.18

  • PR NF T46-003-6, PR NF ISO 48-6 (05/2018)

    Rubber, vulcanized or thermoplastic - Determination of hardness - Part 6: Apparent hardness of rubber-covered rollers by IRHD method
    5/9/2018 - Paper - English, French - AFNOR
    Learn More
    €72.38

  • PR NF T54-802 (05/2018)

    Plastics - Liners for swimming pools made of plasticized poly(vinyl chloride) (PVC-P) membranes - Guidance for the installation, refurbishment, exploitation and maintenance
    5/4/2018 - Paper - French - AFNOR
    Learn More
    €78.60

  • PR NF T54-804 (05/2018)

    Plastics - Plasticized poly(vinyl chloride) (PVC-P) reinforced membranes for swimming pools - Guidance for the installation, change, exploitation and maintenance
    5/4/2018 - Paper - French - AFNOR
    Learn More
    €105.05

  • ASTM D2903-18

    Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
    5/1/2018 - PDF - English - ASTM
    Learn More
    €36.00

  • ASTM D2903-18 + Redline

    Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
    5/1/2018 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM D3150-18

    Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
    5/1/2018 - PDF - English - ASTM
    Learn More
    €36.00

  • ASTM D3150-18 + Redline

    Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
    5/1/2018 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM F3299-18

    Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P2O5 Sensor)
    5/1/2018 - PDF - English - ASTM
    Learn More
    €36.00

  • ASTM D5628-18

    Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
    5/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D5628-18 + Redline

    Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
    5/1/2018 - PDF - English - ASTM
    Learn More
    €49.00

  • DIN EN 13207:2018-05

    Plastics - Thermoplastic silage films and tubes for use in agriculture; German version EN 13207:2018
    5/1/2018 - PDF - German - DIN
    Learn More
    €89.00

  • DIN EN 13655:2018-05

    Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture; German version EN 13655:2018
    5/1/2018 - PDF - German - DIN
    Learn More
    €108.80

  • DIN EN 13655:2018-05

    Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture; German version EN 13655:2018
    5/1/2018 - PDF - English - DIN
    Learn More
    €136.20

  • ISO 3949:2018

    Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
    5/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 3949:2018

    Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
    5/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • UNE-EN ISO 28017:2018

    Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018)
    4/25/2018 - PDF - Spanish - AENOR
    Learn More
    €56.00

  • PR NF T46-003-7, PR NF ISO 48-7 (04/2018)

    Rubber, vulcanized or thermoplastic - Determination of hardness - Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
    4/18/2018 - Paper - English, French - AFNOR
    Learn More
    €72.38

  • BS ISO 20819:2018

    Plastics. Wood-plastic recycled composites (WPRC). Specification
    4/12/2018 - Paper - English - BSI
    Learn More
    €139.08

  • UNE-EN ISO 1825:2018

    Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017)
    4/11/2018 - PDF - Spanish - AENOR
    Learn More
    €61.00

  • UNE-EN ISO 10960:2018

    Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017)
    4/11/2018 - PDF - Spanish - AENOR
    Learn More
    €44.00

  • UNE-EN 514:2018

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints
    4/11/2018 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • NF P16-353-2, NF EN 13476-2 (04/2018)

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2 : specifications for pipes and fittings with smooth internal and external surface and system, Type A
    4/4/2018 - Paper - French - AFNOR
    Learn More
    €99.65

  • NF P16-353-1, NF EN 13476-1 (04/2018)

    Plastic piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1 : general requirements and performance characteristics
    4/4/2018 - Paper - French - AFNOR
    Learn More
    €72.58

  • NF P16-353-3, NF EN 13476-3 (04/2018)

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3 : specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
    4/4/2018 - Paper - French - AFNOR
    Learn More
    €99.65

  • NF P16-353-2, NF EN 13476-2 (04/2018)

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2 : specifications for pipes and fittings with smooth internal and external surface and system, Type A
    4/4/2018 - Paper - English - AFNOR
    Learn More
    €99.65

  • NF P16-353-1, NF EN 13476-1 (04/2018)

    Plastic piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1 : general requirements and performance characteristics
    4/4/2018 - Paper - English - AFNOR
    Learn More
    €72.58

  • NF P16-353-3, NF EN 13476-3 (04/2018)

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3 : specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
    4/4/2018 - Paper - English - AFNOR
    Learn More
    €99.65

  • ASTM D6110-18

    Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
    4/1/2018 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM D6110-18 + Redline

    Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
    4/1/2018 - PDF - English - ASTM
    Learn More
    €55.00

  • ASTM D2838-18

    Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
    4/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • DVS 2225-6:2018-04


    4/1/2018 - PDF - German - DVS
    Learn More
    €59.67

  • DVS 2225-2:2018-04


    4/1/2018 - PDF - German - DVS
    Learn More
    €66.30

  • DIN EN 477:2018-04

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to impact of profiles by falling mass; German version EN 477:2018
    4/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • DIN EN 478:2018-04

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C; German version EN 478:2018
    4/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • DIN EN 479:2018-04

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion; German version EN 479:2018
    4/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • DIN EN 514:2018-04

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints; German version EN 514:2018
    4/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • DIN EN 477:2018-04

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to impact of profiles by falling mass; German version EN 477:2018
    4/1/2018 - PDF - English - DIN
    Learn More
    €59.60

  • DIN EN 478:2018-04

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C; German version EN 478:2018
    4/1/2018 - PDF - English - DIN
    Learn More
    €51.00

  • DIN EN 479:2018-04

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion; German version EN 479:2018
    4/1/2018 - PDF - English - DIN
    Learn More
    €51.00

  • DIN EN 514:2018-04

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints; German version EN 514:2018
    4/1/2018 - PDF - English - DIN
    Learn More
    €85.50

  • ASTM D787-18

    Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
    4/1/2018 - PDF - English - ASTM
    Learn More
    €36.00

  • ASTM D787-18 + Redline

    Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
    4/1/2018 - PDF - English - ASTM
    Learn More
    €43.00

  • PR NF T47-820-3, PR NF EN 1337-3 (03/2018)

    Structural bearings - Part 3: Elastomeric bearings
    3/31/2018 - Paper - English, French - AFNOR
    Learn More
    €163.85

  • PR NF F31-812, PR NF F 31-812 (03/2018)

    Matériel roulant ferroviaire - Revêtements de sol en caoutchouc
    3/30/2018 - Paper - French - AFNOR
    Learn More
    €63.03

  • BS EN 13655:2018

    Plastics. Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture
    3/15/2018 - Paper - English - BSI
    Learn More
    €225.72

  • BS EN 12691:2018

    Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact
    3/15/2018 - Paper - English - BSI
    Learn More
    €116.28

  • ASTM C722-18

    Standard Specification for Chemical-Resistant Monolithic Floor Surfacings
    3/15/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM C722-18 + Redline

    Standard Specification for Chemical-Resistant Monolithic Floor Surfacings
    3/15/2018 - PDF - English - ASTM
    Learn More
    €49.00

  • UNE-EN 438-9:2018

    High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates
    3/14/2018 - PDF - Spanish - AENOR
    Learn More
    €50.00

  • BS ISO 9631:2018

    Rubber seals. Joint rings for pipelines for hot-water supply up to 110 C. Specification for the material
    3/14/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS EN 13207:2018

    Plastics. Thermoplastic silage films and tubes for use in agriculture
    3/9/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS EN ISO 28017:2018

    Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification
    3/9/2018 - Paper - English - BSI
    Learn More
    €193.80

  • BS EN 479:2018

    Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of heat reversion
    3/9/2018 - Paper - English - BSI
    Learn More
    €116.28

  • DIN EN 14932:2018-03

    Plastics - Thermoplastic stretch films for wrapping silage bales; German version EN 14932:2018
    3/1/2018 - PDF - German - DIN
    Learn More
    €119.60

  • DIN EN 17033:2018-03

    Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods; German version EN 17033:2018
    3/1/2018 - PDF - German - DIN
    Learn More
    €119.60

  • DIN EN 17098-1:2018-03

    Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films; German version EN 17098-1:2018
    3/1/2018 - PDF - German - DIN
    Learn More
    €96.00

  • DIN EN 17098-2:2018-03

    Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique; German version EN 17098-2:2018
    3/1/2018 - PDF - German - DIN
    Learn More
    €61.70

  • DIN EN 14932:2018-03

    Plastics - Thermoplastic stretch films for wrapping silage bales; German version EN 14932:2018
    3/1/2018 - PDF - English - DIN
    Learn More
    €149.40

  • DIN EN 17033:2018-03

    Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods; German version EN 17033:2018
    3/1/2018 - PDF - English - DIN
    Learn More
    €149.40

  • DIN EN 17098-1:2018-03

    Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films; German version EN 17098-1:2018
    3/1/2018 - PDF - English - DIN
    Learn More
    €120.20

  • DIN EN 17098-2:2018-03

    Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique; German version EN 17098-2:2018
    3/1/2018 - PDF - English - DIN
    Learn More
    €77.20

  • DIN EN 438-9:2018-03

    High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates; German version EN 438-9:2017
    3/1/2018 - PDF - German - DIN
    Learn More
    €75.40

  • DIN EN 438-9:2018-03

    High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates; German version EN 438-9:2017
    3/1/2018 - PDF - English - DIN
    Learn More
    €94.40

  • ISO 21012:2018

    Cryogenic vessels - Hoses
    3/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 21012:2018

    Cryogenic vessels - Hoses
    3/1/2018 - Paper - French - ISO
    Learn More
    €92.00

  • ISO 9631:2018

    Rubber seals - Joint rings for pipelines for hot-water supply up to 110 °C - Specification for the material
    3/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 20819:2018

    Plastics - Wood-plastic recycled composites (WPRC) - Specification
    3/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • NF T54-202, NF EN 13207 (02/2018)

    Plastics - Thermoplastic silage films and tubes for use in agriculture
    2/28/2018 - Paper - French - AFNOR
    Learn More
    €63.38

  • NF T54-422, NF EN 13655 (02/2018)

    Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture
    2/28/2018 - Paper - French - AFNOR
    Learn More
    €63.38

  • NF T54-202, NF EN 13207 (02/2018)

    Plastics - Thermoplastic silage films and tubes for use in agriculture
    2/28/2018 - Paper - English - AFNOR
    Learn More
    €63.38

  • NF T54-422, NF EN 13655 (02/2018)

    Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture
    2/28/2018 - Paper - English - AFNOR
    Learn More
    €63.38

  • PR NF J95-029, PR NF EN ISO 8469 (02/2018)

    Small craft - Non-fire-resistant fuel hoses
    2/28/2018 - Paper - English, French - AFNOR
    Learn More
    €72.38

  • NF T47-285, NF EN ISO 28017 (02/2018)

    Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification
    2/28/2018 - Paper - French - AFNOR
    Learn More
    €63.38

  • NF T47-285, NF EN ISO 28017 (02/2018)

    Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification
    2/28/2018 - Paper - English - AFNOR
    Learn More
    €63.38

  • PR NF J22-209, PR NF EN ISO 7840 (02/2018)

    Small craft - Fire-resistant fuel hoses
    2/23/2018 - Paper - English, French - AFNOR
    Learn More
    €95.10

  • PR NF T47-283, PR NF EN 1762 (02/2018)

    Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
    2/23/2018 - Paper - French - AFNOR
    Learn More
    €72.38

  • BS EN 17033:2018

    Plastics. Biodegradable mulch films for use in agriculture and horticulture. Requirements and test methods
    2/22/2018 - Paper - English - BSI
    Learn More
    €225.72

  • JIS K 6322:2018

    Conveyor belts - Specification for rubber covered conveyor belts of textile construction
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €36.27

  • JIS K 6410-3:2018

    Elastomeric seismic-protection isolators for buildings - Part 3: High-durability and high-performance specifications, and test methods
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €36.27

  • BS EN ISO 8028:2018

    Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification
    2/19/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS EN 477:2018

    Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the resistance to impact of profiles by falling mass
    2/16/2018 - Paper - English - BSI
    Learn More
    €116.28

  • ASTM F2136-18

    Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
    2/15/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM F2136-18 + Redline

    Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
    2/15/2018 - PDF - English - ASTM
    Learn More
    €49.00

  • BS EN 478:2018

    Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the appearance after exposure at 150 C
    2/15/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS EN 514:2018

    Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the strength of welded corners and T-joints
    2/15/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS EN 14932:2018

    Plastics. Thermoplastic stretch films for wrapping silage bales
    2/7/2018 - Paper - English - BSI
    Learn More
    €255.36

  • PR NF P24-504, PR NF EN 513 (02/2018)

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering
    2/5/2018 - Paper - English, French - AFNOR
    Learn More
    €72.38

  • NF C26-183-6/A2, NF EN IEC 60893-3-6/A2 (02/2018)

    Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
    2/2/2018 - PDF - French - UTE
    Learn More
    €45.98

  • NF C26-183-6/A2, NF EN IEC 60893-3-6/A2 (02/2018)

    Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
    2/2/2018 - PDF - English - UTE
    Learn More
    €45.98

  • DIN ISO 15082:2018-02

    Road vehicles - Tests for rigid plastic safety glazing materials (ISO 15082:2016)
    2/1/2018 - PDF - German - DIN
    Learn More
    €130.80

  • DIN ISO 15082:2018-02

    Road vehicles - Tests for rigid plastic safety glazing materials (ISO 15082:2016)
    2/1/2018 - PDF - English - DIN
    Learn More
    €163.50

  • ISO 28017:2018

    Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification
    2/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 28017:2018

    Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification
    2/1/2018 - Paper - French - ISO
    Learn More
    €92.00

  • DIN EN 15534-1:2018-02

    Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014+A1:2017
    2/1/2018 - PDF - German - DIN
    Learn More
    €141.90

  • DIN EN 15534-1:2018-02

    Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014+A1:2017
    2/1/2018 - PDF - English - DIN
    Learn More
    €177.20

  • BS EN 17098-2:2018

    Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation. Method for film permeability determination using a static technique
    1/31/2018 - Paper - English - BSI
    Learn More
    €139.08

  • NF T47-273, NF EN ISO 8028 (01/2018)

    Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification
    1/31/2018 - Paper - French - AFNOR
    Learn More
    €40.29

  • NF T47-273, NF EN ISO 8028 (01/2018)

    Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification
    1/31/2018 - Paper - English - AFNOR
    Learn More
    €40.29

  • NF P24-501, NF EN 477 (01/2018)

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to impact of profiles by falling mass
    1/31/2018 - Paper - French - AFNOR
    Learn More
    €29.11

  • NF P24-502, NF EN 478 (01/2018)

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 oC
    1/31/2018 - Paper - French - AFNOR
    Learn More
    €21.69

  • NF P24-503, NF EN 479 (01/2018)

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion
    1/31/2018 - Paper - French - AFNOR
    Learn More
    €29.11

  • NF P24-505, NF EN 514 (01/2018)

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints
    1/31/2018 - Paper - French - AFNOR
    Learn More
    €50.74

  • NF P24-501, NF EN 477 (01/2018)

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to impact of profiles by falling mass
    1/31/2018 - Paper - English - AFNOR
    Learn More
    €29.11

  • NF P24-502, NF EN 478 (01/2018)

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 oC
    1/31/2018 - Paper - English - AFNOR
    Learn More
    €21.69

  • NF P24-503, NF EN 479 (01/2018)

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion
    1/31/2018 - Paper - English - AFNOR
    Learn More
    €29.11

  • NF P24-505, NF EN 514 (01/2018)

    Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints
    1/31/2018 - Paper - English - AFNOR
    Learn More
    €50.74

  • BS EN 17098-1:2018

    Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation. Specifications for barrier films
    1/29/2018 - Paper - English - BSI
    Learn More
    €193.80

Items 1 to 200 of 2887 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
To top