73.100 : Mining equipment

Items 1 to 200 of 566 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  • DIN EN ISO 19225:2018-04

    Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017); German version EN ISO 19225:2017
    4/1/2018 - PDF - German - DIN
    Learn More
    €108.80

  • DIN EN ISO 19225:2018-04

    Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017); German version EN ISO 19225:2017
    4/1/2018 - PDF - English - DIN
    Learn More
    €136.20

  • DIN 4118:2018-03

    Headgears and winding towers for mines - Design loads, calculating- and construction principles
    3/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • BS EN ISO 19225:2017

    Underground mining machines. Mobile extracting machines at the face. Safety requirements for shearer loaders and plough systems
    1/16/2018 - Paper - English - BSI
    Learn More
    €225.72

  • ASTM D5850-18

    Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
    1/1/2018 - PDF - English - ASTM
    Learn More
    €44.00

  • ASTM D5850-18 + Redline

    Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
    1/1/2018 - PDF - English - ASTM
    Learn More
    €53.00

  • ASTM D5783-18

    Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
    1/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM D5783-18 + Redline

    Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
    1/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D5782-18

    Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
    1/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM D5782-18 + Redline

    Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
    1/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • NF E56-001, NF EN ISO 19225 (12/2017)

    Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems
    12/20/2017 - Paper - French - AFNOR
    Learn More
    €72.58

  • NF E56-001, NF EN ISO 19225 (12/2017)

    Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems
    12/20/2017 - Paper - English - AFNOR
    Learn More
    €72.58

  • DVGW G 474:2017-12

    Provisions for safe operation of gas pipeworks influenced by mining activities
    12/1/2017 - PDF - German - DVGW
    Learn More
    €70.67

  • BS ISO 19224:2017

    Continuous surface miners (CSM). Safety requirements
    10/31/2017 - Paper - English - BSI
    Learn More
    €193.80

  • DIN EN ISO/IEC 80079-38:2017-10

    Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016); German version EN ISO/IEC 80079-38:2016
    10/1/2017 - PDF - German - DIN
    Learn More
    €153.40

  • DIN EN ISO/IEC 80079-38:2017-10

    Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016); German version EN ISO/IEC 80079-38:2016
    10/1/2017 - PDF - English - DIN
    Learn More
    €191.70

  • ISO/FDIS 19296:2017

    Mining - Mobile machines working underground - Machine safety
    10/1/2017 - Paper - English - ISO
    Learn More
    €165.00

  • ISO/FDIS 19296:2017

    Mining - Mobile machines working underground - Machine safety
    10/1/2017 - Paper - French - ISO
    Learn More
    €165.00

  • ISO/DIS 18758-1:2017

    Mining and earth-moving machinery - Rock drill rigs and rock reinforcement rigs - Part 1: Terminology
    9/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 18758-2:2017

    Mining and earth-moving machinery - Rock drill rigs and rock reinforcement rigs - Part 2: Safety requirements
    9/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 19224:2017

    Continuous surface miners (CSM) - Safety requirements
    9/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • NF S66-836-38, NF EN ISO/CEI 80079-38 (05/2017)

    Explosive atmospheres - Part 38 : equipment and components in explosive atmospheres in underground mines
    5/12/2017 - Paper - English, French - AFNOR
    Learn More
    €140.03

  • DIN 21500:2017-05

    Shaft sinking in mining - design and dimensioning
    5/1/2017 - PDF - German - DIN
    Learn More
    €89.00

  • ISO 19225:2017

    Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems
    5/1/2017 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 19225:2017

    Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems
    5/1/2017 - Paper - French - ISO
    Learn More
    €123.00

  • ASTM D6032/D6032M-17

    Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
    3/1/2017 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM D6032/D6032M-17 + Redline

    Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
    3/1/2017 - PDF - English - ASTM
    Learn More
    €47.00

  • BS EN ISO/IEC 80079-38:2016

    Explosive atmospheres. Equipment and components in explosive atmospheres in underground mines
    1/31/2017 - Paper - English - BSI
    Learn More
    €271.32

  • CSA M421-16:2016

    Use of electricity in mines
    12/1/2016 - PDF - English - CSA
    Learn More
    €81.66

  • DIN 4930:2016-10

    Pipes for use in freezing shaft sinking - Dimensions and technical delivery conditions
    10/1/2016 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 22261-2:2016-10

    Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 2: Calculation principles
    10/1/2016 - PDF - German - DIN
    Learn More
    €209.50

  • DIN 21194:2016-10

    Rope end fitting in abutments for guide ropes - Safety requirements and testing
    10/1/2016 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 21530-2:2016-09

    Mine support - Part 2: Dimensions, designation and statical values
    9/1/2016 - PDF - German - DIN
    Learn More
    €153.40

  • DIN 21530-3:2016-09

    Mine support - Part 3: Requirements
    9/1/2016 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 21530-4:2016-09

    Mine support - Part 4: Testing
    9/1/2016 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 21635:2016-09

    Air regulation systems in mining - Air locks - Building and operation
    9/1/2016 - PDF - German - DIN
    Learn More
    €68.30

  • DIN 21636:2016-09

    Air regulation systems for mining - Belt-conveyors-way air locks - Dimensions, identifications, requirements and testing
    9/1/2016 - PDF - German - DIN
    Learn More
    €103.00

  • DIN 21637:2016-09

    Air regulation systems for mining - Wing air doors for haulage tracks - Double-wing type doors with pressure reduction
    9/1/2016 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 21638:2016-09

    Air regulation systems for mining - Wing air locks for travelling tracks - Double-wing type doors with pressure reduction
    9/1/2016 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 21639:2016-09

    Air regulation systems for mining - Travel-way air locks with pressure-relief air doors
    9/1/2016 - PDF - German - DIN
    Learn More
    €40.80

  • UNE-EN 15947-3:2016

    Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 3: Minimum labelling requirements
    4/6/2016 - PDF - Spanish - AENOR
    Learn More
    €57.00

  • UNE-EN 15947-4:2016

    Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
    4/6/2016 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN 15947-5:2016

    Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 5: Requirements for construction and performance
    4/6/2016 - PDF - Spanish - AENOR
    Learn More
    €57.00

  • DIN 21151:2016-03

    Shaft sinking - Pulleys for flat winding ropes - Safety requirements and testing
    3/1/2016 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 21198:2016-03

    Shaft sinking - Shaft plumbs
    3/1/2016 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 21530-5:2016-03

    Mine support - Part 5: Marking of parts of mine support
    3/1/2016 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 20352:2016-03

    Rock drilling - Sqare driver connection for rotary drilling - Dimensions, design
    3/1/2016 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 20353:2016-03

    Rock drilling - Trapezoidal thread connection for percussive drilling - Dimensions, design
    3/1/2016 - PDF - German - DIN
    Learn More
    €33.60

  • ASTM D8006-16

    Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
    3/1/2016 - PDF - English - ASTM
    Learn More
    €39.00

  • DIN EN ISO 19296:2015-12

    Mining and earthmoving machinery - Mobile machines working underground - Machine safety (ISO/DIS 19296.2:2015); German and English version prEN ISO 19296:2015
    12/1/2015 - PDF - English, German - DIN
    Learn More
    €125.30

  • DIN 22261-1:2015-11

    Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 1: Construction, commissioning and monitoring
    11/1/2015 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 22261-3:2015-11

    Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 3: Execution of steel structures
    11/1/2015 - PDF - German - DIN
    Learn More
    €125.30

  • DIN 22261-4:2015-11

    Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 4: Hoisting winch brakes
    11/1/2015 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 22261-5:2015-11

    Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 5: Slewing brakes and overload protecting devices
    11/1/2015 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 22261-6:2015-11

    Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 6: Examination of ropes and rope end fittings
    11/1/2015 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 20500:2015-11

    Underground mine railways - Track gauges and rails - Standard types and selection
    11/1/2015 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 20501:2015-11

    Underground mine railways - But strap Fl 30 for rail 30E1
    11/1/2015 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 20506:2015-11

    Underground mine railways - Clamping plates for securing rails onto steel supports
    11/1/2015 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 20600:2015-11

    Mine railways - Wheel profils for locomotives and cars
    11/1/2015 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 22258-2:2015-09

    Chain connectors - Part 2: Kenter type connectors
    9/1/2015 - PDF - German - DIN
    Learn More
    €75.40

  • DIN SPEC 91322:2015-09

    Bore head radar for horizontal directional drilling (HDD-radar) - Environment, conditions and limitations of use
    9/1/2015 - PDF - English - DIN
    Learn More
    €66.10

  • DIN 21164:2015-08

    Shaft sinking - Riders for winding kibbles - Safety requirements and testing
    8/1/2015 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 20351:2015-08

    Rock drilling - Wedge-shaped shank connections for rotary drilling equipment - Dimensions, design
    8/1/2015 - PDF - German - DIN
    Learn More
    €47.60

  • ASTM D6151/D6151M-15 + Redline

    Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
    7/1/2015 - PDF - English - ASTM
    Learn More
    €53.00

  • ASTM D6151/D6151M-15

    Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
    7/1/2015 - PDF - English - ASTM
    Learn More
    €44.00

  • PR NF E58-330, PR NF EN ISO 19296 (05/2015)

    Mining and earthmoving machinery - Mobile machines working underground - Machine Safety
    5/8/2015 - Paper - French - AFNOR
    Learn More
    €86.46

  • UNE-EN 1127-2:2014

    Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining (Endorsed by AENOR in April of 2015.)
    4/1/2015 - PDF - English - AENOR
    Learn More
    €81.00

  • DIN 20597:2015-04

    Suspended monorails for mining - Toothed disc for roller fairleads - Dimensions, materials
    4/1/2015 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 20622:2015-04

    Suspended-monorail transport systems for mining - Permissible loads for suspensions and their abnutments and railprofile I 140 E
    4/1/2015 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 20629-2:2015-04

    Suspended monorails for mining - Mounting regulations - Part:2: For loco-driven suspended monorails
    4/1/2015 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 23330:2015-03

    Safety marking for mines
    3/1/2015 - PDF - German - DIN
    Learn More
    €47.60

  • UNE-EN 16228-5:2015

    Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
    2/18/2015 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 16228-1:2015

    Drilling and foundation equipment - Safety - Part 1: Common requirements
    2/18/2015 - PDF - Spanish - AENOR
    Learn More
    €135.00

  • UNE-EN 16228-2:2015

    Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
    2/18/2015 - PDF - Spanish - AENOR
    Learn More
    €55.00

  • UNE-EN 16228-3:2015

    Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
    2/18/2015 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN 16228-4:2015

    Drilling and foundation equipment - Safety - Part 4: Foundation equipment
    2/18/2015 - PDF - Spanish - AENOR
    Learn More
    €46.00

  • UNE-EN 16228-6:2015

    Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
    2/18/2015 - PDF - Spanish - AENOR
    Learn More
    €48.00

  • UNE-EN 16228-7:2015

    Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
    2/18/2015 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • NFPA 122:2015

    Standard for Fire Prevention and Control in Metal/Nonmetal Mining and Metal Mineral Processing Facilities
    1/1/2015 - PDF sécurisé - English - NFPA
    Learn More
    €41.65

  • ASTM D5787-14 + Redline

    Standard Practice for Monitoring Well Protection
    10/1/2014 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D5787-14

    Standard Practice for Monitoring Well Protection
    10/1/2014 - PDF - English - ASTM
    Learn More
    €39.00

  • DIN EN 1127-2:2014-09

    Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining; German version EN 1127-2:2014
    9/1/2014 - PDF - German - DIN
    Learn More
    €108.80

  • DIN EN 1127-2:2014-09

    Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining; German version EN 1127-2:2014
    9/1/2014 - PDF - English - DIN
    Learn More
    €136.20

  • BS EN 1127-2:2014

    Explosive atmospheres. Explosion prevention and protection. Basic concepts and methodology for mining
    6/30/2014 - Paper - English - BSI
    Learn More
    €225.72

  • BS EN 12111:2014

    Tunnelling machines. Road headers and continuous miners. Safety requirements
    5/31/2014 - Paper - English - BSI
    Learn More
    €255.36

  • JIS G 3465:2014

    Seamless steel tubes for drilling
    2/20/2014 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN 20317:2014-02

    Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design
    2/1/2014 - PDF - German - DIN
    Learn More
    €23.80

  • NBN EN 1127-2

    Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
    1/7/2014 - PDF - French - NBN
    Learn More
    €77.00

  • NBN EN 1127-2

    Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
    1/7/2014 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 1127-2

    Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
    1/7/2014 - PDF - English - NBN
    Learn More
    €77.00

  • ASTM D6169/D6169M-13 + Redline

    Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
    8/1/2013 - PDF - English - ASTM
    Learn More
    €53.00

  • ASTM D6169/D6169M-13

    Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
    8/1/2013 - PDF - English - ASTM
    Learn More
    €44.00

  • ASTM D5781/D5781M-13 + Redline

    Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
    7/1/2013 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D5781/D5781M-13

    Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
    7/1/2013 - PDF - English - ASTM
    Learn More
    €39.00

  • DIN 21186:2013-03

    Shaft sinking - Rope suspension gears for load hoisting in shafts
    3/1/2013 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 21187:2013-03

    Shaft sinking - Chain suspension gears for load hoisting in shafts
    3/1/2013 - PDF - German - DIN
    Learn More
    €40.80

  • DIN EN 60079-35-2 VDE 0170-14-2:2012-12

    Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters (IEC 60079-35-2:2011); German version EN 60079-35-2:2012
    12/1/2012 - Paper - German - VDE
    Learn More
    €49.48

  • DIN 20316:2012-11

    Rock drilling - Thread connections for thin-walled rotary drilling equipment - Dimensions, design
    11/1/2012 - PDF - German - DIN
    Learn More
    €33.60

  • BS EN 60079-35-2:2012

    Explosive atmospheres. Caplights for use in mines susceptible to firedamp. Performance and other safety-related matters
    9/30/2012 - Paper - English - BSI
    Learn More
    €139.08

  • ASTM D6286-12 + Redline

    Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
    9/1/2012 - PDF - English - ASTM
    Learn More
    €53.00

  • ASTM D6286-12

    Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
    9/1/2012 - PDF - English - ASTM
    Learn More
    €44.00

  • UNE-EN 1889-1:2012

    Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
    5/16/2012 - PDF - Spanish - AENOR
    Learn More
    €64.00

  • DIN 22270:2012-05

    Continuous Surface Miner (CSM) - Safety
    5/1/2012 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 21325:2012-02

    Pit converted timber - Timber sleepers
    2/1/2012 - PDF - German - DIN
    Learn More
    €33.60

  • DIN EN 60079-35-1 VDE 0170-14-1:2012-01

    Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion (IEC 60079-35-1:2011); German version EN 60079-35-1:2011 + Cor. :2011
    1/1/2012 - Paper - German - VDE
    Learn More
    €74.10

  • AS/NZS 60079.35.2:2012

    Explosive atmospheres Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters
    1/1/2012 - PDF sécurisé - English - SA
    Learn More
    €61.12

  • DIN 20551:2012-01

    Mine cars - Front wall, casing, frame, buffer sheet
    1/1/2012 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 20553:2012-01

    Wheel sets with taper roller bearings for mine cars; without springs
    1/1/2012 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 20555:2012-01

    Wheel sets with taper roller bearings for mine cars, exterior spring suspension
    1/1/2012 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 20556:2012-01

    Wheel sets with taper roller bearings for mine cars, interior spring suspension
    1/1/2012 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 20586:2012-01

    Rail fastenings in mining for 30E1 and 33E1 rails on wooden sleepers
    1/1/2012 - PDF - German - DIN
    Learn More
    €54.80

  • NF E56-005-1, NF EN 1889-1 (12/2011)

    Machines for underground mines - Mobile machines working underground - Safety - Part 1 : rubber tyred vehicles
    12/1/2011 - Paper - French - AFNOR
    Learn More
    €83.18

  • NF E56-005-1, NF EN 1889-1 (12/2011)

    Machines for underground mines - Mobile machines working underground - Safety - Part 1 : rubber tyred vehicles
    12/1/2011 - Paper - English - AFNOR
    Learn More
    €83.18

  • ASTM D6391-11 + Redline

    Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
    11/1/2011 - PDF - English - ASTM
    Learn More
    €53.00

  • ASTM D6391-11

    Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
    11/1/2011 - PDF - English - ASTM
    Learn More
    €44.00

  • DIN EN 1889-1:2011-10

    Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles; German version EN 1889-1:2011
    10/1/2011 - PDF - German - DIN
    Learn More
    €119.60

  • DIN EN 1889-1:2011-10

    Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles; German version EN 1889-1:2011
    10/1/2011 - PDF - English - DIN
    Learn More
    €149.40

  • BS EN 1889-1:2011

    Machines for underground mines. Mobile machines working underground. Safety. Rubber tyred vehicles
    8/31/2011 - Paper - English - BSI
    Learn More
    €255.36

  • DIN 22100-7:2011-08

    Articles and materials from synthetics for use in underground mines - Part 7: Safety requirements, testing, marking
    8/1/2011 - PDF - German - DIN
    Learn More
    €153.40

  • DIN 20379-1:2011-05

    Rock drilling - Part 1: Tapered bits for percussive flush drilling
    5/1/2011 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 20379-2:2011-05

    Rock drilling - Part 2: Bits with internal thread for percussive flush drilling
    5/1/2011 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 21634:2011-03

    Air regulation systems for mining - Swinging roadway air doors for haulage tracks
    3/1/2011 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 21633:2011-03

    Air regulating systems for mining - Wing air doors for haulage tracks - Double-wing type doors without pressure reduction
    3/1/2011 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 21632:2011-03

    Air regulating systems for mining - Wing air doors for haulage tracks - One-wing type air doors without pressure reduction
    3/1/2011 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 21631:2011-03

    Air regulating systems for mining - Wing air doors for travelling tracks - One-wing type air doors without pressure reduction
    3/1/2011 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 21626:2011-02

    Fans with hybrid (electric/pneumatic) motor drive intended for use in potentially explosive atmospheres in coal mines
    2/1/2011 - PDF - German - DIN
    Learn More
    €40.80

  • NBN EN 1889-1

    Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
    1/9/2011 - PDF - French - NBN
    Learn More
    €77.00

  • NBN EN 1889-1

    Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
    1/9/2011 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 1889-1

    Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
    1/9/2011 - PDF - English - NBN
    Learn More
    €77.00

  • AS/NZS 60079.35.1:2011

    Explosive atmospheres Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion
    1/1/2011 - PDF sécurisé - English - SA
    Learn More
    €69.60

  • DIN 22100-3:2010-10

    Articles and materials from synthetic for use in underground mines - Part 3: Spiral air ducts - Safety requirements, testing, marking
    10/1/2010 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 22100-4:2010-10

    Articles and materials from synthetic for use in underground mines - Part 4: Flat air ducts - Safety requirements, testing, marking
    10/1/2010 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 22100-5:2010-10

    Articles and materials from synthetic for use in underground mines - Part 5: Tubes, tube isolations and hoses - Safety requirements, testing, marking
    10/1/2010 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 22100-6:2010-10

    Articles and materials from synthetic for use in underground mines - Part 6: Sheeting, coated/uncoated tissue, brattice materials and lagging mats - Safety requirements, testing, marking
    10/1/2010 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 21605:2010-07

    Auxiliary ventilation for mining - Flexible plastic ventilation ducts for exhaust and forced ventilation - Spiral ventilation ducts
    7/1/2010 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 21606:2010-07

    Auxiliary ventilation for mining - Flexible plastic ventilation ducts for forced ventilation - Flat ventilation ducts
    7/1/2010 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 21610:2010-07

    Auxiliary ventilation for mining - Flexible plastic air ducts - Requirements and test methods
    7/1/2010 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 21612:2010-07

    Auxiliary ventilation for mining - Cladding material for flexible airducts - Requirements, testing
    7/1/2010 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 21625:2010-07

    Fans with electric motor drive intended for use in potentially explosive atmospheres in coal mines
    7/1/2010 - PDF - German - DIN
    Learn More
    €40.80

  • UNE-EN 1804-1:2003+A1:2010

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
    5/26/2010 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN 1804-2:2003+A1:2010

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
    5/26/2010 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN 1804-3:2007+A1:2010

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
    5/26/2010 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • DIN EN 1804-1:2010-05

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements; German version EN 1804-1:2001+A1:2010
    5/1/2010 - PDF - German - DIN
    Learn More
    €108.80

  • DIN EN 1804-1:2010-05

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements; German version EN 1804-1:2001+A1:2010
    5/1/2010 - PDF - English - DIN
    Learn More
    €136.20

  • DIN EN 1804-2:2010-05

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams; German version EN 1804-2:2001+A1:2010
    5/1/2010 - PDF - German - DIN
    Learn More
    €108.80

  • DIN EN 1804-2:2010-05

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams; German version EN 1804-2:2001+A1:2010
    5/1/2010 - PDF - English - DIN
    Learn More
    €136.20

  • DIN EN 1804-3:2010-05

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems; German version EN 1804-3:2006+A1:2010
    5/1/2010 - PDF - German - DIN
    Learn More
    €103.00

  • DIN EN 1804-3:2010-05

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems; German version EN 1804-3:2006+A1:2010
    5/1/2010 - PDF - English - DIN
    Learn More
    €128.80

  • NF E56-003-2/IN1, NF EN 1804-2/IN1 (05/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2 : power set legs and rams
    5/1/2010 - Paper - French - AFNOR
    Learn More
    €21.69

  • NF E56-003-2, NF EN 1804-2+A1 (05/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2 : power set legs and rams
    5/1/2010 - Paper - French - AFNOR
    Learn More
    €83.18

  • NF E56-003-2/IN1, NF EN 1804-2/IN1 (05/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2 : power set legs and rams
    5/1/2010 - Paper - English - AFNOR
    Learn More
    €21.69

  • NF E56-003-2, NF EN 1804-2+A1 (05/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2 : power set legs and rams
    5/1/2010 - Paper - English - AFNOR
    Learn More
    €83.18

  • DIN 20361:2010-04

    Rock drilling - Chuck bushings - Connecting dimensions, material, design
    4/1/2010 - PDF - German - DIN
    Learn More
    €23.80

  • DIN 20367:2010-04

    Rock drilling - Round screw connections for rotary drilling equipment - Dimensions, design
    4/1/2010 - PDF - German - DIN
    Learn More
    €33.60

  • NF E56-003-3/IN1, NF EN 1804-3/IN1 (03/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3 : hydraulic control systems
    3/1/2010 - Paper - French - AFNOR
    Learn More
    €21.69

  • NF E56-003-1/IN1, NF EN 1804-1/IN1 (03/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1 : support units and general requirements
    3/1/2010 - Paper - French - AFNOR
    Learn More
    €21.69

  • NF E56-003-3, NF EN 1804-3+A1 (03/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3 : hydraulic control systems
    3/1/2010 - Paper - French - AFNOR
    Learn More
    €72.58

  • NF E56-003-1, NF EN 1804-1+A1 (03/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1 : support units and general requirements
    3/1/2010 - Paper - French - AFNOR
    Learn More
    €83.18

  • NF E56-003-3/IN1, NF EN 1804-3/IN1 (03/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3 : hydraulic control systems
    3/1/2010 - Paper - English - AFNOR
    Learn More
    €21.69

  • NF E56-003-1/IN1, NF EN 1804-1/IN1 (03/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1 : support units and general requirements
    3/1/2010 - Paper - English - AFNOR
    Learn More
    €21.69

  • NF E56-003-3, NF EN 1804-3+A1 (03/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3 : hydraulic control systems
    3/1/2010 - Paper - English - AFNOR
    Learn More
    €72.58

  • NF E56-003-1, NF EN 1804-1+A1 (03/2010)

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1 : support units and general requirements
    3/1/2010 - Paper - English - AFNOR
    Learn More
    €83.18

  • DIN 21181-1:2010-03

    Shaft sinking - Debris kibbles - Part 1: Debris kibbles with suspension hanger
    3/1/2010 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 21181-2:2010-03

    Shaft sinking - Debris kibbles - Part 2: Debris kibbles with suspension two-strand chain set
    3/1/2010 - PDF - German - DIN
    Learn More
    €68.30

  • NBN EN 1804-1+A1

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
    1/4/2010 - PDF - French - NBN
    Learn More
    €77.00

  • NBN EN 1804-2+A1

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
    1/4/2010 - PDF - French - NBN
    Learn More
    €77.00

  • NBN EN 1804-3+A1

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
    1/4/2010 - PDF - French - NBN
    Learn More
    €77.00

  • NBN EN 1804-1+A1

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
    1/4/2010 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 1804-1+A1

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
    1/4/2010 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 1804-2+A1

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
    1/4/2010 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 1804-2+A1

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
    1/4/2010 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 1804-3+A1

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
    1/4/2010 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 1804-3+A1

    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
    1/4/2010 - PDF - English - NBN
    Learn More
    €77.00

  • UNE-EN 1889-2:2004+A1:2009

    Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
    12/9/2009 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-EN 12321:2003+A1:2009

    Underground mining machinery - Specification for the safety requirements of armoured face conveyors
    11/18/2009 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • DIN 20377:2009-11

    Rock drilling - Flush drills - Drill rod profiles, shanks and tapers
    11/1/2009 - PDF - German - DIN
    Learn More
    €47.60

  • BS 7861-2:2009

    Strata reinforcement support systems components used in coal mines. Specification for flexible systems for roof reinforcement
    10/31/2009 - Paper - English - BSI
    Learn More
    €271.32

  • DIN 21603:2009-10

    Auxiliary ventilation for mining - Sheet steel ventilation ducting with collars and loose flanges
    10/1/2009 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 21613:2009-10

    Auxiliary ventilation for mining - Steel sheet connectors with flange and shoulder
    10/1/2009 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 21614:2009-10

    Auxiliary ventilation for mining - Flanged sheet steel reducers
    10/1/2009 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 21615:2009-10

    Auxiliary ventilation for mining - Sheet steel reducers with flange and shoulder
    10/1/2009 - PDF - German - DIN
    Learn More
    €33.60

  • DIN EN 12321:2009-07

    Underground mining machinery - Specification for the safety requirements of armoured face conveyors; German version EN 12321:2003+A1:2009
    7/1/2009 - PDF - German - DIN
    Learn More
    €82.60

  • DIN EN 12321:2009-07

    Underground mining machinery - Specification for the safety requirements of armoured face conveyors; German version EN 12321:2003+A1:2009
    7/1/2009 - PDF - English - DIN
    Learn More
    €103.10

  • DIN EN 1889-2:2009-07

    Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives; German version EN 1889-2:2003+A1:2009
    7/1/2009 - PDF - German - DIN
    Learn More
    €130.80

  • DIN EN 1889-2:2009-07

    Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives; German version EN 1889-2:2003+A1:2009
    7/1/2009 - PDF - English - DIN
    Learn More
    €163.50

  • NF E56-006/IN1, NF EN 12321/IN1 (06/2009)

    Underground mining machinery - Specification for the safety requirements of armoured face conveyors
    6/1/2009 - Paper - French - AFNOR
    Learn More
    €21.69

  • NF E56-006, NF EN 12321+A1 (06/2009)

    Underground mining machinery - Specification for the safety requirements of armoured face conveyors
    6/1/2009 - Paper - French - AFNOR
    Learn More
    €63.38

  • NF E56-006/IN1, NF EN 12321/IN1 (06/2009)

    Underground mining machinery - Specification for the safety requirements of armoured face conveyors
    6/1/2009 - Paper - English - AFNOR
    Learn More
    €21.69

  • NF E56-006, NF EN 12321+A1 (06/2009)

    Underground mining machinery - Specification for the safety requirements of armoured face conveyors
    6/1/2009 - Paper - English - AFNOR
    Learn More
    €63.38

  • NF E56-005-2/IN1, NF EN 1889-2/IN1 (05/2009)

    Machines for underground mines - Mobile machines working underground - Safety - Part 2 : rail locomotives
    5/1/2009 - Paper - French - AFNOR
    Learn More
    €21.69

  • NF E56-005-2, NF EN 1889-2+A1 (05/2009)

    Machines for underground mines - Mobile machines working underground - Safety - Part 2 : rail locomotives
    5/1/2009 - Paper - French - AFNOR
    Learn More
    €99.65

  • NF E56-005-2/IN1, NF EN 1889-2/IN1 (05/2009)

    Machines for underground mines - Mobile machines working underground - Safety - Part 2 : rail locomotives
    5/1/2009 - Paper - English - AFNOR
    Learn More
    €21.69

  • NF E56-005-2, NF EN 1889-2+A1 (05/2009)

    Machines for underground mines - Mobile machines working underground - Safety - Part 2 : rail locomotives
    5/1/2009 - Paper - English - AFNOR
    Learn More
    €99.65

  • NBN EN 12321+A1

    Underground mining machinery - Specification for the safety requirements of armoured face conveyors
    1/8/2009 - PDF - French - NBN
    Learn More
    €56.00

  • NBN EN 1889-2+A1

    Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
    1/8/2009 - PDF - French - NBN
    Learn More
    €77.00

  • NBN EN 12321+A1

    Underground mining machinery - Specification for the safety requirements of armoured face conveyors
    1/8/2009 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN 12321+A1

    Underground mining machinery - Specification for the safety requirements of armoured face conveyors
    1/8/2009 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN 1889-2+A1

    Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
    1/8/2009 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 1889-2+A1

    Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
    1/8/2009 - PDF - English - NBN
    Learn More
    €77.00

  • UNE-EN 1710:2006+A1:2008

    Equipment and components intended for use in potentially explosive atmospheres in underground mines
    12/22/2008 - PDF - Spanish - AENOR
    Learn More
    €60.00

Items 1 to 200 of 566 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
To top