Closure for annual leave, no order will be honored August 1 to August 19, 2019 included.

Call +33 (1) 40 02 03 05
Type de carte de crédit

55 : Packaging and distribution of goods

Items 1 to 200 of 5231 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 27
  • ASTM E1974-19

    Standard Specification for Shelter, Electrical Equipment S-250/G
    7/1/2019 - PDF - English - ASTM
    Learn More
    €49.00

  • ASTM E1974-19 + Redline

    Standard Specification for Shelter, Electrical Equipment S-250/G
    7/1/2019 - PDF - English - ASTM
    Learn More
    €59.00

  • ASTM E2463-19

    Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
    7/1/2019 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM E2463-19 + Redline

    Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
    7/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • PR NF ISO 23412, E18-200PR (06/2019)


    6/1/2019 - Paper - French - AFNOR
    Learn More
    €134.92

  • PR NF ISO 1496-3, H90-008PR (06/2019)


    6/1/2019 - Paper - French - AFNOR
    Learn More
    €112.59

  • ASTM F3326-19a

    Standard Specification for Flame Mitigation Devices on Portable Fuel Containers
    5/15/2019 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM F3326-19a + Redline

    Standard Specification for Flame Mitigation Devices on Portable Fuel Containers
    5/15/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • BS ISO 26683-3:2019


    5/14/2019 - PDF - English - BSI
    Learn More
    €236.90

  • BS ISO 1496-3:2019


    5/8/2019 - PDF - English - BSI
    Learn More
    €236.90

  • ASTM F1615-19

    Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
    5/1/2019 - PDF - English - ASTM
    Learn More
    €38.00

  • PR NF EN 16293, H35-115PR (05/2019)


    5/1/2019 - Paper - French - AFNOR
    Learn More
    €78.60

  • SAE AIR 1490C:2019-04-24

    Environmental Degradation of Textiles
    4/24/2019 - PDF - English - SAE
    Learn More
    €73.00

  • UNE-EN 12726:2019

    Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
    4/24/2019 - PDF - English - AENOR
    Learn More
    €45.60

  • UNE-EN 12726:2019

    Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
    4/24/2019 - PDF - Spanish - AENOR
    Learn More
    €38.00

  • NBN EN 16860:2019

    Railway applications - Requirements and general principles for securing payload in rail freight transport
    4/17/2019 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN 16860:2019

    Railway applications - Requirements and general principles for securing payload in rail freight transport
    4/17/2019 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN 16860:2019

    Railway applications - Requirements and general principles for securing payload in rail freight transport
    4/17/2019 - PDF - French - NBN
    Learn More
    €56.00

  • ASTM F3375-19

    Standard Test Method for Assessing Non-Metered Restricted Delivery Systems for Liquid Consumer Products
    4/15/2019 - PDF - English - ASTM
    Learn More
    €49.00

  • ASTM D4577-19

    Standard Test Method for Compression Resistance of a Container Under Constant Load
    4/1/2019 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM D4577-19 + Redline

    Standard Test Method for Compression Resistance of a Container Under Constant Load
    4/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D5276-19

    Standard Test Method for Drop Test of Loaded Containers by Free Fall
    4/1/2019 - PDF - English - ASTM
    Learn More
    €49.00

  • ASTM D5276-19 + Redline

    Standard Test Method for Drop Test of Loaded Containers by Free Fall
    4/1/2019 - PDF - English - ASTM
    Learn More
    €59.00

  • ISO 1496-3:2019

    Series 1 freight containers -- Specification and testing -- Part 3: Tank containers for liquids, gases and pressurized dry bulk
    4/1/2019 - Paper - English - ISO
    Learn More
    €123.00

  • UNE-EN IEC 60286-3:2019

    Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (Endorsed by Asociación Española de Normalización in April of 2019.)
    4/1/2019 - PDF - English - AENOR
    Learn More
    €80.00

  • PR NF H34-028, H34-028PR (04/2019)


    4/1/2019 - Paper - French - AFNOR
    Learn More
    €78.60

  • PR NF EN ISO 4180, H00-031PR (04/2019)


    4/1/2019 - Paper - French - AFNOR
    Learn More
    €95.10

  • PR NF EN IEC 60335-2-75, C73-875PR (04/2019)


    4/1/2019 - Paper - French - AFNOR
    Learn More
    €71.80

  • UNE-EN 50597:2019

    Energy Consumption of Vending Machines
    3/13/2019 - PDF - English - AENOR
    Learn More
    €70.80

  • UNE-EN 50597:2019

    Energy Consumption of Vending Machines
    3/13/2019 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • PR NF EN 415-4, H94-001-4PR (03/2019)


    3/1/2019 - Paper - French - AFNOR
    Learn More
    €134.92

  • PR NF EN 60335-2-75/A11, C73-875/A11PR (03/2019)

    Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines - Appareils électrodomestiques et analogues
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €71.80

  • NBN EN 17177:2019

    Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap
    2/27/2019 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 17177:2019

    Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap
    2/27/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 17177:2019

    Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap
    2/27/2019 - PDF - French - NBN
    Learn More
    €45.00

  • CEN/TR 13695-2:2019

    Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment
    2/16/2019 - PDF - English - NBN
    Learn More
    €56.00

  • 19/30329291 DC


    2/13/2019 - PDF - English - BSI
    Learn More
    €23.00

  • BS EN 17177:2019


    2/11/2019 - PDF - English - BSI
    Learn More
    €121.90

  • PR NF EN 17321, H90-155PR (02/2019)


    2/1/2019 - Paper - French - AFNOR
    Learn More
    €72.38

  • ASTM D8233-19

    Standard Guide for Packaging and Labeling of Consumer Resin Cannabis Products for Sale to Adult Consumers, Legally Authorized Medical Users, and Caregivers in a Business-to-Consumer Retail Environment (Retailers)
    2/1/2019 - PDF - English - ASTM
    Learn More
    €43.00

  • PR NF EN 12640, H90-210PR (02/2019)


    2/1/2019 - Paper - French - AFNOR
    Learn More
    €72.38

  • NBN EN ISO 20848-3:2019

    Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2018)
    1/30/2019 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN ISO 20848-3:2019

    Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2018)
    1/30/2019 - PDF - English - NBN
    Learn More
    €56.00

  • 19/30365577 DC


    1/23/2019 - PDF - English - BSI
    Learn More
    €23.00

  • 19/30356854 DC


    1/21/2019 - PDF - English - BSI
    Learn More
    €23.00

  • UNE 56933:2019

    Agglomerated microgranulated cork stoppers for still wines.
    1/16/2019 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • BS EN 868-9:2018


    1/9/2019 - PDF - English - BSI
    Learn More
    €121.90

  • BS EN 868-10:2018


    1/9/2019 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 868-8:2018


    1/9/2019 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN 868-5:2018


    1/7/2019 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN ISO 20848-3:2018


    1/4/2019 - PDF - English - BSI
    Learn More
    €202.40

  • ASTM Volume 15.10 - Multi-User - Single-Site Online

    Packaging; Primary Barrier Packaging; Cannabis
    The subscription ends 12 months from the day your order is processed.
    1/1/2019 - Internet - English - ASTM
    Learn More
    €806.08

  • NF EN 17177, H35-132 (01/2019)

    Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap - Emballages verre - Capsule couronne - Capsule couronne 26 mm de hauteur intermédiaire
    1/1/2019 - Paper - French - AFNOR
    Learn More
    €42.41

  • BS EN 50597:2018


    12/6/2018 - PDF - English - BSI
    Learn More
    €202.40

  • SAE AS 3100A:2018-12-05

    BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CRES AMS5731, .2500-28 UNJF-3A
    12/5/2018 - PDF - English - SAE
    Learn More
    €73.00

  • FD H13-045, H13-045 (12/2018)


    12/1/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • DIN EN 17321:2018-12

    Intermodal loading units and commercial vehicles - Transport stability of packages - Minimum requirements and tests; German and English version prEN 17321:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €68.30

  • NF EN 868-9, S98-051-9 (12/2018)

    Packaging for terminally sterilized medical devices - Part 9 : uncoated nonwoven materials of polyolefines - Requirements and test methods - Matériaux et systèmes d'emballage pour les dispositifs médicaux stérilisés au stade terminal - Partie 9 : Matériaux non tissés à base de polyoléfines, non enduits - Exigences et méthodes d'essai
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF EN 868-10, S98-051-10 (12/2018)

    Packaging for terminally sterilized medical devices - Part 10 : adhesive coated nonwoven materials of polyolefines - Requirements and test methods - Matériaux et systèmes d'emballage pour les dispositifs médicaux stérilisés au stade terminal - Partie 10 : Matériaux non tissés à base de polyoléfines enduits d'adhésif - Exigences et méthodes d'essai
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF EN 868-8, S98-051-8 (12/2018)

    Packaging for terminally sterilized medical devices - Part 8 : re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods - Matériaux et systèmes d'emballage pour les dispositifs médicaux stérilisés au stade terminal - Partie 8 : Conteneurs réutilisables de stérilisation pour stérilisateurs à la vapeur d'eau conformes à l'EN 285 - Exigences et méthodes d?essai
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF EN 868-5, S98-051-5 (12/2018)

    Packaging for terminally sterilized medical devices - Part 5 : sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods - Matériaux et systèmes d'emballage pour les dispositifs médicaux stérilisés au stade terminal - Partie 5 : Sachets et gaines thermoscellables constitués d'une face matière poreuse et d'une face film plastique - Exigences et méthodes d'essai
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €66.72

  • DIN EN 12726:2018-12

    Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules; German version EN 12726:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • DIN EN 12726:2018-12

    Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules; German version EN 12726:2018
    12/1/2018 - PDF - English - DIN
    Learn More
    €59.60

  • DIN EN 12640:2018-12

    Intermodal loadings units and commercial vehicles - Lashing points for cargo securing - Minimum requirements and testing; German and English version prEN 12640:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €61.70

  • NF EN ISO 20848-3, H34-038-3 (12/2018)

    Packaging - Plastics drums - Part 3 : plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l - Emballages - Fûts en matière plastique - Partie 3 : Systèmes de fermeture à bondes pour fûts en matière plastique d?une capacité nominale de 113,6 l à 220 l
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €76.40

  • PR NF EN 415-3, H94-001-3PR (12/2018)


    12/1/2018 - Paper - French - AFNOR
    Learn More
    €149.71

  • BS ISO 1496-2:2018


    11/27/2018 - PDF - English - BSI
    Learn More
    €282.90

  • BS ISO 21976:2018


    11/26/2018 - PDF - English - BSI
    Learn More
    €202.40

  • SAE AS 9492B:2018-11-26

    BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A
    11/26/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AS 3171A:2018-11-21

    BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS5643 (UNS S17400), .4375-20, UNJF-3A
    11/21/2018 - PDF - English - SAE
    Learn More
    €73.00

  • BS ISO 1496-5:2018


    11/19/2018 - PDF - English - BSI
    Learn More
    €236.90

  • UNE-EN 14932:2018

    Plastics - Thermoplastic stretch films for wrapping silage bales
    11/7/2018 - PDF - English - AENOR
    Learn More
    €87.60

  • UNE-EN 14932:2018

    Plastics - Thermoplastic stretch films for wrapping silage bales
    11/7/2018 - PDF - Spanish - AENOR
    Learn More
    €73.00

  • PR NF ISO 26683-3, P99-683PR (11/2018)


    11/1/2018 - Paper - French - AFNOR
    Learn More
    €121.66

  • DIN 55545-1:2018-11

    Packagings - Packagings with insulating properties - Part 1: Test method for the determination of thermal performance
    11/1/2018 - PDF - German - DIN
    Learn More
    €54.80

  • DIN EN ISO 10855-3:2018-11

    Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018); German version EN ISO 10855-3:2018
    11/1/2018 - PDF - German - DIN
    Learn More
    €96.00

  • DIN EN ISO 10855-1:2018-11

    Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018); English version EN ISO 10855-1:2018
    11/1/2018 - PDF - English - DIN
    Learn More
    €119.60

  • DIN EN ISO 10855-2:2018-11

    Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2018); German version EN ISO 10855-2:2018
    11/1/2018 - PDF - German - DIN
    Learn More
    €82.60

  • ISO 1496-5:2018

    Series 1 freight containers -- Specification and testing -- Part 5: Platform and platform-based containers
    11/1/2018 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 1496-2:2018

    Series 1 freight containers -- Specification and testing -- Part 2: Thermal containers
    11/1/2018 - Paper - English - ISO
    Learn More
    €165.00

  • DIN EN 13047:2018-11

    Packaging - Flexible conical metallic tubes - Dimensions and tolerances - German version EN 13047:2000
    11/1/2018 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 6647-4:2018-11

    Means of packaging - Cylindrical beverage containers - Part 4: Disposal pack with allowable operating pressure up to 4 bar, nominal volume up to 60 litres
    11/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 6647-1:2018-11

    Means of packaging - Cylindrical beverage containers - Part 1: Allowable operating pressure up to 3 bar, nominal volume up to 50 litres
    11/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 6647-2:2018-11

    Means of packaging - Cylindrical beverage containers - Part 2: Allowable operating pressure up to 7 bar, nominal volume up to 50 litres
    11/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 6647-3:2018-11

    Means of package - Cylindrical beverage containers - Part 3: Allowable operating pressure up to 3 bar, nominal volume greater 100 litres
    11/1/2018 - PDF - German - DIN
    Learn More
    €54.80

  • ISO 20848-3:2018

    Packaging -- Plastics drums -- Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l
    11/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 20848-3:2018

    Packaging -- Plastics drums -- Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l
    11/1/2018 - Paper - French - ISO
    Learn More
    €123.00

  • NF EN 50597, C73-597 (11/2018)


    11/1/2018 - Paper - French - AFNOR
    Learn More
    €77.83

  • NBN EN ISO 17480:2018

    Packaging - Accessible design - Ease of opening (ISO 17480:2015)
    10/30/2018 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN ISO 17480:2018

    Packaging - Accessible design - Ease of opening (ISO 17480:2015)
    10/30/2018 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN ISO 17480:2018

    Packaging - Accessible design - Ease of opening (ISO 17480:2015)
    10/30/2018 - PDF - French - NBN
    Learn More
    €77.00

  • NBN EN 12726:2018

    Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
    10/30/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 12726:2018

    Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
    10/30/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 12726:2018

    Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
    10/30/2018 - PDF - French - NBN
    Learn More
    €45.00

  • BS ISO 10106:2018

    Cork stoppers. Determination of global migration
    10/22/2018 - PDF - English - BSI
    Learn More
    €121.90

  • BS EN 12726:2018

    Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
    10/15/2018 - PDF - English - BSI
    Learn More
    €121.90

  • IEC 60335-2-75 AMD 2 (2018-10)

    IEC 60335-2-75:2012/AMD2:2018 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
    10/12/2018 - PDF - English, French - CEI
    Learn More
    €10.00

  • IEC 60335-2-75 Edition 3.2 (2018-10)

    IEC 60335-2-75:2012+AMD1:2015+AMD2:2018 consolidated version Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
    10/12/2018 - PDF - English, French - CEI
    Learn More
    €305.00

  • 18/30358930 DC


    10/2/2018 - PDF - English - BSI
    Learn More
    €41.40

  • VDI 3636:2018-10

    Planning and control systems for the planning and control of truck loading and unloading processes - Yard management
    10/1/2018 - PDF - German - VDI
    Learn More
    €103.22

  • PR NF EN ISO 16106, H00-101PR (10/2018)

    Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €144.21

  • ISO/IEC Guide 41:2018

    Packaging -- Recommendations for addressing consumer needs
    10/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • DIN EN 1230-2:2018-10

    Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint); German version EN 1230-2:2009
    10/1/2018 - PDF - German - DIN
    Learn More
    €82.60

  • DIN EN 1230-2:2018-10

    Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint); German version EN 1230-2:2009
    10/1/2018 - PDF - English - DIN
    Learn More
    €103.10

  • ASTM F17-18a

    Standard Terminology Relating to Primary Barrier Packaging
    10/1/2018 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM F17-18a + Redline

    Standard Terminology Relating to Primary Barrier Packaging
    10/1/2018 - PDF - English - ASTM
    Learn More
    €52.00

  • DIN EN 17066-1:2018-10

    Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 1: Container; German and English version prEN 17066-1:2018
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €96.00

  • DIN 15146:2018-10

    Pallets - Timber four-way-flat pallets; 800 mm × 600 mm
    10/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • ASTM D6199-18a

    Standard Practice for Quality of Wood Members of Containers and Pallets
    10/1/2018 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM D6199-18a + Redline

    Standard Practice for Quality of Wood Members of Containers and Pallets
    10/1/2018 - PDF - English - ASTM
    Learn More
    €52.00

  • NF EN 12726, H35-100 (10/2018)

    Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules - Emballage - Bague plate ayant un diamètre d'entrée de 18,5 mm pour bouchage liège et capsule témoin d'effraction
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €30.64

  • ASTM E2462-18

    Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I
    10/1/2018 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM E2462-18 + Redline

    Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I
    10/1/2018 - PDF - English - ASTM
    Learn More
    €52.00

  • DIN 6111:2018-10

    Packaging - High-pressure packages - Reusable, with non-removeable dispensing facility
    10/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • ASTM D6039/D6039M-18

    Standard Specification for Open and Covered Wood Crates
    10/1/2018 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM D6039/D6039M-18 + Redline

    Standard Specification for Open and Covered Wood Crates
    10/1/2018 - PDF - English - ASTM
    Learn More
    €75.00

  • ISO/IEC GUIDE 41 (2018-09)

    ISO/IEC GUIDE 41:2018 Packaging - Recommendations for addressing consumer needs
    9/26/2018 - PDF - English - ISO/IEC
    Learn More
    €123.00

  • 18/30364909 DC


    9/21/2018 - PDF - English - BSI
    Learn More
    €23.00

  • 18/30331610 DC


    9/4/2018 - PDF - English - BSI
    Learn More
    €23.00

  • NF EN ISO 17480, H60-250 (09/2018)

    Packaging - Accessible design - Ease of opening - Emballages - Conception accessible - Facilité d'ouverture
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €95.37

  • DIN EN ISO 16106:2018-09

    Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO/DIS 16106:2018); German and English version prEN ISO 16106:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €158.30

  • ASTM E1975-18

    Standard Specification for Shelter, Electrical, Equipment S-280/G
    9/1/2018 - PDF - English - ASTM
    Learn More
    €49.00

  • ASTM E1975-18 + Redline

    Standard Specification for Shelter, Electrical, Equipment S-280/G
    9/1/2018 - PDF - English - ASTM
    Learn More
    €59.00

  • ASTM F2638-18

    Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
    9/1/2018 - PDF - English - ASTM
    Learn More
    €49.00

  • ASTM F2638-18 + Redline

    Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
    9/1/2018 - PDF - English - ASTM
    Learn More
    €59.00

  • ISO/TR 15069:2018

    Series 1 freight containers -- Handling and securing -- Rationale for ISO 3874:2017, Annexes A to E
    9/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • DIN 46397-12:2018-09

    Spools for production of wires - Part 12: Spools with rectangular flanges, technical specifications
    9/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 46397-11:2018-09

    Spools for production of wires - Part 11: Spools with rectangular flanges, dimensions
    9/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 46397-21:2018-09

    Spools for production of wires - Part 21: Spools with conical flanges, dimensions
    9/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 46397-22:2018-09

    Spools for production of wires - Part 22: Spools with conical flanges, technical specifications
    9/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 46395:2018-09

    Machine spools
    9/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 46391-1:2018-09

    Delivery drums for cables and stranded conductors - Part 1: Delivery drums with diameter up to 2 800 mm, dimensions
    9/1/2018 - PDF - German - DIN
    Learn More
    €54.80

  • DIN EN ISO 12822:2018-09

    Glass packaging - 26 H 126 crown finish - Dimensions (ISO/DIS 12822:2018); German and English version prEN ISO 12822:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €61.70

  • DIN EN 415-3:2018-09

    Safety of packaging machines - Part 3: Form, fill and seal machines; fill and seal machines; German and English version prEN 415-3:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €242.60

  • ASTM F2795-18

    Standard Test Method for Performance of Self-Contained Soft Serve and Shake Freezers
    9/1/2018 - PDF - English - ASTM
    Learn More
    €49.00

  • ASTM F2795-18 + Redline

    Standard Test Method for Performance of Self-Contained Soft Serve and Shake Freezers
    9/1/2018 - PDF - English - ASTM
    Learn More
    €59.00

  • 18/30355952 DC


    8/20/2018 - PDF - English - BSI
    Learn More
    €23.00

  • 18/30329288 DC


    8/10/2018 - PDF - English - BSI
    Learn More
    €23.00

  • SAE AIR 1758A:2018-08-09

    Limits and Fits - International Metric Tolerance System (Stabilized: Aug 2018)
    8/9/2018 - PDF - English - SAE
    Learn More
    €73.00

  • DIN 55440-1:2018-08

    Packaging test - Compression test - Part 1: Test with a constant conveyance-speed
    8/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • ASTM D5814-18

    Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
    8/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D5814-18 + Redline

    Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
    8/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • UNE-EN ISO 10855-1:2018

    Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018) (Endorsed by Asociación Española de Normalización in August of 2018.)
    8/1/2018 - PDF - English - AENOR
    Learn More
    €78.00

  • UNE-EN ISO 10855-2:2018

    Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2018) (Endorsed by Asociación Española de Normalización in August of 2018.)
    8/1/2018 - PDF - English - AENOR
    Learn More
    €69.00

  • UNE-EN ISO 10855-3:2018

    Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018) (Endorsed by Asociación Española de Normalización in August of 2018.)
    8/1/2018 - PDF - English - AENOR
    Learn More
    €70.00

  • VDI/GS1 4488:2018-08

    Design recommendation for GS1 transport and product labels in logistics
    8/1/2018 - PDF - English, German - VDI
    Learn More
    €112.06

  • VDI 2700 Blatt 10.3:2018-08

    Securing of loads on road vehicles - Securing of precast concrete elements - Packaged concrete products
    8/1/2018 - PDF - English, German - VDI
    Learn More
    €112.06

  • VG 95629:2018-08

    Timber for boxes and crates - Generic standard; Text in German and English
    8/1/2018 - PDF - English, German - DIN
    Learn More
    €81.90

  • BS ISO 28862:2018

    Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
    7/30/2018 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 14375:2018

    Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing
    7/30/2018 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN ISO 10855-2:2018

    Offshore containers and associated lifting sets. Design, manufacture and marking of lifting sets
    7/20/2018 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN ISO 10855-1:2018

    Offshore containers and associated lifting sets. Design, manufacture and marking of offshore containers
    7/18/2018 - PDF - English - BSI
    Learn More
    €236.90

  • BS EN ISO 10855-3:2018

    Offshore containers and associated lifting sets. Periodic inspection, examination and testing
    7/17/2018 - PDF - English - BSI
    Learn More
    €202.40

  • DIN SPEC 91360:2018-07

    Temperature concept for shipping goods that require refrigeration and goods that do not require refrigeration in online food business
    7/1/2018 - PDF - German - DIN
    Learn More
    €0.00

  • ISO 28862:2018

    Packaging -- Child-resistant packaging -- Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
    7/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 14375:2018

    Child-resistant non-reclosable packaging for pharmaceutical products -- Requirements and testing
    7/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • NF EN ISO 10855-3, M87-101-3 (07/2018)

    Offshore containers and associated lifting sets - Part 3 : periodic inspection, examination and testing - Conteneurs offshore et dispositifs de levage associés - Partie 3: Inspection périodique, examen et essais
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF EN ISO 10855-1, M87-101-1 (07/2018)

    Offshore containers and associated lifting sets - Part 1 : design, manufacture and marking of offshore containers - Conteneurs offshore et dispositifs de levage associés - Partie 1: Conteneurs offshore - Conception, fabrication et marquage
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €87.56

  • NF EN ISO 10855-2, M87-101-2 (07/2018)

    Offshore containers and associated lifting sets - Part 2 : design, manufacture and marking of lifting sets - Conteneurs offshore et dispositifs de levage associés - Partie 2: Dispositifs de levage - Conception, fabrication et marquage
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €66.72

  • PR NF EN ISO 12821, H35-043PR (07/2018)

    Glass packaging - 26 H 180 crown finish - Dimensions - Emballage en verre - Bague couronne 26 H 180 - Dimensions
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €72.38

  • NF X30-507, X30-507 (07/2018)

    Packaging for medical waste - Medical waste - Cardboard box with inner bag for infectious medical waste - Emballage des déchets d'activités de soins - Caisse avec sac intérieur pour déchets d'activités de soins à risques infectieux solides ou mous
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €53.41

  • PR NF H90-209, PR NF EN 17247 (06/2018)

    Intermodal Transport Unit 45'PW
    6/15/2018 - Paper - English, French - AFNOR
    Learn More
    €112.59

  • 18/30366443 DC


    6/8/2018 - PDF - English - BSI
    Learn More
    €23.00

  • 18/30364906 DC


    6/7/2018 - PDF - English - BSI
    Learn More
    €23.00

  • DIN EN ISO 12821:2018-06

    Glass packaging - 26 H 180 crown finish - Dimensions; German and English version prEN ISO 12821:2018
    6/1/2018 - PDF - English, German - DIN
    Learn More
    €61.70

  • ASTM D3951-18

    Standard Practice for Commercial Packaging
    5/1/2018 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM D3951-18 + Redline

    Standard Practice for Commercial Packaging
    5/1/2018 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D4334-18

    Standard Practice for Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D4334-18 + Redline

    Standard Practice for Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D4335-18

    Standard Practice for Determination of Component Retention of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D4335-18 + Redline

    Standard Practice for Determination of Component Retention of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • DIN EN 17247:2018-05

    Intermodal Transport Unit 45'PW; German and English version prEN 17247:2018
    5/1/2018 - PDF - English, German - DIN
    Learn More
    €103.00

  • DIN 46391-4:2018-05

    Delivery drums for cables and ropes - Part 4: Technical terms of delivery for steel drums
    5/1/2018 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 46391-3:2018-05

    Delivery drums for cables and ropes - Part 3: Drums with diameter of flange of more than 2 800 mm - Dimensions
    5/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 46391-2:2018-05

    Delivery drums for cables and ropes - Part 2: Technical terms of delivery for wooden drums
    5/1/2018 - PDF - German - DIN
    Learn More
    €54.80

  • UNE-EN IEC 61340-4-4:2018

    Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) (Endorsed by Asociación Española de Normalización in May of 2018.)
    5/1/2018 - PDF - English - AENOR
    Learn More
    €87.00

  • ASTM D6654-18

    Standard Practice for Basic Storage Stability of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D6654-18 + Redline

    Standard Practice for Basic Storage Stability of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D4333/D4333M-18

    Standard Practice for Compatibility of Mechanical Pump Dispenser Components
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D4333/D4333M-18 + Redline

    Standard Practice for Compatibility of Mechanical Pump Dispenser Components
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D4336-18

    Standard Practice for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D4336-18 + Redline

    Standard Practice for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D3890-18

    Standard Practice for Number of Strokes to Prime a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D3890-18 + Redline

    Standard Practice for Number of Strokes to Prime a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D3094-18

    Standard Practice for Seepage Rate of Aerosol Products
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D3094-18 + Redline

    Standard Practice for Seepage Rate of Aerosol Products
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D3070-18

    Standard Practice for Rapid Pressure Determination of Pressurized Products
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D3070-18 + Redline

    Standard Practice for Rapid Pressure Determination of Pressurized Products
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D3076-18

    Standard Practice for Effective Crimping on Outside Crimped Valves of Aerosol Containers
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D3076-18 + Redline

    Standard Practice for Effective Crimping on Outside Crimped Valves of Aerosol Containers
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D6534-18

    Standard Practice for Determining the Peak Force-to-Actuate of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D6534-18 + Redline

    Standard Practice for Determining the Peak Force-to-Actuate of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D6535/D6535M-18

    Standard Practice for Determining the Dip Tube Length of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D6535/D6535M-18 + Redline

    Standard Practice for Determining the Dip Tube Length of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D6536/D6536M-18

    Standard Practice for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D6536/D6536M-18 + Redline

    Standard Practice for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D6633-18

    Standard Practice for Basic Functional Stability of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D6633-18 + Redline

    Standard Practice for Basic Functional Stability of a Mechanical Pump Dispenser
    5/1/2018 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D2658-18

    Standard Test Method for Determining Dimensions of Fiberboard Boxes
    5/1/2018 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM D2658-18 + Redline

    Standard Test Method for Determining Dimensions of Fiberboard Boxes
    5/1/2018 - PDF - English - ASTM
    Learn More
    €52.00

Items 1 to 200 of 5231 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 27