Call +33 (1) 40 02 03 05

49.025.99 : Other materials

Items 1 to 200 of 997 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • 17/30354462 DC


    6/14/2019 - PDF - English - BSI
    Learn More
    €23.00

  • SAE AS 6450B:2019-05-20

    Lubricant Application, Solid Film, Heat Cured, Potable Water, Hydraulic, and Other Fluid Systems (Stabilized: May 2019)
    5/20/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4431:2019-05-14

    Magnesium Alloy, Direct Chill Strand Cast, 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6), Solution and Precipitation Heat Treated
    5/14/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4534D:2019-05-14

    Copper-Beryllium Alloy, Bars and Rods, 98Cu - 1.9Be, Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)
    5/14/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5376H:2019-05-14

    Alloy, Corrosion and Heat Resistant, Investment Castings, 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N, As Cast
    5/14/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2261L:2019-05-10

    Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire
    5/10/2019 - PDF - English - SAE
    Learn More
    €73.00

  • UNE-EN 2952:2019

    Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D <= 50 mm - 1 270 MPa <= Rm <= 1 550 MPa (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €38.00

  • UNE-EN 3220:2019

    Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm <= D <= 30 mm (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €38.00

  • SAE AMS 2360E:2019-04-15

    Room Temperature Tensile Properties of Castings
    4/15/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2361E:2019-04-15

    Elevated Temperature Tensile Properties of Castings
    4/15/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2362D:2019-04-15

    Stress-Rupture Properties of Castings
    4/15/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4650N:2019-04-11

    Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings 98Cu - 1.9Be Solution Heat Treated TB00 (A)
    4/11/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4533E:2019-04-11

    Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
    4/11/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5598F:2019-04-11

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable
    4/11/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5542P:2019-04-11

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Annealed
    4/11/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5668K:2019-04-11

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 7.0Fe - 2.5Ti - 1.0Cb (Nb) - 0.70Al 2100 °F (1149 °C) Solution and Precipitation Heat Treated
    4/11/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5754N:2019-04-11

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated
    4/11/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5536P:2019-04-08

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated
    4/8/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2372H:2019-04-05

    Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings
    4/5/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5966C:2019-03-26

    Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45AI Consumable Electrode or Vacuum Induction Melted
    3/26/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 3044G:2019-03-06

    Magnetic Particles, Fluorescent Wet Method, Dry Powder
    3/6/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 3045F:2019-03-06

    Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Ready-to-Use
    3/6/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 3046G:2019-02-21

    Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Aerosol Packaged
    2/21/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AS 4792B:2019-02-18

    Water Conditioning Agents for Aqueous Magnetic Particle Inspection
    2/18/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5382K:2019-02-07

    Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings 54Co - 25.5Cr - 10.5Ni - 7.5W As-Cast
    2/7/2019 - PDF - English - SAE
    Learn More
    €73.00

  • UNE-EN 2600:2018

    Aerospace series - Designation of metallic semi-finished products - Rules (Endorsed by Asociación Española de Normalización in February of 2019.)
    2/1/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • SAE AMS 5582G:2019-01-18

    Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable to 155 ksi (1069 MPa) Tensile Strength
    1/18/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5583F:2019-01-16

    Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe Vacuum Melted Solution Heat Treated, Precipitation Hardenable to 170 ksi (1172 MPa) Tensile Strength
    1/16/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5221F:2019-01-10

    Iron-Nickel Alloy Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated
    1/10/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5223G:2019-01-10

    Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10% Reduction
    1/10/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5555F:2019-01-07

    Nickel Wire and Ribbon 99Ni
    1/7/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4778L:2019-01-04

    Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range
    1/4/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2431/8C:2019-01-04

    Peening Media Conditioned Carbon Steel Cut Wire Shot, High Hardness (55 to 62 HRC) (AWCH)
    1/4/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4442H:2019-01-04

    Magnesium Alloy, Sand Castings 3.2 Rare Earths - 2.5Zn - 0.70Zr (EZ33A-T5) Precipitation Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4452F:2019-01-04

    Magnesium Alloy, Investment Castings 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6) Solution and Precipitation Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4453G:2019-01-04

    Magnesium Alloy, Investment Castings 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4455H:2019-01-04

    Magnesium Alloy, Investment Castings 10Al (AM100A-T6) Solution and Precipitation Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5607F:2019-01-04

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 73Ni - 7.0Cr - 16.5Mo Solution Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5586H:2019-01-04

    Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr Consumable Electrode Remelted or Vacuum Induction Melted, Annealed
    1/4/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5708M:2019-01-04

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5870F:2019-01-04

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 60.5Ni - 23Cr - 14Fe - 0.35Ti - 1.4Al Solution Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7908E:2018-12-28

    Beryllium Near-Net Preforms Standard Grade Hot Isostatic Pressed
    12/28/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4418J:2018-12-27

    Magnesium Alloy, Sand Castings 2.5Ag - 2.1Di - 0.70Zr (QE22A-T6) Solution and Precipitation Heat Treated
    12/27/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4439H:2018-12-27

    Magnesium Alloy, Sand Castings 4.2Zn - 1.2 Rare Earths - 0.7Zr (ZE41A-T5) Precipitation Heat Treated
    12/27/2018 - PDF - English - SAE
    Learn More
    €73.00

  • DIN EN 2952:2018-12

    Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D <= 50 mm - 1270 MPa <= Rm <= 1550 MPa; German and English version FprEN 2952:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 3220:2018-12

    Aerospace series - Heat resisting nickel base alloy (Ni-P101 HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm <= D <= 30 mm; German and English version FprEN 3220:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2957:2018-12

    Aerospace series - Method of preparation of forged samples; German and English version FprEN 2957:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 3219:2018-12

    Aerospace series - Heat resisting nickel base alloy (Ni-P100HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm <= D <= 30 mm; German and English version FprEN 3219:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • SAE AMS 4446D:2018-11-14

    Magnesium Alloy, Sand Castings 8.7Al - 0.70Zn - 0.26Mn (AZ91E-T6) Solution and Precipitation Heat Treated
    11/14/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AS 5127C:2018-11-14

    Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens
    11/14/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4780G:2018-11-05

    Manganese Alloy, Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range
    11/5/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 1435D:2018-11-02

    Liquid Runway Deicing/Anti-Icing Product
    11/2/2018 - PDF - English - SAE
    Learn More
    €73.00

  • ASTM E1560-18

    Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
    11/1/2018 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM E1560-18 + Redline

    Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
    11/1/2018 - PDF - English - ASTM
    Learn More
    €52.00

  • SAE AMS 1428K:2018-10-24

    Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV
    10/24/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 1431E:2018-10-24

    Solid Runway Deicing/Anti-Icing Product
    10/24/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2759/9E:2018-10-18

    Hydrogen Embrittlement Relief (Baking) of Steel Parts
    10/18/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 1451C:2018-10-16

    Disinfectant, Aircraft For Use in Cargo Compartments
    10/16/2018 - PDF - English - SAE
    Learn More
    €73.00

  • DIN 65124:2018-10

    Aerospace series - Technical specifications for additive manufacturing of metallic materials with the powder bed process
    10/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • SAE AMS 1450B:2018-09-28

    Disinfectant (Insecticide), Aircraft
    9/28/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 1424P:2018-09-26

    Fluid, Aircraft Deicing/Anti-Icing, SAE Type I
    9/26/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AIR 4938C:2018-09-19

    Composite and Bonded Structure Technician/Specialist Training Document
    9/19/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5545G:2018-09-07

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 54Ni – 19Cr – 11Co – 9.8Mo – 3.2Ti – 1.5Al – 0.006B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable
    9/7/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4842F:2018-09-07

    Castings, Leaded Bronze, Sand and Centrifugal 80Cu - 10Sn - 9.5Pb As Cast
    9/7/2018 - PDF - English - SAE
    Learn More
    €73.00

  • ASD-STAN prEN 4866 (09/04/2018)

    Aerospace series - Definitions of imperfections and defects in organic matrix composite materials
    9/4/2018 - PDF - English - ASD-STAN
    Learn More
    €200.00

  • SAE AMS 3041F:2018-08-31

    Magnetic Particles, Nonfluorescent Wet Method, Oil Vehicle, Ready-to-Use
    8/31/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 3042F:2018-08-31

    Magnetic Particles, Nonfluorescent Wet Method, Dry Powder
    8/31/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 3043E:2018-08-31

    Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Aerosol Packaged
    8/31/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4775K:2018-08-28

    Nickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 °F (977 °C) Solidus to 1970 °F (1077 °C) Liquidus
    8/28/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4776J:2018-08-28

    Nickel Alloy, Brazing Filler Metal 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790 °F (977 °C) Solidus to 1970 °F (1077 °C) Liquidus Range
    8/28/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4777J:2018-08-28

    Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 °F (971 °C) Solidus to 1830 °F (999 °C) Liquidus Range
    8/28/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE J 2609:2018-08-24

    Multi-Dimensional Thermal Properties of Insulated Heat Shield Material Systems (Stabilized: Aug 2018)
    8/24/2018 - PDF - English - SAE
    Learn More
    €73.00

  • PR NF L11-007, PR NF EN 2400 (08/2018)

    Aerospace series - Heat resisting nickel base alloy Ni-P96-HT - Cold drawn and precipitation treated - Wires D < or = 10 mm
    8/20/2018 - Paper - French - AFNOR
    Learn More
    €43.95

  • SAE AMS 5670G:2018-08-17

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation-Hardenable
    8/17/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5661G:2018-08-17

    Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consumable Electrode or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated
    8/17/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5383F:2018-08-16

    Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.60Al - 18Fe Vacuum Melted Homogenization and Solution Heat Treated
    8/16/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4674H:2018-08-16

    Nickel - Copper Alloy, Corrosion-Resistant, Bars and Forgings 67Ni - 30Cu - 0.04S Free Machining
    8/16/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7819E:2018-08-14

    Molybdenum Alloy Bars 0.48Ti - 0.09Zr - 0.02C Arc Cast, Stress Relieved
    8/14/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5875D:2018-08-08

    Cobalt Alloy, Corrosion and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Rolled, and Aged Vacuum Induction Plus Vacuum Consumable Electrode Melted
    8/8/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5919B:2018-08-08

    Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Round Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened, Modified Strength
    8/8/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5920B:2018-08-08

    Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Round Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work-Strengthened and Aged, Modified Strength
    8/8/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2632B:2018-08-08

    Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
    8/8/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2630D:2018-08-08

    Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick
    8/8/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5838F:2018-08-03

    Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 65Ni - 16Cr - 15Mo - 0.30Al - 0.06La
    8/3/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5796F:2018-07-25

    Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 52Co - 20Cr - 10Ni -15W
    7/25/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5552H:2018-07-18

    Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 46Fe – 20.5Cr – 32Ni – 1.1Ti Annealed (Stabilized: Jul 2018)
    7/18/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5788G:2018-06-15

    Cobalt Alloy, Corrosion and Heat-Resistant, Hard Facing Rods and Wire 62Co - 29Cr - 4.5W - 1.2C
    6/15/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AS 33731A:2018-05-20

    STRIP, MOUNTING, NUT INSULATING, FOR AS27212 TERMINAL BOARD
    5/20/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5402D:2018-05-16

    Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) As Cast
    5/16/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS-DTL-22499/3B:2018-05-16

    Shim Stock, Laminated, Cres (Stabilized: May 2018)
    5/16/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 3052A:2018-05-16

    Grease, Aircraft, General Purpose, Low Temperature Range, Lithium Thickened
    5/16/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS-DTL-22499B:2018-05-07

    Shim Stock, Laminated (Stabilized: May 2018)
    5/7/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4616G:2018-04-28

    Silicon Bronze Bars, Rods, Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved
    4/28/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 1539A:2018-04-24

    Cleaning Compound, Terpene Circuit Board Cleaner (Stabilized: Apr 2018)
    4/24/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 3085B:2018-04-19

    Fluid, Reference for Testing AS5780 HPC Class (Polyol) Resistant Material (Also known as Eastman Reference Oil 300)
    4/19/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5876E:2018-03-23

    Cobalt Alloy, Corrosion and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Vacuum Induction Plus Consumable Electrode Remelted Solution Heat Treated and Cold Rolled
    3/23/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4633B:2018-03-20

    Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50)
    3/20/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7731D:2018-03-14

    Gold Wire and Ribbon 99.97Au Annealed
    3/14/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4417C:2018-03-04

    Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A - T6) Solution and Precipitation Heat Treated
    3/4/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5703E:2018-03-04

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution, Stabilization, and Precipitation Heat Treated
    3/4/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7735E:2018-03-04

    Alloy Wire, Round 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 0.85Zn Solution Heat Treated
    3/4/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AS 5780D:2018-03-04

    Specification for Aero and Aero-Derived Gas Turbine Engine Lubricants
    3/4/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE J 470:2018-02-15

    Wrought Nickel and Nickel-Related Alloys (Stabilized: Feb 2018)
    2/15/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5714E:2018-02-12

    Alloy Bars, Forgings, and Rings, Corrosion and Heat-Resistant 73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0Fe Precipitation-Hardenable
    2/12/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5702E:2018-02-12

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1750 °F (954 °C) Solution Heat Treated
    2/12/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5768L:2018-02-12

    Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe Solution and Precipitation Heat Treated
    2/12/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7721D:2018-02-07

    Lead Alloy Sheet and Extrusions 93Pb - 6.5Sb - 0.50Sn As Fabricated (Stabilized: Feb 2018)
    2/7/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4779K:2018-02-06

    Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus, 1950 °F (1066 °C) Liquidus
    2/6/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE J 466:2018-01-09

    Magnesium Wrought Alloys (Stabilized: Jan 2018)
    1/9/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5604J:2018-01-03

    Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation Hardenable
    1/3/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2487B:2018-01-02

    Anodic Treatment of Titanium and Titanium Alloys Solution pH 12.4 Maximum
    1/2/2018 - PDF - English - SAE
    Learn More
    €73.00

  • DIN EN 3094:2018-01

    Aerospace series - Sealants - Test method - determination of the application time; German and English version EN 3094:2017
    1/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • SAE J 464:2017-12-20

    Magnesium Alloys (Stabilized: Dec 2017)
    12/20/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2451/4D:2017-12-11

    Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
    12/11/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5537J:2017-12-07

    Cobalt Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 52Co - 20Cr - 10Ni - 15W Solution Heat Treated
    12/7/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4434N:2017-12-07

    Magnesium Alloy Castings, Sand 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated
    12/7/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5814C:2017-12-05

    Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 52Co - 20Cr - 20Ni - 7.5Ta Vacuum Melted
    12/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2269F:2017-12-05

    Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys
    12/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5829E:2017-12-05

    Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 56Ni - 19.5Cr - 16.5Co - 2.5Ti - 1.5Al Vacuum Induction Melted
    12/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5746F:2017-12-05

    Alloy, Corrosion and Heat-Resistant, Bars and Forgings 15Cr - 45Ni - 4.1Mo - 4.1W - 3.0Ti - 1.0Al - 31Fe (D979) Consumable Electrode Vacuum Melted Solution and Precipitation Heat Treated
    12/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • UNE-EN 3094:2017

    Aerospace series - Sealants - Test method - determination of the application time (Endorsed by Asociación Española de Normalización in December of 2017.)
    12/1/2017 - PDF - English - AENOR
    Learn More
    €30.00

  • NBN EN 3094:2017

    Aerospace series - Sealants - Test method - Determination of the application time
    11/22/2017 - PDF - German - NBN
    Learn More
    €30.00

  • NBN EN 3094:2017

    Aerospace series - Sealants - Test method - Determination of the application time
    11/22/2017 - PDF - English - NBN
    Learn More
    €30.00

  • NBN EN 3094:2017

    Aerospace series - Sealants - Test method - Determination of the application time
    11/22/2017 - PDF - French - NBN
    Learn More
    €30.00

  • SAE AMS 4612K:2017-11-15

    Brass, Naval, Bars and Rods 60.5Cu - 38.5Zn - 0.75Sn Hard Temper (H04)
    11/15/2017 - PDF - English - SAE
    Learn More
    €73.00

  • BS EN 3094:2017

    Aerospace series. Sealants. Test method. determination of the application time
    11/8/2017 - PDF - English - BSI
    Learn More
    €121.90

  • SAE AMS 2222K:2017-11-03

    Tolerances Copper and Copper Alloy Sheet, Strip, and Plate
    11/3/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AIR 5919B:2017-10-30

    Alternatives to Cadmium Plating
    10/30/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4350N:2017-10-25

    Magnesium Alloy, Extrusions 6.5A1 - 0.95Zn (AZ61A-F) As Extruded
    10/25/2017 - PDF - English - SAE
    Learn More
    €73.00

  • NF L17-036, NF EN 3094 (10/2017)

    Aerospace series - Sealants - Test method - determination of the application time
    10/18/2017 - Paper - French - AFNOR
    Learn More
    €42.41

  • SAE AMS 2804D:2017-10-12

    Identification Castings
    10/12/2017 - PDF - English - SAE
    Learn More
    €73.00

  • BS 3L 500:2011+A1:2017

    Procedure for inspection, testing and acceptance of wrought magnesium base alloys
    9/28/2017 - PDF - English - BSI
    Learn More
    €282.90

  • SAE AMS 2223H:2017-09-25

    Tolerances Copper and Copper Alloy Seamless Tubing
    9/25/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2221G:2017-09-25

    Tolerances Copper and Copper Alloy Bars and Rods
    9/25/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2224G:2017-09-25

    Tolerances Copper and Copper Alloy Wire
    9/25/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2685F:2017-09-22

    Welding, Tungsten Arc, Inert Gas (GTAW Method) (Stabilized: Sep 2017)
    9/22/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS-M-7866B:2017-09-22

    Molybdenum Disulfide, Technical, Lubrication Grade (Stabilized: Sep 2017)
    9/22/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4870F:2017-09-21

    Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe As Cast
    9/21/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4614H:2017-09-21

    Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)
    9/21/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4602D:2017-09-21

    Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (HO4)
    9/21/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS-M-45202B:2017-09-20

    Magnesium Alloys, Anodic Treatment of (Stabilized: Sep 2017)
    9/20/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2690D:2017-09-19

    Parallel Gap Welding Microelectronic Interconnections to Thin Film Substrates (Stabilized: Sep 2017)
    9/19/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4892D:2017-09-05

    Alloy Castings, Corrosion and Heat-Resistant 66Ni - 29Cu - 4.0Si As Cast
    9/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4558H:2017-08-30

    Brass, Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58)
    8/30/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4893D:2017-08-25

    Alloy Castings, Corrosion and Heat-Resistant 66Ni - 29Cu - 4.0Si Solution Treated
    8/25/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4553D:2017-08-17

    Brass, Seamless, Tubing 85Cu - 15Zn Annealed (O61)
    8/17/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4712G:2017-08-14

    Copper Alloy, Wire 65Cu - 35Zn Annealed (O61)
    8/14/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE ARP 4926B:2017-08-14

    Alloy Verification and Chemical Composition Inspection of Welding Wire
    8/14/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5540P:2017-08-10

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe Annealed
    8/10/2017 - PDF - English - SAE
    Learn More
    €73.00

  • DIN 65123:2017-08

    Aerospace Series - Methods for inspection of metallic components, produced with additive powderbed fusion processes
    8/1/2017 - PDF - German - DIN
    Learn More
    €82.60

  • SAE AS 6449C:2017-07-11

    Solid Film Lubricant
    7/11/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2375E:2017-07-10

    Control of Forgings Requiring First Article Approval
    7/10/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7510/1C:2017-07-07

    Magnets, Rare-Earth/Cobalt, Permanent Samarium-Cobalt, 33/67 - 15 (119) 250 (Stabilized: Jul 2017)
    7/7/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7875F:2017-06-29

    Powder, Chromium Carbide Plus Nickel-Chromium Alloy 75Cr3C2 + 25 (80Ni - 20Cr Alloy)
    6/29/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4375M:2017-06-28

    Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-O) Annealed and Recrystallized
    6/28/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AIR 4844C:2017-06-20

    Composites and Metal Bonding Glossary
    6/20/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5707N:2017-06-13

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated
    6/13/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5410C:2017-06-13

    Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 61Ni - 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.85Cb (Nb) - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.05Zr Vacuum Melted, Vacuum Cast As Cast, or Solution Treated, or Solution and Precipitation Hardened
    6/13/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4352J:2017-06-09

    Magnesium Alloy, Extrusions, 5.5Zn - 0.45Zr (ZK60A - T5), Precipitation Heat Treated
    6/9/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7510/2C:2017-06-01

    Magnets, Rare-Earth/Cobalt, Permanent Samarium-Cobalt, 33/67 - 18 (143) 250 (Stabilized: Jun 2017)
    6/1/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7510C:2017-05-31

    Magnets, Rare-Earth/Cobalt, Permanent Powder-Metallurgy Product (Stabilized: May 2017)
    5/31/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4490K:2017-05-30

    Magnesium Alloy Castings, Die 9.0Al - 0.70Zn (AZ91D, Temper F) As Cast
    5/30/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4631F:2017-05-25

    Aluminum Bronze Rods, Bars, and Forgings 90.5Cu - 7.5Al - 1.95: Stress Relieved (Stabilized: May 2017)
    5/25/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4420P:2017-05-25

    Magnesium Alloy Castings, Sand 6Al - 3Zn (AZ63A-F) As Cast (Stabilized: May 2017)
    5/25/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4425D:2017-05-25

    Magnesium Alloy Castings, Sand 5.8Zn - 2.5RE - 0.70Zr (ZE63-T6) Solution and Precipitation Heat Treated (Stabilized: May 2017)
    5/25/2017 - PDF - English - SAE
    Learn More
    €73.00

  • PR NF L12-140, PR NF EN 2366 (05/2017)

    Aerospace series - Sheets and strips - Heat resisting alloys - Cold rolled - Thickness a = 3 mm - Dimensions
    5/19/2017 - Paper - French - AFNOR
    Learn More
    €34.76

  • SAE AMS 4444E:2017-05-19

    Magnesium Alloy Castings, Sand 6.0Zn - 0.80Zr (ZK61A-T5) Precipitation Heat Treated (Stabilized: May 2017)
    5/19/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AIR 6211A:2017-05-08

    Ice Penetration Test Method for Runways and Taxiways Deicing/Anti-Icing Chemicals
    5/8/2017 - PDF - English - SAE
    Learn More
    €73.00

  • ASTM D2532-17

    Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
    5/1/2017 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM D2532-17 + Redline

    Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
    5/1/2017 - PDF - English - ASTM
    Learn More
    €52.00

  • SAE AMS 7850E:2017-04-25

    Columbium (Niobium) Sheet, Strip, and Foil
    4/25/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5530H:2017-04-20

    Alloy Sheet, Strip, and Plate, Corrosion and Heat Resistant 58Ni - 15.5Cr - 16Mo - 3.8W - 5.5Fe Solution Heat Treated (Stabilized: Apr 2017)
    4/20/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4751D:2017-04-20

    Tin - Lead Eutectic 63Sn - 37Pb (Stabilized: Apr 2017)
    4/20/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5389D:2017-04-18

    Alloy Castings, Sand, Corrosion and Heat Resistant 55Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V Solution Heat Treated (Stabilized: Apr 2017)
    4/18/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 1551A:2017-04-18

    Cleaner, Turbine Engine Gas Path Aqueous Type
    4/18/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4750E:2017-04-07

    Solder, Tin-Lead 45Sn - 55Pb (Stabilized: Apr 2017)
    4/7/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7724D:2017-04-06

    Alloy Sheet and Strip, Sintered Wire Mesh, Corrosion and Heat Resistant, 30Fe - 1.5Mn - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb + Ta) - 0.15N, Porous (Stabilized: Apr 2017)
    4/6/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5751F:2017-04-06

    Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant, 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B, Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted (Stabilized: Apr 2017)
    4/6/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5373E:2017-04-06

    Alloy Castings, Sand, Corrosion and Heat Resistant 16Co - 29Cr - 4.5W As Cast (Stabilized: Apr 2017)
    4/6/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5750D:2017-04-05

    Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 16Mo - 3.8W - 5.5Fe Solution Heat Treated (Stabilized: Apr 2017)
    4/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5795G:2017-04-04

    Iron Alloy, Corrosion and Heat Resistant, Covered, Welding Electrodes, 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb + Ta) (Stabilized: Apr 2017)
    4/4/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5384F:2017-04-04

    Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat Treated (Stabilized: Apr 2017)
    4/4/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5644E:2017-04-04

    Steel, Bars and Forgings, Corrosion Resistant 17Cr - 7Ni - 1Al (Stabilized: Apr 2017)
    4/4/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4387F:2017-04-04

    Magnesium Alloy Extrusions 2.3Zn - 0.62Zr (ZK21A-F) As Extruded (Stabilized: Apr 2017)
    4/4/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5683G:2017-04-03

    Alloy Welding Wire, Corrosion and Heat Resistant 75Ni - 15.5Cr - 8.0Fe (Stabilized: Apr 2017)
    4/3/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5550F:2017-04-03

    Alloy Sheet, Strip, and Plate, Corrosion and Heat Resistant 80Ni - 15.5Cr - 0.62Ti - 3.25Al Annealed (Stabilized: Apr 2017)
    4/3/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2808E:2017-03-28

    Identification Forgings (Stabilized: Mar 2017)
    3/28/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4782G:2017-03-28

    Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 °F (1080 °C) Solidus, 2075 °F (1135 °C) Liquidus
    3/28/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AIR 6172A:2017-03-15

    Ice Undercutting Test Method for Runways and Taxiways Deicing/Anti-Icing Chemicals
    3/15/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AIR 6170A:2017-02-21

    Ice Melting Test Method for Runways and Taxiways Deicing/Anti-icing Chemicals
    2/21/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4575F:2017-02-09

    Nickel-Copper Alloy Tubing, Brazed, Corrosion Resistant 67 Ni - 31Cu Annealed (Stabilized: Feb 2017)
    2/9/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7855D:2017-01-12

    Columbium (Niobium) Alloy Bars, Rods, and Wire 10W - 2.5Zr Recrystallized
    1/12/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7851D:2017-01-11

    Columbium (Niobium) Alloy Foil, Sheet, Strip, and Plate 10W - 2.5Zr Recrystallized
    1/11/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7852C:2017-01-11

    Columbium (Niobium) Alloy Sheet, Strip, and Plate, 10Hf - 1.0Ti
    1/11/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 7857C:2017-01-11

    Columbium (Niobium) Alloy Bars, Rods, and Extrusions 10Hf - 1.0Ti, Recrystallization Annealed
    1/11/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4574F:2017-01-04

    Nickel-Copper Alloy, Corrosion Resistant, Tubing, Seamless 67Ni - 31Cu Annealed
    1/4/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4675E:2017-01-04

    Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 67Ni - 30Cu
    1/4/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4676F:2017-01-04

    Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 66.5Ni - 3.0Al - 0.62Ti - 28Cu Hot-Finished, Precipitation Hardenable
    1/4/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4677C:2017-01-04

    Nickel-Copper Alloy, Corrosion Resistant, Bars and Forgings 66.5Ni - 2.9Al - 30Cu Annealed
    1/4/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4730H:2017-01-03

    Nickel-Copper Alloy Wire, Corrosion-Resistant 67Ni - 31Cu Annealed (400)
    1/3/2017 - PDF - English - SAE
    Learn More
    €73.00

Items 1 to 200 of 997 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5