Call +33 (1) 40 02 03 05

49.025.15 : Non-ferrous alloys in general

Items 1 to 200 of 746 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • ASD STAN prEN 4700-002:2019

    Aerospace series-Steel and heat resisting alloys Wrought products - Technical specification Part 002: Bars and sections
    1/31/2019 - PDF - English - ASD-STAN
    Learn More
    €154.50

  • SAE AMS 5541H:2019-01-07

    Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 73Ni - 15.5Cr - 2.4Ti - 0.7Al - 7.0Fe Annealed
    1/7/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5605G:2019-01-07

    Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated
    1/7/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5960A:2019-01-07

    Nickel Alloy, Corrosion and Heat Resistant Sheet, Strip, and Foil Ni - 18Cr - 2.8Mo - 5.5Cb (Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Vacuum Induction Melted and Consumable Electrode Remelted Solution Heat Treated
    1/7/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5872F:2019-01-04

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 48Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €73.00

  • DIN EN 2959:2018-12

    Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners - 3 mm <= D <= 30 mm; German and English version FprEN 2959:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 3018:2018-12

    Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D <= 3 mm; German and English version FprEN 3018:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2400:2018-11

    Aerospace series - Heat resisting nickel base alloy Ni-P96-HT - Cold drawn and precipitation treated - Wires D <= 10 mm; German and English version FprEN 2400:2018
    11/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • DIN EN 4842:2018-10

    Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D <= 250 mm - 1070 MPa <= Rm <= 1200 MPa - Premium quality (pq); German and English version FprEN 4842:2018
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • PR NF L12-030, PR NF EN 2369 (08/2018)

    Aerospace series - Wires, heat resisting alloys - Diameter 0,2 mm < or = D < or = 8 mm - Dimensions
    8/25/2018 - Paper - French - AFNOR
    Learn More
    €43.95

  • SAE AMS 5801G:2018-08-06

    Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 39Co - 22Cr - 22Ni - 14.5W - 0.07La
    8/6/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5800G:2018-08-03

    Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 54Ni - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction Melted
    8/3/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5590G:2018-07-25

    Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
    7/25/2018 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5747E:2018-06-27

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable
    6/27/2018 - PDF - English - SAE
    Learn More
    €73.00

  • ASD-STAN prEN 3844-2 (04/11/2018)

    Aerospace series - Flammability of non-metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation
    4/11/2018 - PDF - English - ASD-STAN
    Learn More
    €71.25

  • ASD-STAN prEN 3844-3 (04/11/2018)

    Aerospace series - Flammability of non-metallic materials - Part 3: Small burner test, 45° - Determination of the resistance of material to flame and glow propagation and to flame penetration
    4/11/2018 - PDF - English - ASD-STAN
    Learn More
    €64.00

  • ASD-STAN prEN 3844-1 (10/04/2018)

    Aerospace series - Flammability of non-metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation
    4/10/2018 - PDF - English - ASD-STAN
    Learn More
    €76.00

  • NF L43-152, NF EN 4802 (02/2018)

    Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in nickel alloy - Inch series
    2/28/2018 - Paper - English, French - AFNOR
    Learn More
    €42.41

  • BS EN 6018:2017

    Aerospace series. Test methods for metallic materials. Determination of density according to displacement method
    2/6/2018 - PDF - English - BSI
    Learn More
    €121.90

  • NF L43-156, NF EN 4806 (01/2018)

    Aerospace series - Flange couplings - Weld coupling, straight, in nickel alloy - Inch series
    1/20/2018 - Paper - English, French - AFNOR
    Learn More
    €42.41

  • NF L43-154, NF EN 4804 (01/2018)

    Aerospace series - Flange couplings - Swivel flange with 4 fastening holes, in nickel alloy - Inch series
    1/6/2018 - Paper - English, French - AFNOR
    Learn More
    €42.41

  • NF L43-160, NF EN 4810 (01/2018)

    Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes - Inch series
    1/6/2018 - Paper - English, French - AFNOR
    Learn More
    €42.41

  • DIN EN 2306:2018-01

    Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars; German and English version EN 2306:2017
    1/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • NF L43-162, NF EN 4812 (12/2017)

    Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes - Inch series
    12/29/2017 - Paper - English, French - AFNOR
    Learn More
    €42.41

  • NBN EN 6018:2017

    Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
    12/21/2017 - PDF - German - NBN
    Learn More
    €30.00

  • NBN EN 6018:2017

    Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
    12/21/2017 - PDF - English - NBN
    Learn More
    €30.00

  • NBN EN 6018:2017

    Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
    12/21/2017 - PDF - French - NBN
    Learn More
    €30.00

  • SAE AMS 5676F:2017-12-05

    Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 80Ni - 20Cr
    12/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5918:2017-12-05

    Cobalt Alloy, Corrosion and Heat Resistant, Bars 62Co-28Cr-6Mo Warm-Worked
    12/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • UNE-EN 6018:2017

    Aerospace series - Test methods for metallic materials - Determination of density according to displacement method (Endorsed by Asociación Española de Normalización in December of 2017.)
    12/1/2017 - PDF - English - AENOR
    Learn More
    €17.00

  • UNE-EN 2306:2017

    Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars (Endorsed by Asociación Española de Normalización in December of 2017.)
    12/1/2017 - PDF - English - AENOR
    Learn More
    €37.00

  • NBN EN 2306:2017

    Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars
    11/22/2017 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2306:2017

    Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars
    11/22/2017 - PDF - French - NBN
    Learn More
    €45.00

  • BS EN 2306:2017

    Aerospace series. Heat resisting. Nickel base alloy Ni-Cr20Co3Fe3. Annealed. Bars
    11/17/2017 - PDF - English - BSI
    Learn More
    €121.90

  • NF L10-035, NF EN 6018 (11/2017)

    Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
    11/15/2017 - Paper - French - AFNOR
    Learn More
    €22.83

  • NF L43-158, NF EN 4808 (10/2017)

    Aerospace series - Flange couplings - Weld coupling, 90o elbow, in nickel alloy - Inch series
    10/27/2017 - Paper - English, French - AFNOR
    Learn More
    €42.41

  • NF L10-718, NF EN 2306 (10/2017)

    Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars
    10/25/2017 - Paper - English, French - AFNOR
    Learn More
    €42.41

  • DIN EN 3875:2017-10

    Aerospace series - Metallic materials, Filler metal for brazing - Technical specification; German and English version EN 3875:2017
    10/1/2017 - PDF - English, German - DIN
    Learn More
    €96.00

  • NBN EN 3875:2017

    Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
    9/22/2017 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN 3875:2017

    Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
    9/22/2017 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN 3875:2017

    Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
    9/22/2017 - PDF - French - NBN
    Learn More
    €56.00

  • SAE AMS 4500J:2017-09-21

    Copper, Sheet, Strip, and Plate Soft Annealed
    9/21/2017 - PDF - English - SAE
    Learn More
    €73.00

  • BS EN 3875:2017

    Aerospace series. Metallic materials, Filler metal for brazing. Technical specification
    9/4/2017 - PDF - English - BSI
    Learn More
    €202.40

  • UNE-EN 3875:2017

    Aerospace series - Metallic materials, Filler metal for brazing - Technical specification (Endorsed by Asociación Española de Normalización in September of 2017.)
    9/1/2017 - PDF - English - AENOR
    Learn More
    €74.00

  • SAE AMS 4485A:2017-08-07

    Magnesium Alloy, Extrusions 4.0Y - 2.25Nd - 0.5Zr (WE43C - T5) Precipitation Heat Treated
    8/7/2017 - PDF - English - SAE
    Learn More
    €73.00

  • NF L10-901, NF EN 3875 (08/2017)

    Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
    8/2/2017 - Paper - English, French - AFNOR
    Learn More
    €87.56

  • SAE AMS 5951A:2017-07-20

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable
    7/20/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5917:2017-04-24

    Metal Injection Molded Nickel Based Alloy 718 Parts Hot Isostatically Pressed, Solutioned and Aged
    4/24/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS-L-18331B:2017-04-05

    Lead Alloy Pig (Stabilized: Apr 2017)
    4/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4501F:2017-04-04

    Copper Sheet, Strip, and Plate Oxygen-Free, Light Cold Rolled (Stabilized: Apr 2017)
    4/4/2017 - PDF - English - SAE
    Learn More
    €73.00

  • DIN EN 2302:2017-02

    Aerospace series - Heat resisting nickel base alloy Ni-Cr20Co3Fe3 - Rp 0,2 >= 310 MPa - Sheets and strips 0,25 mm < a <= 3 mm; German and English version FprEN 2302:2016
    2/1/2017 - PDF - English, German - DIN
    Learn More
    €47.60

  • SAE AMS 4787G:2017-01-05

    Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature
    1/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS-DTL-22499/2B:2017-01-05

    SHIM STOCK, LAMINATED, BRASS (Stabilized: Jan 2017)
    1/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • ASD-STAN prEN 4842 (10/25/2016)

    Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D <= 250 mm - 1070 MPa <= Rm <= 1200 MPa - Premium quality (pq)
    10/25/2016 - PDF - English - ASD-STAN
    Learn More
    €58.50

  • SAE AMS 5599H:2016-10-06

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb) Annealed
    10/6/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5662N:2016-06-21

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50AI - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable
    6/21/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5841G:2016-06-06

    Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated for Work Strengthening
    6/6/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5842G:2016-06-06

    Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened
    6/6/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5843G:2016-06-06

    Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work Strengthened, and Aged
    6/6/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4396F:2016-05-12

    Magnesium Alloy Welding Wire 3.2 Rare Earths - 2.5Zn - 0.72Zr (EZ33A)
    5/12/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4395F:2016-05-12

    Magnesium Alloy Welding Wire 9.0Al - 2.0Zn (AZ92A)
    5/12/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4399:2016-05-12

    Magnesium Alloy Welding Wire 5.1Y - 3.0Re - 0.7Zr (WE54A)
    5/12/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4400:2016-05-12

    Magnesium Alloy Welding Wire 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A)
    5/12/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4398:2016-05-12

    Magnesium Alloy Welding Wire 8.7Al - 0.70Zn - 0.26Mn (AZ91E)
    5/12/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4391:2016-05-11

    Magnesium Alloy Welding Wire 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A)
    5/11/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4393:2016-05-11

    Magnesium Alloy Welding Wire 4.0Y - 2.3Nd - 0.7Zr (WE43B)
    5/11/2016 - PDF - English - SAE
    Learn More
    €73.00

  • NF L10-709, NF EN 4377 (04/2016)

    Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D < or = 300 mm
    4/16/2016 - Paper - English, French - AFNOR
    Learn More
    €42.41

  • SAE AMS 4803E:2015-10-29

    Zinc Alloy Castings, Die 4.0Al – 0.04Mg (AG40A) As Cast
    10/29/2015 - PDF - English - SAE
    Learn More
    €73.00

  • UNE-EN 4377:2015

    Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D = 300 mm (Endorsed by AENOR in October of 2015.)
    10/1/2015 - PDF - English - AENOR
    Learn More
    €50.00

  • SAE AMS 4871H:2015-09-13

    Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered (Stabilized: Sep 2015)
    9/13/2015 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5580L:2015-07-16

    Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 74Ni - 15.5Cr - 8.0Fe Annealed
    7/16/2015 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 4508H:2015-03-26

    Copper-Zinc Alloy, Laminated Sheet 70Cu - 30Zn Surface Bonded
    3/26/2015 - PDF - English - SAE
    Learn More
    €73.00

  • NF L10-005-1, NF EN 2032-001 (03/2015)

    Aerospace series - Metallic materials - Part 001 : conventional designation
    3/11/2015 - Paper - English, French - AFNOR
    Learn More
    €104.89

  • SAE AMS 5704K:2015-01-14

    Nickel Alloy, Corrosion and Heat-Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated
    1/14/2015 - PDF - English - SAE
    Learn More
    €73.00

  • NF L10-594, NF EN 2402 (12/2014)

    Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D < or = 10 mm
    12/26/2014 - Paper - English, French - AFNOR
    Learn More
    €42.41

  • SAE AMS 4700D:2014-12-03

    Copper Wire, Bare High Purity
    12/3/2014 - PDF - English - SAE
    Learn More
    €73.00

  • DIN EN 2032-001:2014-10

    Aerospace series - Metallic materials - Part 001: Conventional designation; German and English version EN 2032-001:2014
    10/1/2014 - PDF - English, German - DIN
    Learn More
    €103.00

  • UNE-EN 2032-001:2014

    Aerospace series - Metallic materials - Part 001: Conventional designation (Endorsed by AENOR in October of 2014.)
    10/1/2014 - PDF - English - AENOR
    Learn More
    €80.00

  • NF L10-004, NF EN 2043 (09/2014)

    Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)
    9/6/2014 - Paper - English, French - AFNOR
    Learn More
    €42.41

  • BS EN 2032-001:2014

    Aerospace series. Metallic materials. Conventional designation
    8/31/2014 - PDF - English - BSI
    Learn More
    €236.90

  • NBN EN 2032-001:2014

    Aerospace series - Metallic materials - Part 001: Conventional designation
    8/22/2014 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 2032-001:2014

    Aerospace series - Metallic materials - Part 001: Conventional designation
    8/22/2014 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 2032-001:2014

    Aerospace series - Metallic materials - Part 001: Conventional designation
    8/22/2014 - PDF - French - NBN
    Learn More
    €77.00

  • SAE AMS 2662:2014-07-31

    Brazing, Gold-Nickel Alloy Filler Metal
    7/31/2014 - PDF - English - SAE
    Learn More
    €73.00

  • DIN EN 2402:2014-07

    Aerospace Series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D <= 10 mm; German and English version EN 2402:2014
    7/1/2014 - PDF - English, German - DIN
    Learn More
    €54.80

  • NBN EN 2402:2014

    Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D = 10 mm
    6/20/2014 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 2402:2014

    Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D = 10 mm
    6/20/2014 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 2402:2014

    Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D = 10 mm
    6/20/2014 - PDF - French - NBN
    Learn More
    €45.00

  • UNE-EN 2402:2014

    Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D <= 10 mm (Endorsed by AENOR in June of 2014.)
    6/1/2014 - PDF - English - AENOR
    Learn More
    €40.00

  • BS EN 2402:2014

    Aerospace series. Heat resisting nickel base alloy NiCr20Co3Fe3. Annealed. Wire. D 10 mm
    5/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • SAE AMS 5915:2014-02-06

    Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings, 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B, Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated, Precipitation Heat Treatable
    2/6/2014 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5606F:2013-12-12

    Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb (NB) - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution Heat Treated
    12/12/2013 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 5709H:2013-12-02

    Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution, Stabilization, and Precipitation Heat Treated
    12/2/2013 - PDF - English - SAE
    Learn More
    €73.00

  • NF L10-038, NF EN 4268 (11/2013)

    Aerospace series - Metallic materials - Heat treatment facilities - General requirements
    11/16/2013 - Paper - English, French - AFNOR
    Learn More
    €76.40

  • SAE AMS 5589F:2013-11-07

    Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
    11/7/2013 - PDF - English - SAE
    Learn More
    €73.00

  • NF L10-012, NF EN 3718 (11/2013)

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
    11/2/2013 - Paper - English, French - AFNOR
    Learn More
    €66.72

  • NF L17-018, NF EN 4526 (11/2013)

    Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
    11/2/2013 - Paper - English, French - AFNOR
    Learn More
    €42.41

  • MIL-DTL-32477:2013

    Rod and Bar, Cobalt-Nickel-Chromium-Iron-Molybdenum Alloy, for use in Critical Seawater Applications
    10/22/2013 - PDF sécurisé - English - DODNAV
    Learn More
    €25.00

  • NBN EN 2043:2013

    Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)
    9/20/2013 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 2043:2013

    Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)
    9/20/2013 - PDF - English - NBN
    Learn More
    €45.00

  • NF L10-002-003, NF EN 4500-003 (09/2013)

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003 : specific rules for heat resisting alloys
    9/14/2013 - Paper - English, French - AFNOR
    Learn More
    €87.56

  • NF L10-002-001, NF EN 4500-001 (09/2013)

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001 : general rules
    9/14/2013 - Paper - English, French - AFNOR
    Learn More
    €95.37

  • DIN EN 2043:2013-09

    Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings); German and English version EN 2043:2013
    9/1/2013 - PDF - English, German - DIN
    Learn More
    €40.80

  • BS EN 2043:2013

    Aerospace series. Metallic materials. General requirements for semi-finished product qualification (excluding forgings and castings)
    8/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • UNE-EN 2043:2013

    Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings) (Endorsed by AENOR in August of 2013.)
    8/1/2013 - PDF - English - AENOR
    Learn More
    €37.00

  • NF L10-034-4, NF EN 4050-4 (07/2013)

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4 : acceptance criteria
    7/19/2013 - Paper - English, French - AFNOR
    Learn More
    €30.64

  • NF L10-034-3, NF EN 4050-3 (07/2013)

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3 : reference blocks
    7/19/2013 - Paper - English, French - AFNOR
    Learn More
    €66.72

  • NF L10-034-1, NF EN 4050-1 (07/2013)

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1 : general requirements
    7/19/2013 - Paper - English, French - AFNOR
    Learn More
    €66.72

  • DIN EN 4526:2013-05

    Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip; German and English version EN 4526:2013
    5/1/2013 - PDF - English, German - DIN
    Learn More
    €47.60

  • SAE AMS-H-7199A:2013-04-19

    Heat Treatment of Wrought Copper-Beryllium Alloys, Process for (Copper Alloys: Numbers C17000, C17200, C17300, C17500, and C17510) (Stabilized: Apr 2013)
    4/19/2013 - PDF - English - SAE
    Learn More
    €73.00

  • NBN EN 4526:2013

    Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
    3/22/2013 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 4526:2013

    Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
    3/22/2013 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 4526:2013

    Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
    3/22/2013 - PDF - French - NBN
    Learn More
    €45.00

  • UNE-EN 4526:2013

    Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip (Endorsed by AENOR in March of 2013.)
    3/1/2013 - PDF - English - AENOR
    Learn More
    €37.00

  • NF L10-034-2, NF EN 4050-2 (02/2013)

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2 : performance of test
    2/16/2013 - Paper - English, French - AFNOR
    Learn More
    €87.56

  • SAE AMS 2773E:2013-02-11

    Heat Treatment Cast Nickel Alloy and Cobalt Alloy Parts
    2/11/2013 - PDF - English - SAE
    Learn More
    €73.00

  • BS EN 4526:2013

    Aerospace series. Metallic materials. Test methods. Sharp edge-notch tensile testing for sheet and strip
    1/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • DIN EN 4050-1:2012-12

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements; German and English version EN 4050-1:2012
    12/1/2012 - PDF - English, German - DIN
    Learn More
    €75.40

  • DIN EN 4050-2:2012-12

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test; German and English version EN 4050-2:2012
    12/1/2012 - PDF - English, German - DIN
    Learn More
    €75.40

  • DIN EN 4050-3:2012-12

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks; German and English version EN 4050-3:2012
    12/1/2012 - PDF - English, German - DIN
    Learn More
    €61.70

  • DIN EN 4050-4:2012-12

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria; German and English version EN 4050-4:2012
    12/1/2012 - PDF - English, German - DIN
    Learn More
    €40.80

  • DIN EN 4268:2012-12

    Aerospace series - Metallic materials - Heat treatment facilities - General requirements; German and English version EN 4268:2012
    12/1/2012 - PDF - English, German - DIN
    Learn More
    €75.40

  • DIN EN 4500-001:2012-12

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules; German and English version EN 4500-001:2012
    12/1/2012 - PDF - English, German - DIN
    Learn More
    €89.00

  • DIN EN 4500-003:2012-12

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys; German and English version EN 4500-003:2012
    12/1/2012 - PDF - English, German - DIN
    Learn More
    €89.00

  • UNE-EN 4500-005:2012 (R2018)

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels (Endorsed by AENOR in December of 2012.)
    12/1/2012 - PDF - English - AENOR
    Learn More
    €71.00

  • UNE-EN 4500-001:2012 (R2018)

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules (Endorsed by AENOR in December of 2012.)
    12/1/2012 - PDF - English - AENOR
    Learn More
    €74.00

  • UNE-EN 4500-003:2012 (R2018)

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys (Endorsed by AENOR in December of 2012.)
    12/1/2012 - PDF - English - AENOR
    Learn More
    €73.00

  • UNE-EN 4500-004:2012 (R2018)

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys (Endorsed by AENOR in December of 2012.)
    12/1/2012 - PDF - English - AENOR
    Learn More
    €71.00

  • NBN EN 4268:2012

    Aerospace series - Metallic materials - Heat treatment facilities - General requirements
    11/23/2012 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN 4268:2012

    Aerospace series - Metallic materials - Heat treatment facilities - General requirements
    11/23/2012 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN 4500-001:2012

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
    11/23/2012 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN 4500-001:2012

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
    11/23/2012 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN 4500-001:2012

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
    11/23/2012 - PDF - French - NBN
    Learn More
    €56.00

  • NBN EN 4500-003:2012

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys
    11/23/2012 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN 4500-003:2012

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys
    11/23/2012 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN 4500-003:2012

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys
    11/23/2012 - PDF - French - NBN
    Learn More
    €56.00

  • NBN EN 4050-1:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements
    11/23/2012 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 4050-1:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements
    11/23/2012 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 4050-2:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test
    11/23/2012 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 4050-2:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test
    11/23/2012 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 4050-2:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test
    11/23/2012 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 4050-3:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks
    11/23/2012 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 4050-3:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks
    11/23/2012 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 4050-4:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria
    11/23/2012 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 4050-4:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria
    11/23/2012 - PDF - English - NBN
    Learn More
    €45.00

  • UNE-EN 4268:2012 (R2018)

    Aerospace series - Metallic materials - Heat treatment facilities - General requirements (Endorsed by AENOR in November of 2012.)
    11/1/2012 - PDF - English - AENOR
    Learn More
    €65.00

  • UNE-EN 4050-1:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements (Endorsed by AENOR in November of 2012.)
    11/1/2012 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN 4050-2:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test (Endorsed by AENOR in November of 2012.)
    11/1/2012 - PDF - English - AENOR
    Learn More
    €59.00

  • UNE-EN 4050-3:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks (Endorsed by AENOR in November of 2012.)
    11/1/2012 - PDF - English - AENOR
    Learn More
    €61.00

  • UNE-EN 4050-4:2012

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria (Endorsed by AENOR in November of 2012.)
    11/1/2012 - PDF - English - AENOR
    Learn More
    €24.00

  • BS EN 4050-1:2012

    Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. General requirements
    10/31/2012 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 4050-2:2012

    Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Performance of test
    10/31/2012 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 4050-3:2012

    Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Reference blocks
    10/31/2012 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 4050-4:2012

    Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Acceptance criteria
    10/31/2012 - PDF - English - BSI
    Learn More
    €121.90

  • BS EN 4268:2012

    Aerospace series. Metallic materials. Heat treatment facilities. General requirements
    10/31/2012 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 4500-001:2012

    Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. General rules
    10/31/2012 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN 4500-003:2012

    Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for heat resisting alloys
    10/31/2012 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN 4500-004:2012

    Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for titanium and titanium alloys
    10/31/2012 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN 4500-005:2012

    Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for steels
    10/31/2012 - PDF - English - BSI
    Learn More
    €202.40

  • WL 2.0000 bis 2.9999:2012-10

    Aerospace series - Non-ferrous metals, except light metals - Survey sheet
    10/1/2012 - PDF - English, German - DIN
    Learn More
    €23.80

  • WL 2.4639-1:2012-10

    Aerospace series - High-temperature nickel alloy with approx. 0,2 C - 20 Cr - Part 1: Welding filler metal
    10/1/2012 - PDF - German - DIN
    Learn More
    €23.80

  • WL 2.4639-100:2012-10

    Aerospace series - High temperature nickel alloy with approx. 0,2 C - 20 Cr - Part 100: Welding filler metal - Notes for design and production, cross-reference
    10/1/2012 - PDF - German - DIN
    Learn More
    €23.80

  • WL 2.4676-1:2012-10

    Aerospace series - High-temperature cast nickel alloy with approx. 0,15 C - 10 Co - 10 W - 9 Cr - 5,5 Al - 2,5 Mo - Part 1: Precision casting
    10/1/2012 - PDF - German - DIN
    Learn More
    €33.60

  • WL 2.4676-100:2012-10

    Aerospace series - High temperature nickel-cast-alloy with approx. 0,15 C - 10 Co - 10 W - 9 Cr - 5,5 Al - 2,5 Mo - Part 100: Precision casting - Notes for design and production, cross-reference
    10/1/2012 - PDF - German - DIN
    Learn More
    €23.80

  • WL 2.4682-1:2012-10

    Aerospace series - High temperature cast cobalt alloy with approx. 0,5 C - 26 Cr - 11 Ni - 7,5 W - Part 1: Precision casting
    10/1/2012 - PDF - German - DIN
    Learn More
    €33.60

  • WL 2.4682-100:2012-10

    Aerospace series - High temperature cast cobalt alloy with approx. 0,5 C - 26 Cr - 11 Ni - 7,5 W - Part 100: Precision casting - Notes for design and production, cross-reference
    10/1/2012 - PDF - German - DIN
    Learn More
    €23.80

  • WL 2.4964-1:2012-10

    Aerospace series - High temperature cobalt alloy with approx. 0,1 C - 20 Cr - 15 W - 10 Ni - Part 1: Sheet and strip
    10/1/2012 - PDF - German - DIN
    Learn More
    €33.60

  • WL 2.4964-3:2012-10

    Aerospace series - High temperature cobalt alloy with approx. 0,1 C - 20 Cr - 15 W - 10 Ni - Part 3: Welding filler metal
    10/1/2012 - PDF - German - DIN
    Learn More
    €23.80

  • WL 2.4964-100:2012-10

    Aerospace series - High-temperature cobalt alloy with approx. 0,1 C - 20 Cr - 15 W - 10 Ni - Part 100: Sheet, strip, bar, forging and welding filler metal - Notes for design and production, cross-reference
    10/1/2012 - PDF - German - DIN
    Learn More
    €41.40

  • SAE AMS 4598A:2012-09-14

    Copper Nickel Tin Alloy, Mechanical Tube 77Cu - 15Ni - 8Sn Solution Annealed and Spinodal Hardened (TX 00)
    9/14/2012 - PDF - English - SAE
    Learn More
    €73.00

  • DIN EN 3718:2012-08

    Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes; German and English version EN 3718:2012
    8/1/2012 - PDF - English, German - DIN
    Learn More
    €68.30

  • NF L06-452, NF EN 3873 (08/2012)

    Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces
    8/1/2012 - Paper - English, French - AFNOR
    Learn More
    €127.55

  • NF L10-009, NF EN 6072 (06/2012)

    Aerospace series - Metallic materials - Test methods - Constant amplitude fatigue testing
    6/1/2012 - Paper - English, French - AFNOR
    Learn More
    €115.12

  • DIN EN 3844-1:2012-01

    Aerospace series - Flammability of non metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation; German and English version EN 3844-1:2011
    1/1/2012 - PDF - English, German - DIN
    Learn More
    €82.60

  • DIN EN 3844-2:2012-01

    Aerospace series - Flammability of non metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation; German and English version EN 3844-2:2011
    1/1/2012 - PDF - English, German - DIN
    Learn More
    €75.40

  • DIN EN 3844-3:2012-01

    Aerospace series - Flammability of non metallic materials - Part 3: Small burner test, 45° - Determination of the resistance of material to flame and glow propagation and to flame penetration; German and English version EN 3844-3:2011
    1/1/2012 - PDF - English, German - DIN
    Learn More
    €75.40

  • UNE-EN 3844-1:2011

    Aerospace series - Flammability of non metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation (Endorsed by AENOR in January of 2012.)
    1/1/2012 - PDF - English - AENOR
    Learn More
    €68.00

  • UNE-EN 3844-2:2011 (R2017)

    Aerospace series - Flammability of non metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation (Endorsed by AENOR in January of 2012.)
    1/1/2012 - PDF - English - AENOR
    Learn More
    €67.00

  • UNE-EN 3844-3:2011 (R2017)

    Aerospace series - Flammability of non metallic materials - Part 3: Small burner test, 45° - Determination of the resistance of material to flame and glow propagation and to flame penetration (Endorsed by AENOR in January of 2012.)
    1/1/2012 - PDF - English - AENOR
    Learn More
    €65.00

  • SAE AMS 4597A:2019-04-30

    Copper-Nickel-Tin Alloy, Bars and Rods 77Cu - 15Ni - 8Sn Solution Annealed, Cold Finished and Spinodal Hardened (TX TS)
    12/19/2011 - PDF - English - SAE
    Learn More
    €73.00

  • NBN EN 3844-1:2011

    Aerospace series - Flammability of non metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation
    12/14/2011 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN 3844-1:2011

    Aerospace series - Flammability of non metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation
    12/14/2011 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN 3844-1:2011

    Aerospace series - Flammability of non metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation
    12/14/2011 - PDF - French - NBN
    Learn More
    €56.00

  • NBN EN 3844-2:2011

    Aerospace series - Flammability of non metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation
    12/14/2011 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 3844-2:2011

    Aerospace series - Flammability of non metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation
    12/14/2011 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 3844-2:2011

    Aerospace series - Flammability of non metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation
    12/14/2011 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 3844-3:2011

    Aerospace series - Flammability of non metallic materials - Part 3: Small burner test, 45° - Determination of the resistance of material to flame and glow propagation and to flame penetration
    12/14/2011 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 3844-3:2011

    Aerospace series - Flammability of non metallic materials - Part 3: Small burner test, 45° - Determination of the resistance of material to flame and glow propagation and to flame penetration
    12/14/2011 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 3844-3:2011

    Aerospace series - Flammability of non metallic materials - Part 3: Small burner test, 45° - Determination of the resistance of material to flame and glow propagation and to flame penetration
    12/14/2011 - PDF - French - NBN
    Learn More
    €45.00

  • BS EN 3844-1:2011

    Aerospace series. Flammability of non metallic materials. Small burner test, vertical. Determination of the vertical flame propagation
    11/30/2011 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 3844-3:2011 (R2017)

    Aerospace series. Flammability of non metallic materials. Small burner test, 45. Determination of the resistance of material to flame and glow propagation and to flame penetration
    11/30/2011 - PDF - English - BSI
    Learn More
    €144.90

  • DIN EN 3873:2011-11

    Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces; German and English version EN 3873:2010
    11/1/2011 - PDF - English, German - DIN
    Learn More
    €114.10

  • SAE AMS 4595:2018-05-03

    Copper Nickel Tin Alloy Plate 77Cu – 15Ni – 8Sn Solution Annealed and Spinodal Hardened (TX 00)
    7/8/2011 - PDF - English - SAE
    Learn More
    €73.00

  • DIN EN 6072:2011-06

    Aerospace series - Metallic materials - Test methods - Constant amplitude fatigue testing; German and English version EN 6072:2010
    6/1/2011 - PDF - English, German - DIN
    Learn More
    €108.80

  • BS EN 3873:2010

    Aerospace series. Test methods for metallic materials. Determination of fatigue crack growth rates using corner-cracked (CC) test pieces
    2/28/2011 - PDF - English - BSI
    Learn More
    €236.90

  • UNE-EN 3873:2010

    Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces (Endorsed by AENOR in February of 2011.)
    2/1/2011 - PDF - English - AENOR
    Learn More
    €81.00

  • NBN EN 3873:2010

    Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces
    12/17/2010 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 3873:2010

    Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces
    12/17/2010 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 3873:2010

    Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces
    12/17/2010 - PDF - French - NBN
    Learn More
    €77.00

  • NF L06-380-005, NF EN 4632-005 (10/2010)

    Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 005 : homogeneous assemblies of heat resisting Ni or Co base alloys
    10/1/2010 - Paper - English, French - BNAE
    Learn More
    €129.53

Items 1 to 200 of 746 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4