Call +33 (1) 40 02 03 05

49.025 : Materials for aerospace construction

Items 1 to 200 of 7682 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 39
  • SAE AMS 3277K:2019-02-08

    Sealing Compound, Polythioether Rubber, Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
    2/8/2019 - PDF - English - SAE
    Learn More
    €71.00

  • ASD STAN prEN 4700-002:2019

    Aerospace series-Steel and heat resisting alloys Wrought products - Technical specification Part 002: Bars and sections
    1/31/2019 - PDF - English - ASD-STAN
    Learn More
    €154.50

  • SAE AMS 6482B:2019-01-07

    Steel Bars, Forgings, and Tubing 1.5Si - 1.25Cr - 3.8Ni - 0.50Mo - 0.30V (0.40C) Vacuum Remelted Annealed
    1/7/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6433H:2019-01-07

    Steel, Sheet, Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod)
    1/7/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 2759/3H:2019-01-07

    Heat Treatment Precipitation-Hardening Corrosion-Resistant, Maraging, and Secondary Hardening Steel Parts
    1/7/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5541H:2019-01-07

    Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 73Ni - 15.5Cr - 2.4Ti - 0.7Al - 7.0Fe Annealed
    1/7/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5605G:2019-01-07

    Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated
    1/7/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5960A:2019-01-07

    Nickel Alloy, Corrosion and Heat Resistant Sheet, Strip, and Foil Ni - 18Cr - 2.8Mo - 5.5Cb (Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Vacuum Induction Melted and Consumable Electrode Remelted Solution Heat Treated
    1/7/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6947B:2019-01-07

    Titanium Alloy, Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed, Heat Treatable
    1/7/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5555F:2019-01-07

    Nickel Wire and Ribbon 99Ni
    1/7/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6498B:2019-01-04

    Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) Double Vacuum Melted Premium Aircraft-Quality for Bearing Applications
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6499B:2019-01-04

    Steel, Bars, Forgings, and Tubing 2.7Si - 0.85Cr - 1.8Ni - 0.4Mo - 0.2V - (0.37 - 0.44C) Double Vacuum Melted
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 2484C:2019-01-04

    Blackening Solution for Steel Touch-Up Method
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5872F:2019-01-04

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 48Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted Solution Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4469A:2019-01-04

    Aluminum Alloy Tubing, Seamless, Drawn 1.8Cu - 1.0Mg - 0.8Si - 0.20Cr Solution Heat Treated, Stress-Relieved by Stretching, and Aged (2013-T4511)
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4311F:2019-01-04

    Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4972J:2019-01-04

    Titanium Alloy Bars, Wire, and Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4900R:2019-01-04

    Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield Strength
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4778L:2019-01-04

    Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 2431/8C:2019-01-04

    Peening Media Conditioned Carbon Steel Cut Wire Shot, High Hardness (55 to 62 HRC) (AWCH)
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4442H:2019-01-04

    Magnesium Alloy, Sand Castings 3.2 Rare Earths - 2.5Zn - 0.70Zr (EZ33A-T5) Precipitation Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4452F:2019-01-04

    Magnesium Alloy, Investment Castings 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6) Solution and Precipitation Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4453G:2019-01-04

    Magnesium Alloy, Investment Castings 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4455H:2019-01-04

    Magnesium Alloy, Investment Castings 10Al (AM100A-T6) Solution and Precipitation Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5607F:2019-01-04

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 73Ni - 7.0Cr - 16.5Mo Solution Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5586H:2019-01-04

    Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr Consumable Electrode Remelted or Vacuum Induction Melted, Annealed
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5708M:2019-01-04

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5870F:2019-01-04

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 60.5Ni - 23Cr - 14Fe - 0.35Ti - 1.4Al Solution Heat Treated
    1/4/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5653J:2019-01-03

    Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 17Cr - 12Ni - 2.5Mo (0.030 Max C) (316L) Solution Heat Treated
    1/3/2019 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5868C:2019-01-02

    Steel, Corrosion Resistant, Seamless and Welded Aircraft Tubing 19Cr - 9.5Ni (304) Cold Drawn, 1/2 Hard Temper
    1/2/2019 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS 5688M:2019-01-02

    Steel, Corrosion Resistant, Wire 18Cr - 9.0Ni (302) Spring Temper
    1/2/2019 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS 4250C:2019-01-02

    Aluminum Alloy, Plate 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651) Solution Heat Treated, Stress Relieved, and Overaged
    1/2/2019 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS 4132H:2019-01-02

    Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61) Solution and Precipitation Heat Treated
    1/2/2019 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS 4083M:2019-01-02

    Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
    1/2/2019 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS 4085F:2019-01-02

    Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged
    1/2/2019 - PDF - English - SAE
    Learn More
    €66.62

  • PR NF L10-555, PR NF EN 2465 (01/2019)

    Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa < or = Rm inferior or equal 680 MPa - Bar for machining - 4 mm < or = De < or = 100 mm
    1/1/2019 - Paper - French - BNAE
    Learn More
    €39.66

  • ASTM Volume 15.03 - Multi-User - Single-Site Online

    Space Simulation - Aerospace and Aircraft – Composite Materials
    1/1/2019 - Internet - English - ASTM
    Learn More
    €838.00

  • SAE AMS 7908E:2018-12-28

    Beryllium Near-Net Preforms Standard Grade Hot Isostatic Pressed
    12/28/2018 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS 6292K:2018-12-27

    Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.15 - 0.20C) (SAE 4617)
    12/27/2018 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS 4470C:2018-12-27

    Aluminum Alloy, Plate (7085-T7451) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged
    12/27/2018 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS-WW-T-700/7B:2018-12-27

    Tube, Aluminum Alloy, Drawn, Seamless, 7075 (Stabilized: Dec 2018)
    12/27/2018 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS 4914G:2018-12-27

    Titanium Alloy Cold Rolled Sheet and Strip 15V - 3Al - 3Cr - 3Sn Solution Heat Treated
    12/27/2018 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS 4418J:2018-12-27

    Magnesium Alloy, Sand Castings 2.5Ag - 2.1Di - 0.70Zr (QE22A-T6) Solution and Precipitation Heat Treated
    12/27/2018 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS 4439H:2018-12-27

    Magnesium Alloy, Sand Castings 4.2Zn - 1.2 Rare Earths - 0.7Zr (ZE41A-T5) Precipitation Heat Treated
    12/27/2018 - PDF - English - SAE
    Learn More
    €66.62

  • SAE AMS 5612K:2018-12-20

    Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings, 12Cr Ferrite Controlled, Annealed
    12/20/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5651K:2018-12-20

    Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 25Cr - 20Ni (310) Solution Heat Treated
    12/20/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 2806D:2018-12-20

    Identification Bars, Wire, Mechanical Tubing, and Extrusions, Carbon and Alloy Steels and Corrosion and Heat-Resistant Steels and Alloys (Stabilized: Dec 2018)
    12/20/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5649H:2018-12-14

    Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 13Ni - 2.1Mo Free Machining Solution Heat Treated
    12/14/2018 - PDF - English - SAE
    Learn More
    €71.00

  • ASD-STAN TR 3198:07/12/2018

    Aerospace series — Manufacturers' identification monograms and marks for EN aerospace products
    12/7/2018 - PDF - English, French, German - ASD-STAN
    Learn More
    €199.50

  • DIN EN 3468:2018-12

    Aerospace series - Steel FE-PA13 - Softened - 500 MPa <= Rm <= 700 MPa - Forgings - De <= 100 mm; German and English version FprEN 3468:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2951:2018-12

    Aerospace series - Metallic materials - Test method - Micrographic determination of content of non-metallic inclusions; German and English version FprEN 2951:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €61.70

  • DIN EN 3470:2018-12

    Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D <= 150 mm - 1200 MPa <= Rm <= 1400 MPa; German and English version FprEN 3470:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2816:2018-12

    Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D <= 200 mm, Rm >= 965 MPa; German and English version FprEN 2816:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 3358:2018-12

    Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D <= 150 mm - Rm >= 1400 MPa; German and English version FprEN 3358:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2959:2018-12

    Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners - 3 mm <= D <= 30 mm; German and English version FprEN 2959:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 3018:2018-12

    Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D <= 3 mm; German and English version FprEN 3018:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2320:2018-12

    Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a <= 75 mm; German and English version FprEN 2320:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 3378:2018-12

    Aerospace series - Titanium Ti-P99002 - annealed - Wire for rivet - 1,6 mm <= D <= 10 mm; German and English version FprEN 3378:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €40.80

  • DIN EN 3314:2018-12

    Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D <= 75 mm; German and English version FprEN 3314:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2564:2018-12

    Aerospace series - Carbon fibre laminates - Determination of the fibre, resin and void contents; German and English version EN 2564:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €61.70

  • DIN EN 2952:2018-12

    Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D <= 50 mm - 1270 MPa <= Rm <= 1550 MPa; German and English version FprEN 2952:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 3220:2018-12

    Aerospace series - Heat resisting nickel base alloy (Ni-P101 HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm <= D <= 30 mm; German and English version FprEN 3220:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2957:2018-12

    Aerospace series - Method of preparation of forged samples; German and English version FprEN 2957:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 3219:2018-12

    Aerospace series - Heat resisting nickel base alloy (Ni-P100HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm <= D <= 30 mm; German and English version FprEN 3219:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • SAE AMS 6497B:2018-11-28

    Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) Electroslag Remelted or Consumable Electrode Vacuum Remelted Premium Aircraft-Quality for Bearing Applications
    11/28/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AS 27194C:2018-11-26

    SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-P-5315 (Stabilized: Nov 2018)
    11/26/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6496B:2018-11-20

    Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) Aircraft-Quality for Bearing Applications
    11/20/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4446D:2018-11-14

    Magnesium Alloy, Sand Castings 8.7Al - 0.70Zn - 0.26Mn (AZ91E-T6) Solution and Precipitation Heat Treated
    11/14/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AS 5127C:2018-11-14

    Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens
    11/14/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4904D:2018-11-08

    Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated and Aged
    11/8/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS-QQ-A-225/5A:2018-11-06

    Aluminum Alloy, 2017, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished (Stabilized: Nov 2018)
    11/6/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6362H:2018-11-05

    Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength
    11/5/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6365L:2018-11-05

    Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress Relieved
    11/5/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6519E:2018-11-05

    Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni - 3.0Mo - 1.4Ti - 0.10Al Premium Aircraft Quality Double Vacuum Melted, Annealed
    11/5/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6490J:2018-11-05

    Steel Bars, Forgings, and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted
    11/5/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6492B:2018-11-05

    Steel Bars, Forgings, and Tubing 1.0Cr - 3.25Ni - 0.40Mo (0.17 - 0.22C) Aircraft Quality
    11/5/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6493B:2018-11-05

    Steel Bars, Forgings, and Tubing 1.0Cr - 3.25Ni - 0.40Mo (0.17 - 0.22C) Electroslag Remelted or Consumable Electrode Vacuum Remelted Premium Aircraft-Quality
    11/5/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 2251J:2018-11-05

    Tolerances Low-Alloy Steel Bars
    11/5/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5512M:2018-11-05

    Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (347) Solution Heat Treated
    11/5/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4780G:2018-11-05

    Manganese Alloy, Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range
    11/5/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6361G:2018-11-02

    Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength
    11/2/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5112N:2018-11-02

    Carbon Steel, Wire Spring Quality Music Wire 0.70 - 1.00C Cold Drawn
    11/2/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6491F:2018-11-02

    Steel Bars, Forgings, and Tubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted
    11/2/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5937A:2018-11-02

    Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 11Ni - 2Mo - 1.5Al - 0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
    11/2/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5933A:2018-11-02

    Steel, Corrosion Resistant Bars and Forgings 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted
    11/2/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4210L:2018-11-02

    Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T51) Precipitation Heat Treated
    11/2/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 1435D:2018-11-02

    Liquid Runway Deicing/Anti-Icing Product
    11/2/2018 - PDF - English - SAE
    Learn More
    €71.00

  • DIN EN 2400:2018-11

    Aerospace series - Heat resisting nickel base alloy Ni-P96-HT - Cold drawn and precipitation treated - Wires D <= 10 mm; German and English version FprEN 2400:2018
    11/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • DIN EN 2796:2018-11

    Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD; German and English version EN 2796:2018
    11/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • ASTM D3518/D3518M-18

    Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
    11/1/2018 - PDF - English - ASTM
    Learn More
    €42.00

  • ASTM D3518/D3518M-18 + Redline

    Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
    11/1/2018 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM E1560-18

    Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
    11/1/2018 - PDF - English - ASTM
    Learn More
    €42.00

  • ASTM E1560-18 + Redline

    Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
    11/1/2018 - PDF - English - ASTM
    Learn More
    €51.00

  • BS EN 2369:2018

    Aerospace series. Wires, heat resisting alloys. Diameter 0,2 mm D 8 mm. Dimensions
    10/24/2018 - Paper - English - BSI
    Learn More
    €118.32

  • SAE AMS 1428K:2018-10-24

    Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV
    10/24/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 1431E:2018-10-24

    Solid Runway Deicing/Anti-Icing Product
    10/24/2018 - PDF - English - SAE
    Learn More
    €71.00

  • BS EN 2564:2018

    Aerospace series. Carbon fibre laminates. Determination of the fibre, resin and void contents
    10/18/2018 - Paper - English - BSI
    Learn More
    €118.32

  • SAE AMS 2759/9E:2018-10-18

    Hydrogen Embrittlement Relief (Baking) of Steel Parts
    10/18/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 1451C:2018-10-16

    Disinfectant, Aircraft For Use in Cargo Compartments
    10/16/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 3374E:2018-10-15

    Sealing Compound Aircraft Firewall, Silicone
    10/15/2018 - PDF - English - SAE
    Learn More
    €71.00

  • ASTM D8101/D8101M-18

    Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
    10/15/2018 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM D8101/D8101M-18 + Redline

    Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
    10/15/2018 - PDF - English - ASTM
    Learn More
    €57.00

  • ASTM E2864-18

    Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
    10/1/2018 - PDF - English - ASTM
    Learn More
    €42.00

  • ASTM E2864-18 + Redline

    Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
    10/1/2018 - PDF - English - ASTM
    Learn More
    €51.00

  • DIN EN 2031:2018-10

    Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars; German and English version EN 2031:2018
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2475:2018-10

    Aerospace series - Steel 30CrNiMo8 (1.6580) - Air melted - Hardened and tempered - Bar for machining - De <= 100 mm - 1100 MPa <= Rm <= 1300 MPa; German and English version EN 2475:2018
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2540:2018-10

    Aerospace series - Steel X7CrNiAl17-7 (1.4568) - Air melted - Solution treated and precipitation hardened - Sheet and strip - a <= 6 mm - 1 240 MPa <= Rm <= 1 450 MPa; German and English version EN 2540:2018
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • DIN EN 2541:2018-10

    Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Wire for spring - D <= 4,0 mm; German and English version EN 2541:2018
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • DIN EN 4842:2018-10

    Aerospace series - X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bar for machining - a or D <= 250 mm - 1070 MPa <= Rm <= 1200 MPa - Premium quality (pq); German and English version FprEN 4842:2018
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • WL 3.2374-2:2018-10

    Aerospace; cast aluminium alloy with approx. 7Si-0,3Mg; Part 2: investment casting; Text in German and English
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €33.60

  • WL 3.2384-3:2018-10

    Aerospace; cast aluminium alloy with approx. 7Si-0,6Mg; Part 3: investment casting; Text in German and English
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €33.60

  • WL 3.2384-4:2018-10

    Aerospace; cast aluminium alloy with approx. 7Si-0,6Mg; Part 4: special investment casting; Text in German and English
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €33.60

  • DIN EN 2715:2018-10

    Aerospace series - Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings; German and English version FprEN 2715:2018
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €40.80

  • DIN 65124:2018-10

    Aerospace series - Technical specifications for additive manufacturing of metallic materials with the powder bed process
    10/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • SAE AMS 1450B:2018-09-28

    Disinfectant (Insecticide), Aircraft
    9/28/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5334J:2018-09-26

    Steel, Investment Castings 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tempered
    9/26/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 1424P:2018-09-26

    Fluid, Aircraft Deicing/Anti-Icing, SAE Type I
    9/26/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 2643F:2018-09-19

    Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure
    9/19/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 3275D:2018-09-19

    Sheet, Acrylonitrile Butadiene (NBR) Rubber and Non-Asbestos Fiber Fuel and Oil Resistant (Stabilized: Sep 2018)
    9/19/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AIR 4938C:2018-09-19

    Composite and Bonded Structure Technician/Specialist Training Document
    9/19/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5545G:2018-09-07

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 54Ni – 19Cr – 11Co – 9.8Mo – 3.2Ti – 1.5Al – 0.006B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable
    9/7/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4842F:2018-09-07

    Castings, Leaded Bronze, Sand and Centrifugal 80Cu - 10Sn - 9.5Pb As Cast
    9/7/2018 - PDF - English - SAE
    Learn More
    €71.00

  • PR NF L10-603-1, PR NF EN 4400-1 (09/2018)

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 1: Aluminium and aluminium alloy plate
    9/5/2018 - Paper - French - AFNOR
    Learn More
    €86.06

  • PR NF L10-603-2, PR NF EN 4400-2 (09/2018)

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip
    9/5/2018 - Paper - French - AFNOR
    Learn More
    €86.46

  • PR NF L10-603-3, PR NF EN 4400-3 (09/2018)

    Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section
    9/5/2018 - Paper - French - AFNOR
    Learn More
    €86.46

  • BS EN 2475:2018

    Aerospace series. Steel 30CrNiMo8 (1.6580). Air melted. Hardened and tempered. Bar for machining. De 100 mm. 1 100 MPa Rm 1 300 MPa
    9/4/2018 - Paper - English - BSI
    Learn More
    €118.32

  • ASD-STAN prEN 4866 (09/04/2018)

    Aerospace series - Definitions of imperfections and defects in organic matrix composite materials
    9/4/2018 - PDF - English - ASD-STAN
    Learn More
    €200.00

  • SAE AMS 6532H:2018-09-02

    Steel, Bars and Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Normalized and Overaged Precipitation Hardenable
    9/2/2018 - PDF - English - SAE
    Learn More
    €71.00

  • DIN EN 2600:2018-09

    Aerospace series - Designation of metallic semi-finished products - Rules; German and English version FprEN 2600:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €96.00

  • DIN EN 2279:2018-09

    Aerospace series - Steel FE-PM37 - 900 MPa <= Rm <= 1100 MPa - Forgings - De <= 150 mm; German and English version EN 2279:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • DIN EN 2468:2018-09

    Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm <= a <= 5 mm; German and English version FprEN 2468:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2470:2018-09

    Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm <= D <= 10 mm; German and English version FprEN 2470:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2280:2018-09

    Aerospace series - Steel FE-PM37 - 900 MPa <= Rm <= 1 100 MPa - Sheet - a <= 6 mm; German and English version EN 2280:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • UNE-EN 2540:2018

    Aerospace series - Steel X7CrNiAl17-7 (1.4568) - Air melted - Solution treated and precipitation hardened - Sheet and strip - a = 6 mm - 1 240 MPa = Rm = 1 450 MPa
    9/1/2018 - PDF - English - AENOR
    Learn More
    €40.00

  • UNE-EN 2541:2018

    Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Wire for spring - D = 4,0 mm
    9/1/2018 - PDF - English - AENOR
    Learn More
    €40.00

  • UNE-EN 2279:2018

    Aerospace series - Steel FE-PM37 - 900 MPa <= Rm <= 1 100 MPa - Forgings - De <= 150 mm (Endorsed by Asociación Española de Normalización in September of 2018.)
    9/1/2018 - PDF - English - AENOR
    Learn More
    €40.00

  • DIN EN 2638:2018-09

    Aerospace series - Aluminium alloy 2024-T3 - Extruded bar and section - 1,2 mm <= (a or D) <= 150 mm with coarse peripheral grain control; German and English version FprEN 2638:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • DIN EN 2699:2018-09

    Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm <= D <= 50 mm; German and English version FprEN 2699:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2510:2018-09

    Aerospace series - Aluminium alloy 2024-T42 - Drawn tubes for structural applications; German and English version FprEN 2510:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 2319:2018-09

    Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a <= 75 mm; German and English version EN 2319:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • DIN EN 2387:2018-09

    Aerospace series - Aluminium alloy 2014A- - T6 - Tubes for structures - 0,6 mm <= a <= 12,5 mm; German and English version EN 2387:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • DIN EN 2709:2018-09

    Aerospace series - Aluminium alloy 2024- - T3510 - Bar and section - 1,2 mm <= (a or D) <= 150 mm - With peripheral coarse grain control; German and English version FprEN 2709:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • UNE-EN 2319:2018

    Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a <= 75 mm (Endorsed by Asociación Española de Normalización in September of 2018.)
    9/1/2018 - PDF - English - AENOR
    Learn More
    €40.00

  • UNE-EN 2387:2018

    Aerospace series - Aluminium alloy 2014A- - T6 - Tubes for structures - 0,6 mm <= a <= 12,5 mm (Endorsed by Asociación Española de Normalización in September of 2018.)
    9/1/2018 - PDF - English - AENOR
    Learn More
    €40.00

  • UNE-EN 3719:2018

    Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard (Endorsed by Asociación Española de Normalización in September of 2018.)
    9/1/2018 - PDF - English - AENOR
    Learn More
    €40.00

  • DIN EN 2799:2018-09

    Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD; German and English version EN 2799:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • UNE-EN 2799:2018

    Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD (Endorsed by Asociación Española de Normalización in September of 2018.)
    9/1/2018 - PDF - English - AENOR
    Learn More
    €30.00

  • UNE-EN 2796:2018

    Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD (Endorsed by Asociación Española de Normalización in September of 2018.)
    9/1/2018 - PDF - English - AENOR
    Learn More
    €30.00

  • DIN EN 2667-03:2018-09

    Aerospace series - Non-metallic materials - Foaming structural adhesive films - Test methods - Part 03: Expansion ratio and volatile content; German and English version FprEN 2667-03:2018
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • ASTM F3322-18

    Standard Specification for Small Unmanned Aircraft System (sUAS) Parachutes
    9/1/2018 - PDF - English - ASTM
    Learn More
    €48.00

  • BS EN 2031:2018

    Aerospace series. Steel 102Cr6 (1.2067). Hardened and tempered. Bars
    8/31/2018 - Paper - English - BSI
    Learn More
    €118.32

  • SAE AMS 4989D:2018-08-31

    Titanium Alloy Sheet, Strip, and Plate 3Al - 2.5V Annealed
    8/31/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 3041F:2018-08-31

    Magnetic Particles, Nonfluorescent Wet Method, Oil Vehicle, Ready-to-Use
    8/31/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 3042F:2018-08-31

    Magnetic Particles, Nonfluorescent Wet Method, Dry Powder
    8/31/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 3043E:2018-08-31

    Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Aerosol Packaged
    8/31/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5674F:2018-08-28

    Steel, Corrosion and Heat Resistant, Wire 18Cr - 11.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated
    8/28/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4775K:2018-08-28

    Nickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 °F (977 °C) Solidus to 1970 °F (1077 °C) Liquidus
    8/28/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4776J:2018-08-28

    Nickel Alloy, Brazing Filler Metal 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790 °F (977 °C) Solidus to 1970 °F (1077 °C) Liquidus Range
    8/28/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4777J:2018-08-28

    Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 °F (971 °C) Solidus to 1830 °F (999 °C) Liquidus Range
    8/28/2018 - PDF - English - SAE
    Learn More
    €71.00

  • PR NF L12-030, PR NF EN 2369 (08/2018)

    Aerospace series - Wires, heat resisting alloys - Diameter 0,2 mm < or = D < or = 8 mm - Dimensions
    8/25/2018 - Paper - French - AFNOR
    Learn More
    €43.95

  • PR NF L17-413, PR NF EN 2564 (08/2018)

    Aerospace series - Carbon fibre laminates - Determination of the fibre, resin and void contents
    8/25/2018 - Paper - French - AFNOR
    Learn More
    €54.95

  • PR NF L11-006, PR NF EN 3357 (08/2018)

    Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D = 150 mm - 1 200 MPa = Rm = 1 400 MPa
    8/24/2018 - Paper - French - AFNOR
    Learn More
    €43.95

  • SAE J 2609:2018-08-24

    Multi-Dimensional Thermal Properties of Insulated Heat Shield Material Systems (Stabilized: Aug 2018)
    8/24/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 3201M:2018-08-23

    Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 35 - 45
    8/23/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 3202N:2018-08-23

    Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 55-65
    8/23/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 3205N:2018-08-23

    Synthetic Rubber Low-Temperature Resistant 45-55
    8/23/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6360P:2018-08-22

    Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved
    8/22/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6428L:2018-08-22

    Steel, Bars, Forgings, and Tubing 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C) (4335 Mod)
    8/22/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6429J:2018-08-22

    Steel Bars, Forgings, Tubing, and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Consumable Electrode Vacuum Melted
    8/22/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5850E:2018-08-22

    Steel, Corrosion and Heat-Resistant, Honeycomb Core Resistance Welded, Square Cell
    8/22/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5366F:2018-08-22

    Steel, Corrosion and Heat-Resistant, Investment Castings 25Cr - 20Ni (CK-20) As-Cast
    8/22/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5368E:2018-08-22

    Steel, Corrosion-Resistant, Investment Casings 15Cr - 4.0Ni - 2.3Mo - 0.09N Solution Heat Treated
    8/22/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE ARP 1947C:2018-08-22

    Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Allow Castings, Determination and Acceptance of
    8/22/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4918P:2018-08-22

    Titanium Alloy, Sheet, Strip, and Plate 6Al - 6V - 2Sn Annealed
    8/22/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 7322G:2018-08-22

    Rings, Sealing, Cast Tin Bronze 80Cu - 19Sn As Cast
    8/22/2018 - PDF - English - SAE
    Learn More
    €71.00

  • PR NF L11-007, PR NF EN 2400 (08/2018)

    Aerospace series - Heat resisting nickel base alloy Ni-P96-HT - Cold drawn and precipitation treated - Wires D < or = 10 mm
    8/20/2018 - Paper - French - AFNOR
    Learn More
    €43.95

  • SAE AMS 5903C:2018-08-17

    Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
    8/17/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5904C:2018-08-17

    Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (302) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength
    8/17/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5617K:2018-08-17

    Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 8.5Ni - 1.2Ti - 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
    8/17/2018 - PDF - English - SAE
    Learn More
    €71.00

  • PR NF L10-618, PR NF EN 3315 (08/2018)

    Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - De = 75 mm
    8/17/2018 - Paper - French - AFNOR
    Learn More
    €43.95

  • SAE AMS 5670G:2018-08-17

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation-Hardenable
    8/17/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5661G:2018-08-17

    Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consumable Electrode or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated
    8/17/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5893C:2018-08-16

    Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8 (Cb + Ta)(Nb + Ta) - 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
    8/16/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5383F:2018-08-16

    Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.60Al - 18Fe Vacuum Melted Homogenization and Solution Heat Treated
    8/16/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4674H:2018-08-16

    Nickel - Copper Alloy, Corrosion-Resistant, Bars and Forgings 67Ni - 30Cu - 0.04S Free Machining
    8/16/2018 - PDF - English - SAE
    Learn More
    €71.00

  • NF L09-078, NF EN 9278 (08/2018)

    Aerospace series - General Principles of Obsolescence Management of chemicals, materials and processes
    8/15/2018 - Paper - English, French - AFNOR
    Learn More
    €104.89

  • SAE AMS 5907C:2018-08-15

    Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 12Ni - 2.5Mo (316) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
    8/15/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5910C:2018-08-15

    Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength
    8/15/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5354G:2018-08-15

    Steel, Corrosion and Heat Resistant, Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered to 32 - 38 HRC
    8/15/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5360G:2018-08-15

    Steel, Corrosion and Heat-Resistant, Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat Treated
    8/15/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5364D:2018-08-15

    Steel, Corrosion and Heat-Resistant, Investment Castings 19.5Cr - 10.5Ni - 0.65Cb (Nb) (CF-8C) Solution Heat Treated
    8/15/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 5370E:2018-08-15

    Steel, Corrosion and Heat-Resistant, Investment Castings 19Cr - 9.5Ni (CF-3) Solution Heat Treated
    8/15/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6382R:2018-08-14

    Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed
    8/14/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 6322R:2018-08-14

    Steel Bars, Forgings, and Rings 0.50Cr – 0.55Ni – 0.25Mo (0.38 – 0.43C) (SAE 8740)
    8/14/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4459B:2018-08-14

    Aluminum Alloy, Extrusion 2.7Cu - 1.8Li - 0.7Zn - 0.3Mn - 0.3Mg - 0.08Zr (2099-T81) Solution Heat Treated, Stress Relieved by Stretching 1 to 3% and Aged
    8/14/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 4232D:2018-08-14

    Aluminum Alloy Extrusions 2.7Cu - 2.2Li - 0.12Zr (2090-T86) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
    8/14/2018 - PDF - English - SAE
    Learn More
    €71.00

  • SAE AMS 7819E:2018-08-14

    Molybdenum Alloy Bars 0.48Ti - 0.09Zr - 0.02C Arc Cast, Stress Relieved
    8/14/2018 - PDF - English - SAE
    Learn More
    €71.00

  • BS EN 2541:2018

    Aerospace series. Steel FE-PA18. Quenched and cold drawn. Wire for spring. D 4,0 mm
    8/9/2018 - Paper - English - BSI
    Learn More
    €118.32

  • BS EN 2796:2018

    Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 60 IRHD
    8/9/2018 - Paper - English - BSI
    Learn More
    €118.32

  • PR NF L10-723, PR NF EN 2540 (08/2018)

    Aerospace series - Steel X7CrNiAl17-7 (1.4568) - Air melted - Solution treated and precipitation hardened - Sheet and strip - a = 6 mm - 1 240 MPa = Rm = 1 450 MPa
    8/8/2018 - Paper - French - AFNOR
    Learn More
    €43.95

Items 1 to 200 of 7682 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 39