Call +33 (1) 40 02 03 05

33.120.20 : Wires and symmetrical cables

Items 1 to 200 of 441 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  • IEC 61156-11 (2019-05)

    IEC 61156-11:2019 Multicore and symmetrical pair/quad cables for digital communications - Part 11: Symmetrical single pair cables with transmission characteristics up to 600 MHz - Horizontal floor wiring - Sectional specification
    5/6/2019 - PDF - English - CEI
    Learn More
    €142.00

  • IEC/TR 62839-2 (2019-01)

    IEC TR 62839-2:2019 Environmental declaration - Part 2: Optical/copper telecom accessories products specific rules
    1/29/2019 - PDF - English - CEI
    Learn More
    €71.00

  • IEC 62783-2 (2019-01)

    IEC 62783-2:2019 Twinax cables for digital communications - Part 2: Family specification – Cable for Ethernet-over-twinax physical interfaces
    1/24/2019 - PDF - English, French - CEI
    Learn More
    €71.00

  • IEC 62783-1 (2019-01)

    IEC 62783-1:2019 Twinax cables for digital communications - Part 1: Generic specification
    1/24/2019 - PDF - English - CEI
    Learn More
    €102.00

  • BS IEC 61156-1-4:2018

    Multicore and symmetrical pair/quad cables for digital communications. Assessment of conductor heating in bundled cables due to the deployment of remote powering
    10/18/2018 - PDF - English - BSI
    Learn More
    €144.90

  • IEC 61156-1-4 (2018-10)

    IEC 61156-1-4:2018 Multicore and symmetrical pair/quad cables for digital communications - Part 1-4: Assessment of conductor heating in bundled cables due to the deployment of remote powering
    10/11/2018 - PDF - English - CEI
    Learn More
    €102.00

  • UNE-EN IEC 62680-1-3:2018

    Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification (Endorsed by Asociación Española de Normalización in September of 2018.)
    9/1/2018 - PDF - English - AENOR
    Learn More
    €233.00

  • UNE-EN IEC 62680-1-4:2018

    Universal Serial Bus interfaces for data and power - Part 1-4: Common Components - USB Type-CT Authentication Specification (Endorsed by Asociación Española de Normalización in July of 2018.)
    7/1/2018 - PDF - English - AENOR
    Learn More
    €277.00

  • IEC 60189-1 (2018-06)

    IEC 60189-1:2018 Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
    6/22/2018 - PDF - English - CEI
    Learn More
    €102.00

  • IEC 60189-1 Redline version (2018-06)

    IEC 60189-1:2018 RLV Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
    6/22/2018 - PDF - English - CEI
    Learn More
    €132.00

  • NF C93-537-1-1, NF EN 50289-1-1 (06/2018)

    Communication cables - Specifications for test methods - Part 1-1 : electrical test methods - General requirements
    6/9/2018 - PDF - French - UTE
    Learn More
    €91.08

  • NF C93-537-1-1, NF EN 50289-1-1 (06/2018)

    Communication cables - Specifications for test methods - Part 1-1 : electrical test methods - General requirements
    6/9/2018 - PDF - English - UTE
    Learn More
    €91.08

  • NF C93-537-1-8, NF EN 50289-1-8 (06/2018)

    Communication cables - Specifications for test methods - Part 1-8 : electrical test methods - Attenuation
    6/9/2018 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-537-1-8, NF EN 50289-1-8 (06/2018)

    Communication cables - Specifications for test methods - Part 1-8 : electrical test methods - Attenuation
    6/9/2018 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-537-1-9, NF EN 50289-1-9 (06/2018)

    Communication cables - Specifications for test methods - Part 1-9 : electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL)
    6/9/2018 - PDF - French - UTE
    Learn More
    €91.08

  • NF C93-537-1-9, NF EN 50289-1-9 (06/2018)

    Communication cables - Specifications for test methods - Part 1-9 : electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL)
    6/9/2018 - PDF - English - UTE
    Learn More
    €91.08

  • IEC 62680-1-3 (2018-05)

    IEC 62680-1-3:2018 Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C™ Cable and Connector Specification
    5/24/2018 - PDF - English - CEI
    Learn More
    €355.00

  • IEC 62680-1-3 (2018-05)

    IEC 62680-1-3:2018 Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C™ Cable and Connector Specification
    5/24/2018 - PDF - English, French - CEI
    Learn More
    €355.00

  • NF C93-542-4-2, NF EN 50288-4-2 (04/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 4-2 : sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables
    4/14/2018 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-542-4-1, NF EN 50288-4-1 (04/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 4-1 : sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables
    4/14/2018 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-542-4-2, NF EN 50288-4-2 (04/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 4-2 : sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables
    4/14/2018 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-542-4-1, NF EN 50288-4-1 (04/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 4-1 : sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables
    4/14/2018 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-542-3-2, NF EN 50288-3-2 (03/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 3-2 : sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables
    3/7/2018 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-542-3-1, NF EN 50288-3-1 (03/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 3-1 : sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables
    3/7/2018 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-542-2-2, NF EN 50288-2-2 (03/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 2-2 : sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables
    3/7/2018 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-542-2-1, NF EN 50288-2-1 (03/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 2-1 : sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables
    3/7/2018 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-542-3-2, NF EN 50288-3-2 (03/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 3-2 : sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables
    3/7/2018 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-542-3-1, NF EN 50288-3-1 (03/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 3-1 : sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables
    3/7/2018 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-542-2-2, NF EN 50288-2-2 (03/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 2-2 : sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables
    3/7/2018 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-542-2-1, NF EN 50288-2-1 (03/2018)

    Multi-element metallic cables used in analogue and digital communication and control - Part 2-1 : sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables
    3/7/2018 - PDF - English - UTE
    Learn More
    €77.83

  • UNE-EN 62680-1-3:2017

    Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification (Endorsed by Asociación Española de Normalización in February of 2018.)
    2/1/2018 - PDF - English - AENOR
    Learn More
    €262.00

  • IEC 62807-1 (2017-09)

    IEC 62807-1:2017 Hybrid telecommunication cables - Part 1: Generic specification
    9/6/2017 - PDF - English, French - CEI
    Learn More
    €20.00

  • UNE-EN 50289-1-1:2017

    Communication cables - Specifications for test methods - Part 1-1: Electrical test methods - General requirements
    9/6/2017 - PDF - Spanish - AENOR
    Learn More
    €55.00

  • UNE-EN 50289-1-9:2017

    Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL)
    9/6/2017 - PDF - Spanish - AENOR
    Learn More
    €55.00

  • UNE-EN 50289-1-8:2017

    Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation
    9/6/2017 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN 50289-1-11:2017

    Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss
    6/14/2017 - PDF - Spanish - AENOR
    Learn More
    €61.00

  • BS EN 50289-1-1:2017

    Communication cables. Specifications for test methods. Electrical test methods. General requirements
    3/31/2017 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN 50298-1-8:2017

    Communication cables. Specifications for test methods. Electrical test methods. Attenuation
    3/31/2017 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 50289-1-9:2017

    Communication cables. Specifications for test methods. Electrical test methods. Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL)
    3/31/2017 - PDF - English - BSI
    Learn More
    €202.40

  • NF C93-537-1-11, NF EN 50289-1-11 (03/2017)

    Communication cables - Specifications for test methods - Part 1-11 : electrical test methods - Characteristic impedance, input impedance, return loss
    3/8/2017 - PDF - French - UTE
    Learn More
    €112.42

  • NF C93-537-1-11, NF EN 50289-1-11 (03/2017)

    Communication cables - Specifications for test methods - Part 1-11 : electrical test methods - Characteristic impedance, input impedance, return loss
    3/8/2017 - PDF - English - UTE
    Learn More
    €112.42

  • EIA TSB 184-A:2017

    Guidelines for Supporting Power Delivery Over Balanced Twisted-Pair Cabling
    3/1/2017 - PDF sécurisé - English - EIA
    Learn More
    €90.64

  • NF C93-537-3-8, NF EN 50289-3-8 (02/2017)

    Communication cables - Specifications for test methods - Part 3-8 : mechanical test methods - Abrasion resistance of cable sheath markings
    2/18/2017 - PDF - French - UTE
    Learn More
    €48.40

  • NF C93-537-3-8, NF EN 50289-3-8 (02/2017)

    Communication cables - Specifications for test methods - Part 3-8 : mechanical test methods - Abrasion resistance of cable sheath markings
    2/18/2017 - PDF - English - UTE
    Learn More
    €48.40

  • NF C93-542-5-2, NF EN 50288-5-2 (02/2017)

    Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables
    2/11/2017 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-542-5-1, NF EN 50288-5-1 (02/2017)

    Multi-element metallic cables used in analogue and digital communication and control - Part 5-1 : sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables
    2/11/2017 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-542-6-2, NF EN 50288-6-2 (02/2017)

    Multi-element metallic cables used in analogue and digital communication and control - Part 6-2 : sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables
    2/11/2017 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-542-6-1, NF EN 50288-6-1 (02/2017)

    Multi-element metallic cables used in analogue and digital communication and control - Part 6-1 : sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables
    2/11/2017 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-542-6-2, NF EN 50288-6-2 (02/2017)

    Multi-element metallic cables used in analogue and digital communication and control - Part 6-2 : sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables
    2/11/2017 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-542-6-1, NF EN 50288-6-1 (02/2017)

    Multi-element metallic cables used in analogue and digital communication and control - Part 6-1 : sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables
    2/11/2017 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-542-5-2, NF EN 50288-5-2 (02/2017)

    Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables
    2/11/2017 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-542-5-1, NF EN 50288-5-1 (02/2017)

    Multi-element metallic cables used in analogue and digital communication and control - Part 5-1 : sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables
    2/11/2017 - PDF - English - UTE
    Learn More
    €77.83

  • VG 96927-5:2017-01

    Cable assemblies - Part 5: Assignment of cables, insulated wires, tools, wire stripping length, sealing plug, torques and recommended screw, interface standard; Text in German and English
    1/1/2017 - PDF - English, German - DIN
    Learn More
    €202.30

  • VG 96927-5 Beiblatt 1:2017-01

    Cable assemblies - Part 5: Assignment of cables, insulated wires, tools, wire stripping length, sealing plug, torques and recommended screw; Supplement 1: Assignment recommendations of cables to other single elements and assignment recommendations of stripping tools to cables and insulated wires; Text in German and English
    1/1/2017 - PDF - English, German - DIN
    Learn More
    €96.00

  • UNE-EN 62680-1-3:2016

    Universal serial bus interfaces for data and power - Part 1-3: Universal Serial Bus interfaces - Common components - USB Type-CTM cable and connector specification (Endorsed by Asociación Española de Normalización in January of 2017.)
    1/1/2017 - PDF - English - AENOR
    Learn More
    €199.00

  • NF C93-540-2-20, NF EN 50290-2-20 (12/2016)

    Communication cables - Part 2-20 : common design rules and construction - General
    12/23/2016 - PDF - French - UTE
    Learn More
    €63.42

  • NF C93-540-2-20, NF EN 50290-2-20 (12/2016)

    Communication cables - Part 2-20 : common design rules and construction - General
    12/23/2016 - PDF - English - UTE
    Learn More
    €63.42

  • NF C93-540-2-29, NF EN 50290-2-29 (12/2016)

    Communication cables - Part 2-29 : common design rules and construction - Crosslinked polyethylene insulation compounds : instrumentation, control and field bus cables
    12/9/2016 - PDF - French - UTE
    Learn More
    €91.08

  • NF C93-540-2-29, NF EN 50290-2-29 (12/2016)

    Communication cables - Part 2-29 : common design rules and construction - Crosslinked polyethylene insulation compounds : instrumentation, control and field bus cables
    12/9/2016 - PDF - English - UTE
    Learn More
    €91.08

  • PD IEC/TR 61156-1-6:2016

    Multicore and symmetrical pair/quad cables for digital communications. Nominal DC-resistance values of floor-wiring and work-area cables for digital communications
    9/30/2016 - PDF - English - BSI
    Learn More
    €144.90

  • IEC/TR 61156-1-6 (2016-09)

    IEC TR 61156-1-6:2016 Multicore and symmetrical pair/quad cables for digital communications - Part 1-6: Nominal DC-resistance values of floor-wiring and work-area cables for digital communications
    9/6/2016 - PDF - English - CEI
    Learn More
    €41.00

  • NF C93-542-10-2, NF EN 50288-10-2 (07/2016)

    Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
    7/8/2016 - PDF - French - UTE
    Learn More
    €91.08

  • NF C93-542-10-2, NF EN 50288-10-2 (07/2016)

    Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
    7/8/2016 - PDF - English - UTE
    Learn More
    €91.08

  • BS IEC 61156-9:2016

    Multicore and symmetrical pair/quad cables for digital communications. Cables for channels with transmission characteristics up to 2 GHz. Sectional specification
    4/30/2016 - PDF - English - BSI
    Learn More
    €144.90

  • BS IEC 61156-10:2016

    Multicore and symmetrical pair/quad cables for digital communications. Cables for cords with transmission characteristics up to 2 GHz. Sectional specification
    4/30/2016 - PDF - English - BSI
    Learn More
    €144.90

  • IEC 61156-10 (2016-04)

    IEC 61156-10:2016 Multicore and symmetrical pair/quad cables for digital communications - Part 10: Cables for cords with transmission characteristics up to 2 GHz - Sectional specification
    4/20/2016 - PDF - English - CEI
    Learn More
    €102.00

  • IEC 61156-9 (2016-04)

    IEC 61156-9:2016 Multicore and symmetrical pair/quad cables for digital communications - Part 9: Cables for channels with transmission characteristics up to 2 GHz - Sectional specification
    4/20/2016 - PDF - English - CEI
    Learn More
    €102.00

  • BS EN 62680-1-1:2015

    Universal Serial Bus interfaces for data and power. Universal Serial Bus interfaces. Common components. USB Battery Charging Specification, Revision 1.2 (TA 14)
    2/29/2016 - PDF - English - BSI
    Learn More
    €282.90

  • UNE-EN 50289-1-17:2016

    Communication cables - Specifications for test methods - Part 1-17: Electrical test methods - Exogenous Crosstalk ExNEXT and ExFEXT
    2/17/2016 - PDF - Spanish - AENOR
    Learn More
    €36.00

  • NF C93-542-9-2, NF EN 50288-9-2 (01/2016)

    Multi-element metallic cables used in analogue and digital communication and control - Part 9-2 : sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications
    1/23/2016 - PDF - French - UTE
    Learn More
    €91.08

  • NF C93-542-9-2, NF EN 50288-9-2 (01/2016)

    Multi-element metallic cables used in analogue and digital communication and control - Part 9-2 : sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications
    1/23/2016 - PDF - English - UTE
    Learn More
    €91.08

  • ANSI/SCTE 34:2016

    Test Method for Cored Depth Verification
    1/1/2016 - PDF sécurisé - English - SCTE
    Learn More
    €45.00

  • ANSI/VITA 76:2016

    High Performance Cable Standard
    1/1/2016 - PDF - English - VITA
    Learn More
    €56.25

  • NF C93-542-1, NF EN 50288-1 (12/2015)

    Multi-element metallic cables used in analogue and digital communication and control - Part 1 : generic spécification
    12/4/2015 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-542-1, NF EN 50288-1 (12/2015)

    Multi-element metallic cables used in analogue and digital communication and control - Part 1 : generic spécification
    12/4/2015 - PDF - English - UTE
    Learn More
    €77.83

  • UNE-EN 50288-10-2:2015

    Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
    11/18/2015 - PDF - Spanish - AENOR
    Learn More
    €50.00

  • UNE-EN 50288-9-2:2015

    Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications
    11/18/2015 - PDF - Spanish - AENOR
    Learn More
    €50.00

  • UNE-EN 50288-11-2:2015

    Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
    11/18/2015 - PDF - Spanish - AENOR
    Learn More
    €50.00

  • BS EN 50288-9-2:2015

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications
    9/30/2015 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 50288-10-2:2015

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
    9/30/2015 - PDF - English - BSI
    Learn More
    €144.90

  • IEC 62680-2-1 (2015-09)

    IEC 62680-2-1:2015 Universal serial bus interfaces for data and power - Part 2-1: Universal Serial Bus Specification, Revision 2.0
    9/15/2015 - CD-Rom - English - CEI
    Learn More
    €355.00

  • IEC 62680-2-1 (2015-09)

    IEC 62680-2-1:2015 Universal serial bus interfaces for data and power - Part 2-1: Universal Serial Bus Specification, Revision 2.0
    9/15/2015 - PDF - English, French - CEI
    Learn More
    €355.00

  • IEC 62680-1-1 (2015-09)

    IEC 62680-1-1:2015 Universal serial bus interfaces for data and power - Part 1-1: Common components - USB Battery Charging Specification, Revision 1.2
    9/9/2015 - PDF - English - CEI
    Learn More
    €305.00

  • IEC 62680-2-2 (2015-09)

    IEC 62680-2-2:2015 Universal serial bus interfaces for data and power - Part 2-2: Micro-USB Cables and Connectors Specification, Revision 1.01
    9/9/2015 - PDF - English - CEI
    Learn More
    €274.00

  • IEC 62680-2-3 (2015-09)

    IEC 62680-2-3:2015 Universal serial bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document Revision 2.0
    9/9/2015 - PDF - English - CEI
    Learn More
    €244.00

  • IEC 62680-2-3 (2015-09)

    IEC 62680-2-3:2015 Universal serial bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document Revision 2.0
    9/9/2015 - PDF - English, French - CEI
    Learn More
    €244.00

  • IEC 62680-2-2 (2015-09)

    IEC 62680-2-2:2015 Universal serial bus interfaces for data and power - Part 2-2: Micro-USB Cables and Connectors Specification, Revision 1.01
    9/9/2015 - PDF - English, French - CEI
    Learn More
    €274.00

  • DIN EN 62783-2:2015-08

    Twinax cables for digital communications - Part 2: Cable for ethernet-over-twinax physical interfaces (IEC 46C/1013/CD:2015)
    8/1/2015 - PDF - English, German - DIN
    Learn More
    €82.60

  • NF C93-587-2-20, NF EN 61935-2-20 (06/2015)

    Testing of balanced communication cabling in accordance with EN 50173- Part 2-20 : patch cords and work area cords - Blank detail specification for class D applications
    6/20/2015 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-540-4-1, NF EN 50290-4-1 (05/2015)

    Communication cables - Part 4-1 : general considerations for the use of cables - Environmental conditions and safety aspects
    5/1/2015 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-540-4-1, NF EN 50290-4-1 (05/2015)

    Communication cables - Part 4-1 : general considerations for the use of cables - Environmental conditions and safety aspects
    5/1/2015 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-589-2, NF EN 50601 (02/2015)

    Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Unscreened straight patch cords and straight work area cords for class D applications - Detail specification
    2/7/2015 - PDF - French - UTE
    Learn More
    €63.42

  • NF C93-589-3, NF EN 50602 (02/2015)

    Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Unscreened straight patch cords and straight work area cords for class E applications - Detail specification
    2/7/2015 - PDF - French - UTE
    Learn More
    €63.42

  • NF C93-589-4, NF EN 50603 (02/2015)

    Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Screened straight patch cords and straight work area cords for class E applications - Detail specification
    2/7/2015 - PDF - French - UTE
    Learn More
    €63.42

  • NF C93-589-2, NF EN 50601 (02/2015)

    Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Unscreened straight patch cords and straight work area cords for class D applications - Detail specification
    2/7/2015 - PDF - English - UTE
    Learn More
    €63.42

  • NF C93-589-3, NF EN 50602 (02/2015)

    Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Unscreened straight patch cords and straight work area cords for class E applications - Detail specification
    2/7/2015 - PDF - English - UTE
    Learn More
    €63.42

  • NF C93-589-4, NF EN 50603 (02/2015)

    Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Screened straight patch cords and straight work area cords for class E applications - Detail specification
    2/7/2015 - PDF - English - UTE
    Learn More
    €63.42

  • IEEE 400.4:2015

    IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage
    1/1/2015 - PDF - English - IEEE
    Learn More
    €73.26

  • UNE 212016:2014

    Multi-element metallic cables used in data communication for voltages up to and including 250 V.
    12/10/2014 - PDF - Spanish - AENOR
    Learn More
    €46.00

  • DIN EN 50407-3 VDE 0819-407-3:2014-12

    Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP; German version EN 50407-3:2014
    12/1/2014 - Paper - German - VDE
    Learn More
    €53.63

  • DIN EN 50407-3 VDE 0819-407-3:2014-12

    Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP; German version EN 50407-3:2014
    12/1/2014 - Paper - English - VDE
    Learn More
    €88.94

  • PD IEC/TR 62839-1:2014

    Environmental declaration. Wires, cables and accessory products. Specific rules
    11/30/2014 - PDF - English - BSI
    Learn More
    €144.90

  • PR NF C93-587-2-24, PR NF EN 61935-2-24 (11/2014)

    Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-24 : cord and work area cord category 7A - Blank detail specification
    11/21/2014 - Paper - French - AFNOR
    Learn More
    €44.39

  • IEC/TR 62839-1 (2014-11)

    IEC TR 62839-1:2014 Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules
    11/6/2014 - PDF - English - CEI
    Learn More
    €71.00

  • DIN IEC/TR 61156-1-6 VDE 0819-1016:2014-10

    Multicore and symmetrical pair/quad cables for digital communications - Part 1-6: Exploratory DC-resistance values of floor-wiring and work-area cables for digital communications (IEC 46C/999/CD:2014)
    10/1/2014 - Paper - German - VDE
    Learn More
    €16.21

  • IEC/TR 61156-1-2 Edition 1.1 (2014-09)

    IEC TR 61156-1-2:2009+AMD1:2014 consolidated version Multicore and symmetrical pair/quad cables for digital communications - Part 1-2: Electrical transmission characteristicsand test methods of symmetrical pair/quad cables
    9/30/2014 - PDF - English - CEI
    Learn More
    €558.00

  • IEC/TR 61156-1-2 AMD 1 (2014-09)

    IEC TR 61156-1-2:2009/AMD1:2014 Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/quad cables
    9/30/2014 - PDF - English - CEI
    Learn More
    €173.00

  • NF C93-502-3, NF EN 50407-3 (09/2014)

    Multi-pair cables used in high bit rate digital access telecommunication networks - Part 3 : indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP
    9/27/2014 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-502-3, NF EN 50407-3 (09/2014)

    Multi-pair cables used in high bit rate digital access telecommunication networks - Part 3 : indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP
    9/27/2014 - PDF - English - UTE
    Learn More
    €77.83

  • UNE-EN 50407-3:2014

    Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP (Endorsed by AENOR in July of 2014.)
    7/1/2014 - PDF - English - AENOR
    Learn More
    €68.00

  • BS EN 50407-3:2014

    Multi-pair cables used in high bit rate digital access telecommunications networks. Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP
    6/30/2014 - PDF - English - BSI
    Learn More
    €144.90

  • NF C93-557-5, NF EN 62037-5 (05/2014)

    Passive RF and microwave devices, intermodulation level measurement - Part 5 : measurement of passive intermodulation in filters
    5/2/2014 - PDF - French - UTE
    Learn More
    €77.83

  • BS EN 62680-4:2014

    Universal serial bus interfaces for data and power. Universal Serial Bus Cables and Connectors Class Document, Revision 2.0
    4/30/2014 - PDF - English - BSI
    Learn More
    €257.60

  • DIN IEC 61156-9 VDE 0819-1009:2014-04

    Multicore and symmetrical pair/quad cables for digital communications - Part 9: Cables for horizontal floor wiring with transmission characteristics up to 2 GHz - Sectional specification (IEC 46C/989/CD:2013)
    4/1/2014 - Paper - German - VDE
    Learn More
    €20.45

  • DIN IEC 61156-10 VDE 0819-1010:2014-04

    Multicore and symmetrical pair/quad cables for digital communications - Part 10: Cables for work area wiring with transmission characteristics up to 2 GHz - Sectional specification (IEC 46C/990/CD:2013)
    4/1/2014 - Paper - German - VDE
    Learn More
    €20.45

  • DIN EN 50288-2-2 VDE 0819-2-2:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables; German version EN 50288-2-2:2013
    3/1/2014 - Paper - German - VDE
    Learn More
    €53.63

  • DIN EN 50288-3-1 VDE 0819-3-1:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables; German version EN 50288-3-1:2013
    3/1/2014 - Paper - German - VDE
    Learn More
    €53.63

  • DIN EN 50288-3-2 VDE 0819-3-2:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables; German version EN 50288-3-2:2013
    3/1/2014 - Paper - German - VDE
    Learn More
    €53.63

  • DIN EN 50288-4-2 VDE 0819-4-2:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables; German version EN 50288-4-2:2013
    3/1/2014 - Paper - German - VDE
    Learn More
    €53.63

  • DIN EN 50288-5-1 VDE 0819-5-1:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables; German version EN 50288-5-1:2013
    3/1/2014 - Paper - German - VDE
    Learn More
    €53.63

  • DIN EN 50288-5-2 VDE 0819-5-2:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables; German version EN 50288-5-2:2013
    3/1/2014 - Paper - German - VDE
    Learn More
    €53.63

  • DIN EN 50288-3-2 VDE 0819-3-2:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables; German version EN 50288-3-2:2013
    3/1/2014 - Paper - English - VDE
    Learn More
    €88.94

  • DIN EN 50288-2-2 VDE 0819-2-2:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables; German version EN 50288-2-2:2013
    3/1/2014 - Paper - English - VDE
    Learn More
    €88.94

  • DIN EN 50288-4-2 VDE 0819-4-2:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables; German version EN 50288-4-2:2013
    3/1/2014 - Paper - English - VDE
    Learn More
    €88.94

  • DIN EN 50288-5-1 VDE 0819-5-1:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables; German version EN 50288-5-1:2013
    3/1/2014 - Paper - English - VDE
    Learn More
    €88.94

  • DIN EN 50288-5-2 VDE 0819-5-2:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables; German version EN 50288-5-2:2013
    3/1/2014 - Paper - English - VDE
    Learn More
    €88.94

  • DIN EN 50288-3-1 VDE 0819-3-1:2014-03

    Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables; German version EN 50288-3-1:2013
    3/1/2014 - Paper - English - VDE
    Learn More
    €88.94

  • BS EN 50288-4-2:2013

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterised up to 600 MHz. Work area and patch cord cables
    2/28/2014 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 50288-5-1:2013

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 250 MHz. Horizontal and building backbone cables
    2/28/2014 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 50288-5-2:2013

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 250 MHz. Work area and patch cord cables
    2/28/2014 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 50288-6-1:2013

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterised up to 250 MHz. Horizontal and building backbone cables
    2/28/2014 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 50288-6-2:2013

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterised up to 250 MHz. Work area and patch cord cables
    2/28/2014 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 62680-2:2013

    Universal serial bus interfaces for data and power. Universal serial bus. Micro-USB cables and connectors specification, revision 1.01
    2/28/2014 - PDF - English - BSI
    Learn More
    €257.60

  • UNE-EN 50288-5-2:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 50288-5-1:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 50288-6-1:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €50.00

  • UNE-EN 50288-6-2:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 50288-1:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN 50288-2-1:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 50288-2-2:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 50288-3-2:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 50288-4-1:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 50288-4-2:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 50288-3-1:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €50.00

  • BS EN 62680-3:2013

    Universal serial bus interfaces for data and power. USB battery charging specification, Revision 1.2
    10/31/2013 - PDF - English - BSI
    Learn More
    €282.90

  • BS EN 50288-2-1:2013

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterised up to 100 MHz. Horizontal and building backbone cables
    9/30/2013 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 50288-2-2:2013

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterised up to 100 MHz. Work area and patch cord cables
    9/30/2013 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 50288-3-1:2013

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterised up to 100 MHz. Horizontal and building backbone cables
    9/30/2013 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 50288-3-2:2013

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterised up to 100 MHz. Work area and patch cord cables
    9/30/2013 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 50288-4-1:2013

    Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterised up to 600 MHz. Horizontal and building backbone cables
    9/30/2013 - PDF - English - BSI
    Learn More
    €144.90

  • DIN EN 62783-1:2013-08

    Twinax cables for digital communications - Part 1: Generic specification (IEC 46C/980/CD:2013)
    8/1/2013 - PDF - English, German - DIN
    Learn More
    €89.00

  • PD IEC/TR 61156-1-5:2013

    Multicore and symmetrical pair/quad cables for digital communications. Correction procedures for the measurement results of return loss and input impedance
    7/31/2013 - PDF - English - BSI
    Learn More
    €202.40

  • IEC/TR 61156-1-5 (2013-06)

    IEC TR 61156-1-5:2013 Multicore and symmetrical pair/quad cables for digital communications - Part 1-5: Correction procedures for the measurement results of return loss and input impedance
    6/25/2013 - PDF - English - CEI
    Learn More
    €142.00

  • IEC 61156-8 Edition 1.1 (2013-05)

    IEC 61156-8:2009+AMD1:2013 consolidated version Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification
    5/28/2013 - PDF - English - CEI
    Learn More
    €152.00

  • IEC 61156-8 AMD 1 (2013-05)

    IEC 61156-8:2009/AMD1:2013 Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification
    5/28/2013 - PDF - English - CEI
    Learn More
    €10.00

  • PD IEC/TR 62222:2012

    Fire performance of communication cables installed in buildings
    4/30/2013 - PDF - English - BSI
    Learn More
    €257.60

  • UNE-EN 50288-9-1:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 9-1: Sectional specification for screened cables characterised up to 1 000 MHz - Horizontal and building backbone cables
    4/30/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 50288-10-1:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 10-1: Sectional specification for screened cables characterized up to 500 MHz - Horizontal floor and building backbone cables
    4/30/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 50288-11-1:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz - Horizontal and building backbone cables
    4/30/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 50288-8:2013

    Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz
    4/30/2013 - PDF - Spanish - AENOR
    Learn More
    €45.00

  • ASTM B986-13e1

    Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
    4/1/2013 - PDF - English - ASTM
    Learn More
    €38.00

  • IEEE 400.2:2013

    IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz)
    1/1/2013 - PDF - English - IEEE
    Learn More
    €100.98

  • NEMA WC 66:2013

    Standard for Category 6 and 6A, 100 Ohm, Individually Unshielded Twisted Pairs, Indoor Cables (With or Without an Overall Shield) for Use in LAN Communication Wiring Systems
    1/1/2013 - PDF sécurisé - English - NEMA
    Learn More
    €80.08

  • IEC 61156-5 AMD 1 (2012-12)

    IEC 61156-5:2009/AMD1:2012 Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Sectional specification
    12/11/2012 - PDF - English - CEI
    Learn More
    €10.00

  • IEC 61156-5 Edition 2.1 (2012-12)

    IEC 61156-5:2009+AMD1:2012 consolidated version Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Horizontal floorwiring - Sectional specification
    12/11/2012 - PDF - English - CEI
    Learn More
    €203.00

  • IEC 61156-6 Edition 3.1 (2012-12)

    IEC 61156-6:2010+AMD1:2012 consolidated version Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Work area wiring -Sectional specification
    12/7/2012 - PDF - English - CEI
    Learn More
    €152.00

  • IEC 61156-6 AMD 1 (2012-12)

    IEC 61156-6:2010/AMD1:2012 Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Sectional specification
    12/7/2012 - PDF - English - CEI
    Learn More
    €10.00

  • IEC 61156-7 Edition 1.1 (2012-12)

    IEC 61156-7:2003+AMD1:2012 consolidated version Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmissioncharacteristics up to 1 200 MHz - Sectional specification fordigital and analog communication cables
    12/7/2012 - PDF - English, French - CEI
    Learn More
    €107.00

  • IEC 61156-7 AMD 1 (2012-12)

    IEC 61156-7:2003/AMD1:2012 Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Sectional specification for digital and analog communication cables
    12/7/2012 - PDF - English, French - CEI
    Learn More
    €10.00

  • CTA-803-B:2012 (R2017)

    Mobile Electronics Wiring Designations for Audio and Vehicle Security/Convenience
    11/1/2012 - PDF sécurisé - English - ANSI
    Learn More
    €46.00

  • DIN EN 50441-2 VDE 0815-2:2012-10

    Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1; German version EN 50441-2:2012
    10/1/2012 - Paper - German - VDE
    Learn More
    €61.54

  • DIN EN 50441-4 VDE 0815-4:2012-10

    Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3; German version EN 50441-4:2012
    10/1/2012 - Paper - German - VDE
    Learn More
    €61.54

  • DIN EN 50441-2 VDE 0815-2:2012-10

    Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1; German version EN 50441-2:2012
    10/1/2012 - Paper - English - VDE
    Learn More
    €102.07

  • DIN EN 50441-4 VDE 0815-4:2012-10

    Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3; German version EN 50441-4:2012
    10/1/2012 - Paper - English - VDE
    Learn More
    €102.07

  • DIN EN 50288-8 VDE 0819-8:2012-09

    Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz; German version EN 50288-8:2012
    9/1/2012 - Paper - German - VDE
    Learn More
    €45.89

  • DIN EN 50288-8 VDE 0819-8:2012-09

    Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz; German version EN 50288-8:2012
    9/1/2012 - Paper - English - VDE
    Learn More
    €76.11

  • IEC/TR 62222 (2012-07)

    IEC TR 62222:2012 Fire performance of communication cables installed in buildings
    7/4/2012 - PDF - English, French - CEI
    Learn More
    €244.00

  • PR NF C90-210-4, PR NF EN 50412-4 (05/2012)

    Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 4 : low rate wide band services (LRWBS) operating between 2 MHz and 4 MHz - Channel allocations
    5/28/2012 - PDF - French - UTE
    Learn More
    €54.48

  • EIA/TIA-758-B:2012

    Customer-Owned Outside Plant Telecommunications Infrastructure Standard
    3/27/2012 - PDF sécurisé - English - EIA
    Learn More
    €41.89

  • IEEE 1143:2012

    IEEE Guide on Shielding Practice for Low Voltage Cables
    1/1/2012 - PDF - English - IEEE
    Learn More
    €123.75

  • UNE-EN 50288-7:2011

    Multi-element metallic cables used in analogue and digital communication and control -- Part 7: Sectional specification for instrumentation and control cables
    11/23/2011 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • IEC/TR 61156-1-3 (2011-04)

    IEC TR 61156-1-3:2011 Multicore and symmetrical pair/quad cables for digital communications - Part 1-3: Electrical transmission parameters for modelling cable assemblies using symmetrical pair/quad cables
    4/7/2011 - PDF - English - CEI
    Learn More
    €173.00

  • JIS C 3662-7:2010 (R2015)

    Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
    10/20/2010 - PDF - Japanese - JSA
    Learn More
    €25.00

  • BS EN 61935-2:2010

    Specification for the testing of balanced and coaxial information technology cabling. Cords as specified in ISO/IEC 11801 and related standards
    9/30/2010 - PDF - English - BSI
    Learn More
    €236.90

  • UNE-EN 50289-1-12:2010

    Communication cables - Specifications for test methods -- Part 1-12: Electrical test methods - Inductance
    7/28/2010 - PDF - Spanish - AENOR
    Learn More
    €27.00

  • IEC 61935-2 (2010-07)

    IEC 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards
    7/12/2010 - PDF - English, French - CEI
    Learn More
    €173.00

  • IEC 61156-2-1 (2010-06)

    IEC 61156-2-1:2010 Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring - Blank detail specification
    6/28/2010 - PDF - English - CEI
    Learn More
    €71.00

  • BS EN 61935-3:2009

    Testing of balanced and coaxial information technology cabling. Installed cabling as specified in EN 50173-4 and related standards
    4/30/2010 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN 61935-2-20:2009

    Testing of balanced communication cabling in accordance with series EN 50173. Patch cords and work area cords. Blank detail specification for class D applications
    4/30/2010 - PDF - English - BSI
    Learn More
    €144.90

  • IEC 61156-2 (2010-04)

    IEC 61156-2:2010 Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification
    4/27/2010 - PDF - English - CEI
    Learn More
    €71.00

  • UNE-EN 50289-1-16:2010

    Communication cables - Specifications for test methods -- Part 1-16: Electromagnetic performance - Coupling attenuation of cable assemblies (Field conditions)
    3/30/2010 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • IEC 61156-6 (2010-01)

    IEC 61156-6:2010 Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Sectional specification
    1/21/2010 - PDF - English - CEI
    Learn More
    €102.00

  • DIN VDE 0816-1 Beiblatt 1 VDE 0816-1 Beiblatt 1:2009-12

    External cables for telecommunication and data processing systems - Cables insulated and sheathed with polyethylen, unit stranded - List of type designation for telecommunication cables
    12/1/2009 - Paper - German - VDE
    Learn More
    €38.31

  • IEC 61156-1 Edition 3.1 (2009-10)

    IEC 61156-1:2007+AMD1:2009 consolidated version Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
    10/14/2009 - PDF - English, French - CEI
    Learn More
    €355.00

  • IEC 61156-5-1 (2009-10)

    IEC 61156-5-1:2009 Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Blank detail specification
    10/14/2009 - PDF - English - CEI
    Learn More
    €41.00

  • IEC 61156-6-1 (2009-10)

    IEC 61156-6-1:2009 Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Blank detail specification
    10/14/2009 - PDF - English - CEI
    Learn More
    €41.00

  • NF C93-540-2-24/A1, NF EN 50290-2-24/A1 (09/2009)

    Communication cables - Part 2-24 : common design rules and construction - PE sheathing
    9/1/2009 - PDF - French - UTE
    Learn More
    €48.40

  • NF C93-540-2-24/A1, NF EN 50290-2-24/A1 (09/2009)

    Communication cables - Part 2-24 : common design rules and construction - PE sheathing
    9/1/2009 - PDF - English - UTE
    Learn More
    €48.40

  • IEC 61156-1 AMD 1 (2009-08)

    IEC 61156-1:2007/AMD1:2009 Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
    8/12/2009 - PDF - English, French - CEI
    Learn More
    €41.00

  • PD IEC/TR 61156-1-2:2009+A1:2014

    Multicore and symmetrical pair/quad cables for digital communications. Electrical transmission characteristics and test methods of symmetrical pair/quad cables
    7/31/2009 - PDF - English - BSI
    Learn More
    €303.60

Items 1 to 200 of 441 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3