Call +33 (1) 40 02 03 05

31.220.10 : Plug-and-socket devices. Connectors

Items 1 to 200 of 1401 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  • IEC 61076-3-124 (2019-03)

    IEC 61076-3-124:2019 Connectors for electrical and electronic equipment - Product requirements – Part 3-124: Rectangular connectors – Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz
    3/11/2019 - PDF - English, French - CEI
    Learn More
    €244.00

  • IEC 60512-99-002 (2019-03)

    IEC 60512-99-002:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load
    3/8/2019 - PDF - English, French - CEI
    Learn More
    €71.00

  • IEC 61076-1 Edition 2.1 (2019-01)

    IEC 61076-1:2006+AMD1:2019 consolidated version Connectors for electronic equipment - Product requirements - Part 1: Generic specification
    1/11/2019 - PDF - English, French - CEI
    Learn More
    €203.00

  • IEC 61076-1 AMD 1 (2019-01)

    IEC 61076-1:2006/AMD1:2019 Amendment 1 - Connectors for electronic equipment - Product requirements - Part 1: Generic specification
    1/11/2019 - PDF - English, French - CEI
    Learn More
    €20.00

  • DIN EN IEC 61076-3-119 VDE 0687-76-3-119:2018-12

    Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz (IEC 61076-3-119:2017); German version EN IEC 61076-3-119:2018
    12/1/2018 - Paper - German - VDE
    Learn More
    €98.49

  • VG 95319-1015:2018-11

    Electrical connectors and plug-and-socket devices - Part 1015: Metallic tie for termination of screening braids on the band adapter, detail standard; Text in German and English
    11/1/2018 - PDF - English, German - DIN
    Learn More
    €96.90

  • PD IEC PAS 60512-27-200:2018

    Connectors for electrical and electronic equipment. Tests and measurements. Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors. Tests 27a to 27g
    10/25/2018 - PDF - English - BSI
    Learn More
    €312.80

  • IEC 60512-1 (2018-10)

    IEC 60512-1:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
    10/22/2018 - PDF - English, French - CEI
    Learn More
    €71.00

  • IEC 60512-1 Redline version (2018-10)

    IEC 60512-1:2018 RLV Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
    10/22/2018 - PDF - English - CEI
    Learn More
    €92.00

  • IEC/PAS 60512-27-200 (2018-10)

    IEC PAS 60512-27-200:2018 Connecteurs for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests 27a to 27g
    10/19/2018 - PDF - English - CEI
    Learn More
    €325.00

  • DIN EN IEC 60512-8-3 VDE 0687-512-8-3:2018-10

    Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (IEC 60512-8-3:2018); German version EN IEC 60512-8-3:2018
    10/1/2018 - Paper - German - VDE
    Learn More
    €45.89

  • VG 95319-2/A1:2018-10

    Electrical connectors and plug-and-socket devices - Part 2: Generic standard; Amendment A1; Text in German and English
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €81.90

  • DIN EN IEC 60512-15-2 VDE 0687-512-15-2:2018-10

    Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (IEC 60512-15-2:2018); German version EN IEC 60512-15-2:2018
    10/1/2018 - Paper - German - VDE
    Learn More
    €42.45

  • DIN EN IEC 61076-2-111 VDE 0687-76-2-111:2018-10

    Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (IEC 61076-2-111:2017); German version EN IEC 61076-2-111:2018
    10/1/2018 - Paper - German - VDE
    Learn More
    €155.17

  • PR NF C93-406-8-101, PR NF EN 61076-8-101 (10/2018)

    Connectors for electronic equipment - Product requirements - Part 8-101 : power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 40 A
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €87.16

  • PR NF C93-406-8-102, PR NF EN 61076-8-102 (09/2018)

    Connectors for electronic equipment - Product requirements - Part 8-102 : power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 150 A
    9/28/2018 - Paper - French - AFNOR
    Learn More
    €87.16

  • PR NF C93-406-8-100, PR NF EN 61076-8-100 (09/2018)

    IEC 61076-8-100 Ed1: Connectors for electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 20 A
    9/24/2018 - Paper - French - AFNOR
    Learn More
    €87.16

  • DIN EN 60352-4:2018-09

    Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance (IEC 48B/2633/CD:2018); Text in German and English
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €147.20

  • DIN EN 60352-3:2018-09

    Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance (IEC 48B/2632/CD:2018); Text in German and English
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €119.60

  • VG 96513-5:2018-09

    Electrical connectors and plug-and-socket devices - Modular rectangular connector - Part 5: Contacts and contact inserts, detail standard; Text in German and English
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €104.40

  • DIN EN 60352-5:2018-08

    Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance (IEC 48B/2635/CD:2018); Text in German and English
    8/1/2018 - PDF - English, German - DIN
    Learn More
    €125.30

  • PR NF C93-400-23-3, PR NF EN 60512-23-3 (06/2018)

    Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories
    6/15/2018 - Paper - French - AFNOR
    Learn More
    €54.48

  • DIN EN 61076-3-104 VDE 0687-76-3-104:2018-06

    Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (IEC 61076-3-104:2017); German version EN 61076-3-104:2017
    6/1/2018 - Paper - German - VDE
    Learn More
    €169.34

  • BS IEC 62946-01:2018

    Connectors for electrical and electronic equipment. Rectangular connectors. Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carrying capacity up to 1 A
    6/1/2018 - PDF - English - BSI
    Learn More
    €202.40

  • IEC 62946-01 (2018-05)

    IEC 62946-01:2018 Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A
    5/24/2018 - PDF - English - CEI
    Learn More
    €173.00

  • PR NF C93-406-3-124, PR NF EN 61076-3-124 (04/2018)

    Connectors for electronic equipment - product requirements - Part 3-124: Rectangular connectors - Detail specification for 10way, shielded, free and fixed rectangular connectors for I/O and data transmission capability with frequencies up to 500 MHz.
    4/13/2018 - Paper - French - AFNOR
    Learn More
    €78.69

  • DIN EN 61076-3-125 VDE 0687-76-3-125:2018-04

    Connectors for electrical and electronic components - Product requirements - Part 3-125: Connectors - Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for transmission capability and power supply capability with frequencies up to 600 MHz (IEC 48B/2600/CD:2017); Text in German and English
    4/1/2018 - Paper - German - VDE
    Learn More
    €42.45

  • DIN EN 61076-3-122 VDE 0687-76-3-122:2018-04

    Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (IEC 61076-3-122:2017); German version EN 61076-3-122:2017
    4/1/2018 - Paper - German - VDE
    Learn More
    €91.70

  • UNE-EN IEC 61076-3-119:2018

    Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz (Endorsed by Asociación Española de Normalización in April of 2018.)
    4/1/2018 - PDF - English - AENOR
    Learn More
    €84.00

  • NF C93-586, NF EN 61726 (03/2018)

    Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
    3/28/2018 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-586, NF EN 61726 (03/2018)

    Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
    3/28/2018 - PDF - English - UTE
    Learn More
    €77.83

  • BS EN IEC 61076-3-119:2018

    Connectors for electrical and electronic equipment. Product requirements. Rectangular connectors. Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
    3/26/2018 - PDF - English - BSI
    Learn More
    €236.90

  • NF C93-400-15-2, NF EN IEC 60512-15-2 (03/2018)

    Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2 : connector tests (mechanical) - Test 15b : insert retention in housing (axial)
    3/23/2018 - PDF - English - UTE
    Learn More
    €63.42

  • NF C93-400-8-3, NF EN IEC 60512-8-3 (03/2018)

    Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3 : static load tests (fixed connectors) - Test 8c : robustness of actuating lever
    3/23/2018 - PDF - French - UTE
    Learn More
    €63.42

  • NF C93-400-8-3, NF EN IEC 60512-8-3 (03/2018)

    Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3 : static load tests (fixed connectors) - Test 8c : robustness of actuating lever
    3/23/2018 - PDF - English - UTE
    Learn More
    €63.42

  • VG 95324-10:2018-03

    Electrical connectors and plug-and-socket devices - connectors for printed boards - Part 10: Pin and socket connectors with circular contacts, detail standard; Text in German and English
    3/1/2018 - PDF - English, German - DIN
    Learn More
    €112.00

  • PD IEC/PAS 61076-3-126:2018

    Connectors for electrical and electronic equipment. Product requirements. Rectangular connectors. Detail specification for 5 pole power connectors for industrial environments with push-pull locking
    2/28/2018 - PDF - English - BSI
    Learn More
    €257.60

  • JIS C 5402-17-3:2018

    Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €32.50

  • PR NF C93-400-28-100, PR NF EN 60512-28-100 (02/2018)

    Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g
    2/19/2018 - Paper - French - AFNOR
    Learn More
    €87.16

  • PR NF C93-400-99-002, PR NF EN 60512-99-002 (02/2018)

    Connectors for electronic equipment - tests and measurements - Part 99-002 : Endurance test schedules - Test 99b, Test schedule for unintended unmating under electrical load
    2/19/2018 - Paper - French - AFNOR
    Learn More
    €54.48

  • PR NF C93-406-2-114, PR NF EN 61076-2-114 (02/2018)

    Connectors for electronic equipment - Product requirements - Part 2-114 : circular connectors - Detail specification for data and power connectors with M8 screw-locking
    2/16/2018 - Paper - French - AFNOR
    Learn More
    €87.16

  • PR NF C93-430-7/A2, PR NF EN 60603-7/A2 (02/2018)

    Amendment 2: Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
    2/3/2018 - Paper - French - AFNOR
    Learn More
    €94.83

  • PR NF C93-406-1/A1, PR NF EN 61076-1/A1 (02/2018)

    Amendment 1: Connectors for electronic equipment - Product requirements - Part 1: Generic specification
    2/3/2018 - Paper - French - AFNOR
    Learn More
    €94.83

  • DIN EN 61076-2-113 VDE 0687-2-113:2018-02

    Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz (IEC 61076-2-113:2017); German version EN 61076-2-113:2017
    2/1/2018 - Paper - German - VDE
    Learn More
    €98.49

  • IEC 60512-15-2 (2018-01)

    IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
    1/12/2018 - PDF - English, French - CEI
    Learn More
    €20.00

  • IEC/PAS 61076-3-126 (2018-01)

    IEC PAS 61076-3-126:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
    1/9/2018 - PDF - English - CEI
    Learn More
    €244.00

  • EIA-364-78C:2018

    TP-78C Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors
    1/1/2018 - PDF sécurisé - English - EIA
    Learn More
    €66.00

  • ANSI/VITA 46.9:2018

    PMC/XMC Rear I/O Fabric Signal Mapping on 3U and 6U VPX Modules Standard
    1/1/2018 - PDF - English - VITA
    Learn More
    €84.38

  • PR NF C93-400-1, PR NF EN 60512-1 (12/2017)

    Connectors for electronic equipment - Tests and measurements - Part 1: General
    12/27/2017 - Paper - French - AFNOR
    Learn More
    €54.48

  • IEC 61076-3-119 (2017-12)

    IEC 61076-3-119:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
    12/8/2017 - PDF - English - CEI
    Learn More
    €203.00

  • IEC 61076-2-111 (2017-12)

    IEC 61076-2-111:2017 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
    12/7/2017 - PDF - English - CEI
    Learn More
    €305.00

  • PR NF C93-406-3-123, PR NF EN 61076-3-123 (12/2017)

    Connectors for electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking
    12/6/2017 - Paper - French - AFNOR
    Learn More
    €78.69

  • BS EN 61000-4-39:2017

    Electromagnetic compatibilty (EMC). Testing and measurement techniques. Radiated fields in close proximity. Immunity test
    11/21/2017 - PDF - English - BSI
    Learn More
    €257.60

  • BS EN 61076-2-113:2017

    Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
    11/20/2017 - PDF - English - BSI
    Learn More
    €236.90

  • EIA-364-117:2017

    TP-117 Dielectric Breakdown Voltage Test Procedure for Electrical Connectors, Sockets and Coaxial Contacts
    11/1/2017 - PDF sécurisé - English - EIA
    Learn More
    €66.88

  • UNE-EN 61076-3-104:2017

    Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in November of 2017.)
    11/1/2017 - PDF - English - AENOR
    Learn More
    €30.00

  • UNE-EN 61076-3-122:2017

    Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (Endorsed by Asociación Española de Normalización in November of 2017.)
    11/1/2017 - PDF - English - AENOR
    Learn More
    €80.00

  • BS EN 61076-3-104:2017

    Connectors for electrical and electronic equipment. Product requirements. Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
    10/24/2017 - PDF - English - BSI
    Learn More
    €303.60

  • BS EN 61076-3-122:2017

    Connectors for electrical and electronic equipment. Product requirements. Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
    10/4/2017 - PDF - English - BSI
    Learn More
    €236.90

  • NF C93-406-2-113, NF EN 61076-2-113 (08/2017)

    Connectors for electronic equipment - Product requirements - Part 2-113 : circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
    8/5/2017 - PDF - French - UTE
    Learn More
    €112.42

  • NF C93-406-2-113, NF EN 61076-2-113 (08/2017)

    Connectors for electronic equipment - Product requirements - Part 2-113 : circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
    8/5/2017 - PDF - English - UTE
    Learn More
    €112.42

  • EIA JESD 214.01:2017

    Constant-Temperature Aging Method to Characterize Copper Interconnect Metallization for Stress-Induced Voiding
    8/1/2017 - PDF sécurisé - English - EIA
    Learn More
    €63.36

  • DIN EN 61076-8-100 VDE 0687-76-8-100:2017-07

    Connectors for electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 20 A (IEC 48B/2542/CD:2016)
    7/1/2017 - Paper - German - VDE
    Learn More
    €38.31

  • DIN EN 61076-8-101 VDE 0687-76-8-101:2017-07

    Connectors for electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 40 A (IEC 48B/2543/CD:2016)
    7/1/2017 - Paper - German - VDE
    Learn More
    €38.31

  • DIN EN 61076-8-102 VDE 0687-76-8-102:2017-07

    Connectors for electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 150 A (IEC 48B/2544/CD:2016)
    7/1/2017 - Paper - German - VDE
    Learn More
    €38.31

  • DIN EN 61076-3-124 VDE 0687-76-3-124:2017-07

    Connectors for electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10way, shielded, free and fixed rectangular connectors for I/O and data transmission capability with frequencies up to 500 MHz (IEC 48B/2552/CD:2017)
    7/1/2017 - Paper - German - VDE
    Learn More
    €38.31

  • DIN EN 60512-23-3 VDE 0687-512-23-3:2017-07

    Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories (IEC 48B/2559/CD:2017)
    7/1/2017 - Paper - German - VDE
    Learn More
    €18.19

  • DIN EN 60603-7-82 VDE 0687-7-82:2017-07

    Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz (IEC 60603-7-82:2016); German version EN 60603-7-82:2016
    7/1/2017 - Paper - German - VDE
    Learn More
    €61.54

  • UNE-EN 61076-2-113:2017

    Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz (Endorsed by Asociación Española de Normalización in July of 2017.)
    7/1/2017 - PDF - English - AENOR
    Learn More
    €83.00

  • VG 96944-1:2017-06

    Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 1: Requirements, tests, detail standard; Text in German and English
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €114.10

  • VG 96944-2:2017-06

    Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 2: Mounting, detail standard; Text in German and English
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €61.70

  • VG 96944-3:2017-06

    Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 3: Mating dimensions, detail standard; Text in German and English
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €75.40

  • VG 96944-4:2017-06

    Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 4: Dimensions, mass, detail standard; Text in German and English
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €68.30

  • VG 96944-5:2017-06

    Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 5: Contacts and contact inserts, detail standard; Text in German and English
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €89.00

  • DIN EN 61076-3-120 VDE 0687-76-3-120:2017-06

    Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A (IEC 61076-3-120:2016); German version EN 61076-3-120:2016
    6/1/2017 - Paper - German - VDE
    Learn More
    €77.84

  • DIN EN 61076-3-110 VDE 0687-76-3-110:2017-06

    Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz (IEC 61076-3-110:2016); German version EN 61076-3-110:2016
    6/1/2017 - Paper - German - VDE
    Learn More
    €61.54

  • IEC 61076-3-122 (2017-05)

    IEC 61076-3-122:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
    5/22/2017 - PDF - English - CEI
    Learn More
    €203.00

  • VG 95319-1006:2017-04

    Electrical connectors and plug-and-socket devices - Part 1006: Circular connectors with threaded coupling and removable crimp contacts, wall mounting flange (MIL-DTL-38999/20G with amendment 4); Text in German and English
    4/1/2017 - PDF - English, German - DIN
    Learn More
    €68.30

  • VG 95319-1007:2017-04

    Electrical connectors and plug-and-socket devices - Part 1007: Circular connectors with threaded coupling and removable crimp contacts, jam-nut mounting (MIL-DTL-38999/24J with amendment 2); Text in German and English
    4/1/2017 - PDF - English, German - DIN
    Learn More
    €68.30

  • VG 95319-1010:2017-04

    Electrical connectors and plug-and-socket devices - Part 1010: Jam nut for the single hole mounting of connectors according to VG 95319-1007 (MIL-DTL-38999/24J), detail standard; Text in German and English
    4/1/2017 - PDF - English, German - DIN
    Learn More
    €75.40

  • NF C93-406-3-120, NF EN 61076-3-120 (03/2017)

    Connectors for electronic equipment - Product requirements - Part 3-120 : rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    3/1/2017 - PDF - French - UTE
    Learn More
    €102.58

  • NF C93-430-7-82, NF EN 60603-7-82 (03/2017)

    Connectors for electronic equipment - Part 7-82 : detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
    3/1/2017 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-430-7-82, NF EN 60603-7-82 (03/2017)

    Connectors for electronic equipment - Part 7-82 : detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
    3/1/2017 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-406-3-120, NF EN 61076-3-120 (03/2017)

    Connectors for electronic equipment - Product requirements - Part 3-120 : rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    3/1/2017 - PDF - English - UTE
    Learn More
    €102.58

  • PD IEC/TS 61586:2017

    Estimation of the reliability of electrical connectors
    2/28/2017 - PDF - English - BSI
    Learn More
    €202.40

  • BS IEC 62946-02:2017

    Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission with frequencies up to 250 MHz and with current carrying capacity up to 1 A
    2/28/2017 - PDF - English - BSI
    Learn More
    €202.40

  • IEC 61076-2-113 (2017-02)

    IEC 61076-2-113:2017 Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
    2/21/2017 - PDF - English, French - CEI
    Learn More
    €203.00

  • VG 95319-100:2017-02

    Electrical connectors and plug-and-socket devices - Part 100: Expanded beam free connector (MIL-DTL-83526/20C with amendment 1), detail standard; Text in German and English
    2/1/2017 - PDF - English, German - DIN
    Learn More
    €142.10

  • VG 95319-101:2017-02

    Electrical connectors and plug-and-socket devices - Part 101: Expanded beam free connector (MIL-DTL-83526/21C with amendment 1), detail standard; Text in German and English
    2/1/2017 - PDF - English, German - DIN
    Learn More
    €125.30

  • UNE-EN 61076-3-120:2016

    Connectors for electronic equipment - product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 v d.c. And rated current of 30 a (Endorsed by Asociación Española de Normalización in February of 2017.)
    2/1/2017 - PDF - English - AENOR
    Learn More
    €75.00

  • UNE-EN 60603-7-82:2016

    Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in February of 2017.)
    2/1/2017 - PDF - English - AENOR
    Learn More
    €68.00

  • BS EN 60603-7-82:2016

    Connectors for electronic equipment. Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
    1/31/2017 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN 61076-3-120:2016

    Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    1/31/2017 - PDF - English - BSI
    Learn More
    €202.40

  • IEC/TS 61586 (2017-01)

    IEC TS 61586:2017 Estimation of the reliability of electrical connectors
    1/25/2017 - PDF - English, French - CEI
    Learn More
    €173.00

  • IEC 62946-02 (2017-01)

    IEC 62946-02:2017 Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission up to 250 MHz and with current carrying capacity up to 1 A
    1/20/2017 - PDF - English - CEI
    Learn More
    €173.00

  • NF C93-406-3-110, NF EN 61076-3-110 (01/2017)

    Connectors for electronic equipment - Product requirements - Part 3-110 : detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 3 000 MHz
    1/14/2017 - PDF - French - UTE
    Learn More
    €77.83

  • NF C93-406-3-110, NF EN 61076-3-110 (01/2017)

    Connectors for electronic equipment - Product requirements - Part 3-110 : detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 3 000 MHz
    1/14/2017 - PDF - English - UTE
    Learn More
    €77.83

  • UNE-EN 61076-3-110:2016

    Connectors for electronic equipment - Product requirements - Part 3-110: detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 mhz (Endorsed by Asociación Española de Normalización in January of 2017.)
    1/1/2017 - PDF - English - AENOR
    Learn More
    €68.00

  • ANSI/SCTE 185:2017

    Test Method for Cantilever Force, Female F Port
    1/1/2017 - PDF sécurisé - English - SCTE
    Learn More
    €42.50

  • BS EN 61076-3-110:2016

    Connectors for electronic equipment. Product requirements. Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
    12/31/2016 - PDF - English - BSI
    Learn More
    €202.40

  • JIS C 5402-8-2:2016

    Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-12-1:2016

    Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-12-2:2016

    Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-12-4:2016

    Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-12-5:2016

    Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-22-1:2016

    Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • EIA-964:2016

    Specification for QSFP+ 10 Gb/s Pluggable Transceiver
    12/1/2016 - PDF sécurisé - English - EIA
    Learn More
    €186.56

  • DIN EN 61076-2-114 VDE 0687-2-114:2016-11

    Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking (IEC 48B/2503/CD:2016)
    11/1/2016 - Paper - German - VDE
    Learn More
    €42.45

  • DIN EN 60512-1 VDE 0687-512-1:2016-11

    Connectors for electronic equipment - Tests and measurements - Part 1: General (IEC 48B/2517/CD:2016)
    11/1/2016 - Paper - German - VDE
    Learn More
    €18.19

  • DIN EN 60603-7-81 VDE 0687-603-7-81:2016-10

    Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2000 MHz (IEC 60603-7-81:2015); German version EN 60603-7-81:2016
    10/1/2016 - Paper - German - VDE
    Learn More
    €61.54

  • ASTM B1004-16

    Standard Practice for Contact Performance Classification of Electrical Connection Systems
    10/1/2016 - PDF - English - ASTM
    Learn More
    €38.00

  • DIN EN 61076-4-116 VDE 0687-76-4-116:2016-09

    Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (IEC 61076-4-116:2012 + A1:2015); German version EN 61076-4-116:2012 + A1:2016
    9/1/2016 - Paper - German - VDE
    Learn More
    €121.28

  • IEC 61076-3-110 (2016-08)

    IEC 61076-3-110:2016 Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
    8/30/2016 - PDF - English, French - CEI
    Learn More
    €102.00

  • IEC 60603-7-82 (2016-08)

    IEC 60603-7-82:2016 Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
    8/25/2016 - PDF - English, French - CEI
    Learn More
    €102.00

  • IEC 61076-3-120 (2016-08)

    IEC 61076-3-120:2016 Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    8/25/2016 - PDF - English, French - CEI
    Learn More
    €142.00

  • NF C93-430-7-81, NF EN 60603-7-81 (08/2016)

    Connectors for electronic equipment - Part 7-81 : detail specification for 8- way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz
    8/13/2016 - PDF - French - UTE
    Learn More
    €91.08

  • MIL-DTL-38999/20:2016

    Connectors, Electrical, Circular, Receptacle, Threaded, Wall Mounting Flange, Removable Crimp Contacts, Series III, Metric
    8/5/2016 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MIL-DTL-38999/24:2016

    Connectors, Electrical, Circular, Receptacle, Threaded, Jam-Nut Mounting, Removable Crimp Contacts, Series III, Metric
    8/5/2016 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • DIN EN 60512-28-100 VDE 0687-512-28-100:2016-06

    Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2000 MHz for IEC 60603-7 and IEC 61076-3 series connectors -Tests 28a to 28g (IEC 48B/2470/CD:2015)
    6/1/2016 - Paper - German - VDE
    Learn More
    €42.45

  • EIA-364-118:2016

    Thermal Shock for Hermetic Electrical Connectors and Sockets
    6/1/2016 - PDF sécurisé - English - EIA
    Learn More
    €66.00

  • PD IEC/PAS 61076-2-114:2016

    Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for data and power connectors with M8 screw-locking
    5/31/2016 - PDF - English - BSI
    Learn More
    €257.60

  • NF C93-406-4-116/A1, NF EN 61076-4-116/A1 (05/2016)

    Connectors for electronic equipment - Product requirements - Part 4-116 : printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
    5/20/2016 - PDF - French - UTE
    Learn More
    €63.42

  • IEC/PAS 61076-2-114 (2016-05)

    IEC PAS 61076-2-114:2016 Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking
    5/12/2016 - PDF - English - CEI
    Learn More
    €244.00

  • DIN EN 62946-01 VDE 0687-461:2016-05

    Connectors for electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transfer and with current up to 1A (IEC 48B/2466/CD:2015)
    5/1/2016 - Paper - German - VDE
    Learn More
    €29.12

  • UNE-EN 61076-4-116:2012/A1:2016

    Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (Endorsed by AENOR in May of 2016.)
    5/1/2016 - PDF - English - AENOR
    Learn More
    €46.00

  • UNE-EN 60603-7-81:2016

    Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz (Endorsed by AENOR in May of 2016.)
    5/1/2016 - PDF - English - AENOR
    Learn More
    €68.00

  • BS EN 60603-7-81:2016

    Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz
    4/30/2016 - PDF - English - BSI
    Learn More
    €144.90

  • VG 96513-1:2016-04

    Electrical connectors and plug-and-socket devices - Modular rectangular connector - Part 1: Requirements, tests, detail standard; Text in German and English
    4/1/2016 - PDF - English, German - DIN
    Learn More
    €114.10

  • DIN EN 61076-3-123 VDE 0687-76-3-123:2016-04

    Connectors for electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking (IEC 48B/2461/CD:2015)
    4/1/2016 - Paper - German - VDE
    Learn More
    €45.89

  • JIS C 5402-7-1:2016

    Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
    3/22/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-8-1:2016

    Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse
    3/22/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-8-3:2016

    Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever
    3/22/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-9-1:2016

    Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation
    3/22/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-14-2:2016

    Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
    3/22/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-14-4:2016

    Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof
    3/22/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-14-5:2016

    Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure
    3/22/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-14-6:2016

    Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
    3/22/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN EN 60512-29-100 VDE 0687-512-29-100:2016-03

    Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g (IEC 60512-29-100:2015); German version EN 60512-29-100:2015
    3/1/2016 - Paper - German - VDE
    Learn More
    €121.28

  • DIN EN 62946-02 VDE 0687-46-2:2016-03

    Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission up to 250 MHz and with Power over Ethernet capabilities (IEC 48B/2449/CD:2015)
    3/1/2016 - Paper - German - VDE
    Learn More
    €33.80

  • VG 95351-1:2016-01

    Electrical connectors and plug-and-socket devices - Connectors with bayonet coupling, butting contact, 7pole - Part 1: Requirements, tests; detail standard; Text in German and English
    1/1/2016 - PDF - English, German - DIN
    Learn More
    €112.00

  • VG 95351-2:2016-01

    Electrical connectors and plug-and-socket devices - Connectors with bayonet coupling, butting contact, 7pole - Part 2: Recommendation for mounting, detail standard; Text in German and English
    1/1/2016 - PDF - English, German - DIN
    Learn More
    €61.70

  • NEMA C 119.1:2016

    Electric Connectors - Sealed Insulated Underground Connector Systems Rated 600 Volts
    1/1/2016 - PDF sécurisé - English - NEMA
    Learn More
    €107.36

  • ANSI C119.1:2016 (R2017)

    Electric Connectors - Sealed Insulated Underground Connector Systems Rated 600 V
    1/1/2016 - PDF sécurisé - English - ANSI
    Learn More
    €130.00

  • IEC 60603-7-81 (2015-12)

    IEC 60603-7-81:2015 Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz
    12/16/2015 - PDF - English, French - CEI
    Learn More
    €102.00

  • IEC 61076-4-116 AMD 1 (2015-11)

    IEC 61076-4-116:2012/AMD1:2015 Amendment 1 - Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
    11/23/2015 - PDF - English, French - CEI
    Learn More
    €41.00

  • IEC 61076-4-116 Edition 1.1 (2015-11)

    IEC 61076-4-116:2012+AMD1:2015 consolidated version Connectors for electronic equipment - Product requirements - Part4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
    11/23/2015 - PDF - English, French - CEI
    Learn More
    €355.00

  • JIS C 5401-1:2015

    Connectors for electronic equipment - Product requirements - Part 1: Generic specification
    11/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-13-1:2015

    Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
    11/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • VG 96938-4:2015-11

    Electrical connectors and plug-and-socket devices - Ethernet connectors for data transmissions with threaded coupling (IP X7), up to 60 V - Part 4: Dimensions, masses, non shielded, detail standard; Text in German and English
    11/1/2015 - PDF - English, German - DIN
    Learn More
    €61.70

  • DIN EN 60512-99-002 VDE 0687-512-99-002:2015-11

    Connectors for electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for engaging and separating connectors under electrical load connectors (IEC 48B/2438/CD:2015)
    11/1/2015 - Paper - German - VDE
    Learn More
    €18.19

  • UNE-EN 60512-29-100:2015

    Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g (Endorsed by AENOR in November of 2015.)
    11/1/2015 - PDF - English - AENOR
    Learn More
    €99.00

  • EIA-364-104B:2015

    Flammability Test Procedure for Electrical Connectors
    9/1/2015 - PDF sécurisé - English - EIA
    Learn More
    €66.88

  • EIA-364-116:2015

    Pin Contact Stability Test Procedure for Electrical Connectors
    8/1/2015 - PDF sécurisé - English - EIA
    Learn More
    €66.88

  • DIN EN 61076-2-104 VDE 0687-76-2-104:2015-06

    Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (IEC 61076-2-104:2014); German version EN 61076-2-104:2014
    6/1/2015 - Paper - German - VDE
    Learn More
    €87.98

  • BS IEC 60512-1-101:2015

    Connectors for electronic equipment. Tests and measurements. Blank detail specification
    5/31/2015 - PDF - English - BSI
    Learn More
    €144.90

  • IEC 60512-1-101 (2015-05)

    IEC 60512-1-101:2015 Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification
    5/5/2015 - PDF - English, French - CEI
    Learn More
    €41.00

  • DIN EN 62680-2-2:2015-05

    Universal Serial Bus interfaces for data and power - Part 2-2: Universal Serial Bus - Micro-USB Cables and Connectors Specification, Revision 1.01 (IEC 100/2332/CDV:2014); English version FprEN 62680-2-2:2014
    5/1/2015 - PDF - English - DIN
    Learn More
    €141.90

  • JIS C 5402-16-8:2015

    Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on contacts and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
    4/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-16-9:2015

    Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
    4/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-16-13:2015

    Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections
    4/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-17-1:2015

    Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness
    4/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-17-2:2015

    Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
    4/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-17-4:2015

    Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
    4/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • BS EN 60512-29-100:2015

    Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g
    3/31/2015 - PDF - English - BSI
    Learn More
    €282.90

  • JIS C 8121-2-3:2015

    Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps
    3/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • IEC 60512-29-100 (2015-03)

    IEC 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
    3/5/2015 - PDF - English, French - CEI
    Learn More
    €274.00

  • VG 96923-1:2015-03

    Electrical connectors and plug-and-socket devices - Connectors, 12 poles, solder termination - Part 1: Requirements, tests, detail standard; Text in German and English
    3/1/2015 - PDF - English, German - DIN
    Learn More
    €112.00

  • VG 96923-2:2015-03

    Electrical connectors and plug-and-socket devices - Connectors, 12 poles, solder termination - Part 2: Mounting instructions, detail standard; Text in German and English
    3/1/2015 - PDF - English, German - DIN
    Learn More
    €54.80

  • VG 96923-3:2015-03

    Electrical connectors and plug-and-socket devices - Connectors, 12 poles, solder termination - Part 3: Dimensions, mass, detail standard; Text in German and English
    3/1/2015 - PDF - English, German - DIN
    Learn More
    €89.00

  • DIN EN 62680-2-3:2015-03

    Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (IEC 100/2333/CDV:2014); English version FprEN 62680-2-3:2014
    3/1/2015 - PDF - English - DIN
    Learn More
    €141.90

  • EIA-974:2015

    Specification for Mini Multilane 10 Gb/s 4X Common Elements Connectors
    3/1/2015 - PDF sécurisé - English - EIA
    Learn More
    €86.24

  • EIA-975:2015

    Specification for Mini Multilane 10 Gb/s 4X Unshielded Receptacle Shell and Plug
    3/1/2015 - PDF sécurisé - English - EIA
    Learn More
    €84.48

  • EIA-976:2015

    Specification for Mini Multilane 10 Gb/s 4X Shielded Receptacle Shell and Plug
    3/1/2015 - PDF sécurisé - English - EIA
    Learn More
    €86.24

  • DIN EN 62680-2:2015-02

    Universal serial bus interfaces for data and power - Part 2: Universal serial bus - Micro-USB cables and connectors specification, revision 1.01 (IEC 62680-2:2013); English version EN 62680-2:2013
    2/1/2015 - PDF - English - DIN
    Learn More
    €141.90

  • DIN EN 61076-1/A1:2015-02

    Connectors for electronic equipment - Product requirements - Part 1: Generic specification (IEC 48B/2394/CD:2014)
    2/1/2015 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN 61076-2-109 VDE 0687-76-2-109:2015-02

    Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz (IEC 61076-2-109:2014); German version EN 61076-2-109:2014
    2/1/2015 - Paper - German - VDE
    Learn More
    €84.90

  • NF C93-406-2-104, NF EN 61076-2-104 (01/2015)

    Connectors for electronic equipment - Product requirements - Part 2-104 : circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
    1/10/2015 - PDF - French - UTE
    Learn More
    €112.42

  • DIN EN 60603-7/A2 VDE 0627-603-7/A2:2015-01

    Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 48B/2393/CD:2014)
    1/1/2015 - Paper - German - VDE
    Learn More
    €14.40

  • NEMA C 119.0:2015

    Electric Connectors - Testing Methods and Equipment Common to the ANSI C119 Family of Standards
    1/1/2015 - PDF sécurisé - English - NEMA
    Learn More
    €0.00

  • IEEE 63003:2015

    IEC/IEEE International standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505(TM)
    1/1/2015 - PDF - English - IEEE
    Learn More
    €280.17

  • IEEE 63004:2015

    IEC/IEEE International standard for receiver fixture interface
    1/1/2015 - PDF - English - IEEE
    Learn More
    €270.27

  • IEEE 1505.3:2015

    IEEE Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Benchtop Test Requirements Utilizing IEEE 1505(TM) Receiver Fixture Interface Standard
    1/1/2015 - PDF - English - IEEE
    Learn More
    €50.49

  • ANSI/VITA 63:2015

    Hyperboloid Alternative Connector for VPX
    1/1/2015 - PDF - English - VITA
    Learn More
    €56.25

  • VG 96938-1:2014-12

    Electrical connectors and plug-and-socket devices - Ethernet connectors for data transmissions with threaded coupling (IP X7), up to 60 V - Part 1: Requirements, tests, detail standard; Text in German and English
    12/1/2014 - PDF - English, German - DIN
    Learn More
    €112.00

  • VG 96938-2:2014-12

    Electrical connectors and plug-and-socket devices - Ethernet connectors for data transmissions with threaded coupling (IP X7), up to 60 V - Part 2: Mounting, detail standard; Text in German and English
    12/1/2014 - PDF - English, German - DIN
    Learn More
    €89.00

  • VG 96938-3:2014-12

    Electrical connectors and plug-and-socket devices - Ethernet connectors for data transmissions with threaded coupling (IP X7), up to 60 V - Part 3: Dimensions, masses, detail standard; Text in German and English
    12/1/2014 - PDF - English, German - DIN
    Learn More
    €67.00

  • UNE-EN 61076-2-104:2014

    Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (Endorsed by AENOR in December of 2014.)
    12/1/2014 - PDF - English - AENOR
    Learn More
    €83.00

  • BS EN 61076-2-104:2014

    Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for circular connectors with M8 screw-locking or snap-locking
    11/30/2014 - PDF - English - BSI
    Learn More
    €236.90

  • NF C93-406-2-109, NF EN 61076-2-109 (11/2014)

    Connectors for electronic equipment - Product requirements - Part 2-109 : circular connectors - Detail specification for connectors with M 12 x 1 screw-locking, for data transmissions frequencies up to 500 MHz
    11/15/2014 - PDF - French - UTE
    Learn More
    €102.58

  • DIN EN 62680-4:2014-11

    Universal serial bus interfaces for data and power - Part 4: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (IEC 62680-4:2013); English version EN 62680-4:2014
    11/1/2014 - PDF - English - DIN
    Learn More
    €136.80

  • UNE-EN 61076-2-109:2014

    Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz (Endorsed by AENOR in October of 2014.)
    10/1/2014 - PDF - English - AENOR
    Learn More
    €78.00

  • BS EN 61076-2-109:2014

    Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz
    9/30/2014 - PDF - English - BSI
    Learn More
    €236.90

  • NF C83-403, NF EN 175300 (09/2014)

    Sectional specification : rectangular connectors for frequencies below 3 MHz
    9/13/2014 - PDF - French - UTE
    Learn More
    €124.52

  • NF C83-403, NF EN 175300 (09/2014)

    Sectional specification : rectangular connectors for frequencies below 3 MHz
    9/13/2014 - PDF - English - UTE
    Learn More
    €124.52

  • IEC 61076-2-104 (2014-09)

    IEC 61076-2-104:2014 Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
    9/9/2014 - PDF - English, French - CEI
    Learn More
    €203.00

  • DIN IEC/TR 62632 DIN SPEC 42632:2014-09

    Nanoscale electrical contacts and interconnects (IEC/TR 62632:2013)
    9/1/2014 - PDF - German - DIN
    Learn More
    €119.60

  • NF C83-201-804, NF EN 175201-804 (06/2014)

    Détail specification : circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling
    6/21/2014 - PDF - French - UTE
    Learn More
    €124.52

  • NF C83-201-804, NF EN 175201-804 (06/2014)

    Détail specification : circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling
    6/21/2014 - PDF - English - UTE
    Learn More
    €124.52

  • JIS C 5402-13-5:2014

    Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
    6/20/2014 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-15-1:2014

    Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
    6/20/2014 - PDF - Japanese - JSA
    Learn More
    €25.00

Items 1 to 200 of 1401 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8