Closure for annual leave, no order will be honored August 1 to August 19, 2019 included.

Call +33 (1) 40 02 03 05
Type de carte de crédit

31.220 : Electromechanical components for electronic and telecommunications equipment

Items 1 to 200 of 1861 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  • IEC 61169-24 Redline version (2019-07)

    IEC 61169-24:2019 RLV Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F)
    7/19/2019 - PDF - English - CEI
    Learn More
    €224.00

  • IEC 61169-24 (2019-07)

    IEC 61169-24:2019 Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 O cable networks (type F)
    7/19/2019 - PDF - English, French - CEI
    Learn More
    €173.00

  • BS EN 61076-1:2006+A1:2019


    7/15/2019 - PDF - English - BSI
    Learn More
    €236.90

  • BS EN 60603-7:2009+A2:2019


    7/2/2019 - PDF - English - BSI
    Learn More
    €282.90

  • PR NF EN IEC 60352-3, C93-024-3PR (07/2019)


    7/1/2019 - Paper - French - AFNOR
    Learn More
    €112.96

  • PR NF EN IEC 60352-4, C93-024-2PR (07/2019)


    7/1/2019 - Paper - French - AFNOR
    Learn More
    €112.96

  • IEC 60512-11-1 (2019-05)

    IEC 60512-11-1:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence
    5/16/2019 - PDF - English, French - CEI
    Learn More
    €41.00

  • BS EN IEC 61076-3-124:2019


    5/8/2019 - PDF - English - BSI
    Learn More
    €266.80

  • BS EN IEC 60512-99-002:2019


    5/2/2019 - PDF - English - BSI
    Learn More
    €144.90

  • NF EN IEC 61076-3-124, C93-406-3-124 (05/2019)

    Connectors for electrical and electronic equipment - Product requirements - Part 3-124 : rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz - Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 3-124 : Connecteurs rectangulaires - Spécification particulière pour les fiches et les embases écrantées à 10 voies pour les entrées/sorties et la transmission de données à des fréquences jusqu'à 500 MHz
    5/1/2019 - Paper - French - AFNOR
    Learn More
    €124.52

  • PR NF EN IEC 63171-1, C93-408-1PR (05/2019)


    5/1/2019 - Paper - French - AFNOR
    Learn More
    €78.69

  • PR NF EN IEC 63171-6, C93-408-6PR (05/2019)


    5/1/2019 - Paper - French - AFNOR
    Learn More
    €87.16

  • UNE-EN IEC 61020-1:2019

    Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in May of 2019.)
    5/1/2019 - PDF - English - AENOR
    Learn More
    €126.00

  • UNE-EN 63024:2019

    Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses
    4/10/2019 - PDF - English - AENOR
    Learn More
    €109.20

  • UNE-EN 63024:2019

    Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses
    4/10/2019 - PDF - Spanish - AENOR
    Learn More
    €91.00

  • UNE-EN IEC 60512-23-3:2019

    Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method (Endorsed by Asociación Española de Normalización in April of 2019.)
    4/1/2019 - PDF - English - AENOR
    Learn More
    €63.00

  • NF EN IEC 60512-99-002, C93-400-99-002 (04/2019)

    Connectors for electronic equipment - tests and measurements - Part 99-002 : endurance test schedules - Test 99b : test schedule for unintended unmating under electrical load - Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 99-002 : Programmes d'essais d'endurance - Essai 99b : Programme d'essai pour le désaccouplement sous charge électrique
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €77.83

  • UNE-EN 61076-1:2006/A1:2019

    Connectors for electronic equipment - Product requirements - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in April of 2019.)
    4/1/2019 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN 60603-7:2009/A2:2019

    Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (Endorsed by Asociación Española de Normalización in April of 2019.)
    4/1/2019 - PDF - English - AENOR
    Learn More
    €57.00

  • BS EN IEC 61020-1:2019


    3/26/2019 - PDF - English - BSI
    Learn More
    €303.60

  • IEC 61076-3-124 (2019-03)

    IEC 61076-3-124:2019 Connectors for electrical and electronic equipment - Product requirements – Part 3-124: Rectangular connectors – Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz
    3/11/2019 - PDF - English, French - CEI
    Learn More
    €244.00

  • IEC 60512-99-002 (2019-03)

    IEC 60512-99-002:2019 Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load
    3/8/2019 - PDF - English, French - CEI
    Learn More
    €71.00

  • BS EN IEC 60512-23-3:2019


    3/5/2019 - PDF - English - BSI
    Learn More
    €144.90

  • NF EN 60603-7/A2, C93-430-7/A2 (03/2019)

    Connectors for electronic equipment - Part 7 : detail specification for 8-way, unshielded, free and fixed connectors - Amendement 2 : Connecteurs pour équipements électroniques - Partie 7 : Spécification particulière pour les fiches et les embases non écrantées à 8 voies
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €63.42

  • NF EN 61076-1/A1, C93-406-1/A1 (03/2019)

    Connectors for electronic equipment - Product requirements - Part 1: generic specification - Amendement 1 : Connecteurs pour équipements électroniques - Exigences de produit - Partie 1 : Spécification générique
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €91.08

  • NF EN IEC 60512-23-3, C93-400-23-3 (03/2019)

    Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3 : screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method - Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 23-3 : Essai 23c : Efficacité de blindage des connecteurs et des accessoires
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €77.83

  • €54.48

  • NF EN IEC 61020-1, C83-410-1 (03/2019)

    Electromechanical switches for use in electrical and electronic equipment - Part 1 : generic specification - Interrupteurs électromécaniques pour équipements électriques et électroniques - Partie 1 : Spécification générique
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €173.47

  • UNE-EN IEC 61058-1:2019

    Switches for appliances - Part 1: General requirements
    2/6/2019 - PDF - English - AENOR
    Learn More
    €166.80

  • UNE-EN IEC 61058-1:2019

    Switches for appliances - Part 1: General requirements
    2/6/2019 - PDF - Spanish - AENOR
    Learn More
    €139.00

  • IEC 61020-1 (2019-01)

    IEC 61020-1:2019 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
    1/16/2019 - PDF - English, French - CEI
    Learn More
    €305.00

  • IEC 60603-7 AMD 2 (2019-01)

    IEC 60603-7:2008/AMD2:2019 Amendment 2 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
    1/11/2019 - PDF - English, French - CEI
    Learn More
    €41.00

  • IEC 60603-7 Edition 3.2 (2019-01)

    IEC 60603-7:2008+AMD1:2011+AMD2:2019 consolidated version Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
    1/11/2019 - PDF - English, French - CEI
    Learn More
    €406.00

  • IEC 61076-1 Edition 2.1 (2019-01)

    IEC 61076-1:2006+AMD1:2019 consolidated version Connectors for electronic equipment - Product requirements - Part 1: Generic specification
    1/11/2019 - PDF - English, French - CEI
    Learn More
    €203.00

  • IEC 61076-1 AMD 1 (2019-01)

    IEC 61076-1:2006/AMD1:2019 Amendment 1 - Connectors for electronic equipment - Product requirements - Part 1: Generic specification
    1/11/2019 - PDF - English, French - CEI
    Learn More
    €20.00

  • 19/30363090 DC


    1/4/2019 - PDF - English - BSI
    Learn More
    €23.00

  • €44.39

  • UNE-EN IEC 60512-1:2018

    Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in January of 2019.)
    1/1/2019 - PDF - English - AENOR
    Learn More
    €63.00

  • IEC 60512-23-3 (2018-12)

    IEC 60512-23-3:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method
    12/14/2018 - PDF - English, French - CEI
    Learn More
    €71.00

  • IEC 60512-23-3 Redline version (2018-12)

    IEC 60512-23-3:2018 RLV Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method
    12/14/2018 - PDF - English - CEI
    Learn More
    €92.00

  • BS EN IEC 60512-1:2018


    12/6/2018 - PDF - English - BSI
    Learn More
    €144.90

  • DIN EN IEC 61076-3-119 VDE 0687-76-3-119:2018-12

    Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz (IEC 61076-3-119:2017); German version EN IEC 61076-3-119:2018
    12/1/2018 - Paper - German - VDE
    Learn More
    €98.49

  • NF EN IEC 60512-1, C93-400-1 (11/2018)

    Connectors for electrical and electronic equipment - Tests and measurements - Part 1 : generic specification - Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 1: Spécification générique
    11/1/2018 - Paper - French - AFNOR
    Learn More
    €77.83

  • VG 95319-1015:2018-11

    Electrical connectors and plug-and-socket devices - Part 1015: Metallic tie for termination of screening braids on the band adapter, detail standard; Text in German and English
    11/1/2018 - PDF - English, German - DIN
    Learn More
    €96.90

  • UNE-CLC/TR 50625-6:2018 IN

    Collection, logistics & treatment requirements for WEEE - Part 6: Report on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614
    10/24/2018 - PDF - English - AENOR
    Learn More
    €66.00

  • UNE-CLC/TR 50625-6:2018 IN

    Collection, logistics & treatment requirements for WEEE - Part 6: Report on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614
    10/24/2018 - PDF - Spanish - AENOR
    Learn More
    €55.00

  • IEC 60512-1 Redline version (2018-10)

    IEC 60512-1:2018 RLV Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
    10/22/2018 - PDF - English - CEI
    Learn More
    €92.00

  • IEC 60512-1 (2018-10)

    IEC 60512-1:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
    10/22/2018 - PDF - English, French - CEI
    Learn More
    €71.00

  • IEC/PAS 60512-27-200 (2018-10)

    IEC PAS 60512-27-200:2018 Connecteurs for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests 27a to 27g
    10/19/2018 - PDF - English - CEI
    Learn More
    €325.00

  • DIN EN IEC 60512-8-3 VDE 0687-512-8-3:2018-10

    Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (IEC 60512-8-3:2018); German version EN IEC 60512-8-3:2018
    10/1/2018 - Paper - German - VDE
    Learn More
    €45.89

  • VG 95319-2/A1:2018-10

    Electrical connectors and plug-and-socket devices - Part 2: Generic standard; Amendment A1; Text in German and English
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €81.90

  • DIN EN IEC 60512-15-2 VDE 0687-512-15-2:2018-10

    Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (IEC 60512-15-2:2018); German version EN IEC 60512-15-2:2018
    10/1/2018 - Paper - German - VDE
    Learn More
    €42.45

  • DIN EN IEC 61076-2-111 VDE 0687-76-2-111:2018-10

    Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (IEC 61076-2-111:2017); German version EN IEC 61076-2-111:2018
    10/1/2018 - Paper - German - VDE
    Learn More
    €155.17

  • PR NF EN 61076-8-101, C93-406-8-101PR (10/2018)

    Connectors for electronic equipment - Product requirements - Part 8-101 : power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 40 A
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €87.16

  • DIN EN 60352-4:2018-09

    Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance (IEC 48B/2633/CD:2018); Text in German and English
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €147.20

  • DIN EN 60352-3:2018-09

    Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance (IEC 48B/2632/CD:2018); Text in German and English
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €119.60

  • VG 96513-5:2018-09

    Electrical connectors and plug-and-socket devices - Modular rectangular connector - Part 5: Contacts and contact inserts, detail standard; Text in German and English
    9/1/2018 - PDF - English, German - DIN
    Learn More
    €104.40

  • PR NF EN 61076-8-100, C93-406-8-100PR (09/2018)

    IEC 61076-8-100 Ed1: Connectors for electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 20 A
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €87.16

  • PR NF EN 61076-8-102, C93-406-8-102PR (09/2018)

    Connectors for electronic equipment - Product requirements - Part 8-102 : power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 150 A
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €87.16

  • DIN EN 60352-5:2018-08

    Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance (IEC 48B/2635/CD:2018); Text in German and English
    8/1/2018 - PDF - English, German - DIN
    Learn More
    €125.30

  • UNE-EN IEC 61076-2-111:2018

    Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (Endorsed by Asociación Española de Normalización in August of 2018.)
    8/1/2018 - PDF - English - AENOR
    Learn More
    €110.00

  • 18/30352683 DC


    7/20/2018 - PDF - English - BSI
    Learn More
    €23.00

  • 18/30352684 DC


    7/20/2018 - PDF - English - BSI
    Learn More
    €23.00

  • 18/30352685 DC


    7/20/2018 - PDF - English - BSI
    Learn More
    €23.00

  • BS EN 60603-7-81:2016


    6/7/2018 - PDF - English - BSI
    Learn More
    €144.90

  • DIN EN 61076-3-104 VDE 0687-76-3-104:2018-06

    Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (IEC 61076-3-104:2017); German version EN 61076-3-104:2017
    6/1/2018 - Paper - German - VDE
    Learn More
    €169.34

  • BS IEC 62946-01:2018

    Connectors for electrical and electronic equipment. Rectangular connectors. Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carrying capacity up to 1 A
    6/1/2018 - PDF - English - BSI
    Learn More
    €202.40

  • IEC 62946-01 (2018-05)

    IEC 62946-01:2018 Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A
    5/24/2018 - PDF - English - CEI
    Learn More
    €173.00

  • UNE-EN IEC 60512-8-3:2018

    Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (Endorsed by Asociación Española de Normalización in May of 2018.)
    5/1/2018 - PDF - English - AENOR
    Learn More
    €57.00

  • UNE-EN IEC 60512-15-2:2018

    Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (Endorsed by Asociación Española de Normalización in May of 2018.)
    5/1/2018 - PDF - English - AENOR
    Learn More
    €57.00

  • DIN EN 61020-1:2018-05

    Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification (IEC 23J/437/CD:2017); Text in German and English
    5/1/2018 - PDF - English, German - DIN
    Learn More
    €282.00

  • BS EN IEC 60512-8-3:2018


    4/24/2018 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN IEC 60512-15-2:2018


    4/24/2018 - PDF - English - BSI
    Learn More
    €121.90

  • DIN EN 61076-3-125 VDE 0687-76-3-125:2018-04

    Connectors for electrical and electronic components - Product requirements - Part 3-125: Connectors - Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for transmission capability and power supply capability with frequencies up to 600 MHz (IEC 48B/2600/CD:2017); Text in German and English
    4/1/2018 - Paper - German - VDE
    Learn More
    €42.45

  • DIN EN 61076-3-122 VDE 0687-76-3-122:2018-04

    Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (IEC 61076-3-122:2017); German version EN 61076-3-122:2017
    4/1/2018 - Paper - German - VDE
    Learn More
    €91.70

  • UNE-EN IEC 61076-3-119:2018

    Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz (Endorsed by Asociación Española de Normalización in April of 2018.)
    4/1/2018 - PDF - English - AENOR
    Learn More
    €76.00

  • VG 95345-15:2018-04

    Electrical and electronic circuit breakers - Part 15: Single pole, with galvanic disconnection, rated current 125 A to 500 A without or with auxiliary switch, detail standard; Text in German and English
    4/1/2018 - PDF - English, German - DIN
    Learn More
    €136.80

  • NF C93-586, NF EN 61726 (03/2018)

    Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
    3/28/2018 - PDF - English - UTE
    Learn More
    €77.83

  • BS EN IEC 61076-2-111:2018

    Connectors for electrical and electronic equipment - Product requirements. Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (IEC 61076-2-111:2017)
    3/26/2018 - PDF - English - BSI
    Learn More
    €303.60

  • BS EN IEC 61076-3-119:2018

    Connectors for electrical and electronic equipment. Product requirements. Rectangular connectors. Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
    3/26/2018 - PDF - English - BSI
    Learn More
    €236.90

  • NF C93-400-15-2, NF EN IEC 60512-15-2 (03/2018)

    Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2 : connector tests (mechanical) - Test 15b : insert retention in housing (axial)
    3/23/2018 - PDF - English - UTE
    Learn More
    €63.42

  • NF C93-400-8-3, NF EN IEC 60512-8-3 (03/2018)

    Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3 : static load tests (fixed connectors) - Test 8c : robustness of actuating lever
    3/23/2018 - PDF - English - UTE
    Learn More
    €63.42

  • 18/30352645 DC


    3/13/2018 - PDF - English - BSI
    Learn More
    €23.00

  • UNE-EN 62359:2011/A1:2018

    Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields (Endorsed by Asociación Española de Normalización in March of 2018.)
    3/1/2018 - PDF - English - AENOR
    Learn More
    €72.00

  • NF EN 61726, C93-586 (03/2018)

    Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method - Câbles, cordons, connecteurs et composants hyperfréquence passifs
    3/1/2018 - Paper - French - AFNOR
    Learn More
    €77.83

  • VG 95324-10:2018-03

    Electrical connectors and plug-and-socket devices - connectors for printed boards - Part 10: Pin and socket connectors with circular contacts, detail standard; Text in German and English
    3/1/2018 - PDF - English, German - DIN
    Learn More
    €112.00

  • NF EN IEC 60512-8-3, C93-400-8-3 (03/2018)

    Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3 : static load tests (fixed connectors) - Test 8c : robustness of actuating lever - Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 8-3: Essais de charge statique (embases) - Essai 8c: Robustesse de l'ergot d'activation
    3/1/2018 - Paper - French - AFNOR
    Learn More
    €63.42

  • NF EN IEC 60512-15-2, C93-400-15-2 (03/2018)

    Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2 : connector tests (mechanical) - Test 15b : insert retention in housing (axial) - Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 15-2 : essais (mécaniques) des connecteurs - Essai 15b : rétention de l'isolant dans le boîtier (axial)
    3/1/2018 - Paper - French - AFNOR
    Learn More
    €63.42

  • JIS C 5402-17-3:2018

    Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €32.50

  • DIN EN 61076-2-113 VDE 0687-2-113:2018-02

    Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz (IEC 61076-2-113:2017); German version EN 61076-2-113:2017
    2/1/2018 - Paper - German - VDE
    Learn More
    €98.49

  • PR NF EN 60512-28-100, C93-400-28-100PR (02/2018)

    Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g - Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 28-100 : Essais d'intégrité des signaux jusqu'à 2 000 MHz - Essais 28a à 28g
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €87.16

  • PR NF EN 61076-2-114, C93-406-2-114PR (02/2018)

    Connectors for electronic equipment - Product requirements - Part 2-114 : circular connectors - Detail specification for data and power connectors with M8 screw-locking - Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 2-114 : connecteurs circulaires - Spécification particulière pour les connecteurs pour transmission de puissance et de données avec verrouillage à vis M8
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €87.16

  • IEC 60512-8-3 (2018-01)

    IEC 60512-8-3:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever
    1/12/2018 - PDF - English, French - CEI
    Learn More
    €41.00

  • IEC 60512-15-2 (2018-01)

    IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
    1/12/2018 - PDF - English, French - CEI
    Learn More
    €20.00

  • IEC/PAS 61076-3-126 (2018-01)

    IEC PAS 61076-3-126:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
    1/9/2018 - PDF - English - CEI
    Learn More
    €244.00

  • EIA-364-78C:2018

    TP-78C Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors
    1/1/2018 - PDF sécurisé - English - EIA
    Learn More
    €67.50

  • VITA 46.9:2018

    PMC/XMC Rear I/O Fabric Signal Mapping on 3U and 6U VPX Modules Standard
    1/1/2018 - PDF - English - VITA
    Learn More
    €84.38

  • IEC 61076-3-119 (2017-12)

    IEC 61076-3-119:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
    12/8/2017 - PDF - English - CEI
    Learn More
    €203.00

  • IEC 61076-2-111 (2017-12)

    IEC 61076-2-111:2017 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
    12/7/2017 - PDF - English - CEI
    Learn More
    €305.00

  • PR NF EN 61076-3-123, C93-406-3-123PR (12/2017)

    Connectors for electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking - Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-123 : Connecteurs rectangulaires - Spécification particulière relative aux connecteurs hybrides dans des environnements industriels pour l'alimentation et la transmission de données fibronique, avec verrouillage de type
    12/1/2017 - Paper - French - AFNOR
    Learn More
    €78.69

  • BS EN 61000-4-39:2017

    Electromagnetic compatibilty (EMC). Testing and measurement techniques. Radiated fields in close proximity. Immunity test
    11/21/2017 - PDF - English - BSI
    Learn More
    €266.80

  • BS EN 61076-2-113:2017

    Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
    11/20/2017 - PDF - English - BSI
    Learn More
    €236.90

  • NF C05-625-2-4, NF EN 50625-2-4 (11/2017)

    Collection, logistics & treatment requirements for WEEE - Part 2-4 : treatment requirements for photovoltaic panels
    11/17/2017 - PDF - English - UTE
    Learn More
    €91.08

  • NF EN 50625-2-4, C05-625-2-4 (11/2017)

    Collection, logistics & treatment requirements for WEEE - Part 2-4 : treatment requirements for photovoltaic panels - Exigences de collecte, logistique et traitement pour les déchets d'équipements électriques et électroniques (DEEE) - Partie 2-4 : Exigences de traitement des panneaux photovoltaïques
    11/1/2017 - Paper - French - AFNOR
    Learn More
    €91.08

  • UNE-CLC/TS 50625-3-3:2017

    Collection, logistics & treatment requirements for WEEE - Part 3-3: Specification for de-pollution - WEEE containing CRTs and flat panel displays (Endorsed by Asociación Española de Normalización in November of 2017.)
    11/1/2017 - PDF - English - AENOR
    Learn More
    €74.00

  • UNE-CLC/TS 50625-5:2017

    Collection, logistics & Treatment requirements for WEEE - Part 5: Specification for the final treatment of WEEE fractions - Copper and precious metals (Endorsed by Asociación Española de Normalización in November of 2017.)
    11/1/2017 - PDF - English - AENOR
    Learn More
    €69.00

  • UNE-CLC/TS 50625-3-4:2017

    Collection, logistics & treatment requirements for WEEE - Part 3-4: Specification for de-pollution - temperature exchange equipment (Endorsed by Asociación Española de Normalización in November of 2017.)
    11/1/2017 - PDF - English - AENOR
    Learn More
    €98.00

  • ASTM F3291-17

    Standard Test Method for Measuring the Force-Resistance of a Membrane Force Sensor
    11/1/2017 - PDF - English - ASTM
    Learn More
    €38.00

  • UNE-EN 61076-3-122:2017

    Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (Endorsed by Asociación Española de Normalización in November of 2017.)
    11/1/2017 - PDF - English - AENOR
    Learn More
    €72.00

  • UNE-EN 61076-3-104:2017

    Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in November of 2017.)
    11/1/2017 - PDF - English - AENOR
    Learn More
    €28.00

  • EIA-364-117:2017

    TP-117 Dielectric Breakdown Voltage Test Procedure for Electrical Connectors, Sockets and Coaxial Contacts
    11/1/2017 - PDF sécurisé - English - EIA
    Learn More
    €68.40

  • BS EN 61076-3-104:2017

    Connectors for electrical and electronic equipment. Product requirements. Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
    10/24/2017 - PDF - English - BSI
    Learn More
    €303.60

  • JIS C 5630-26:2017

    Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures
    10/20/2017 - PDF - Japanese - JSA
    Learn More
    €36.27

  • 17/30361901 DC


    10/19/2017 - PDF - English - BSI
    Learn More
    €23.00

  • BS EN 61076-3-122:2017

    Connectors for electrical and electronic equipment. Product requirements. Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
    10/4/2017 - PDF - English - BSI
    Learn More
    €236.90

  • DIN CLC/TS 50625-4 VDE V 0042-13-4:2017-10

    Collection, logistics & treatment requirements for WEEE - Part 4: Specification for the collection and logistics associated with WEEE; German version CLC/TS 50625-4:2017
    10/1/2017 - Paper - German - VDE
    Learn More
    €61.54

  • DIN CLC/TS 50625-5 VDE V 0042-13-5:2017-10

    Collection, logistics & Treatment requirements for WEEE - Part 5: Specification for the final treatment of WEEE fractions - Copper and precious metals; German version CLC/TS 50625-5:2017
    10/1/2017 - Paper - German - VDE
    Learn More
    €77.84

  • PD CLC/TS 50625-4:2017

    Collection, logistics & treatment requirements for WEEE. Specification for the collection and logistics associated with WEEE
    9/7/2017 - PDF - English - BSI
    Learn More
    €144.90

  • DIN VDE 0042-14 VDE 0042-14:2017-09

    Requirements for the preparation for re-use of waste electrical and electronic equipment
    9/1/2017 - Paper - German - VDE
    Learn More
    €42.45

  • NF C93-406-2-113, NF EN 61076-2-113 (08/2017)

    Connectors for electronic equipment - Product requirements - Part 2-113 : circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
    8/5/2017 - PDF - English - UTE
    Learn More
    €112.42

  • NF EN 61076-2-113, C93-406-2-113 (08/2017)

    Connectors for electronic equipment - Product requirements - Part 2-113 : circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz - Connecteurs pour équipements électroniques - Exigences de produit - Partie 2-113 : Connecteurs circulaires - Spécification particulière relative aux connecteurs à contacts de puissance et de données, avec verrouillage à vis M12 pour des fréquences jusqu'à 100 MHz
    8/1/2017 - Paper - French - AFNOR
    Learn More
    €112.42

  • EIA JESD 214.01:2017

    Constant-Temperature Aging Method to Characterize Copper Interconnect Metallization for Stress-Induced Voiding
    8/1/2017 - PDF sécurisé - English - EIA
    Learn More
    €63.36

  • DIN EN 61076-8-100 VDE 0687-76-8-100:2017-07

    Connectors for electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 20 A (IEC 48B/2542/CD:2016)
    7/1/2017 - Paper - German - VDE
    Learn More
    €38.31

  • DIN EN 61076-8-101 VDE 0687-76-8-101:2017-07

    Connectors for electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 40 A (IEC 48B/2543/CD:2016)
    7/1/2017 - Paper - German - VDE
    Learn More
    €38.31

  • DIN EN 61076-8-102 VDE 0687-76-8-102:2017-07

    Connectors for electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 150 A (IEC 48B/2544/CD:2016)
    7/1/2017 - Paper - German - VDE
    Learn More
    €38.31

  • DIN EN 61076-3-124 VDE 0687-76-3-124:2017-07

    Connectors for electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10way, shielded, free and fixed rectangular connectors for I/O and data transmission capability with frequencies up to 500 MHz (IEC 48B/2552/CD:2017)
    7/1/2017 - Paper - German - VDE
    Learn More
    €38.31

  • DIN EN 60512-23-3 VDE 0687-512-23-3:2017-07

    Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories (IEC 48B/2559/CD:2017)
    7/1/2017 - Paper - German - VDE
    Learn More
    €18.19

  • DIN EN 60603-7-82 VDE 0687-7-82:2017-07

    Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz (IEC 60603-7-82:2016); German version EN 60603-7-82:2016
    7/1/2017 - Paper - German - VDE
    Learn More
    €61.54

  • UNE-EN 61076-2-113:2017

    Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz (Endorsed by Asociación Española de Normalización in July of 2017.)
    7/1/2017 - PDF - English - AENOR
    Learn More
    €75.00

  • CLC/TS 50625-4, W20-014-4 (06/2017)

    Collection, logistics & treatment requirements for WEEE - Part 4: Specification for the collection and logistics associated with WEEE - Exigences de collecte, logistique et traitement pour les déchets d'équipements électriques et électroniques (DEEE) - Partie 4: Spécifications relatives à la collecte et à la logistique associées aux DEEE
    6/1/2017 - Paper - French - AFNOR
    Learn More
    €54.95

  • VG 96944-1:2017-06

    Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 1: Requirements, tests, detail standard; Text in German and English
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €114.10

  • VG 96944-2:2017-06

    Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 2: Mounting, detail standard; Text in German and English
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €61.70

  • VG 96944-3:2017-06

    Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 3: Mating dimensions, detail standard; Text in German and English
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €75.40

  • VG 96944-4:2017-06

    Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 4: Dimensions, mass, detail standard; Text in German and English
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €68.30

  • VG 96944-5:2017-06

    Electrical connectors and plug-and-socket devices - connector with breaking capacity, L + N + PE with pilot contact, 250 V, 16 A, 3 L + N + PE with pilot contact, 500 V, 25 A, 3 L + N + PE with pilot contact, 500 V, 63 A, with threaded coupling, screened, pressure-water tight - Part 5: Contacts and contact inserts, detail standard; Text in German and English
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €89.00

  • DIN EN 61076-3-120 VDE 0687-76-3-120:2017-06

    Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A (IEC 61076-3-120:2016); German version EN 61076-3-120:2016
    6/1/2017 - Paper - German - VDE
    Learn More
    €77.84

  • DIN EN 61076-3-110 VDE 0687-76-3-110:2017-06

    Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz (IEC 61076-3-110:2016); German version EN 61076-3-110:2016
    6/1/2017 - Paper - German - VDE
    Learn More
    €61.54

  • 17/30352644 DC


    6/1/2017 - PDF - English - BSI
    Learn More
    €23.00

  • IEC 61076-3-122 (2017-05)

    IEC 61076-3-122:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
    5/22/2017 - PDF - English - CEI
    Learn More
    €203.00

  • DIN EN 62047-25:2017-04

    Semiconductor devices - Micro-electromechanical devices - Part 25: Silicon based MEMS fabrication technology - Measurement method of pull-press and shearing strength of micro bonding area (IEC 62047-25:2016); German version EN 62047-25:2016
    4/1/2017 - PDF - German - DIN
    Learn More
    €103.00

  • VG 95319-1006:2017-04

    Electrical connectors and plug-and-socket devices - Part 1006: Circular connectors with threaded coupling and removable crimp contacts, wall mounting flange (MIL-DTL-38999/20G with amendment 4); Text in German and English
    4/1/2017 - PDF - English, German - DIN
    Learn More
    €68.30

  • VG 95319-1007:2017-04

    Electrical connectors and plug-and-socket devices - Part 1007: Circular connectors with threaded coupling and removable crimp contacts, jam-nut mounting (MIL-DTL-38999/24J with amendment 2); Text in German and English
    4/1/2017 - PDF - English, German - DIN
    Learn More
    €68.30

  • VG 95319-1010:2017-04

    Electrical connectors and plug-and-socket devices - Part 1010: Jam nut for the single hole mounting of connectors according to VG 95319-1007 (MIL-DTL-38999/24J), detail standard; Text in German and English
    4/1/2017 - PDF - English, German - DIN
    Learn More
    €75.40

  • 17/30334978 DC


    3/6/2017 - PDF - English - BSI
    Learn More
    €23.00

  • NF EN 61076-3-120, C93-406-3-120 (03/2017)

    Connectors for electronic equipment - Product requirements - Part 3-120 : rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A - Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-120 : connecteurs rectangulaires - Spécification particulière pour connecteurs de puissance démontables à encliquetage pour une tension continue assignée de 250 V et un courant assigné de 30 A
    3/1/2017 - Paper - French - AFNOR
    Learn More
    €102.58

  • NF EN 60603-7-82, C93-430-7-82 (03/2017)

    Connectors for electronic equipment - Part 7-82 : detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz - Connecteurs pour équipements électroniques - Partie 7-82 : spécification particulière pour les fiches et les embases écrantées à 8 voies et 12 contacts pour la transmission de données à des fréquences jusqu'à 2 000 MHz
    3/1/2017 - Paper - French - AFNOR
    Learn More
    €77.83

  • NF C93-430-7-82, NF EN 60603-7-82 (03/2017)

    Connectors for electronic equipment - Part 7-82 : detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
    3/1/2017 - PDF - English - UTE
    Learn More
    €77.83

  • NF C93-406-3-120, NF EN 61076-3-120 (03/2017)

    Connectors for electronic equipment - Product requirements - Part 3-120 : rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    3/1/2017 - PDF - English - UTE
    Learn More
    €102.58

  • PD IEC/TS 61586:2017

    Estimation of the reliability of electrical connectors
    2/28/2017 - PDF - English - BSI
    Learn More
    €202.40

  • BS IEC 62946-02:2017

    Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission with frequencies up to 250 MHz and with current carrying capacity up to 1 A
    2/28/2017 - PDF - English - BSI
    Learn More
    €202.40

  • IEC 61076-2-113 (2017-02)

    IEC 61076-2-113:2017 Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
    2/21/2017 - PDF - English, French - CEI
    Learn More
    €203.00

  • VG 95319-100:2017-02

    Electrical connectors and plug-and-socket devices - Part 100: Expanded beam free connector (MIL-DTL-83526/20C with amendment 1), detail standard; Text in German and English
    2/1/2017 - PDF - English, German - DIN
    Learn More
    €142.10

  • VG 95319-101:2017-02

    Electrical connectors and plug-and-socket devices - Part 101: Expanded beam free connector (MIL-DTL-83526/21C with amendment 1), detail standard; Text in German and English
    2/1/2017 - PDF - English, German - DIN
    Learn More
    €125.30

  • UNE-EN 61076-3-120:2016

    Connectors for electronic equipment - product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 v d.c. And rated current of 30 a (Endorsed by Asociación Española de Normalización in February of 2017.)
    2/1/2017 - PDF - English - AENOR
    Learn More
    €69.00

  • UNE-EN 60603-7-82:2016

    Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz (Endorsed by Asociación Española de Normalización in February of 2017.)
    2/1/2017 - PDF - English - AENOR
    Learn More
    €63.00

  • BS EN 60603-7-82:2016

    Connectors for electronic equipment. Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
    1/31/2017 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN 61076-3-120:2016

    Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    1/31/2017 - PDF - English - BSI
    Learn More
    €202.40

  • IEC/TS 61586 (2017-01)

    IEC TS 61586:2017 Estimation of the reliability of electrical connectors
    1/25/2017 - PDF - English, French - CEI
    Learn More
    €173.00

  • IEC 62946-02 (2017-01)

    IEC 62946-02:2017 Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission up to 250 MHz and with current carrying capacity up to 1 A
    1/20/2017 - PDF - English - CEI
    Learn More
    €173.00

  • NF C93-406-3-110, NF EN 61076-3-110 (01/2017)

    Connectors for electronic equipment - Product requirements - Part 3-110 : detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 3 000 MHz
    1/14/2017 - PDF - English - UTE
    Learn More
    €77.83

  • IEEE 2700:2017

    IEEE Standard for Sensor Performance Parameter Definitions
    1/1/2017 - PDF - English - IEEE
    Learn More
    €75.24

  • NF EN 61076-3-110, C93-406-3-110 (01/2017)

    Connectors for electronic equipment - Product requirements - Part 3-110 : detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 3 000 MHz - Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-110 : spécification particulière pour les fiches et les embases blindées pour la transmission de données à des fréquences jusqu'à 3 000 MHz
    1/1/2017 - Paper - French - AFNOR
    Learn More
    €77.83

  • UNE-EN 61076-3-110:2016

    Connectors for electronic equipment - Product requirements - Part 3-110: detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 mhz (Endorsed by Asociación Española de Normalización in January of 2017.)
    1/1/2017 - PDF - English - AENOR
    Learn More
    €63.00

  • SCTE 185:2017

    Test Method for Cantilever Force, Female F Port
    1/1/2017 - PDF sécurisé - English - SCTE
    Learn More
    €42.50

  • BS EN 61076-3-110:2016

    Connectors for electronic equipment. Product requirements. Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
    12/31/2016 - PDF - English - BSI
    Learn More
    €202.40

  • JIS C 5402-8-2:2016

    Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-12-1:2016

    Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-12-2:2016

    Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-12-4:2016

    Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-12-5:2016

    Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 5402-22-1:2016

    Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
    12/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN EN 62047-26:2016-12

    Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures (IEC 62047-26:2016); German version EN 62047-26:2016
    12/1/2016 - PDF - German - DIN
    Learn More
    €114.10

  • DIN EN 62047-1:2016-12

    Semiconductor devices - Micro-electromechanical devices - Part 1: Terms and definitions (IEC 62047-1:2016); German version EN 62047-1:2016
    12/1/2016 - PDF - German - DIN
    Learn More
    €125.30

  • EIA-964:2016

    Specification for QSFP+ 10 Gb/s Pluggable Transceiver
    12/1/2016 - PDF sécurisé - English - EIA
    Learn More
    €186.56

  • DIN EN 61076-2-114 VDE 0687-2-114:2016-11

    Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking (IEC 48B/2503/CD:2016)
    11/1/2016 - Paper - German - VDE
    Learn More
    €42.45

  • DIN EN 60512-1 VDE 0687-512-1:2016-11

    Connectors for electronic equipment - Tests and measurements - Part 1: General (IEC 48B/2517/CD:2016)
    11/1/2016 - Paper - German - VDE
    Learn More
    €18.19

  • UNE-EN 61058-1-1:2016

    Switches for appliances - Part 1-1: Requirements for mechanical switches (Endorsed by AENOR in November of 2016.)
    11/1/2016 - PDF - English - AENOR
    Learn More
    €62.00

  • UNE-EN 61058-1-2:2016

    Switches for appliances - Part 1-2: Requirements for electronic switches (Endorsed by AENOR in November of 2016.)
    11/1/2016 - PDF - English - AENOR
    Learn More
    €66.00

  • DIN EN 60603-7-81 VDE 0687-603-7-81:2016-10

    Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2000 MHz (IEC 60603-7-81:2015); German version EN 60603-7-81:2016
    10/1/2016 - Paper - German - VDE
    Learn More
    €61.54

  • ASTM B1004-16

    Standard Practice for Contact Performance Classification of Electrical Connection Systems
    10/1/2016 - PDF - English - ASTM
    Learn More
    €38.00

  • DIN EN 61076-4-116 VDE 0687-76-4-116:2016-09

    Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (IEC 61076-4-116:2012 + A1:2015); German version EN 61076-4-116:2012 + A1:2016
    9/1/2016 - Paper - German - VDE
    Learn More
    €121.28

  • IEC 61076-3-110 (2016-08)

    IEC 61076-3-110:2016 Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
    8/30/2016 - PDF - English, French - CEI
    Learn More
    €102.00

  • IEC 60603-7-82 (2016-08)

    IEC 60603-7-82:2016 Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
    8/25/2016 - PDF - English, French - CEI
    Learn More
    €102.00

  • IEC 61076-3-120 (2016-08)

    IEC 61076-3-120:2016 Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
    8/25/2016 - PDF - English, French - CEI
    Learn More
    €142.00

  • MIL-DTL-38999/20:2016

    Connectors, Electrical, Circular, Receptacle, Threaded, Wall Mounting Flange, Removable Crimp Contacts, Series III, Metric
    8/5/2016 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MIL-DTL-38999/24:2016

    Connectors, Electrical, Circular, Receptacle, Threaded, Jam-Nut Mounting, Removable Crimp Contacts, Series III, Metric
    8/5/2016 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • NF EN 60603-7-81, C93-430-7-81 (08/2016)

    Connectors for electronic equipment - Part 7-81 : detail specification for 8- way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz - Connecteurs pour équipements électroniques - Partie 7-81 : spécification particulière pour les fiches et les embases blindées à 8 voies pour la transmission de données à des fréquences jusqu'à 2 000 MHz
    8/1/2016 - Paper - French - AFNOR
    Learn More
    €91.08

  • ITU-T L.1102

    Use of printed labels for communicating information on rare metals in information and communication technology goods
    7/1/2016 - PDF - English - ITU
    Learn More
    €25.00

  • VG 95345-23:2016-07

    Electrical and electronic circuit breakers - Part 23: Special fittings for circuit breakers according to VG 95345-6, VG 95345-11, VG 95345-17, VG 95345-20 and VG 95345-21, detail standard; Text in German and English
    7/1/2016 - PDF - English, German - DIN
    Learn More
    €112.00

  • DIN EN 60512-28-100 VDE 0687-512-28-100:2016-06

    Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2000 MHz for IEC 60603-7 and IEC 61076-3 series connectors -Tests 28a to 28g (IEC 48B/2470/CD:2015)
    6/1/2016 - Paper - German - VDE
    Learn More
    €42.45

  • EIA-364-118:2016

    Thermal Shock for Hermetic Electrical Connectors and Sockets
    6/1/2016 - PDF sécurisé - English - EIA
    Learn More
    €67.50

  • PD IEC/PAS 61076-2-114:2016

    Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for data and power connectors with M8 screw-locking
    5/31/2016 - PDF - English - BSI
    Learn More
    €266.80

  • UNE-EN 61009-1:2013/A12:2016

    Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
    5/25/2016 - PDF - English - AENOR
    Learn More
    €27.60

  • UNE-EN 61009-1:2013/A12:2016

    Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
    5/25/2016 - PDF - Spanish - AENOR
    Learn More
    €23.00

  • IEC/PAS 61076-2-114 (2016-05)

    IEC PAS 61076-2-114:2016 Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking
    5/12/2016 - PDF - English - CEI
    Learn More
    €244.00

  • DIN EN 62946-01 VDE 0687-461:2016-05

    Connectors for electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transfer and with current up to 1A (IEC 48B/2466/CD:2015)
    5/1/2016 - Paper - German - VDE
    Learn More
    €29.12

  • NF EN 61076-4-116/A1, C93-406-4-116/A1 (05/2016)

    Connectors for electronic equipment - Product requirements - Part 4-116 : printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function - Connecteurs pour équipements électroniques - Exigences de produit
    5/1/2016 - Paper - French - AFNOR
    Learn More
    €63.42

  • UNE-EN 61076-4-116:2012/A1:2016

    Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (Endorsed by AENOR in May of 2016.)
    5/1/2016 - PDF - English - AENOR
    Learn More
    €42.00

  • UNE-EN 60603-7-81:2016

    Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz (Endorsed by AENOR in May of 2016.)
    5/1/2016 - PDF - English - AENOR
    Learn More
    €63.00

  • ASTM F3152-16

    Standard Test Method for Determining Abrasion Resistance of Inks and Coatings on Substrates Using Dry or Wet Abrasive Medium
    5/1/2016 - PDF - English - ASTM
    Learn More
    €38.00

Items 1 to 200 of 1861 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10