Call +33 (1) 40 02 03 05

25.220.20 : Surface treatment

Items 1 to 200 of 896 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • PR NF A91-480, PR NF EN ISO 2106 (03/2019)

    Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
    3/29/2019 - Paper - French - AFNOR
    Learn More
    €72.38

  • ISO 2376:2019

    Anodizing of aluminium and its alloys -- Determination of breakdown voltage and withstand voltage
    3/1/2019 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2376:2019

    Anodizing of aluminium and its alloys -- Determination of breakdown voltage and withstand voltage
    3/1/2019 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 2063-1:2019

    Thermal spraying -- Zinc, aluminium and their alloys -- Part 1: Design considerations and quality requirements for corrosion protection systems
    2/1/2019 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 2063-1:2019

    Thermal spraying -- Zinc, aluminium and their alloys -- Part 1: Design considerations and quality requirements for corrosion protection systems
    2/1/2019 - Paper - French - ISO
    Learn More
    €144.00

  • ISO 18771:2019

    Anodizing of aluminium and its alloys -- Method to test the surface abrasion resistance using glass-coated abrasive paper
    2/1/2019 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 10111:2019

    Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods
    1/1/2019 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 10111:2019

    Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods
    1/1/2019 - Paper - French - ISO
    Learn More
    €61.00

  • PR NF A91-201-1 PR NF EN ISO 2063-1(2018)

    Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems
    12/20/2018 - Paper - French - AFNOR
    Learn More
    €112.59

  • DIN EN ISO 8251:2018-12

    Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018); German version EN ISO 8251:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €114.10

  • DIN EN ISO 2085:2018-12

    Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018); German version EN ISO 2085:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • DIN EN ISO 2085:2018-12

    Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018); German version EN ISO 2085:2018
    12/1/2018 - PDF - English - DIN
    Learn More
    €51.00

  • DIN EN ISO 6581:2018-12

    Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018); German version EN ISO 6581:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • DIN EN ISO 6581:2018-12

    Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018); German version EN ISO 6581:2018
    12/1/2018 - PDF - English - DIN
    Learn More
    €59.60

  • DIN EN ISO 2063-1:2018-12

    Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO/FDIS 2063-1:2018); German and English version prEN ISO 2063-1:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €114.10

  • DIN EN ISO 8993:2018-12

    Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018); German version EN ISO 8993:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €75.40

  • ISO 8994:2018

    Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Grid method
    11/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 8994:2018

    Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Grid method
    11/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 3211:2018

    Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to cracking by deformation
    11/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 3211:2018

    Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to cracking by deformation
    11/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • BS EN ISO 8993:2018

    Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method
    10/31/2018 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN ISO 6581:2018

    Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
    10/8/2018 - PDF - English - BSI
    Learn More
    €121.90

  • BS EN ISO 2085:2018

    Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
    10/5/2018 - PDF - English - BSI
    Learn More
    €121.90

  • NF A91-492, NF EN ISO 8993 (10/2018)

    Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €53.41

  • DIN EN 13507:2018-10

    Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2018
    10/1/2018 - PDF - German - DIN
    Learn More
    €54.80

  • DIN EN 17001:2018-10

    Thermal spraying - Components with thermally sprayed coatings - Coating specification; German version EN 17001:2018
    10/1/2018 - PDF - German - DIN
    Learn More
    €54.80

  • DIN EN 17002:2018-10

    Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification; German version EN 17002:2018
    10/1/2018 - PDF - German - DIN
    Learn More
    €61.70

  • DIN EN 1395-5:2018-10

    Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers; German version EN 1395-5:2018
    10/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • DIN EN 17059:2018-10

    Plating and anodizing lines - Safety requirements; German version EN 17059:2018
    10/1/2018 - PDF - German - DIN
    Learn More
    €169.80

  • DIN EN 13507:2018-10

    Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2018
    10/1/2018 - PDF - English - DIN
    Learn More
    €68.50

  • DIN EN 17001:2018-10

    Thermal spraying - Components with thermally sprayed coatings - Coating specification; German version EN 17001:2018
    10/1/2018 - PDF - English - DIN
    Learn More
    €68.50

  • DIN EN 17002:2018-10

    Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification; German version EN 17002:2018
    10/1/2018 - PDF - English - DIN
    Learn More
    €77.20

  • DIN EN 1395-5:2018-10

    Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers; German version EN 1395-5:2018
    10/1/2018 - PDF - English - DIN
    Learn More
    €85.50

  • DIN EN 17059:2018-10

    Plating and anodizing lines - Safety requirements; German version EN 17059:2018
    10/1/2018 - PDF - English - DIN
    Learn More
    €212.40

  • ASTM E1575-18

    Standard Practice for Pressure Water Cleaning and Cutting
    10/1/2018 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM E1575-18 + Redline

    Standard Practice for Pressure Water Cleaning and Cutting
    10/1/2018 - PDF - English - ASTM
    Learn More
    €52.00

  • NF A91-479, NF EN ISO 2085 (09/2018)

    Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
    9/26/2018 - Paper - French - AFNOR
    Learn More
    €30.64

  • NF A91-487, NF EN ISO 6581 (09/2018)

    Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
    9/26/2018 - Paper - French - AFNOR
    Learn More
    €30.64

  • BS EN ISO 8251:2018

    Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
    9/20/2018 - PDF - English - BSI
    Learn More
    €236.90

  • NF A91-491, NF EN ISO 8251 (09/2018)

    Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
    9/12/2018 - Paper - French - AFNOR
    Learn More
    €87.56

  • DIN EN ISO 14918:2018-09

    Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018); German version EN ISO 14918:2018
    9/1/2018 - PDF - German - DIN
    Learn More
    €96.00

  • DIN EN ISO 14918:2018-09

    Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018); German version EN ISO 14918:2018
    9/1/2018 - PDF - English - DIN
    Learn More
    €120.20

  • DIN EN ISO 2143:2018-09

    Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017); German version EN ISO 2143:2017
    9/1/2018 - PDF - German - DIN
    Learn More
    €61.70

  • DIN EN ISO 2143:2018-09

    Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017); German version EN ISO 2143:2017
    9/1/2018 - PDF - English - DIN
    Learn More
    €77.20

  • DVS 2312:2018-09


    9/1/2018 - PDF - German - DVS
    Learn More
    €50.70

  • DVS 2318:2018-09


    9/1/2018 - PDF - German - DVS
    Learn More
    €70.85

  • DVS 2319:2018-09


    9/1/2018 - PDF - German - DVS
    Learn More
    €41.08

  • ISO 8993:2018

    Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Chart method
    9/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 8993:2018

    Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Chart method
    9/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • BS EN 17001:2018

    Thermal spraying. Components with thermally sprayed coatings. Coating specification
    8/15/2018 - PDF - English - BSI
    Learn More
    €121.90

  • BS EN 17002:2018

    Thermal spraying. Components with thermally sprayed coatings. Thermal spray procedure specification
    8/15/2018 - PDF - English - BSI
    Learn More
    €121.90

  • BS EN 1395-5:2018

    Thermal spraying. Acceptance inspection of thermal spraying equipment. Plasma spraying in chambers
    8/15/2018 - PDF - English - BSI
    Learn More
    €144.90

  • NF A91-226-5, NF EN 1395-5 (08/2018)

    Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5 : plasma spraying in chambers
    8/8/2018 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF A91-224, NF EN 13507 (08/2018)

    Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
    8/8/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF A91-243, NF EN 17001 (08/2018)

    Thermal spraying - Components with thermally sprayed coatings - Coating specification
    8/8/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF A91-242, NF EN 17002 (08/2018)

    Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
    8/8/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • DVS 2301:2018-08


    8/1/2018 - PDF - German - DVS
    Learn More
    €91.13

  • ISO 8251:2018

    Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings
    8/1/2018 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 8251:2018

    Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings
    8/1/2018 - Paper - French - ISO
    Learn More
    €144.00

  • ISO 2085:2018

    Anodizing of aluminium and its alloys -- Check for continuity of thin anodic oxidation coatings -- Copper sulfate test
    8/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2085:2018

    Anodizing of aluminium and its alloys -- Check for continuity of thin anodic oxidation coatings -- Copper sulfate test
    8/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 6581:2018

    Anodizing of aluminium and its alloys -- Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
    8/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 6581:2018

    Anodizing of aluminium and its alloys -- Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
    8/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • NBN EN 17059:2018

    Plating and anodizing lines - Safety requirements
    7/25/2018 - PDF - English - NBN
    Learn More
    €105.00

  • NBN EN 17059:2018

    Plating and anodizing lines - Safety requirements
    7/25/2018 - PDF - French - NBN
    Learn More
    €105.00

  • NBN EN ISO 14918:2018

    Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
    7/25/2018 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN ISO 14918:2018

    Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
    7/25/2018 - PDF - French - NBN
    Learn More
    €56.00

  • BS ISO 21164:2018

    Metallic and other inorganic coatings. DC magnetron sputtered silver coatings for engineering purposes. Measurement of coating adhesion
    7/20/2018 - PDF - English - BSI
    Learn More
    €121.90

  • UNE-EN ISO 2063-1:2018

    Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017)
    7/4/2018 - PDF - Spanish - AENOR
    Learn More
    €61.00

  • UNE-EN ISO 2063-2:2018

    Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
    7/4/2018 - PDF - Spanish - AENOR
    Learn More
    €70.00

  • DIN EN ISO 7668:2018-07

    Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees (ISO 7668:2018); German version EN ISO 7668:2018
    7/1/2018 - PDF - German - DIN
    Learn More
    €82.60

  • UNE-EN 17059:2018

    Plating and anodizing lines - Safety requirements (Endorsed by Asociación Española de Normalización in July of 2018.)
    7/1/2018 - PDF - English - AENOR
    Learn More
    €123.00

  • ISO 21164:2018

    Metallic and other inorganic coatings -- DC magnetron sputtered silver coatings for engineering purposes -- Measurement of coating adhesion
    7/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • PR NF A91-125, PR NF EN ISO 10111 (06/2018)

    Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
    6/18/2018 - Paper - English, French - AFNOR
    Learn More
    €76.80

  • BS EN 17059:2018

    Plating and anodizing lines. Safety requirements
    6/13/2018 - PDF - English - BSI
    Learn More
    €303.60

  • BS EN ISO 14918:2018

    Thermal spraying. Qualification testing of thermal sprayers
    6/13/2018 - PDF - English - BSI
    Learn More
    €202.40

  • NF T35-024, NF EN 17059 (06/2018)

    Plating and anodizing lines - safety requirements
    6/6/2018 - Paper - French - AFNOR
    Learn More
    €136.35

  • NF A91-221, NF EN ISO 14918 (06/2018)

    Thermal spraying - Qualification testing of thermal sprayers
    6/6/2018 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF A91-221, NF EN ISO 14918 (06/2018)

    Thermal spraying - Qualification testing of thermal sprayers
    6/6/2018 - Paper - English - AFNOR
    Learn More
    €76.40

  • DIN EN ISO 10215:2018-06

    Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018); German version EN ISO 10215:2018
    6/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • NF A91-494, NF EN ISO 10215 (05/2018)

    Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method
    5/11/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF A91-494, NF EN ISO 10215 (05/2018)

    Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method
    5/11/2018 - Paper - English - AFNOR
    Learn More
    €42.41

  • DIN EN ISO 7599:2018-05

    Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018); German version EN ISO 7599:2018
    5/1/2018 - PDF - German - DIN
    Learn More
    €96.00

  • DIN EN ISO 7599:2018-05

    Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018); German version EN ISO 7599:2018
    5/1/2018 - PDF - English - DIN
    Learn More
    €120.20

  • NBN EN ISO 10215:2018

    Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
    4/27/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 10215:2018

    Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
    4/27/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 10215:2018

    Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
    4/27/2018 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 7668:2018

    Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees (ISO 7668:2018)
    4/27/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 7668:2018

    Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees (ISO 7668:2018)
    4/27/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 7668:2018

    Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees (ISO 7668:2018)
    4/27/2018 - PDF - French - NBN
    Learn More
    €45.00

  • BS EN ISO 10215:2018

    Anodizing of aluminium and its alloys. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
    4/20/2018 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN ISO 7668:2018

    Anodizing of aluminium and its alloys. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
    4/18/2018 - PDF - English - BSI
    Learn More
    €144.90

  • ASD-STAN prEN 4707 (11/04/2018)

    Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
    4/11/2018 - PDF - English - ASD-STAN
    Learn More
    €56.00

  • DIN EN ISO 2931:2018-04

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017); German version EN ISO 2931:2018
    4/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • DIN EN ISO 2931:2018-04

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017); German version EN ISO 2931:2018
    4/1/2018 - PDF - English - DIN
    Learn More
    €103.10

  • ISO 14918:2018

    Thermal spraying -- Qualification testing of thermal sprayers
    4/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 14918:2018

    Thermal spraying -- Qualification testing of thermal sprayers
    4/1/2018 - Paper - French - ISO
    Learn More
    €123.00

  • NBN EN ISO 7599:2018

    Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
    3/23/2018 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN ISO 7599:2018

    Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
    3/23/2018 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN ISO 7599:2018

    Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
    3/23/2018 - PDF - French - NBN
    Learn More
    €56.00

  • NF A91-489, NF EN ISO 7668 (03/2018)

    Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
    3/21/2018 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF A91-489, NF EN ISO 7668 (03/2018)

    Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
    3/21/2018 - Paper - English - AFNOR
    Learn More
    €66.72

  • BS EN ISO 17836:2017

    Thermal spraying. Determination of the deposition efficiency for thermal spraying
    3/9/2018 - PDF - English - BSI
    Learn More
    €144.90

  • DIN EN ISO 17836:2018-03

    Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017); German version EN ISO 17836:2017
    3/1/2018 - PDF - German - DIN
    Learn More
    €75.40

  • DIN EN ISO 3210:2018-03

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017); German version EN ISO 3210:2017
    3/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • DIN EN ISO 27830:2018-03

    Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017); German version EN ISO 27830:2017
    3/1/2018 - PDF - German - DIN
    Learn More
    €75.40

  • DIN EN ISO 17836:2018-03

    Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017); German version EN ISO 17836:2017
    3/1/2018 - PDF - English - DIN
    Learn More
    €94.40

  • DIN EN ISO 27830:2018-03

    Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017); German version EN ISO 27830:2017
    3/1/2018 - PDF - English - DIN
    Learn More
    €94.40

  • DIN EN ISO 3210:2018-03

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017); German version EN ISO 3210:2017
    3/1/2018 - PDF - English - DIN
    Learn More
    €103.10

  • NBN EN ISO 2931:2018

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
    2/28/2018 - PDF - German - NBN
    Learn More
    €30.00

  • NBN EN ISO 2931:2018

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
    2/28/2018 - PDF - English - NBN
    Learn More
    €30.00

  • NBN EN ISO 2931:2018

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
    2/28/2018 - PDF - French - NBN
    Learn More
    €30.00

  • BS EN ISO 7599:2018

    Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium
    2/23/2018 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN ISO 2931:2018

    Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
    2/21/2018 - PDF - English - BSI
    Learn More
    €121.90

  • JIS H 8453:2018

    Measurement method for thermal conductivity of thermal barrier coatings
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €36.27

  • PR NF A91-493, PR NF EN ISO 8994 (02/2018)

    Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method
    2/16/2018 - Paper - English, French - AFNOR
    Learn More
    €63.03

  • NF A91-450, NF EN ISO 7599 (02/2018)

    Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium
    2/14/2018 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF A91-484, NF EN ISO 2931 (02/2018)

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
    2/7/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF A91-484, NF EN ISO 2931 (02/2018)

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
    2/7/2018 - Paper - English - AFNOR
    Learn More
    €42.41

  • DIN EN ISO 2063-1:2018-02

    Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017); German version EN ISO 2063-1:2017
    2/1/2018 - PDF - German - DIN
    Learn More
    €114.10

  • DIN EN ISO 2063-2:2018-02

    Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017); German version EN ISO 2063-2:2017
    2/1/2018 - PDF - German - DIN
    Learn More
    €125.30

  • DIN EN ISO 9717:2018-02

    Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017); German version EN ISO 9717:2017
    2/1/2018 - PDF - German - DIN
    Learn More
    €82.60

  • DIN EN ISO 2063-1:2018-02

    Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017); German version EN ISO 2063-1:2017
    2/1/2018 - PDF - English - DIN
    Learn More
    €142.80

  • DIN EN ISO 2063-2:2018-02

    Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017); German version EN ISO 2063-2:2017
    2/1/2018 - PDF - English - DIN
    Learn More
    €156.50

  • VDI 3416 Blatt 1:2018-02

    Machine hammer peening - Basic principles
    2/1/2018 - PDF - German - VDI
    Learn More
    €83.07

  • DIN EN ISO 9717:2018-02

    Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017); German version EN ISO 9717:2017
    2/1/2018 - PDF - English - DIN
    Learn More
    €103.10

  • ISO 7668:2018

    Anodizing of aluminium and its alloys -- Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
    2/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 7668:2018

    Anodizing of aluminium and its alloys -- Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
    2/1/2018 - Paper - French - ISO
    Learn More
    €92.00

  • NBN EN ISO 17836:2018

    Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
    1/30/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 17836:2018

    Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
    1/30/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 17836:2018

    Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
    1/30/2018 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 3210:2018

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
    1/30/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 3210:2018

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
    1/30/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 3210:2018

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
    1/30/2018 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 27830:2018

    Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
    1/30/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 27830:2018

    Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
    1/30/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 27830:2018

    Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017)
    1/30/2018 - PDF - French - NBN
    Learn More
    €45.00

  • NF A91-050, NF EN ISO 27830 (01/2018)

    Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings
    1/27/2018 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF A91-050, NF EN ISO 27830 (01/2018)

    Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings
    1/27/2018 - Paper - English - AFNOR
    Learn More
    €53.41

  • BS EN ISO 3210:2017

    Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
    1/26/2018 - PDF - English - BSI
    Learn More
    €121.90

  • NF A91-227, NF EN ISO 17836 (01/2018)

    Thermal spraying - Determination of the deposition efficiency for thermal spraying
    1/20/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF A91-227, NF EN ISO 17836 (01/2018)

    Thermal spraying - Determination of the deposition efficiency for thermal spraying
    1/20/2018 - Paper - English - AFNOR
    Learn More
    €42.41

  • BS EN ISO 27830:2017

    Metallic and other inorganic coatings. Requirements for the designation of metallic and inorganic coatings
    1/15/2018 - PDF - English - BSI
    Learn More
    €144.90

  • PD ISO/TS 16688:2017

    Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
    1/11/2018 - PDF - English - BSI
    Learn More
    €236.90

  • DIN 50938:2018-01

    Black oxide coatings on ferrous metal components - Requirements and test methods
    1/1/2018 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 19279:2018-01

    Photocatalytic activity of surfaces - Determination of the photocatalytic deposition velocity of nitrogen monoxide at photocatalytically active surfaces
    1/1/2018 - PDF - German - DIN
    Learn More
    €75.40

  • ISO 7599:2018

    Anodizing of aluminium and its alloys -- Method for specifying decorative and protective anodic oxidation coatings on aluminium
    1/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 7599:2018

    Anodizing of aluminium and its alloys -- Method for specifying decorative and protective anodic oxidation coatings on aluminium
    1/1/2018 - Paper - French - ISO
    Learn More
    €123.00

  • ISO 10215:2018

    Anodizing of aluminium and its alloys -- Visual determination of image clarity of anodic oxidation coatings -- Chart scale method
    1/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 10215:2018

    Anodizing of aluminium and its alloys -- Visual determination of image clarity of anodic oxidation coatings -- Chart scale method
    1/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • NF L10-318, NF EN 4729 (12/2017)

    Aerospace series - Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys
    12/22/2017 - Paper - English, French - AFNOR
    Learn More
    €66.72

  • PR NF A91-483, PR NF EN ISO 2376 (12/2017)

    Anodizing of aluminium and its alloys - Determination of electric breakdown potential
    12/22/2017 - Paper - English, French - AFNOR
    Learn More
    €54.95

  • PR NF A91-486, PR NF EN ISO 3211 (12/2017)

    Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation
    12/22/2017 - Paper - English, French - AFNOR
    Learn More
    €54.95

  • NBN EN ISO 2143:2017

    Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
    12/21/2017 - PDF - German - NBN
    Learn More
    €30.00

  • NBN EN ISO 2143:2017

    Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
    12/21/2017 - PDF - English - NBN
    Learn More
    €30.00

  • NBN EN ISO 2143:2017

    Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
    12/21/2017 - PDF - French - NBN
    Learn More
    €30.00

  • ASTM E161-17

    Standard Specification for Electroformed Material and Test Sieves
    12/15/2017 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM E161-17 + Redline

    Standard Specification for Electroformed Material and Test Sieves
    12/15/2017 - PDF - English - ASTM
    Learn More
    €45.00

  • BS EN ISO 2143:2017

    Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxidation coatings after sealing. Dye-spot test with prior acid treatment
    12/11/2017 - PDF - English - BSI
    Learn More
    €144.90

  • NF A91-485, NF EN ISO 3210 (12/2017)

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
    12/6/2017 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF A91-485, NF EN ISO 3210 (12/2017)

    Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
    12/6/2017 - Paper - English - AFNOR
    Learn More
    €42.41

  • BS ISO 10074:2017

    Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys
    11/24/2017 - PDF - English - BSI
    Learn More
    €202.40

  • NF A91-482, NF EN ISO 2143 (11/2017)

    Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment
    11/22/2017 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF A91-482, NF EN ISO 2143 (11/2017)

    Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment
    11/22/2017 - Paper - English - AFNOR
    Learn More
    €42.41

  • NBN EN ISO 9717:2017

    Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
    11/22/2017 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 9717:2017

    Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
    11/22/2017 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 9717:2017

    Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)
    11/22/2017 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 2063-2:2017

    Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
    11/22/2017 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN ISO 2063-2:2017

    Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
    11/22/2017 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN ISO 2063-2:2017

    Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
    11/22/2017 - PDF - French - NBN
    Learn More
    €77.00

  • JIS H 8304:2017

    Ceramic sprayed coatings
    11/20/2017 - PDF - Japanese - JSA
    Learn More
    €36.27

  • BS EN ISO 9717:2017

    Metallic and other inorganic coatings. Phosphate conversion coating of metals
    11/9/2017 - PDF - English - BSI
    Learn More
    €144.90

  • UNE 38019:2017

    Anodizing of aluminium and its alloys. Vocabulary.
    11/2/2017 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • DIN EN ISO 2376:2017-11

    Anodizing of aluminium and its alloys - Determination of electric breakdown potential (ISO/DIS 2376:2017); German and English version prEN ISO 2376:2017
    11/1/2017 - PDF - English, German - DIN
    Learn More
    €47.60

  • ISO/TS 16688:2017

    Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
    11/1/2017 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 27830:2017

    Metallic and other inorganic coatings -- Requirements for the designation of metallic and inorganic coatings
    11/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 27830:2017

    Metallic and other inorganic coatings -- Requirements for the designation of metallic and inorganic coatings
    11/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 10074:2017

    Anodizing of aluminium and its alloys -- Specification for hard anodic oxidation coatings on aluminium and its alloys
    11/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 2931:2017

    Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
    11/1/2017 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2931:2017

    Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
    11/1/2017 - Paper - French - ISO
    Learn More
    €40.00

  • NF A91-113, NF EN ISO 2360 (10/2017)

    Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
    10/27/2017 - Paper - French - AFNOR
    Learn More
    €119.96

  • NF A91-113, NF EN ISO 2360 (10/2017)

    Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
    10/27/2017 - Paper - English - AFNOR
    Learn More
    €87.56

  • BS ISO 2135:2017

    Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
    10/25/2017 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 10216:2017

    Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method
    10/25/2017 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN ISO 2063-2:2017

    Thermal spraying. Zinc, aluminium and their alloys. Execution of corrosion protection systems
    10/23/2017 - PDF - English - BSI
    Learn More
    €257.60

  • NF A91-201-2, NF EN ISO 2063-2 (10/2017)

    Thermal spraying - Zinc, aluminium and their alloys - Part 2 : execution of corrosion protection systems
    10/11/2017 - Paper - French - AFNOR
    Learn More
    €95.37

  • UNE-EN ISO 14917:2017

    Thermal spraying - Terminology, classification (ISO 14917:2017)
    10/11/2017 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN ISO 14916:2017

    Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017)
    10/11/2017 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN ISO 14232-1:2017

    Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017)
    10/11/2017 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • NF A91-201-1, NF EN ISO 2063-1 (10/2017)

    Thermal spraying - Zinc, aluminium and their alloys - Part 1 : design considerations and quality requirements for corrosion protection systems
    10/11/2017 - Paper - French - AFNOR
    Learn More
    €87.56

  • NF A91-201-1, NF EN ISO 2063-1 (10/2017)

    Thermal spraying - Zinc, aluminium and their alloys - Part 1 : design considerations and quality requirements for corrosion protection systems
    10/11/2017 - Paper - English - AFNOR
    Learn More
    €87.56

  • NF A91-201-2, NF EN ISO 2063-2 (10/2017)

    Thermal spraying - Zinc, aluminium and their alloys - Part 2 : execution of corrosion protection systems
    10/11/2017 - Paper - English - AFNOR
    Learn More
    €95.37

  • ISO 3210:2017

    Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
    10/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 3210:2017

    Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
    10/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 17836:2017

    Thermal spraying -- Determination of the deposition efficiency for thermal spraying
    10/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 17836:2017

    Thermal spraying -- Determination of the deposition efficiency for thermal spraying
    10/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 2135:2017

    Anodizing of aluminium and its alloys -- Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
    10/1/2017 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10216:2017

    Anodizing of aluminium and its alloys -- Instrumental determination of image clarity of anodic oxidation coatings -- Instrumental method
    10/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 2143:2017

    Anodizing of aluminium and its alloys -- Estimation of loss of absorptive power of anodic oxidation coatings after sealing -- Dye-spot test with prior acid treatment
    10/1/2017 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2143:2017

    Anodizing of aluminium and its alloys -- Estimation of loss of absorptive power of anodic oxidation coatings after sealing -- Dye-spot test with prior acid treatment
    10/1/2017 - Paper - French - ISO
    Learn More
    €40.00

Items 1 to 200 of 896 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5