Closure for annual leave, no order will be honored August 1 to August 19, 2019 included.

Call +33 (1) 40 02 03 05
Type de carte de crédit

25.140 : Hand-held tools

Items 1 to 200 of 1768 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  • NBN EN ISO 28927-8:2009/A2:2019

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 2: Oscillating knives (vibrating screen removal tools) (ISO 28927-8:2009/Amd 2:2019)
    7/24/2019 - PDF - English - NBN
    Learn More
    €30.00

  • BS EN ISO 28927-8:2009+A2:2019


    7/15/2019 - PDF - English - BSI
    Learn More
    €236.90

  • 19/30365943 DC


    7/9/2019 - PDF - English - BSI
    Learn More
    €23.00

  • 19/30362556 DC


    7/9/2019 - PDF - English - BSI
    Learn More
    €23.00

  • IEC 62841-3-4 Edition 1.1 (2019-07)

    IEC 62841-3-4:2016+AMD1:2019 consolidated version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
    7/2/2019 - PDF - English, French - CEI
    Learn More
    €203.00

  • IEC 62841-3-4 AMD 1 (2019-07)

    IEC 62841-3-4:2016/AMD1:2019 Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
    7/2/2019 - PDF - English, French - CEI
    Learn More
    €10.00

  • BS EN 62841-2-21:2019


    6/27/2019 - PDF - English - BSI
    Learn More
    €202.40

  • PR NF EN ISO 28927-13, E90-321-13PR (05/2019)


    5/1/2019 - Paper - French - AFNOR
    Learn More
    €95.10

  • PR NF ISO 21982, E74-328PR (05/2019)


    5/1/2019 - Paper - French - AFNOR
    Learn More
    €78.60

  • UNE-EN ISO 11148-13:2018

    Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017) (Endorsed by Asociación Española de Normalización in April of 2019.)
    4/1/2019 - PDF - English - AENOR
    Learn More
    €94.00

  • NF EN 50632-1/A1, C75-132-1/A1 (04/2019)


    4/1/2019 - Paper - French - AFNOR
    Learn More
    €48.40

  • 19/30366888 DC


    3/26/2019 - PDF - English - BSI
    Learn More
    €23.00

  • SAE AS 22520/1B:2019-03-18

    CRIMPING TOOLS, TYPE I, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 12 THROUGH 22 AND COAXIAL INNER CONTACTS
    3/18/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AS 5259/7B:2019-03-15

    CRIMPING TOOL AND ACCESSORIES, DIES, WIRE SIZE 8 TO 0000 UN-INSULATED AND INSULATED CRIMP BARRELS
    3/15/2019 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AS 5259/6B:2019-03-08

    CRIMPING TOOL AND ACCESSORIES, INSPECTION GAGES, FOR AS5259 DIES
    3/8/2019 - PDF - English - SAE
    Learn More
    €73.00

  • FD ISO/TR 20571, E90-322 (03/2019)


    3/1/2019 - Paper - French - AFNOR
    Learn More
    €87.56

  • UNE-EN ISO 6789-1:2019

    Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017)
    2/13/2019 - PDF - English - AENOR
    Learn More
    €74.40

  • UNE-EN ISO 6789-1:2019

    Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017)
    2/13/2019 - PDF - Spanish - AENOR
    Learn More
    €62.00

  • UNE-EN ISO 6789-2:2019

    Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017)
    2/13/2019 - PDF - English - AENOR
    Learn More
    €93.60

  • UNE-EN ISO 6789-2:2019

    Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017)
    2/13/2019 - PDF - Spanish - AENOR
    Learn More
    €78.00

  • SAE AS 5259/1B:2019-02-11

    CRIMPING TOOL AND ACCESSORIES, REMOTE CRIMP HEAD, HYDRAULIC, WIRE SIZE 8 TO 0000 FOR INSULATED AND UN-INSULATED CRIMP BARRELS
    2/11/2019 - PDF - English - SAE
    Learn More
    €73.00

  • NBN EN ISO 28927-4:2010/A1:2019

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010/Amd 1:2017)
    1/30/2019 - PDF - German - NBN
    Learn More
    €30.00

  • NBN EN ISO 28927-4:2010/A1:2019

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010/Amd 1:2017)
    1/30/2019 - PDF - English - NBN
    Learn More
    €30.00

  • NBN EN ISO 28927-4:2010/A1:2019

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010/Amd 1:2017)
    1/30/2019 - PDF - French - NBN
    Learn More
    €30.00

  • SAE AS 22520/6B:2019-01-16

    CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; IN-SERVICE INSPECTION GAGES FOR TYPE II AS22520/5, /10, AND MIL-T-22520/32 (CANCEL) CRIMP TOOLS
    1/16/2019 - PDF - English - SAE
    Learn More
    €73.00

  • €25.03

  • NBN EN ISO 11148-13:2018

    Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)
    12/19/2018 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN ISO 11148-13:2018

    Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)
    12/19/2018 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN ISO 11148-13:2018

    Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)
    12/19/2018 - PDF - French - NBN
    Learn More
    €77.00

  • BS EN ISO 11148-13:2018


    12/7/2018 - PDF - English - BSI
    Learn More
    €282.90

  • NF EN ISO 28927-4/A1, E90-321-4/A1 (12/2018)

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4 : straight grinders - Amendment 1 : cupped wire brushes - Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 4: Meuleuses droites - Amendement 1
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €22.83

  • €25.03

  • DIN ISO 1085:2018-12

    Assembly tools for screws and nuts - Double-ended wrenches - Size pairing (ISO 1085:2016)
    12/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • PD ISO/TR 20571:2018

    Dynaload. Design and construction. Use and maintenance
    11/5/2018 - PDF - English - BSI
    Learn More
    €236.90

  • DIN EN ISO 28927-8/A2:2018-11

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 2 (ISO 28927-8:2009/DAM 2:2018); German and English version EN ISO 28927-8:2009/prA2:2018
    11/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • NF EN ISO 11148-13, E65-100-13 (11/2018)

    Hand-held non-electric power tools - Safety requirements - Part 13 : fastener driving tools - Machines portatives a moteur non électrique - Prescriptions de sécurité - Partie 13 : machines à enfoncer les fixations
    11/1/2018 - Paper - French - AFNOR
    Learn More
    €104.89

  • €43.95

  • DIN EN 62841-3-9 VDE 0740-3-9:2018-11

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014, modified + COR1:2015 + COR2:2016); German version EN 62841-3-9:2015 + AC:2016 + A11:2017
    11/1/2018 - Paper - German - VDE
    Learn More
    €98.49

  • ISO/TR 20571:2018

    Dynaload -- Design and construction -- Use and maintenance
    10/1/2018 - Paper - English - ISO
    Learn More
    €144.00

  • ISO/TR 20571:2018

    Dynaload -- Design and construction -- Use and maintenance
    10/1/2018 - Paper - French - ISO
    Learn More
    €144.00

  • PR NF EN 62841-2-3, C75-841-2-3PR (10/2018)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €104.91

  • 18/30360194 DC


    9/10/2018 - PDF - English - BSI
    Learn More
    €22.40

  • DIN EN 62841-3-6 VDE 0740-3-6:2018-09

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified + Cor.:2015); German version EN 62841-3-6:2014 + AC:2015 + A11:2017
    9/1/2018 - Paper - German - VDE
    Learn More
    €65.60

  • PR NF EN 62841-2-1/AB, C75-841-2-1/ABPR (09/2018)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1 : particular requirements for hand-held drills and impact drills
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €25.03

  • PR NF EN 55014-1/A1/F2, C91-014-1/A1/F2PR (09/2018)

    Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €33.88

  • PR NF EN 55014-1/A1/F3, C91-014-1/A1/F3PR (09/2018)

    Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €54.48

  • UNE-EN 50059:2018

    Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials (Endorsed by Asociación Española de Normalización in September of 2018.)
    9/1/2018 - PDF - English - AENOR
    Learn More
    €72.00

  • NF ISO 3315, E74-365 (09/2018)

    Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches - Dimensions and tests - Outils de manoeuvre pour vis et écrous - Pièces de commande pour douilles à main à carré conducteur - Dimensions et essais
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 3316, E74-366 (09/2018)

    Assembly tools for screws and nuts - Attachments for hand-operated square drive socket wrenches - Dimensions and tests - Outils de manoeuvre pour vis et écrous - Adaptateurs pour douilles à main à carré conducteur - Dimensions et essais
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • DIN EN 62841-2-1 VDE 0740-2-1:2018-08

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017, modified); German version EN 62841-2-1:2018
    8/1/2018 - Paper - German - VDE
    Learn More
    €98.49

  • DIN EN 62841-3-1 VDE 0740-3-1:2018-08

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified + COR1:2015); German version EN 62841-3-1:2014 + AC:2015 + A11:2017
    8/1/2018 - Paper - German - VDE
    Learn More
    €121.28

  • DIN EN 62841-3-14 VDE 0740-3-14:2018-08

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners (IEC 62841-3-14:2017, modified); German version EN 62841-3-14:2017
    8/1/2018 - Paper - German - VDE
    Learn More
    €84.90

  • DIN EN 62841-2-17 VDE 0740-2-17:2018-08

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers (IEC 62841-2-17:2017, modified); German version EN 62841-2-17:2017
    8/1/2018 - Paper - German - VDE
    Learn More
    €77.84

  • DIN EN 62841-3-4 VDE 0740-3-4:2018-08

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016, modified + COR1:2016); German version EN 62841-3-4:2016 + AC:2017 + A11:2017
    8/1/2018 - Paper - German - VDE
    Learn More
    €77.84

  • DIN EN 62841-3-10 VDE 0740-3-10:2018-08

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015, modified + COR1:2016); German version EN 62841-3-10:2015 + AC:2016 + A11:2017
    8/1/2018 - Paper - German - VDE
    Learn More
    €87.98

  • BS EN 62841-3-4:2016+A11:2017


    8/1/2018 - PDF - English - BSI
    Learn More
    €202.40

  • NF EN IEC 60900, C18-400 (08/2018)


    8/1/2018 - Paper - French - AFNOR
    Learn More
    €135.47

  • DIN EN 15895:2018-08

    Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools; German version EN 15895:2011+A1:2018
    8/1/2018 - PDF - German - DIN
    Learn More
    €130.80

  • DIN EN 15895:2018-08

    Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools; German version EN 15895:2011+A1:2018
    8/1/2018 - PDF - English - DIN
    Learn More
    €163.50

  • UNE-EN ISO 28927-1:2010/A1:2018

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders - Amendment 1: Cupped wire brushes (ISO 28927-1:2009/Amd 1:2017)
    7/25/2018 - PDF - English - AENOR
    Learn More
    €56.40

  • UNE-EN ISO 28927-1:2010/A1:2018

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders - Amendment 1: Cupped wire brushes (ISO 28927-1:2009/Amd 1:2017)
    7/25/2018 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE-EN ISO 28927-2:2010/A1:2018

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017)
    7/25/2018 - PDF - English - AENOR
    Learn More
    €68.40

  • UNE-EN ISO 28927-2:2010/A1:2018

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017)
    7/25/2018 - PDF - Spanish - AENOR
    Learn More
    €57.00

  • NF C75-841-3-4/A11, NF EN 62841-3-4/A11 (07/2018)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4 : particular requirements for transportable bench grinders
    7/20/2018 - PDF - English - UTE
    Learn More
    €48.40

  • NF EN 62841-3-4/A11, C75-841-3-4/A11 (07/2018)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4 : particular requirements for transportable bench grinders - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-4 : Exigences particulières pour les tourets à meuler transportables
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €48.40

  • NF EN 50059, C23-559 (07/2018)

    Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials - Equipement manuel de projection électrostatique - Exigences de sécurité - Equipement manuel de projection de revêtement ininflammable
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €102.58

  • NF EN 62841-3-14, C75-841-3-14 (07/2018)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14 : particular requirements for transportable drain cleaners - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-14: Exigences particulières pour les furets portables
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €102.58

  • NF ISO 6787, E74-324 (07/2018)

    Assembly tools for screws and nuts - Adjustable wrenches - Outils de manoeuvre pour vis et écrous - Clés à molette
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • UNE-EN 15895:2011+A1:2018

    Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools (Endorsed by Asociación Española de Normalización in July of 2018.)
    7/1/2018 - PDF - English - AENOR
    Learn More
    €88.00

  • NF C75-745-2-22/A11, NF EN 60745-2-22/A11 (06/2018)

    Hand-held motor-operated electric tools - Safety - Part 2-22 : particular requirements for cut-off machines
    6/30/2018 - PDF - English - UTE
    Learn More
    €77.83

  • BS EN 62841-3-10:2015+A11:2017


    6/29/2018 - PDF - English - BSI
    Learn More
    €236.90

  • NBN EN 15895:2011+A1:2018

    Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools
    6/20/2018 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 15895:2011+A1:2018

    Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools
    6/20/2018 - PDF - French - NBN
    Learn More
    €77.00

  • BS EN 62841-3-1:2014+A11:2017


    6/18/2018 - PDF - English - BSI
    Learn More
    €282.90

  • BS EN 62841-3-14:2017

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for transportable drain cleaners
    6/15/2018 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN 15895:2011+A1:2018


    6/12/2018 - PDF - English - BSI
    Learn More
    €282.90

  • NF EN 60745-2-22/A11, C75-745-2-22/A11 (06/2018)

    Hand-held motor-operated electric tools - Safety - Part 2-22 : particular requirements for cut-off machines - Outils électroportatifs à moteur
    6/1/2018 - Paper - French - AFNOR
    Learn More
    €77.83

  • NF ISO 10103, E74-311 (06/2018)

    Assembly tools for screws and nuts - Doubled-headed box wrenches, flat and offset - Outside dimensions and test torques - Outils de manoeuvre pour vis et écrous - Clés polygonales doubles, droites et inclinées - Dimensions extérieures et couples d'essai
    6/1/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • BS ISO 3316:2018

    Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests
    5/25/2018 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 3315:2018

    Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests
    5/25/2018 - PDF - English - BSI
    Learn More
    €121.90

  • BS EN 62841-3-9:2015+A11:2017


    5/18/2018 - PDF - English - BSI
    Learn More
    €266.80

  • NF C75-841-2-14, NF EN 62841-2-14 (05/2018)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14 : particular requirements for hand-held planers
    5/11/2018 - PDF - English - UTE
    Learn More
    €91.08

  • NF EN 62841-2-14, C75-841-2-14 (05/2018)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14 : particular requirements for hand-held planers - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-14 : exigences particulières pour les raboteuses portatives
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €91.08

  • DIN EN 62841-3-7 VDE 0740-3-7:2018-05

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws (IEC 116/359/CDV:2018); German and English version prEN 62841-3-7:2018
    5/1/2018 - Paper - German - VDE
    Learn More
    €29.12

  • NF ISO 10102, E74-310 (05/2018)

    Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Outside dimensions - Outils de manœuvre pour vis et écrous - Clés à fourche doubles - Dimensions extérieures
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 10104, E74-313 (05/2018)

    Assembly tools for screws and nuts - Double-headed box wrenches, deep offset and modified offset - Outside dimensions - Outils de manoeuvre pour vis et écrous - Clés polygonales doubles contre-coudées et contre-coudées profondes - Dimensions extérieures
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 1703, E74-380 (05/2018)

    Assembly tools for screws and nuts - Nomenclature - Outils de manoeuvre pour vis et écrous - Nomenclature
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €95.37

  • ISO 3316:2018

    Assembly tools for screws and nuts -- Attachments for hand-operated square drive socket wrenches -- Dimensions and tests
    5/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 3316:2018

    Assembly tools for screws and nuts -- Attachments for hand-operated square drive socket wrenches -- Dimensions and tests
    5/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 3315:2018

    Assembly tools for screws and nuts -- Driving parts for hand-operated square drive socket wrenches -- Dimensions and tests
    5/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 3315:2018

    Assembly tools for screws and nuts -- Driving parts for hand-operated square drive socket wrenches -- Dimensions and tests
    5/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • NF EN 15895+A1, E27-819 (05/2018)

    Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €104.89

  • NF EN 15895/IN1, E27-819/IN1 (05/2018)

    Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €22.83

  • BS ISO 6787:2018

    Assembly tools for screws and nuts. Adjustable wrenches
    4/13/2018 - PDF - English - BSI
    Learn More
    €121.90

  • PR NF EN 62847-3-7, C75-841-3-7PR (04/2018)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-7: Exigences particulières pour les scies murales portables
    4/1/2018 - Paper - French - AFNOR
    Learn More
    €63.76

  • BS EN 62841-2-11:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held reciprocating saws
    3/29/2018 - PDF - English - BSI
    Learn More
    €236.90

  • BS ISO 10103:2018

    Assembly tools for screws and nuts. Doubled-headed box wrenches, flat and offset. Outside dimensions and test torques
    3/27/2018 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 10102:2018

    Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Outside dimensions
    3/14/2018 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 10104:2018

    Assembly tools for screws and nuts. Double-headed box wrenches, deep offset and modified offset. Outside dimensions
    3/14/2018 - PDF - English - BSI
    Learn More
    €121.90

  • BS EN 62841-3-6:2014+A11:2017


    3/8/2018 - PDF - English - BSI
    Learn More
    €202.40

  • BS EN 62841-2-1:2018

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held drills and impact drills
    3/5/2018 - PDF - English - BSI
    Learn More
    €236.90

  • BS ISO 1703:2018

    Assembly tools for screws and nuts. Nomenclature
    3/1/2018 - PDF - English - BSI
    Learn More
    €282.90

  • UNE-EN 62841-2-1:2018

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills (Endorsed by Asociación Española de Normalización in March of 2018.)
    3/1/2018 - PDF - English - AENOR
    Learn More
    €75.00

  • ISO 6787:2018

    Assembly tools for screws and nuts -- Adjustable wrenches
    3/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 6787:2018

    Assembly tools for screws and nuts -- Adjustable wrenches
    3/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 10104:2018

    Assembly tools for screws and nuts -- Double-headed box wrenches, deep offset and modified offset -- Outside dimensions
    3/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10104:2018

    Assembly tools for screws and nuts -- Double-headed box wrenches, deep offset and modified offset -- Outside dimensions
    3/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 10103:2018

    Assembly tools for screws and nuts -- Doubled-headed box wrenches, flat and offset -- Outside dimensions and test torques
    3/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10103:2018

    Assembly tools for screws and nuts -- Doubled-headed box wrenches, flat and offset -- Outside dimensions and test torques
    3/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • BS EN 62841-2-17:2017

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held routers
    2/26/2018 - PDF - English - BSI
    Learn More
    €202.40

  • NF ISO 5393, E51-361 (02/2018)

    Rotary tools for threaded fasteners - Performance test method - Outils rotatifs pour éléments de fixation filetés
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €104.89

  • DIN EN 62841-2-21/AA VDE 0740-2-21/AA:2018-02

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners; German version FprEN 62841-2-21:2017/FprAA:2017
    2/1/2018 - Paper - German - VDE
    Learn More
    €16.21

  • PR NF EN 62841-2-21/AA, C75-841-2-21/AAPR (02/2018)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-21 : Exigences particulières pour les furets portatifs
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €33.88

  • ISO 10102:2018

    Assembly tools for screws and nuts -- Double-headed open-ended engineers' wrenches -- Outside dimensions
    2/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10102:2018

    Assembly tools for screws and nuts -- Double-headed open-ended engineers' wrenches -- Outside dimensions
    2/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • NF C75-841-2-1, NF EN 62841-2-1 (01/2018)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1 : particular requirements for hand-held drills and impact drills
    1/19/2018 - PDF - English - UTE
    Learn More
    €112.42

  • IEC 62841-2-11 Edition 1.1 (2018-01)

    IEC 62841-2-11:2015+AMD1:2018 consolidated version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
    1/19/2018 - PDF - English, French - CEI
    Learn More
    €203.00

  • IEC 62841-2-11 AMD 1 (2018-01)

    IEC 62841-2-11:2015/AMD1:2018 Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
    1/19/2018 - PDF - English - CEI
    Learn More
    €10.00

  • NF EN 62841-2-1, C75-841-2-1 (01/2018)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1 : particular requirements for hand-held drills and impact drills - Outils Électroportatifs à Moteur, Outils Portables et Machines pour Jardins et Pelouses - Sécurité - Partie 2-1: Exigences particulières pour les perceuses portatives et les perceuses à percussion
    1/1/2018 - Paper - French - AFNOR
    Learn More
    €112.42

  • DIN EN 62841-2-10 VDE 0740-2-10:2018-01

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers (IEC 62841-2-10:2017, modified); German version EN 62841-2-10:2017
    1/1/2018 - Paper - German - VDE
    Learn More
    €77.84

  • DIN EN 62841-3-13 VDE 0740-3-13:2018-01

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills (IEC 62841-3-13:2017, modified); German version EN 62841-3-13:2017
    1/1/2018 - Paper - German - VDE
    Learn More
    €69.60

  • UNE-EN 62841-3-4:2016/A11:2017

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (Endorsed by Asociación Española de Normalización in January of 2018.)
    1/1/2018 - PDF - English - AENOR
    Learn More
    €16.00

  • UNE-EN 62841-3-14:2017

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners (Endorsed by Asociación Española de Normalización in January of 2018.)
    1/1/2018 - PDF - English - AENOR
    Learn More
    €35.00

  • UNE-EN 62841-3-9:2015/A11:2017

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (Endorsed by Asociación Española de Normalización in January of 2018.)
    1/1/2018 - PDF - English - AENOR
    Learn More
    €15.00

  • UNE-EN 62841-3-6:2014/A11:2017

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (Endorsed by Asociación Española de Normalización in January of 2018.)
    1/1/2018 - PDF - English - AENOR
    Learn More
    €15.00

  • UNE-EN 62841-2-17:2017

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-17: Particular requirements for hand-held routers (Endorsed by Asociación Española de Normalización in January of 2018.)
    1/1/2018 - PDF - English - AENOR
    Learn More
    €35.00

  • UNE-EN 62841-3-1:2014/A11:2017

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) (Endorsed by Asociación Española de Normalización in January of 2018.)
    1/1/2018 - PDF - English - AENOR
    Learn More
    €15.00

  • BS ISO 5393:2017

    Rotary tools for threaded fasteners. Performance test method
    12/22/2017 - PDF - English - BSI
    Learn More
    €282.90

  • SAE AS 5259/3B:2017-12-18

    CRIMPING TOOL AND ACCESSORIES, HAND OPERATED, DIE TYPE, WIRE SIZES 8 TO 0000 UN-INSULATED AND INSULATED CRIMP BARRELS
    12/18/2017 - PDF - English - SAE
    Learn More
    €73.00

  • BS EN ISO 28927-2:2009+A1:2017


    12/15/2017 - PDF - English - BSI
    Learn More
    €282.90

  • NF C75-841-2-17, NF EN 62841-2-17 (12/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17 : particular requirements for hand-held routers
    12/15/2017 - PDF - English - UTE
    Learn More
    €91.08

  • IEC 62841-4-2 (2017-12)

    IEC 62841-4-2:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers
    12/14/2017 - PDF - English, French - CEI
    Learn More
    €305.00

  • NF C75-841-3-1/A11, NF EN 62841-3-1/A11 (12/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1 : particular requirements for transportable table saws
    12/8/2017 - PDF - English - UTE
    Learn More
    €35.75

  • NF C75-841-3-6/A11, NF EN 62841-3-6/A11 (12/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6 : particular requirements for transportable diamond drills with liquid system
    12/8/2017 - PDF - English - UTE
    Learn More
    €35.75

  • NF C75-841-3-9/A11, NF EN 62841-3-9/A11 (12/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9 : particular requirements for transportable mitre saws
    12/8/2017 - PDF - English - UTE
    Learn More
    €35.75

  • BS EN ISO 28927-1:2009+A1:2017


    12/6/2017 - PDF - English - BSI
    Learn More
    €236.90

  • NF EN 62841-2-17, C75-841-2-17 (12/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17 : particular requirements for hand-held routers - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-17 : Exigences particulières pour les défonceuses portatives
    12/1/2017 - Paper - French - AFNOR
    Learn More
    €91.08

  • DIN EN 62841-3-12-100 VDE 0740-3-12-100:2017-12

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines; German version FprEN 62841-3-12:2017/FprAA:2017
    12/1/2017 - Paper - German - VDE
    Learn More
    €16.21

  • NF EN 62841-3-1/A11, C75-841-3-1/A11 (12/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1 : particular requirements for transportable table saws - Outils électroportatifs à moteur, outils transportables et machines pour jardins et pelouses – Sécurité - Partie 3-1 : Exigences particulières pour les scies circulaires à table transportables
    12/1/2017 - Paper - French - AFNOR
    Learn More
    €35.75

  • NF EN 62841-3-6/A11, C75-841-3-6/A11 (12/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6 : particular requirements for transportable diamond drills with liquid system - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-6 : Exigences particulières pour les forets diamantés transportables avec système liquide
    12/1/2017 - Paper - French - AFNOR
    Learn More
    €35.75

  • NF EN 62841-3-9/A11, C75-841-3-9/A11 (12/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9 : particular requirements for transportable mitre saws - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-9: Exigences particulières pour les scies à onglets transportables
    12/1/2017 - Paper - French - AFNOR
    Learn More
    €35.75

  • NF EN 62841-3-10/A11, C75-841-3-10/A11 (12/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10 : particular requirements for transportable cut-off machines - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-10: Exigences particulières pour les scies à onglets transportables
    12/1/2017 - Paper - French - AFNOR
    Learn More
    €35.75

  • NF ISO 2284, E66-120 (12/2017)

    Hand taps for parallel and taper pipe threads - General dimensions and marking - Tarauds à main pour filetages cylindrique et conique de tuyauterie - Dimensions générales et marquage
    12/1/2017 - Paper - French - AFNOR
    Learn More
    €42.41

  • DIN EN ISO 19432-1:2017-12

    Building construction machinery and equipment - Portable, hand-held, internal-combustion-engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO/DIS 19432-1:2017); German and English version prEN ISO 19432-1:2017
    12/1/2017 - PDF - English, German - DIN
    Learn More
    €141.90

  • BS EN 62841-2-10:2017

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held mixers
    11/21/2017 - PDF - English - BSI
    Learn More
    €236.90

  • NF C75-841-3-9, NF EN 62841-3-9 (11/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9 : particular requirements for transportable mitre saws
    11/4/2017 - PDF - English - UTE
    Learn More
    €112.42

  • 17/30354011 DC


    11/3/2017 - PDF - English - BSI
    Learn More
    €23.00

  • DIN EN ISO 28927-2:2017-11

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009 + Amd 1:2017); German version EN ISO 28927-2:2009 + A1:2017
    11/1/2017 - PDF - German - DIN
    Learn More
    €130.80

  • DIN EN ISO 28927-2:2017-11

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009 + Amd 1:2017); German version EN ISO 28927-2:2009 + A1:2017
    11/1/2017 - PDF - English - DIN
    Learn More
    €163.50

  • ISO 5393:2017

    Rotary tools for threaded fasteners -- Performance test method
    11/1/2017 - Paper - English - ISO
    Learn More
    €165.00

  • ISO 5393:2017

    Rotary tools for threaded fasteners -- Performance test method
    11/1/2017 - Paper - French - ISO
    Learn More
    €165.00

  • ISO 11148-13:2017

    Hand-held non-electric power tools -- Safety requirements -- Part 13: Fastener driving tools
    11/1/2017 - Paper - English - ISO
    Learn More
    €165.00

  • ISO 11148-13:2017

    Hand-held non-electric power tools -- Safety requirements -- Part 13: Fastener driving tools
    11/1/2017 - Paper - French - ISO
    Learn More
    €165.00

  • NF EN 62841-3-9, C75-841-3-9 (11/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9 : particular requirements for transportable mitre saws - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses
    11/1/2017 - Paper - French - AFNOR
    Learn More
    €112.42

  • DIN ISO 3317:2017-11

    Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches (ISO 3317:2015)
    11/1/2017 - PDF - German - DIN
    Learn More
    €47.60

  • DIN ISO 3317:2017-11

    Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches (ISO 3317:2015)
    11/1/2017 - PDF - English - DIN
    Learn More
    €59.60

  • IEC 62841-3-14 (2017-10)

    IEC 62841-3-14:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners
    10/11/2017 - PDF - English, French - CEI
    Learn More
    €142.00

  • IEC 62841-4-1 (2017-10)

    IEC 62841-4-1:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-1: Particular requirements for chain saws
    10/11/2017 - PDF - English, French - CEI
    Learn More
    €274.00

  • NF C75-200-2-5/A11, NF EN 61029-2-5/A11 (10/2017)

    Safety of transportable motor-operated electric tools - Part 2-5 : particular requirements for band saws
    10/6/2017 - PDF - English - UTE
    Learn More
    €48.40

  • NF C75-200-2-9/A11, NF EN 61029-2-9/A11 (10/2017)

    Safety of transportable motor-operated electric tools - Part 2-9 : particular requirements for mitre saws
    10/6/2017 - PDF - English - UTE
    Learn More
    €35.75

  • NF EN 61029-2-9/A11, C75-200-2-9/A11 (10/2017)

    Safety of transportable motor-operated electric tools - Part 2-9 : particular requirements for mitre saws - Sécurité des machines-outils électriques semi-fixes - Partie 2-9 : Règles particulières pour les scies à onglet
    10/1/2017 - Paper - French - AFNOR
    Learn More
    €35.75

  • NF EN 61029-2-5/A11, C75-200-2-5/A11 (10/2017)

    Safety of transportable motor-operated electric tools - Part 2-5 : particular requirements for band saws - Sécurité des machines-outils électriques semi-fixes - Partie 2-5 : règles particulières pour les scies à ruban
    10/1/2017 - Paper - French - AFNOR
    Learn More
    €48.40

  • ASTM F3151-17

    Standard Specification for Driven Steel Post Drive Anchor System
    10/1/2017 - PDF - English - ASTM
    Learn More
    €38.00

  • NBN EN ISO 28927-2:2009/A1:2017

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017)
    9/22/2017 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN ISO 28927-2:2009/A1:2017

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017)
    9/22/2017 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN ISO 28927-2:2009/A1:2017

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017)
    9/22/2017 - PDF - French - NBN
    Learn More
    €56.00

  • PR NF EN 62841-4-2, C75-841-4-2PR (09/2017)

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-2: Particular requirements for hedge trimmers - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 4-2 : Exigences particulières pour les taille-haies
    9/1/2017 - Paper - French - AFNOR
    Learn More
    €112.96

  • NF ISO 2725-1, E74-363-1 (09/2017)

    Assembly tools for screws and nuts - Square drive sockets - Part 1 : hand-operated sockets - Outils de manoeuvre pour vis et écrous - Douilles à carré conducteur femelle - Partie 1: Douilles à main
    9/1/2017 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF ISO 2725-3, E74-363-3 (09/2017)

    Assembly tools for screws and nuts - Square drive sockets - Part 3 : machine-operated sockets (non-impact) - Outils de manoeuvre pour vis et écrous - Douilles à carré conducteur femelle - Partie 3: Douilles à machine (non-impact)
    9/1/2017 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 2725-2, E74-363-2 (09/2017)

    Assembly tools for screws and nuts - Square drive sockets - Part 2 : machine-operated sockets (impact) - Outils de manoeuvre pour vis et écrous - Douilles à carré conducteur femelle - Partie 2: Douilles à machine (impact)
    9/1/2017 - Paper - French - AFNOR
    Learn More
    €53.41

  • IEC 62841-2-17 (2017-08)

    IEC 62841-2-17:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers
    8/23/2017 - PDF - English, French - CEI
    Learn More
    €142.00

  • IEC 62841-3-12 (2017-08)

    IEC 62841-3-12:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines
    8/23/2017 - PDF - English, French - CEI
    Learn More
    €71.00

  • NF C75-841-2-4, NF EN 62841-2-4 (08/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4 : particular requirements for hand-held sanders and polishers other than disc type
    8/19/2017 - PDF - English - UTE
    Learn More
    €91.08

  • BS EN 62841-3-13:2017

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for transportable drills
    8/11/2017 - PDF - English - BSI
    Learn More
    €202.40

  • NF EN 62841-2-4, C75-841-2-4 (08/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4 : particular requirements for hand-held sanders and polishers other than disc type - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-4 : exigences particulières pour les ponceuses et lustreuses portatives, autres que du type à disque
    8/1/2017 - Paper - French - AFNOR
    Learn More
    €91.08

  • UNE-EN 62841-3-13:2017

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills (Endorsed by Asociación Española de Normalización in August of 2017.)
    8/1/2017 - PDF - English - AENOR
    Learn More
    €69.00

  • UNE-EN 62841-2-10:2017

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-10: Particular requirements for hand-held mixers (Endorsed by Asociación Española de Normalización in August of 2017.)
    8/1/2017 - PDF - English - AENOR
    Learn More
    €72.00

  • PR NF EN 62841-3-12, C75-841-3-12PR (08/2017)

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-12: Particular requirements for transportable threading machines - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-12 : Exigences particulières pour les machines à fileter portables
    8/1/2017 - Paper - French - AFNOR
    Learn More
    €54.48

  • PR NF EN 62841-4-1, C75-841-4-1PR (08/2017)

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 4-1 : Exigences particulières pour les scies à chaîne
    8/1/2017 - Paper - French - AFNOR
    Learn More
    €94.83

  • NF EN ISO 28927-2/A1, E90-321-2/A1 (08/2017)

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2 : wrenches, nutrunners and screwdrivers - Amendment 1: Changes in Annex C - Brake devices - Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 2 : Partie 2 : Clés, boulonneuses et visseuses - Amendement 1 : Modification de l'Annexe C - dispositifs de freinage
    8/1/2017 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF C75-200-2-11, NF EN 61029-2-11 (07/2017)

    Safety of transportable motor-operated electric tools - Part 2-11 : particular requirements for combined mitre and bench saws
    7/21/2017 - PDF - English - UTE
    Learn More
    €124.52

  • NF C75-841-2-5, NF EN 62841-2-5 (07/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: particular requirements for hand-held circular saws
    7/14/2017 - PDF - English - UTE
    Learn More
    €124.52

  • ISO 28927-4:2010/Amd 1:2017

    Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 4: Straight grinders
    7/1/2017 - Paper - English - ISO
    Learn More
    €17.00

  • ISO 28927-4:2010/Amd 1:2017

    Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 4: Straight grinders
    7/1/2017 - Paper - French - ISO
    Learn More
    €17.00

  • ISO 28927-2:2009/Amd 1:2017

    Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 2: Wrenches, nutrunners and screwdrivers
    7/1/2017 - Paper - English - ISO
    Learn More
    €17.00

  • ISO 28927-2:2009/Amd 1:2017

    Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 2: Wrenches, nutrunners and screwdrivers
    7/1/2017 - Paper - French - ISO
    Learn More
    €17.00

  • NF EN 61029-2-11, C75-200-2-11 (07/2017)

    Safety of transportable motor-operated electric tools - Part 2-11 : particular requirements for combined mitre and bench saws
    7/1/2017 - Paper - French - AFNOR
    Learn More
    €124.52

  • NF EN 62841-3-1, C75-841-3-1 (07/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: particular requirements for transportable table saws - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses
    7/1/2017 - Paper - French - AFNOR
    Learn More
    €135.47

  • NF EN 62841-3-6, C75-841-3-6 (07/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6 : particular requirements for transportable diamond drills with liquid system - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses
    7/1/2017 - Paper - French - AFNOR
    Learn More
    €91.08

  • NF EN 62841-2-5, C75-841-2-5 (07/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: particular requirements for hand-held circular saws - Outils électroportatifs à moteur, outils semi-fixes et machines pour jardins et pelouses
    7/1/2017 - Paper - French - AFNOR
    Learn More
    €124.52

  • NF ISO 4229, E74-301 (07/2017)

    Assembly tools for screws and nuts - Single-head engineer's wrenches for lower torque applications - Maximum outside dimensions of heads and test torques - Outils de manoeuvre pour vis et écrous - Clés à fourche simples pour applications aux couples plus faibles - Dimensions extérieures maximales d'encombrement des têtes et couples d'essai
    7/1/2017 - Paper - French - AFNOR
    Learn More
    €42.41

  • DIN EN ISO 6789-1:2017-07

    Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017); German version EN ISO 6789-1:2017
    7/1/2017 - PDF - German - DIN
    Learn More
    €103.00

  • DIN EN ISO 6789-2:2017-07

    Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017); German version EN ISO 6789-2:2017
    7/1/2017 - PDF - German - DIN
    Learn More
    €130.80

  • DIN EN ISO 6789-1:2017-07

    Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017); German version EN ISO 6789-1:2017
    7/1/2017 - PDF - English - DIN
    Learn More
    €128.80

  • DIN EN ISO 6789-2:2017-07

    Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017); German version EN ISO 6789-2:2017
    7/1/2017 - PDF - English - DIN
    Learn More
    €163.50

  • BS EN 55014-1:2017

    Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Emission
    6/30/2017 - PDF - English - BSI
    Learn More
    €324.30

  • NF C91-014-1, NF EN 55014-1 (06/2017)

    Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : emission
    6/30/2017 - PDF - English - UTE
    Learn More
    €173.47

  • BS ISO 2725-2:2017

    Assembly tools for screws and nuts. Square drive sockets. Machine-operated sockets ('impact')
    6/28/2017 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 2725-1:2017

    Assembly tools for screws and nuts. Square drive sockets. Hand-operated sockets
    6/28/2017 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 2725-3:2017

    Assembly tools for screws and nuts. Square drive sockets. Machine-operated sockets ('non-impact')
    6/26/2017 - PDF - English - BSI
    Learn More
    €144.90

Items 1 to 200 of 1768 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9