Closure for annual leave, no order will be honored August 1 to August 19, 2019 included.

Call +33 (1) 40 02 03 05
Type de carte de crédit

25.120 : Chipless working equipment

Items 1 to 200 of 819 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • NF E63-058, E63-058 (05/2019)

    Tools for pressing - Gliding guide pillars - End-locking pillars with flange - Outillage de presse - Colonnes de guidage pour guidage lisse - Colonnes à retenue inférieure démontables
    5/1/2019 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E 63-113, E63-113 (03/2019)

    Press tools - Rectangular retainers and percussion plates for flanged punches - Top fixing - Outillage de presses - Porte-poinçons et plaques de choc rectangulaires pour poinçons à collerette - Fixation par dessus
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF E63-114, E63-114 (03/2019)

    Tools for pressing - Square retainers and backing plates for flanged punches - Top fixing - Outillage de presses - Porte-poinçons et plaques de choc carrés pour poinçons à collerette - Fixation par dessus
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E63-132, E63-132 (03/2019)

    tools for pressing - Ring bolt - Dimensions
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €22.83

  • NF E63-142, E63-142 (03/2019)

    Tools for pressing - Roller cams - General specifications
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF E63-137, E63-137 (03/2019)

    Press-tools - Precompressed assemblies for medium rate - General specifications
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF ISO 20929, E63-077 (03/2019)

    Tools for pressing - Heel guidings plates in large stamping and forming dies - Outillage de presse et de moulage - Plaques de frottement latérales pour grands outils d'emboutissage et de formage
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E63-124, E63-124 (03/2019)

    Tools for pressing - Ball guides - Ball cage
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €30.64

  • PR NF ISO 12165, E63-521PR (03/2019)


    3/1/2019 - Paper - French - AFNOR
    Learn More
    €112.59

  • NF ISO 20928, E63-078 (01/2019)

    Tools for pressing - Spring plungers with helicoidal compression steel spring or gas spring - Outillage de presse - Poussoirs à ressort compressés par ressort hélicoïdal en acier ou par ressort à gaz
    1/1/2019 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 11901-2, E63-131-2 (12/2018)

    Tools for pressing - Gas springs - Part 2 : specification accessories - Outillage de presse - Ressorts à gaz - Partie 2 : Spécifications des accessoires
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €66.72

  • UNE-EN ISO 16092-3:2018

    Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)
    11/21/2018 - PDF - English - AENOR
    Learn More
    €90.00

  • UNE-EN ISO 16092-3:2018

    Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)
    11/21/2018 - PDF - Spanish - AENOR
    Learn More
    €75.00

  • UNE-EN ISO 16092-1:2018

    Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)
    11/21/2018 - PDF - English - AENOR
    Learn More
    €99.60

  • UNE-EN ISO 16092-1:2018

    Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)
    11/21/2018 - PDF - Spanish - AENOR
    Learn More
    €83.00

  • PR NF EN 16486/A1, H96-201/A1PR (11/2018)

    Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements - Amendment 1
    11/1/2018 - Paper - French - AFNOR
    Learn More
    €54.95

  • BS ISO 11901-2:2018

    Tools for pressing. Gas springs. Specification of accessories
    10/25/2018 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 20929:2018

    Tools for pressing. Heel guidings in large stamping and forming dies
    10/25/2018 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 20928:2018

    Tools for pressing. Spring plungers with helicoidal compression steel spring or gas spring
    10/9/2018 - PDF - English - BSI
    Learn More
    €144.90

  • DIN ISO 10243:2018-10

    Tools for pressing - Compression springs with rectangular section - Housing dimensions and colour coding (ISO/DIS 10243:2018); Text in German and English
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €82.60

  • DIN ISO 11901-2:2018-10

    Tools for pressing - Gas springs - Part 2: Specification of accessories (ISO/FDIS 11901-2:2018); Text in German and English
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €75.40

  • DIN ISO 20929:2018-10

    Tools for pressing - Heel guidings in large stamping and forming dies (ISO/FDIS 20929:2018); Text in German and English
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN ISO 20928:2018-10

    Tools for pressing - Spring plungers with helicoidal compression steel spring or gas spring (ISO/FDIS 20928:2018); Text in German and English
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • PR NF EN ISO 16092-4, E63-026-4PR (10/2018)

    Machine tools safety - Presses - Part 4 : safety requirements for pneumatic presses
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €95.10

  • PR NF EN ISO 16092-2, E63-026-2PR (10/2018)

    Machine tools safety - Presses - Part 2 : safety requirement for mechanical presses
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €121.66

  • PR NF ISO 21223, E63-049PR (10/2018)

    Tools for pressing - Terminology
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €78.60

  • PR NF ISO 10243, E63-136PR (10/2018)

    Tools for pressing - Compression springs with rectangular section - Housing dimensions and colour coding
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €72.38

  • ISO 20928:2018

    Tools for pressing -- Spring plungers with helicoidal compression steel spring or gas spring
    10/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 20928:2018

    Tools for pressing -- Spring plungers with helicoidal compression steel spring or gas spring
    10/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 20929:2018

    Tools for pressing -- Heel guidings in large stamping and forming dies
    10/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 20929:2018

    Tools for pressing -- Heel guidings in large stamping and forming dies
    10/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 11901-2:2018

    Tools for pressing -- Gas springs -- Part 2: Specification of accessories
    10/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 11901-2:2018

    Tools for pressing -- Gas springs -- Part 2: Specification of accessories
    10/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • NBN EN ISO 16092-3:2018

    Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)
    3/23/2018 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN ISO 16092-3:2018

    Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)
    3/23/2018 - PDF - French - NBN
    Learn More
    €77.00

  • NBN EN ISO 16092-3:2018

    Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)
    3/23/2018 - PDF - German - NBN
    Learn More
    €77.00

  • BS EN ISO 16092-3:2018

    Machine tools safety. Presses. Safety requirements for hydraulic presses
    3/21/2018 - PDF - English - BSI
    Learn More
    €266.80

  • NF EN ISO 16092-1, E63-026-1 (02/2018)

    Machine tools safety - Presses - Part 1 : general safety requirements - Sécurité des machines-outils - Presses - Partie 1 : exigences générales de sécurité
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €104.89

  • NF EN ISO 16092-3, E63-026-3 (02/2018)

    Machine tools safety - Presses - Part 3 : safety requirements for hydraulic presses - Sécurité des machines-outils - Presses - Partie 3 : Exigences de sécurité pour les presses hydrauliques
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €95.37

  • UNE-EN 62841-3-14:2017

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners (Endorsed by Asociación Española de Normalización in January of 2018.)
    1/1/2018 - PDF - English - AENOR
    Learn More
    €35.00

  • DIN 1530-2:2017-11

    Tools for moulding - Part 2: Shouldered ejector pins
    11/1/2017 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 1530-3:2017-11

    Tools for moulding - Part 3: Ejector pins with conical head
    11/1/2017 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 1530-1:2017-11

    Tools for moulding - Part 1: Ejector pins with cylindrical head
    11/1/2017 - PDF - German - DIN
    Learn More
    €40.80

  • BS EN 62841-3-13:2017

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for transportable drills
    8/11/2017 - PDF - English - BSI
    Learn More
    €202.40

  • VDI 3363:2017-08

    Shoulder screws, shoulder bushes in stamping and forming dies
    8/1/2017 - PDF - English, German - VDI
    Learn More
    €112.06

  • UNE-EN 62841-3-13:2017

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills (Endorsed by Asociación Española de Normalización in August of 2017.)
    8/1/2017 - PDF - English - AENOR
    Learn More
    €69.00

  • JIS B 0111:2017

    Press machinery - Vocabulary
    7/20/2017 - PDF - Japanese - JSA
    Learn More
    €50.18

  • JIS B 6420:2017

    Press machinery - Graphical symbols for operations
    7/20/2017 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 6361-1:2017

    Test conditions for die sinking electro-discharge machines (die sinking EDM) - Testing of the accuracy - Part 1: Single-column machines
    7/20/2017 - PDF - Japanese - JSA
    Learn More
    €36.27

  • JIS B 6361-2:2017

    Test conditions for die sinking electro-discharge machines (die sinking EDM) - Testing of the accuracy - Part 2: Double-column machines (slide-head type)
    7/20/2017 - PDF - Japanese - JSA
    Learn More
    €36.27

  • VDI 3356:2017-03

    Guide pillars with lead-in chamfer in large stamping dies - Supplement to DIN 9833 und ISO 9182-3
    3/1/2017 - PDF - English, German - VDI
    Learn More
    €51.35

  • DIN 5118:2017-02

    Tools for pressing - Punches with trombone neck
    2/1/2017 - PDF - German - DIN
    Learn More
    €47.60

  • VDI 5580:2017-01

    Precision glass moulding of optical elements - Basic technology
    1/1/2017 - PDF - English, German - VDI
    Learn More
    €71.24

  • DIN ISO 16916:2017-01

    Tools for moulding - Tool specification sheet for injection moulds (ISO 16916:2016)
    1/1/2017 - PDF - German - DIN
    Learn More
    €54.80

  • DIN ISO 16916:2017-01

    Tools for moulding - Tool specification sheet for injection moulds (ISO 16916:2016)
    1/1/2017 - PDF - English - DIN
    Learn More
    €68.50

  • BS EN 62841-2-8:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held shears and nibblers
    11/30/2016 - PDF - English - BSI
    Learn More
    €144.90

  • JIS B 6032:2016

    Machine tools - Safety - Electro-discharge machines
    11/25/2016 - PDF - Japanese - JSA
    Learn More
    €52.91

  • VDI 3374:2016-09

    Punches with cylindrical head
    9/1/2016 - PDF - German - VDI
    Learn More
    €71.24

  • BS ISO 8017:2007

    Tools for moulding. Guide pillars, straight and shouldered, and locating guide pillars, shouldered
    8/31/2016 - PDF - English - BSI
    Learn More
    €144.90

  • VDI 3002:2016-06

    Pressure pins in large stamping and forming dies
    6/1/2016 - PDF - German - VDI
    Learn More
    €71.24

  • NF ISO 16916, E63-524 (05/2016)

    Tools for moulding - Tools specification sheet for injection moulds - Outillage de moulage - Formulaire de spécifications d'outils pour moules d'injection
    5/1/2016 - Paper - French - AFNOR
    Learn More
    €42.41

  • VDI 2019:2016-04

    Testing the adhesion of thermoplastic elastomers (TPE) on substrates
    4/1/2016 - PDF - English, German - VDI
    Learn More
    €81.50

  • BS ISO 16916:2016

    Tools for moulding. Tool specification sheet for injection moulds
    2/29/2016 - PDF - English - BSI
    Learn More
    €144.90

  • ISO 16916:2016

    Tools for moulding -- Tool specification sheet for injection moulds
    2/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 16916:2016

    Tools for moulding -- Tool specification sheet for injection moulds
    2/1/2016 - Paper - French - ISO
    Learn More
    €61.00

  • VDI 3003 Blatt 1:2015-11

    Nitrogen gas springs in large stamping and forming dies - Safety instructions for usage
    11/1/2015 - PDF - English, German - VDI
    Learn More
    €83.07

  • DIN EN ISO 16092-3:2015-09

    Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO/DIS 16092-3:2015); German and English version prEN ISO 16092-3:2015
    9/1/2015 - PDF - English, German - DIN
    Learn More
    €119.60

  • NF ISO 11090-1, E60-134-1 (09/2015)

    Test conditions for die sinking electro-discharge machines (die sinking EDM) - Testing of accuracy - Part 1 : single-column machines (cross-slide table type and fixed-table type) - Machines-outils
    9/1/2015 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF ISO 11090-2, E60-134-2 (09/2015)

    Test conditions for die sinking electro-discharge machines (die sinking EDM) - Testing of accuracy - Part 2 : double-column machines (slide-head type) - Conditions d'essai des machines d'électroérosion en plongée
    9/1/2015 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF ISO 14137, E60-140 (08/2015)

    Test conditions for wire electrical-discharge machines (wire EDM) - Testing of the accuracy - Machines-outils - Conditions d'essai des machines d'électroérosion à fil (fil EDM) - Terminologie et contrôle de la précision
    8/1/2015 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF H96-203, H96-203 (06/2015)

    Machines for compacting waste materials or recyclable fractions - Static compactors - Interface between the compaction unit and the container - Functional dimensions and particular specifications - Machines de compactage pour déchets ou matières recyclables - Compacteurs désaccoupables - Interface entre l'unité de compaction et le caisson - Dimensions fonctionnelles et spécifications particulières
    6/1/2015 - Paper - French - AFNOR
    Learn More
    €42.41

  • VDI 3120:2015-06

    Cast steel wall thicknesses in large stamping and forming dies - Design references for tools with more than 1000 mm side length
    6/1/2015 - PDF - English, German - VDI
    Learn More
    €51.35

  • VDI 3378:2015-04

    Lubrication of large stamping and forming dies
    4/1/2015 - PDF - English, German - VDI
    Learn More
    €51.35

  • BS ISO 14137:2015

    Test conditions for wire electrical-discharge machines (wire EDM). Testing of the accuracy
    3/31/2015 - PDF - English - BSI
    Learn More
    €202.40

  • UNE-EN 16500:2015

    Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
    3/4/2015 - PDF - Spanish - AENOR
    Learn More
    €65.00

  • BS ISO 11090-1:2014

    Test conditions for die sinking electro-discharge machines (die sinking EDM). Testing of the accuracy. Single-column machines (cross-slide table type and fixed-table type)
    12/31/2014 - PDF - English - BSI
    Learn More
    €236.90

  • BS ISO 11090-2:2014

    Test conditions for die sinking electro-discharge machines (die sinking EDM). Testing of the accuracy. Double-column machines (slide-head type)
    12/31/2014 - PDF - English - BSI
    Learn More
    €236.90

  • DIN 9868:2014-12

    Press tools - Press tool sets of steel
    12/1/2014 - PDF - German - DIN
    Learn More
    €54.80

  • VDI 3370:2014-12

    Mechanisation elements in stamping and forming dies
    12/1/2014 - PDF - English, German - VDI
    Learn More
    €83.07

  • DIN ISO 8405:2014-12

    Tools for moulding - Ejector sleeves with cylindrical head - Basic series for general purposes (ISO 8405:2013)
    12/1/2014 - PDF - German - DIN
    Learn More
    €33.60

  • DIN ISO 8405:2014-12

    Tools for moulding - Ejector sleeves with cylindrical head - Basic series for general purposes (ISO 8405:2013)
    12/1/2014 - PDF - English - DIN
    Learn More
    €42.00

  • ISO 11090-1:2014

    Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 1: Single-column machines (cross-slide table type and fixed-table type)
    12/1/2014 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 11090-1:2014

    Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 1: Single-column machines (cross-slide table type and fixed-table type)
    12/1/2014 - Paper - French - ISO
    Learn More
    €123.00

  • ISO 11090-2:2014

    Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 2: Double-column machines (slide-head type)
    12/1/2014 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 11090-2:2014

    Test conditions for die sinking electro-discharge machines (die sinking EDM) -- Testing of the accuracy -- Part 2: Double-column machines (slide-head type)
    12/1/2014 - Paper - French - ISO
    Learn More
    €123.00

  • DIN EN ISO 16092-1:2014-11

    Machine tools safety - Presses - Part 1: General safety requirements (ISO/DIS 16092-1:2014); German version prEN ISO 16092-1:2014
    11/1/2014 - PDF - German - DIN
    Learn More
    €130.80

  • DIN ISO 23481:2014-11

    Tools for pressing - Cam driver plates (ISO 23481:2013)
    11/1/2014 - PDF - German - DIN
    Learn More
    €40.80

  • DIN ISO 23481:2014-11

    Tools for pressing - Cam driver plates (ISO 23481:2013)
    11/1/2014 - PDF - English - DIN
    Learn More
    €51.00

  • DIN EN 16500:2014-10

    Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements; German version EN 16500:2014
    10/1/2014 - PDF - German - DIN
    Learn More
    €119.60

  • DIN EN 16500:2014-10

    Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements; German version EN 16500:2014
    10/1/2014 - PDF - English - DIN
    Learn More
    €149.40

  • NF EN 16500, H96-202 (10/2014)

    Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements - Machines à compactage pour déchets ou matières recyclables
    10/1/2014 - Paper - French - AFNOR
    Learn More
    €87.56

  • NBN EN 16500:2014

    Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
    9/26/2014 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 16500:2014

    Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
    9/26/2014 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 16500:2014

    Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
    9/26/2014 - PDF - French - NBN
    Learn More
    €77.00

  • NF EN 16486, H96-201 (09/2014)

    Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements - Machines de compactage pour déchets ou matières recyclables
    9/1/2014 - Paper - French - AFNOR
    Learn More
    €95.37

  • VDI 3387:2014-09

    Heel guidings in large stamping and forming dies
    9/1/2014 - PDF - English, German - VDI
    Learn More
    €51.35

  • BS EN 16500:2014

    Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements
    8/31/2014 - PDF - English - BSI
    Learn More
    €236.90

  • NF ISO 11901-3, E63-131-3 (06/2014)

    Tools for pressing - Gas springs - Part 3 : gas spring with increased spring force and compact build height - Outillage de presse
    6/1/2014 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF ISO 11901-4, E63-131-4 (06/2014)

    Tools for pressing - Gas Springs - Part 4 : gas springs with increased spring force and same build height - Outillage de presse
    6/1/2014 - Paper - French - AFNOR
    Learn More
    €53.41

  • UNE-EN ISO 28881:2014

    Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)
    4/16/2014 - PDF - English - AENOR
    Learn More
    €97.20

  • UNE-EN ISO 28881:2014

    Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)
    4/16/2014 - PDF - Spanish - AENOR
    Learn More
    €81.00

  • DIN ISO 23480:2014-03

    Tools for pressing - Sliding plates (ISO 23480:2013)
    3/1/2014 - PDF - German - DIN
    Learn More
    €47.60

  • DIN ISO 23480:2014-03

    Tools for pressing - Sliding plates (ISO 23480:2013)
    3/1/2014 - PDF - English - DIN
    Learn More
    €59.60

  • NF ISO 23481, E63-146 (03/2014)

    Tools for pressing - Cam driver plates - Outillage de presse
    3/1/2014 - Paper - French - AFNOR
    Learn More
    €30.64

  • ISO 11901-3:2014 (R2019)

    Tools for pressing -- Gas springs -- Part 3: Gas spring with increased spring force and compact built height
    3/1/2014 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 11901-3:2014 (R2019)

    Tools for pressing -- Gas springs -- Part 3: Gas spring with increased spring force and compact built height
    3/1/2014 - Paper - French - ISO
    Learn More
    €92.00

  • ISO 11901-4:2014 (R2019)

    Tools for pressing -- Gas springs -- Part 4: Gas springs with increased spring force and same built height
    3/1/2014 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 11901-4:2014 (R2019)

    Tools for pressing -- Gas springs -- Part 4: Gas springs with increased spring force and same built height
    3/1/2014 - Paper - French - ISO
    Learn More
    €61.00

  • BS ISO 11901-3:2014

    Tools for pressing. Gas springs. Gas spring with increased spring force and compact built height
    2/28/2014 - PDF - English - BSI
    Learn More
    €202.40

  • BS ISO 11901-4:2014

    Tools for pressing. Gas springs. Gas springs with increased spring force and same built height
    2/28/2014 - PDF - English - BSI
    Learn More
    €144.90

  • DIN EN 12622:2014-02

    Safety of machine tools - Hydraulic press brakes; German version EN 12622:2009+A1:2013
    2/1/2014 - PDF - German - DIN
    Learn More
    €158.30

  • DIN EN 12622:2014-02

    Safety of machine tools - Hydraulic press brakes; German version EN 12622:2009+A1:2013
    2/1/2014 - PDF - English - DIN
    Learn More
    €197.90

  • NF ISO 8404, E63-505 (02/2014)

    Tools for moulding - Angle pins - Outillage de moulage
    2/1/2014 - Paper - French - AFNOR
    Learn More
    €42.41

  • BS ISO 9448-8:2013

    Tools for pressing. Guide bushes. Form G, gliding bushes, stepped, type 1
    1/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9448-9:2013

    Tools for pressing. Guide bushes. Form B, ball cage bushes, plain, type 2
    1/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9448-10:2013

    Tools for pressing. Guide bushes. Form E, gliding bushes, flanged, type 2
    1/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9448-11:2013

    Tools for pressing. Guide bushes. Form F, ball cage bushes, flanged, type 2
    1/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9448-1:2013

    Tools for pressing. Guide bushes. Forms
    1/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9448-2:2013

    Tools for pressing. Guide bushes. Form A, gliding bushes, plain, type 1
    1/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9448-3:2013

    Tools for pressing. Guide bushes. Form B, ball cage bushes, plain, type 1
    1/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9448-4:2013

    Tools for pressing. Guide bushes. Form C, gliding bushes, headed, type 1
    1/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9448-5:2013

    Tools for pressing. Guide bushes. Form D, ball cage bushes, headed, type 1
    1/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9448-6:2013

    Tools for pressing. Guide bushes. Form E, gliding bushes, flanged, type 1
    1/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9448-7:2013

    Tools for pressing. Guide bushes. Form F, ball cage bushes, flanged, type 1
    1/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • VDI 3357:2014-01

    Sliding elements in large stamping dies
    1/1/2014 - PDF - English, German - VDI
    Learn More
    €103.22

  • ANSI B 11.16:2014

    Safety Requirements for Powder / Metal Compacting Presses
    1/1/2014 - PDF sécurisé - English - ANSI
    Learn More
    €90.00

  • DIN EN ISO 28881:2014-01

    Machine tools - Safety - Electro-discharge machines (ISO 28881:2013 + Cor. 1:2013); German version EN ISO 28881:2013 + AC:2013
    1/1/2014 - PDF - German - DIN
    Learn More
    €153.40

  • DIN EN ISO 28881:2014-01

    Machine tools - Safety - Electro-discharge machines (ISO 28881:2013 + Cor. 1:2013); German version EN ISO 28881:2013 + AC:2013
    1/1/2014 - PDF - English - DIN
    Learn More
    €191.70

  • BS ISO 9182-1:2013

    Tools for pressing. Guide pillars. Types
    12/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9182-2:2013

    Tools for pressing. Guide pillars. Type A, straight pillars
    12/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9182-3:2013

    Tools for pressing. Guide pillars. Type B, end-locking pillars
    12/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9182-4:2013

    Tools for pressing. Guide pillars. Type C, pillars with taper lead and bush
    12/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9182-5:2013

    Tools for pressing. Guide pillars. Type D, end-locking pillars with flange
    12/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 23481:2013

    Tools for pressing. Cam driver plates
    12/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • UNE-EN 12622:2011+A1:2013

    Safety of machine tools - Hydraulic press brakes
    12/23/2013 - PDF - English - AENOR
    Learn More
    €105.60

  • UNE-EN 12622:2011+A1:2013

    Safety of machine tools - Hydraulic press brakes
    12/23/2013 - PDF - Spanish - AENOR
    Learn More
    €88.00

  • NBN EN 12622+A1:2013

    Safety of machine tools - Hydraulic press brakes
    12/19/2013 - PDF - German - NBN
    Learn More
    €105.00

  • NBN EN 12622+A1:2013

    Safety of machine tools - Hydraulic press brakes
    12/19/2013 - PDF - English - NBN
    Learn More
    €105.00

  • NBN EN 12622+A1:2013

    Safety of machine tools - Hydraulic press brakes
    12/19/2013 - PDF - French - NBN
    Learn More
    €105.00

  • NF EN 12622/IN1, E63-022/IN1 (12/2013)

    Safety of machine tools - Hydraulic press brakes - Sécurité des machines-outils
    12/1/2013 - Paper - French - AFNOR
    Learn More
    €22.83

  • NF EN 12622+A1, E63-022 (12/2013)

    Safety of machine tools - Hydraulic press brakes - Sécurité des machines-outils
    12/1/2013 - Paper - French - AFNOR
    Learn More
    €127.55

  • ISO 9448-1:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 1: Forms
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9448-1:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 1: Forms
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9448-2:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9448-2:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9448-3:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 3: Form B, ball cage bushes, plain, type 1
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9448-3:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 3: Form B, ball cage bushes, plain, type 1
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9448-4:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9448-4:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9448-5:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9448-5:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9448-6:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9448-6:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9448-7:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9448-7:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9448-8:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9448-8:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9448-9:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9448-9:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9448-10:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 10: Form E, gliding bushes, flanged, type 2
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9448-10:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 10: Form E, gliding bushes, flanged, type 2
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9448-11:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 11: Form F, ball cage bushes, flanged, type 2
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9448-11:2013 (R2019)

    Tools for pressing -- Guide bushes -- Part 11: Form F, ball cage bushes, flanged, type 2
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9182-1:2013 (R2019)

    Tools for pressing -- Guide pillars -- Part 1: Types
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9182-1:2013 (R2019)

    Tools for pressing -- Guide pillars -- Part 1: Types
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9182-2:2013 (R2019)

    Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9182-2:2013 (R2019)

    Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9182-3:2013 (R2019)

    Tools for pressing -- Guide pillars -- Part 3: Type B, end-locking pillars
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9182-3:2013 (R2019)

    Tools for pressing -- Guide pillars -- Part 3: Type B, end-locking pillars
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9182-4:2013 (R2019)

    Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9182-4:2013 (R2019)

    Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 9182-5:2013 (R2019)

    Tools for pressing -- Guide pillars -- Part 5: Type D, end-locking pillars with flange
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 9182-5:2013 (R2019)

    Tools for pressing -- Guide pillars -- Part 5: Type D, end-locking pillars with flange
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 23481:2013

    Tools for pressing -- Cam driver plates
    12/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 23481:2013

    Tools for pressing -- Cam driver plates
    12/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • NF ISO 8405, E63-513 (12/2013)

    Tools for moulding - Ejector sleeves with cylindrical head - Basic series for general purposes - Outillage de moulage
    12/1/2013 - Paper - French - AFNOR
    Learn More
    €30.64

  • BS EN 12622:2009+A1:2013


    10/31/2013 - PDF - English - BSI
    Learn More
    €282.90

  • VDI 3347:2013-10

    Design and use of die buttons in large stamping dies
    10/1/2013 - PDF - English, German - VDI
    Learn More
    €94.38

  • VDI 3003 Blatt 3:2013-10

    Nitrogen gas springs in large stamping dies - Nitrogen gas springs with enhanced force and low height
    10/1/2013 - PDF - English, German - VDI
    Learn More
    €51.35

  • VDI 3003 Blatt 4:2013-10

    Nitrogen gas springs in large stamping dies - Nitrogen gas springs with enhanced force
    10/1/2013 - PDF - English, German - VDI
    Learn More
    €51.35

  • VDI 3003 Blatt 5:2013-10

    Nitrogen gas springs for large stamping dies - Mounting versions
    10/1/2013 - PDF - English, German - VDI
    Learn More
    €71.24

  • BS ISO 8404:2013

    Tools for moulding. Angle pins
    9/30/2013 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 8405:2013

    Tools for moulding. Ejector sleeves with cylindrical head. Basic series for general purposes
    9/30/2013 - PDF - English - BSI
    Learn More
    €121.90

  • VDI 3349:2013-09

    Trim steels for large stamping dies
    9/1/2013 - PDF - English, German - VDI
    Learn More
    €112.06

  • ISO 8404:2013 (R2018)

    Tools for moulding -- Angle pins
    9/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 8404:2013 (R2018)

    Tools for moulding -- Angle pins
    9/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 8405:2013 (R2018)

    Tools for moulding -- Ejector sleeves with cylindrical head -- Basic series for general purposes
    9/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 8405:2013 (R2018)

    Tools for moulding -- Ejector sleeves with cylindrical head -- Basic series for general purposes
    9/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • NF EN ISO 28881, E60-450 (09/2013)

    Machine tools - Safety - Electro-discharge machines - Machines-outils
    9/1/2013 - Paper - French - AFNOR
    Learn More
    €127.55

  • DIN 8588:2013-08

    Manufacturing processes severing - Classification, subdivision, terms and definitions
    8/1/2013 - PDF - German - DIN
    Learn More
    €89.00

  • VDI 3359:2013-07

    Flanged holes - Flange forming
    7/1/2013 - PDF - English, German - VDI
    Learn More
    €51.35

  • ANSI B 11.2-2013

    Safety Requirements for Hydraulic and Pneumatic Power Presses
    5/5/2013 - PDF - English - ANSI
    Learn More
    €95.00

  • NF ISO 23480, E63-145 (05/2013)

    Tools for pressing - Sliding plates - Outillage de presse
    5/1/2013 - Paper - French - AFNOR
    Learn More
    €42.41

  • UNE-EN 16252:2013

    Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
    4/17/2013 - PDF - English - AENOR
    Learn More
    €75.60

  • UNE-EN 16252:2013

    Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
    4/17/2013 - PDF - Spanish - AENOR
    Learn More
    €63.00

  • VDI 3417:2013-04

    Realization and documentation of sheet metal forming simulation - System requirements
    4/1/2013 - PDF - English, German - VDI
    Learn More
    €112.06

  • BS ISO 23480:2013

    Tools for pressing. Sliding plates
    3/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • DIN EN 16252:2013-03

    Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements; German version EN 16252:2012
    3/1/2013 - PDF - German - DIN
    Learn More
    €119.60

  • DIN EN 16252:2013-03

    Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements; German version EN 16252:2012
    3/1/2013 - PDF - English - DIN
    Learn More
    €149.40

  • NF EN 16252, H96-200 (03/2013)

    Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements - Machines de compactage pour déchets ou matières recyclables
    3/1/2013 - Paper - French - AFNOR
    Learn More
    €87.56

Items 1 to 200 of 819 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5