Closure for annual leave, no order will be honored August 1 to August 19, 2019 included.

Call +33 (1) 40 02 03 05
Type de carte de crédit

25.060 : Machine tool systems

Items 1 to 200 of 880 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • PR NF ISO 26623-1, E62-509-1PR (05/2019)


    5/1/2019 - Paper - French - AFNOR
    Learn More
    €78.60

  • DIN 4003-90:2018-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 90: Tool holders for indexable inserts
    12/1/2018 - PDF - German - DIN
    Learn More
    €209.50

  • DIN 4000-90:2018-12

    Tabular layouts of properties - Part 90: Tool holders for indexable inserts
    12/1/2018 - PDF - German - DIN
    Learn More
    €108.80

  • DIN ISO 12164-3:2018-12

    Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools (ISO 12164-3:2014)
    12/1/2018 - PDF - German - DIN
    Learn More
    €61.70

  • DIN ISO 12164-4:2018-12

    Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools (ISO 12164-4:2014)
    12/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • NF ISO 5169, E60-204 (12/2018)

    Machine tools - Presentation of lubrication instructions
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €30.64

  • DIN 9811-2:2018-10

    Press tool sets - Part 2: Directives for mounting
    10/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 9811-1:2018-08

    Press tool sets - Part 1: Technical specifications
    8/1/2018 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 6535:2018-05

    Hardened parallel shanks for machining tools - Dimensions
    5/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 4000-180:2017-11

    Tabular layouts of properties - Part 180: Tool assemblies
    11/1/2017 - PDF - German - DIN
    Learn More
    €119.60

  • DIN 4003-180:2017-11

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 180: Tool assemblies
    11/1/2017 - PDF - German - DIN
    Learn More
    €103.00

  • NF ISO 26622-1, E62-510-1 (09/2017)

    Modular taper interface with ball track system - Part 1 : dimensions and designation of shanks - Interfaces à cône modulaire avec système de serrage à billes - Partie 1 : Dimensions et désignation des queues
    9/1/2017 - Paper - French - AFNOR
    Learn More
    €53.41

  • BS ISO 26622-1:2017

    Modular taper interface with ball track system. Dimensions and designation of shanks
    6/22/2017 - PDF - English - BSI
    Learn More
    €144.90

  • ISO 26622-1:2017

    Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks
    4/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 26622-1:2017

    Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks
    4/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • VDI 3356:2017-03

    Guide pillars with lead-in chamfer in large stamping dies - Supplement to DIN 9833 und ISO 9182-3
    3/1/2017 - PDF - English, German - VDI
    Learn More
    €51.35

  • NF ISO 238, E66-538 (03/2017)

    Reduction sleeves and extension sockets for tools with Morse taper shanks - Douilles de réduction et allonges pour outils au cône Morse
    3/1/2017 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 4202, E62-529 (01/2017)

    Reduction sleeves with external 7/24 taper for tools with Morse taper shanks - Douilles de réduction au cône extérieur 7/24 pour outils à queue cône Morse
    1/1/2017 - Paper - French - AFNOR
    Learn More
    €30.64

  • DIN 4000-95:2016-12

    Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices
    12/1/2016 - PDF - German - DIN
    Learn More
    €180.80

  • DIN 4000-178:2016-12

    Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli
    12/1/2016 - PDF - German - DIN
    Learn More
    €136.80

  • DIN 4003-178:2016-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 178: Probing systems, stylus systems and styli
    12/1/2016 - PDF - German - DIN
    Learn More
    €82.60

  • BS ISO 4202:2016

    Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
    11/30/2016 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 4207:2016

    Counterbores with Morse taper shanks and detachable pilots
    11/30/2016 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 238:2016

    Reduction sleeves and extension sockets for tools with Morse taper shanks
    11/30/2016 - PDF - English - BSI
    Learn More
    €144.90

  • NF ISO 10897, E62-512 (11/2016)

    Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts - Pinces de serrage pour mandrins à conicité 1:10 - Pinces, mandrins à pinces, écrous de serrage
    11/1/2016 - Paper - French - AFNOR
    Learn More
    €53.41

  • ISO 4202:2016

    Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
    11/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 4202:2016

    Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
    11/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 238:2016

    Reduction sleeves and extension sockets for tools with Morse taper shanks
    11/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 238:2016

    Reduction sleeves and extension sockets for tools with Morse taper shanks
    11/1/2016 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 4207:2016

    Counterbores with Morse taper shanks and detachable pilots
    11/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 4207:2016

    Counterbores with Morse taper shanks and detachable pilots
    11/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • BS ISO 10897:2016

    Collets for tool holders with taper ratio 1:10. Collets, holders, nuts
    9/30/2016 - PDF - English - BSI
    Learn More
    €144.90

  • ISO 10897:2016

    Collets for tool holders with taper ratio 1:10 -- Collets, holders, nuts
    9/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 10897:2016

    Collets for tool holders with taper ratio 1:10 -- Collets, holders, nuts
    9/1/2016 - Paper - French - ISO
    Learn More
    €61.00

  • IEC/TS 60204-34 (2016-08)

    IEC TS 60204-34:2016 Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools
    8/9/2016 - PDF - English - CEI
    Learn More
    €203.00

  • NF ISO 447, E60-031 (06/2016)

    Machies tools - Direction of operation of controls - Machines-outils - Sens de manœuvre des organes de commande
    6/1/2016 - Paper - French - AFNOR
    Learn More
    €22.83

  • DIN 69002-1:2016-06

    Machine tools - Stub spindles - Part 1: General, description, basic principles
    6/1/2016 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 69002-2:2016-06

    Machine tools - Stub spindles - Part 2: Dimensions and lists of parts, designation
    6/1/2016 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 69002-3:2016-06

    Machine tools - Stub spindles - Part 3: Components
    6/1/2016 - PDF - German - DIN
    Learn More
    €75.40

  • NF ISO 10889-3, E66-550-3 (06/2016)

    Tool holders with cylindrical shank - Part 3 : Type B with rectangular radial seat - Porte-outil à queue cylindrique - Partie 3 : Porte-outil radial de type B
    6/1/2016 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF ISO 10889-7, E66-550-7 (06/2016)

    Tool holders with cylindrical shank - Part 7 : type F with taper seat - Porte-outil à queue cylindrique - Partie 7 : Porte-outil de type F pour outils à queue conique
    6/1/2016 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 10889-6, E66-550-6 (06/2016)

    Tool holders with cylindrical shank - Part 6 : type E with cylindrical seat - Porte-outil à queue cylindrique - Partie 6 : porte-outil de type E pour outils à queue cylindrique
    6/1/2016 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF ISO 10889-4, E66-550-4 (06/2016)

    Tool holders with cylindrical shank - Part 4 : type C with rectangular axial seat - Porte-outil à queue cylindrique - Partie 4 : porte-outil axial de type C
    6/1/2016 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF ISO 10889-2, E66-550-2 (06/2016)

    Tool holders with cylindrical shank - Part 2 : type A, shanks for tool holders of special designs - Porte-outil à queue cylindrique - Partie 2 : porte-outil de type A de conceptions spéciales
    6/1/2016 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 10889-5, E66-550-5 (06/2016)

    Tool holders with cylindrical shank - Part 5 : type D with more than one rectangular seat - Porte-outil à queue cylindrique - Partie 5 : Porte-outil de type D comportant plusieurs logements
    6/1/2016 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 7388-3, E62-540-3 (05/2016)

    Tool shanks with 7/24 taper for automatic tool changers - Part 3 : retention knobs of forms AD, AF, UD, UF, JD and JF - Queues d'outils à conicité 7/24 pour changement automatique d'outils - Partie 3 : Tirettes de formes AD, AF, UD, UF, JD et JF
    5/1/2016 - Paper - French - AFNOR
    Learn More
    €53.41

  • ASTM E2672-16

    Standard Practice for Identification and Categorization of Tooling
    4/1/2016 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM E2672-16 + Redline

    Standard Practice for Identification and Categorization of Tooling
    4/1/2016 - PDF - English - ASTM
    Learn More
    €52.00

  • BS ISO 10889-2:2016

    Tool holders with cylindrical shank. Type A, shanks for tool holders of special designs
    3/31/2016 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 10889-3:2016

    Tool holders with cylindrical shank. Type B with rectangular radial seat
    3/31/2016 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 10889-4:2016

    Tool holders with cylindrical shank. Type C with rectangular axial seat
    3/31/2016 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 10889-6:2016

    Tool holders with cylindrical shank. Type E with cylindrical seat
    3/31/2016 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 10889-7:2016

    Tool holders with cylindrical shank. Type F with taper seat
    3/31/2016 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 10889-5:2016

    Tool holders with cylindrical shank. Type D with more than one rectangular seat
    3/31/2016 - PDF - English - BSI
    Learn More
    €144.90

  • ISO 10889-5:2016

    Tool holders with cylindrical shank -- Part 5: Type D with more than one rectangular seat
    3/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10889-5:2016

    Tool holders with cylindrical shank -- Part 5: Type D with more than one rectangular seat
    3/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 10889-2:2016

    Tool holders with cylindrical shank -- Part 2: Type A, shanks for tool holders of special designs
    3/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10889-2:2016

    Tool holders with cylindrical shank -- Part 2: Type A, shanks for tool holders of special designs
    3/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 10889-3:2016

    Tool holders with cylindrical shank -- Part 3: Type B with rectangular radial seat
    3/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 10889-3:2016

    Tool holders with cylindrical shank -- Part 3: Type B with rectangular radial seat
    3/1/2016 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 10889-4:2016

    Tool holders with cylindrical shank -- Part 4: Type C with rectangular axial seat
    3/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 10889-4:2016

    Tool holders with cylindrical shank -- Part 4: Type C with rectangular axial seat
    3/1/2016 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 10889-6:2016

    Tool holders with cylindrical shank -- Part 6: Type E with cylindrical seat
    3/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 10889-6:2016

    Tool holders with cylindrical shank -- Part 6: Type E with cylindrical seat
    3/1/2016 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 10889-7:2016

    Tool holders with cylindrical shank -- Part 7: Type F with taper seat
    3/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10889-7:2016

    Tool holders with cylindrical shank -- Part 7: Type F with taper seat
    3/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • BS ISO 7388-3:2016

    Tool shanks with 7/24 taper for automatic tool changers. Retention knobs of forms AD, AF, UD, UF, JD and JF
    2/29/2016 - PDF - English - BSI
    Learn More
    €144.90

  • ISO 7388-3:2016

    Tool shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
    2/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 7388-3:2016

    Tool shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
    2/1/2016 - Paper - French - ISO
    Learn More
    €61.00

  • BS ISO 26622-2:2008


    9/30/2015 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 702-1:2009


    8/31/2015 - PDF - English - BSI
    Learn More
    €144.90

  • JIS B 6339-3/ERRATUM 1:2015

    ERRATUM
    4/3/2015 - PDF - Japanese - JSA
    Learn More
    €0.00

  • JIS B 6150:2015

    Machine-tools safety - Safety requirements for the design and construction of work holding chucks
    3/20/2015 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 6151:2015

    Scroll chucks
    3/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN ISO 7388-3:2015-03

    Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF (ISO 7388-3:2013)
    3/1/2015 - PDF - German - DIN
    Learn More
    €61.70

  • DIN ISO 7388-3:2015-03

    Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF (ISO 7388-3:2013)
    3/1/2015 - PDF - English - DIN
    Learn More
    €77.20

  • NF ISO 12164-3, E62-507-3 (03/2015)

    Hollow taper interface with flange contact surface - Part 3 : dimensions of shanks for stationary tools
    3/1/2015 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF ISO 12164-4, E62-507-4 (03/2015)

    Hollow taper interface with flange contact surface - Part 4 : dimensions of receivers for stationary tools
    3/1/2015 - Paper - French - AFNOR
    Learn More
    €42.41

  • DIN ISO 5610-1:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 1: General survey, correlation and determination of dimensions (ISO 5610-1:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €82.60

  • DIN ISO 5610-1:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 1: General survey, correlation and determination of dimensions (ISO 5610-1:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €103.10

  • DIN ISO 5610-2:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 2: Style A (ISO 5610-2:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €54.80

  • DIN ISO 5610-2:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 2: Style A (ISO 5610-2:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €68.50

  • DIN ISO 5610-3:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 3: Style B (ISO 5610-3:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €54.80

  • DIN ISO 5610-3:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 3: Style B (ISO 5610-3:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €68.50

  • DIN ISO 5610-4:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 4: Style D (ISO 5610-4:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €54.80

  • DIN ISO 5610-4:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 4: Style D (ISO 5610-4:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €68.50

  • DIN ISO 5610-5:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 5: Style F (ISO 5610-5:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €61.70

  • DIN ISO 5610-5:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 5: Style F (ISO 5610-5:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €77.20

  • DIN ISO 5610-6:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 6: Style G (ISO 5610-6:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €54.80

  • DIN ISO 5610-6:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 6: Style G (ISO 5610-6:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €68.50

  • DIN ISO 5610-7:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 7: Style J (ISO 5610-7:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €61.70

  • DIN ISO 5610-7:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 7: Style J (ISO 5610-7:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €77.20

  • DIN ISO 5610-8:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 8: Style K (ISO 5610-8:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €61.70

  • DIN ISO 5610-8:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 8: Style K (ISO 5610-8:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €77.20

  • DIN ISO 5610-9:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 9: Style L (ISO 5610-9:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €54.80

  • DIN ISO 5610-9:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 9: Style L (ISO 5610-9:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €68.50

  • DIN ISO 5610-10:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 10: Style N (ISO 5610-10:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €54.80

  • DIN ISO 5610-10:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 10: Style N (ISO 5610-10:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €68.50

  • DIN ISO 5610-11:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 11: Style R (ISO 5610-11:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €54.80

  • DIN ISO 5610-11:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 11: Style R (ISO 5610-11:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €68.50

  • DIN ISO 5610-12:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 12: Style S (ISO 5610-12:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €68.30

  • DIN ISO 5610-12:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 12: Style S (ISO 5610-12:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €85.50

  • DIN ISO 5610-13:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 13: Style T (ISO 5610-13:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €47.60

  • DIN ISO 5610-13:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 13: Style T (ISO 5610-13:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €59.60

  • DIN ISO 5610-14:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 14: Style H (ISO 5610-14:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €54.80

  • DIN ISO 5610-14:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 14: Style H (ISO 5610-14:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €68.50

  • DIN ISO 5610-15:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 15: Style V (ISO 5610-15:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €47.60

  • DIN ISO 5610-15:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 15: Style V (ISO 5610-15:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €59.60

  • BS ISO 12164-3:2014

    Hollow taper interface with flange contact surface. Dimensions of shanks for stationary tools
    12/31/2014 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 12164-4:2014

    Hollow taper interface with flange contact surface. Dimensions of receivers for stationary tools
    12/31/2014 - PDF - English - BSI
    Learn More
    €144.90

  • NF ISO 26623-1, E62-509-1 (12/2014)

    Polygonal taper interface with flange contact surface - Part 1 : dimensions and designation of shanks
    12/1/2014 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF ISO 26623-2, E62-509-2 (12/2014)

    Polygonal taper interface with flange contact surface - Part 2 : dimensions and designation of receivers
    12/1/2014 - Paper - French - AFNOR
    Learn More
    €42.41

  • ISO 12164-3:2014

    Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools
    12/1/2014 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 12164-3:2014

    Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools
    12/1/2014 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 12164-4:2014

    Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools
    12/1/2014 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 12164-4:2014

    Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools
    12/1/2014 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 26623-1:2014

    Polygonal taper interface with flange contact surface -- Part 1: Dimensions and designation of shanks
    9/1/2014 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 26623-1:2014

    Polygonal taper interface with flange contact surface -- Part 1: Dimensions and designation of shanks
    9/1/2014 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 26623-2:2014

    Polygonal taper interface with flange contact surface -- Part 2: Dimensions and designation of receivers
    9/1/2014 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 26623-2:2014

    Polygonal taper interface with flange contact surface -- Part 2: Dimensions and designation of receivers
    9/1/2014 - Paper - French - ISO
    Learn More
    €40.00

  • BS ISO 26623-1:2014

    Polygonal taper interface with flange contact surface. Dimensions and designation of shanks
    8/31/2014 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 26623-2:2014

    Polygonal taper interface with flange contact surface. Dimensions and designation of receivers
    8/31/2014 - PDF - English - BSI
    Learn More
    €121.90

  • DIN ISO 7388-1:2014-07

    Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007)
    7/1/2014 - PDF - German - DIN
    Learn More
    €54.80

  • DIN ISO 7388-1:2014-07

    Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007)
    7/1/2014 - PDF - English - DIN
    Learn More
    €68.50

  • DIN ISO 7388-2:2014-07

    Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF (ISO 7388-2:2007)
    7/1/2014 - PDF - German - DIN
    Learn More
    €47.60

  • DIN ISO 7388-2:2014-07

    Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF (ISO 7388-2:2007)
    7/1/2014 - PDF - English - DIN
    Learn More
    €59.60

  • DIN 9834:2014-03

    Tools for pressing - Guide bushes
    3/1/2014 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 6386-1:2014-03

    Lathe chucks - Part 1: Technical conditions of delivery for hand operated lathe chucks
    3/1/2014 - PDF - German - DIN
    Learn More
    €54.80

  • NF ISO 10649-1, E62-514-1 (01/2014)

    Cutter arbors with parallel key and tenon drive - Part 1 : general dimensions
    1/1/2014 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 10649-2, E62-514-2 (01/2014)

    Cutter arbors with parrallel key and tenon drive - Part 2 : dimensions and designation of tool holders with taper interface with flange contact surface
    1/1/2014 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 10649-3, E62-514-3 (01/2014)

    Cutter arbors with parallel key and tenon drive - Part 3 : dimensions and designation of tool holders with 7/24 taper for automatic tool changer
    1/1/2014 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 10649-4, E62-514-4 (01/2014)

    Cutter arbors with parallel key and tenon drive - Part 4 : dimensions and designation of tool holders with 7/24 taper without automatic tool changer
    1/1/2014 - Paper - French - AFNOR
    Learn More
    €42.41

  • BS ISO 9182-1:2013

    Tools for pressing. Guide pillars. Types
    12/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9182-2:2013

    Tools for pressing. Guide pillars. Type A, straight pillars
    12/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9182-3:2013

    Tools for pressing. Guide pillars. Type B, end-locking pillars
    12/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9182-4:2013

    Tools for pressing. Guide pillars. Type C, pillars with taper lead and bush
    12/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 9182-5:2013

    Tools for pressing. Guide pillars. Type D, end-locking pillars with flange
    12/31/2013 - PDF - English - BSI
    Learn More
    €121.90

  • JIS B 6064-1:2013

    Hollow taper interface with flange contact surface - Part 1: Shanks - Dimensions
    12/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 6064-2:2013

    Hollow taper interface with flange contact surface - Part 2: Receivers - Dimensions
    12/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 6064-3:2013

    Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools
    12/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 6064-4:2013

    Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools
    12/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 6065-1:2013

    Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks
    12/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 6065-2:2013

    Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers
    12/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 6066-1:2013

    Polygonal taper interface with flange contact surface - Part 1: Dimensions and designation of shanks
    12/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 6066-2:2013

    Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers
    12/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN 4003-89:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 89: Adaptive items for tools and extenders
    12/1/2013 - PDF - German - DIN
    Learn More
    €119.60

  • DIN 4003-93:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads
    12/1/2013 - PDF - German - DIN
    Learn More
    €163.80

  • DIN 4003-172:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 172: Driven tool units
    12/1/2013 - PDF - German - DIN
    Learn More
    €130.80

  • DIN IEC/TS 60204-34 VDE V 0113-34:2013-12

    Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools (IEC 44/684/CD:2013)
    12/1/2013 - Paper - German - VDE
    Learn More
    €95.02

  • BS ISO 10649-1:2013

    Cutter arbors with parallel key and tenon drive. General dimensions
    11/30/2013 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 10649-2:2013

    Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with taper interface with flange contact surface
    10/31/2013 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 10649-3:2013

    Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
    10/31/2013 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 10649-4:2013

    Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
    10/31/2013 - PDF - English - BSI
    Learn More
    €144.90

  • JIS B 1193-1:2013

    Ball splines - Part 1: General characteristics and requirements
    10/21/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1193-2:2013

    Ball splines - Part 2: Dynamic and static load ratings and rating life
    10/21/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN ISO 26622-2:2013-10

    Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers (ISO 26622-2:2008)
    10/1/2013 - PDF - German - DIN
    Learn More
    €40.80

  • DIN ISO 26622-2:2013-10

    Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers (ISO 26622-2:2008)
    10/1/2013 - PDF - English - DIN
    Learn More
    €51.00

  • ISO 10649-1:2013 (R2019)

    Cutter arbors with parallel key and tenon drive -- Part 1: General dimensions
    10/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10649-1:2013 (R2019)

    Cutter arbors with parallel key and tenon drive -- Part 1: General dimensions
    10/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 10649-2:2013 (R2019)

    Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
    10/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10649-2:2013 (R2019)

    Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
    10/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 10649-3:2013 (R2019)

    Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
    10/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10649-3:2013 (R2019)

    Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
    10/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 10649-4:2013 (R2019)

    Cutter arbors with parallel key and tenon drive -- Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
    10/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10649-4:2013 (R2019)

    Cutter arbors with parallel key and tenon drive -- Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
    10/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • VDI 3349:2013-09

    Trim steels for large stamping dies
    9/1/2013 - PDF - English, German - VDI
    Learn More
    €112.06

  • DIN 6597:2013-09

    Tool holders for external and internal turning with hollow taper shank for indexable inserts - Designation
    9/1/2013 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 6598:2013-09

    Tool holders for external and internal turning with hollow taper shank for indexable inserts - General survey, Correlation of dimensions
    9/1/2013 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 4000-93:2013-08

    Tabular layouts of properties - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads
    8/1/2013 - PDF - German - DIN
    Learn More
    €89.00

  • DIN ISO 26622-1:2013-08

    Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks (ISO 26622-1:2008)
    8/1/2013 - PDF - German - DIN
    Learn More
    €68.30

  • DIN ISO 26622-1:2013-08

    Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks (ISO 26622-1:2008)
    8/1/2013 - PDF - English - DIN
    Learn More
    €85.50

  • UNE-ISO 23848-1:2013

    Machine tools -- Ball splines -- Part 1: General characteristics and requirements
    3/25/2013 - PDF - Spanish - AENOR
    Learn More
    €58.00

  • UNE-ISO 23848-2:2013

    Machine tools -- Ball splines -- Part 2: Dynamic and static load ratings and rating life
    3/25/2013 - PDF - Spanish - AENOR
    Learn More
    €48.00

  • DIN 79:2013-02

    Squares for operating spindles and operating elements
    2/1/2013 - PDF - German - DIN
    Learn More
    €33.60

  • UNE-ISO 3089:2013

    Machine tools -- Test conditions for self-centring, manually operated chucks with one-piece jaws
    1/16/2013 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-ISO 3442-1:2013

    Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 1: Manually operated chucks with tongue and groove type jaws
    1/16/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-ISO 3442-2:2013

    Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 2: Power-operated chucks with tongue and groove type jaws
    1/16/2013 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-ISO 3442-3:2013

    Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 3: Power-operated chucks with serrated jaws
    1/16/2013 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • DIN 9831-1:2013-01

    Tools for pressing - Guide bushes for press tool sets - Part 1: Type AG, Type BG and Type CG, gliding bushes
    1/1/2013 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 9831-2:2013-01

    Tools for pressing - Guide bushes for press tool sets - Part 2: Type AW, Type BW and Type CW, ball cage bushes
    1/1/2013 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 4000-172:2012-12

    Tabular layouts of properties - Part 172: Driven tool units
    12/1/2012 - PDF - German - DIN
    Learn More
    €103.00

  • DIN 69893-5:2012-10

    Hollow taper shanks with flat contact surface - Part 5: Hollow taper shanks type E; Dimensions and design
    10/1/2012 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 69063-5:2012-10

    Machine tools - Tool receiver for hollow taper shanks - Part 5: For type E according to DIN 69893-5; Connecting dimensions
    10/1/2012 - PDF - German - DIN
    Learn More
    €47.60

  • BS ISO 10649-5:2012 (R2017)

    Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
    9/30/2012 - PDF - English - BSI
    Learn More
    €121.90

  • BS ISO 10649-6:2012 (R2017)

    Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with modular taper interface with ball track system
    9/30/2012 - PDF - English - BSI
    Learn More
    €121.90

  • NF ISO 10649-5, E62-514-5 (09/2012)

    Cutter arbors with parallel key and tenon drive - Part 5 : dimensions and designation of tool holders with polygonal interface with flange contact surface
    9/1/2012 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF ISO 10649-6, E62-514-6 (09/2012)

    Cutter arbors with parallel key and tenon drive - Part 6 : dimensions and desigantion of tool holders with modular taper interface with ball track system
    9/1/2012 - Paper - French - AFNOR
    Learn More
    €42.41

  • BS ISO 5608:2012 (R2017)

    Turning and copying tool holders and cartridges for indexable inserts. Designation
    8/31/2012 - PDF - English - BSI
    Learn More
    €144.90

  • VDI 5584:2012-08 (R2016)

    Palletisation for mechanical ultraprecision manufacturing
    8/1/2012 - PDF - English, German - VDI
    Learn More
    €71.24

  • DIN 9833:2012-07

    Tools for pressing - Guide pillars, type D
    7/1/2012 - PDF - German - DIN
    Learn More
    €40.80

  • ISO 10649-5:2012 (R2017)

    Cutter arbors with parallel key and tenon drive -- Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
    7/1/2012 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10649-5:2012 (R2017)

    Cutter arbors with parallel key and tenon drive -- Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
    7/1/2012 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 10649-6:2012 (R2017)

    Cutter arbors with parallel key and tenon drive -- Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
    7/1/2012 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10649-6:2012 (R2017)

    Cutter arbors with parallel key and tenon drive -- Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
    7/1/2012 - Paper - French - ISO
    Learn More
    €40.00

  • UNE-ISO 369:2012

    Machine tools -- Symbols for indications appearing on machine tools
    3/14/2012 - PDF - Spanish - AENOR
    Learn More
    €97.00

  • DIN 4000-89:2012-03

    Tabular layouts of properties - Part 89: Adaptive items for tools and extenders
    3/1/2012 - PDF - German - DIN
    Learn More
    €153.40

  • DIN 4000-94:2012-01

    Tabular layouts of properties - Part 94: Quick change adaptors
    1/1/2012 - PDF - German - DIN
    Learn More
    €68.30

  • ASTM E2497-11(2017)

    Standard Practice for Calculation of Asset Movement Velocity (AMV)
    12/1/2011 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM E2497-11 + Redline

    Standard Practice for Calculation of Asset Movement Velocity (AMV)
    12/1/2011 - PDF - English - ASTM
    Learn More
    €42.00

  • DIN 69010:2011-11

    Transfer centers - Interface machine frame - Multi spindle heads and other modular units, Frame sizes and dimensions
    11/1/2011 - PDF - German - DIN
    Learn More
    €82.60

Items 1 to 200 of 880 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5