Call +33 (1) 40 02 03 05

25.040.10 : Machining centres

99 Item(s)

Set Ascending Direction
per page

List  Grid 

  • PR NF E60-172-7, PR NF ISO 10791-7 (07/2018)

    Test conditions for machining centres - Part 7 : Accuracy of finished test piece
    7/6/2018 - Paper - French -
    Learn More
    €105.05

  • NF E60-172-1, NF ISO 10791-1 (03/2016)

    Test conditions for machining centres - Part 1 : geometric tests for machines with horizontal spindle (horizontal Z-axis)
    3/17/2016 - Paper - English -
    Learn More
    €136.35

  • NF E60-172-1, NF ISO 10791-1 (03/2016)

    Test conditions for machining centres - Part 1 : geometric tests for machines with horizontal spindle (horizontal Z-axis)
    3/17/2016 - Paper - French -
    Learn More
    €136.35

  • NF E60-172-7, NF ISO 10791-7 (09/2015)

    Test conditions for machining centres - Part 7 : accuracy of a finished test pieces
    9/19/2015 - Paper - French -
    Learn More
    €76.40

  • NF E60-172-7, NF ISO 10791-7 (09/2015)

    Test conditions for machining centres - Part 7 : accuracy of a finished test pieces
    9/19/2015 - Paper - English -
    Learn More
    €76.40

  • UNE-EN ISO 11064-4:2013

    Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013) (Endorsed by AENOR in April of 2015.)
    4/1/2015 - PDF - English -
    Learn More
    €84.00

  • NF E60-172-6, NF ISO 10791-6 (02/2015)

    Test conditions for machining centres - Part 6 : accuracy of speeds and interpolations
    2/28/2015 - Paper - English -
    Learn More
    €115.12

  • NF E60-172-6, NF ISO 10791-6 (02/2015)

    Test conditions for machining centres - Part 6 : accuracy of speeds and interpolations
    2/28/2015 - Paper - French -
    Learn More
    €115.12

  • BS ISO 10791-1:2015

    Test conditions for machining centres. Geometric tests for machines with horizontal spindle (horizontal Z-axis)
    2/28/2015 - PDF - English -
    Learn More
    €303.60

  • ISO 10791-1:2015

    Test conditions for machining centres -- Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
    2/1/2015 - Paper - English -
    Learn More
    €207.00

  • ISO 10791-1:2015

    Test conditions for machining centres -- Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
    2/1/2015 - Paper - French -
    Learn More
    €207.00

  • BS ISO 10791-6:2014

    Test conditions for machining centres. Accuracy of speeds and interpolations
    1/31/2015 - PDF - English -
    Learn More
    €282.90

  • BS ISO 10791-7:2014

    Test conditions for machining centres. Accuracy of finished test pieces
    12/31/2014 - PDF - English -
    Learn More
    €236.90

  • ISO 10791-6:2014

    Test conditions for machining centres -- Part 6: Accuracy of speeds and interpolations
    12/1/2014 - Paper - French -
    Learn More
    €165.00

  • ISO 10791-7:2014

    Test conditions for machining centres -- Part 7: Accuracy of finished test pieces
    12/1/2014 - Paper - French -
    Learn More
    €123.00

  • ISO 10791-6:2014

    Test conditions for machining centres -- Part 6: Accuracy of speeds and interpolations
    12/1/2014 - Paper - Russian -
    Learn More
    €165.00

  • ISO 10791-7:2014

    Test conditions for machining centres -- Part 7: Accuracy of finished test pieces
    12/1/2014 - Paper - Russian -
    Learn More
    €123.00

  • ISO 10791-6:2014

    Test conditions for machining centres -- Part 6: Accuracy of speeds and interpolations
    12/1/2014 - Paper - English -
    Learn More
    €165.00

  • ISO 10791-7:2014

    Test conditions for machining centres -- Part 7: Accuracy of finished test pieces
    12/1/2014 - Paper - English -
    Learn More
    €123.00

  • JIS B 6336-10:2014

    Test conditions for machining centres - Part 10: Evaluation of thermal distortions
    5/20/2014 - PDF - Japanese -
    Learn More
    €25.00

  • VDI/NCG 5211 Blatt 2:2013-09

    Testing guidelines and testing workpieces for high speed cutting (HSC) - Milling machines and machining centres for the 5-axis simultaneous milling
    9/1/2013 - PDF - English, German -
    Learn More
    €190.84

  • VDI/NCG 5211 Blatt 1:2013-08

    Testing guidelines and testing workpieces for high speed cutting (HSC) - Milling machines and machining centres for 3-axis machining
    8/1/2013 - PDF - English, German -
    Learn More
    €127.14

  • UNE-ISO 10791-10:2009

    Machine tools. Conditions for machining centres. Part 10:Determination of thermal distorsions
    12/2/2009 - PDF - Spanish -
    Learn More
    €44.00

  • UNE-EN ISO 11064-5:2008

    Ergonomic design of control centres - Part 5: Displays and controls (ISO 11064-5:2008) (Endorsed by AENOR in December of 2009.)
    12/1/2009 - PDF - English -
    Learn More
    €96.00

  • DIN EN 12417:2009-07

    Machine tools - Safety - Machining centres; German version EN 12417:2001+A2:2009
    7/1/2009 - PDF - English -
    Learn More
    €156.50

  • DIN EN 12417:2009-07

    Machine tools - Safety - Machining centres; German version EN 12417:2001+A2:2009
    7/1/2009 - PDF - German -
    Learn More
    €125.30

  • UNE-EN 12417:2002+A2:2009 (R2014)

    Machine tools - Safety - Machining centres
    5/27/2009 - PDF - Spanish -
    Learn More
    €70.00

  • NF E60-420/IN2, NF EN 12417/IN2 (04/2009)

    Machine tools - Safety - Machining centres
    4/1/2009 - Paper - French -
    Learn More
    €22.83

  • NF E60-420, NF EN 12417+A2 (04/2009)

    Machine tools - Safety - Machining centres
    4/1/2009 - Paper - English -
    Learn More
    €95.37

  • NF E60-420, NF EN 12417+A2 (04/2009)

    Machine tools - Safety - Machining centres
    4/1/2009 - Paper - French -
    Learn More
    €95.37

  • NF E60-420/IN2, NF EN 12417/IN2 (04/2009)

    Machine tools - Safety - Machining centres
    4/1/2009 - Paper - English -
    Learn More
    €22.83

  • NF E60-172-10, NF ISO 10791-10 (04/2007)

    Test conditions for machining centres - Part 10 : evaluation of thermal distortions
    4/1/2007 - Paper - French -
    Learn More
    €42.41

  • NF E60-172-10, NF ISO 10791-10 (04/2007)

    Test conditions for machining centres - Part 10 : evaluation of thermal distortions
    4/1/2007 - Paper - English -
    Learn More
    €42.41

  • BS ISO 10791-10:2007

    Test conditions for machining centres. Evaluation of thermal distortions
    3/30/2007 - PDF - English -
    Learn More
    €144.90

  • ISO 10791-10:2007 (R2011)

    Test conditions for machining centres -- Part 10: Evaluation of thermal distortions
    3/1/2007 - Paper - English -
    Learn More
    €61.00

  • ISO 10791-10:2007 (R2011)

    Test conditions for machining centres -- Part 10: Evaluation of thermal distortions
    3/1/2007 - Paper - French -
    Learn More
    €61.00

  • UNE 15450-2:2004

    Machine-tools. Test conditions for machining centres. Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z axis).
    3/12/2004 - PDF - Spanish -
    Learn More
    €61.00

  • UNE 15450-8:2003 ERRATUM

    Machine-tools. Test conditions for machining centres. Part 8: Evaluation of the contouring performance in the three coordinate planes.
    11/21/2003 - PDF - Spanish -
    Learn More
    €0.00

  • UNE 15450-9:2003

    Machine-tools. Test conditions for machining centres. Part 9: Evaluation of the operating times of tool change and pallet change.
    10/31/2003 - PDF - Spanish -
    Learn More
    €45.00

  • JIS B 6336-9:2002 (R2016)

    Test conditions for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change
    1/20/2002 - PDF - Japanese -
    Learn More
    €25.00

  • JIS B 6336-2:2002 (R2016)

    Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
    1/20/2002 - PDF - Japanese -
    Learn More
    €46.02

  • JIS B 6336-8:2002 (R2016)

    Test conditions for machining centres - Part 8: Evaluation of the contouring performance in the three coordinate planes
    1/20/2002 - PDF - Japanese -
    Learn More
    €25.00

  • BS EN 12417:2001+A2:2009

    Machine tools. Safety. Machining centres
    8/31/2001 - PDF - English -
    Learn More
    €257.60

  • BS ISO 10791-8:2001 (R2017)

    Test conditions for machining centres. Evaluation of contouring performance in the three coordinate planes
    6/15/2001 - PDF - English -
    Learn More
    €121.90

  • NF E60-172-2, NF ISO 10791-2 (06/2001)

    Test conditions for machining centres - Part 2 : geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
    6/1/2001 - Paper - French -
    Learn More
    €115.12

  • NF E60-172-8, NF ISO 10791-8 (06/2001)

    Test conditions for machining centres - Part 8 : evaluation of the contouring performance in the three coordinate planes
    6/1/2001 - Paper - English -
    Learn More
    €53.41

  • NF E60-172-8, NF ISO 10791-8 (06/2001)

    Test conditions for machining centres - Part 8 : evaluation of the contouring performance in the three coordinate planes
    6/1/2001 - Paper - French -
    Learn More
    €53.41

  • NF E60-172-9, NF ISO 10791-9 (06/2001)

    Test conditions for machining centres - Part 9 : evaluation of the operating times of tool change and pallet change
    6/1/2001 - Paper - English -
    Learn More
    €87.56

  • NF E60-172-9, NF ISO 10791-9 (06/2001)

    Test conditions for machining centres - Part 9 : evaluation of the operating times of tool change and pallet change
    6/1/2001 - Paper - French -
    Learn More
    €87.56

  • NF E60-172-2, NF ISO 10791-2 (06/2001)

    Test conditions for machining centres - Part 2 : geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
    6/1/2001 - Paper - English -
    Learn More
    €115.12

  • BS ISO 10791-2:2001

    Test conditions for machining centres. Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
    5/15/2001 - PDF - English -
    Learn More
    €257.60

  • BS ISO 10791-9:2001 (R2017)

    Test conditions for machining centres. Evaluation of the operating times of tool change and pallet change
    5/15/2001 - PDF - English -
    Learn More
    €202.40

  • ISO 10791-8:2001 (R2017)

    Test conditions for machining centres -- Part 8: Evaluation of contouring performance in the three coordinate planes
    4/1/2001 - Paper - French -
    Learn More
    €40.00

  • ISO 10791-8:2001 (R2017)

    Test conditions for machining centres -- Part 8: Evaluation of contouring performance in the three coordinate planes
    4/1/2001 - Paper - English -
    Learn More
    €40.00

  • UNE 15450-8:2001

    Machine-tools. Test conditions for machining centres. Part 8: Evaluation of the contouring performance in the three coordinate planes.
    3/29/2001 - PDF - Spanish -
    Learn More
    €31.00

  • ISO 10791-2:2001 (R2018)

    Test conditions for machining centres -- Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
    3/1/2001 - Paper - English -
    Learn More
    €165.00

  • ISO 10791-9:2001 (R2017)

    Test conditions for machining centres -- Part 9: Evaluation of the operating times of tool change and pallet change
    3/1/2001 - Paper - English -
    Learn More
    €92.00

  • ISO 10791-2:2001 (R2018)

    Test conditions for machining centres -- Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
    3/1/2001 - Paper - French -
    Learn More
    €165.00

  • ISO 10791-9:2001 (R2017)

    Test conditions for machining centres -- Part 9: Evaluation of the operating times of tool change and pallet change
    3/1/2001 - Paper - French -
    Learn More
    €92.00

  • NBN EN ISO 11064-2:2001

    Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites (ISO 11064-2:2000)
    2/6/2001 - PDF - German -
    Learn More
    €77.00

  • NBN EN ISO 11064-1:2001

    Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000)
    2/6/2001 - PDF - French -
    Learn More
    €105.00

  • NBN EN ISO 11064-1:2001

    Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000)
    2/6/2001 - PDF - German -
    Learn More
    €105.00

  • NBN EN ISO 11064-2:2001

    Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites (ISO 11064-2:2000)
    2/6/2001 - PDF - English -
    Learn More
    €77.00

  • NBN EN ISO 11064-1:2001

    Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000)
    2/6/2001 - PDF - English -
    Learn More
    €105.00

  • NBN EN ISO 11064-2:2001

    Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites (ISO 11064-2:2000)
    2/6/2001 - PDF - French -
    Learn More
    €77.00

  • DIN ISO 10791-4:2001-01

    Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)
    1/1/2001 - PDF - English -
    Learn More
    €59.60

  • DIN ISO 10791-3:2001-01

    Machine tools - Test conditions of machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis) (ISO 10791-3:1998)
    1/1/2001 - PDF - German -
    Learn More
    €114.10

  • DIN ISO 10791-4:2001-01

    Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)
    1/1/2001 - PDF - German -
    Learn More
    €47.60

  • DIN ISO 10791-3:2001-01

    Machine tools - Test conditions of machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis) (ISO 10791-3:1998)
    1/1/2001 - PDF - English -
    Learn More
    €142.80

  • JIS B 6336-4:2000 (R2015)

    Test conditions for machining centers - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
    12/20/2000 - PDF - Japanese -
    Learn More
    €25.00

  • JIS B 6336-5:2000 (R2015)

    Test conditions for machining centers - Part 5: Accuracy and repeatability of positioning of work-holding pallets
    12/20/2000 - PDF - Japanese -
    Learn More
    €25.00

  • JIS B 6336-3:2000 (R2015)

    Test conditions for machining centers - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
    12/20/2000 - PDF - Japanese -
    Learn More
    €50.18

  • UNE 15450-5:2000

    Machine-tools. Test conditions of machining centres. Part 5: Accuracy and repeatability of positioning of working-holding pallets.
    11/10/2000 - PDF - Spanish -
    Learn More
    €33.00

  • UNE 15450-3:2000

    Machine-tools. Test conditions of machining centres. Part 3: Geometric test for machines with integral indexable or continuous universal heads (horizontal Z axis).
    9/30/2000 - PDF - Spanish -
    Learn More
    €68.00

  • UNE 15450-1:2000

    Machine-tools. Test conditions of machining centres. Part 1: Geometric test for machines with horizontal spindle and with accessory heads (horizontal Z axis).
    9/30/2000 - PDF - Spanish -
    Learn More
    €74.00

  • UNE 15450-4:2000

    Machine-tools. Test conditions for machining centres. Part 4: Accuracy and repeatability of positioning of linear and rotary axes.
    9/21/2000 - PDF - Spanish -
    Learn More
    €31.00

  • ISO 10791-3:1998/Cor 1:1999

    Test conditions for machining centres -- Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
    11/1/1999 - Paper - English -
    Learn More
    €0.00

  • ISO 10791-3:1998/Cor 1:1999

    Test conditions for machining centres -- Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
    11/1/1999 - Paper - French -
    Learn More
    €0.00

  • JIS Z 8503-3:1999 (R2015)

    Ergonomic design of control centres - Part 3: Control room layout
    10/20/1999 - PDF - Japanese -
    Learn More
    €41.86

  • NF E60-172-3, NF ISO 10791-3 (05/1999)

    Test conditions for machining centres. Part 3 : geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis).
    5/1/1999 - Paper - English -
    Learn More
    €127.55

  • NF E60-172-3, NF ISO 10791-3 (05/1999)

    Test conditions for machining centres. Part 3 : geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis).
    5/1/1999 - Paper - French -
    Learn More
    €127.55

  • BS ISO 10791-3:1998

    Test conditions for machining centres. Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
    3/15/1999 - PDF - English -
    Learn More
    €282.90

  • IEC/TR 60877 (1999-01)

    IEC TR 60877:1999 Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service
    1/7/1999 - PDF - English, French -
    Learn More
    €71.00

  • ISO 10791-3:1998 (R2014)

    Test conditions for machining centres -- Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
    12/1/1998 - Paper - French -
    Learn More
    €165.00

  • ISO 10791-3:1998 (R2014)

    Test conditions for machining centres -- Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
    12/1/1998 - Paper - English -
    Learn More
    €165.00

  • NF E60-172-5, NF ISO 10791-5 (09/1998)

    Test conditions of machining centres. Part 5 : accuracy and repeatability of positioning of work-holding pallets.
    9/1/1998 - Paper - English -
    Learn More
    €53.41

  • NF E60-172-5, NF ISO 10791-5 (09/1998)

    Test conditions of machining centres. Part 5 : accuracy and repeatability of positioning of work-holding pallets.
    9/1/1998 - Paper - French -
    Learn More
    €53.41

  • NF E60-172-4, NF ISO 10791-4 (09/1998)

    Test conditions for machining centres. Part 4 : accuracy and repetability of positioning of linear and rotary axes.
    9/1/1998 - Paper - English -
    Learn More
    €53.41

  • NF E60-172-4, NF ISO 10791-4 (09/1998)

    Test conditions for machining centres. Part 4 : accuracy and repetability of positioning of linear and rotary axes.
    9/1/1998 - Paper - French -
    Learn More
    €53.41

  • BS ISO 10791-4:1998

    Test conditions for machining centres. Accuracy and repeatability of positioning of linear and rotary axes
    8/15/1998 - PDF - English -
    Learn More
    €121.90

  • ISO 10791-4:1998 (R2014)

    Test conditions for machining centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes
    6/1/1998 - Paper - English -
    Learn More
    €61.00

  • ISO 10791-4:1998 (R2014)

    Test conditions for machining centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes
    6/1/1998 - Paper - French -
    Learn More
    €61.00

  • BS ISO 10791-5:1998

    Test conditions for machining centres. Accuracy and repeatability of positioning of work-holding pallets
    5/15/1998 - PDF - English -
    Learn More
    €144.90

  • ISO 10791-5:1998 (R2014)

    Test conditions for machining centres -- Part 5: Accuracy and repeatability of positioning of work-holding pallets
    2/1/1998 - Paper - English -
    Learn More
    €61.00

  • ISO 10791-5:1998 (R2014)

    Test conditions for machining centres -- Part 5: Accuracy and repeatability of positioning of work-holding pallets
    2/1/1998 - Paper - French -
    Learn More
    €61.00

  • ISO 9524:1993 (R2017)

    Machine tools -- Front faces of spindle holders for machining centres -- Functional dimensions
    9/1/1993 - Paper - French -
    Learn More
    €61.00

  • ISO 9524:1993 (R2017)

    Machine tools -- Front faces of spindle holders for machining centres -- Functional dimensions
    9/1/1993 - Paper - English -
    Learn More
    €61.00

  • JIS B 6340:1992 (R2017)

    Machining centers - Dimensions of spindle noses
    2/1/1992 - PDF - Japanese -
    Learn More
    €25.00

  • NF F01-014 (11/1974) (R2009)

    Railway transport equipment. Type A and C machining centres for axles.
    11/1/1974 - Paper - French -
    Learn More
    €22.83

99 Item(s)

Set Ascending Direction
per page

List  Grid