23.100 : Fluid power systems

Items 1 to 200 of 1649 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  • PR NF E48-050-1, PR NF EN ISO 6149-1 (03/2018)

    Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal
    3/26/2018 - Paper - English, French - AFNOR
    Learn More
    €72.38

  • BS EN 13001-3-6:2018

    Cranes. General design. Limit states and proof of competence of machinery. Hydraulic cylinders
    3/9/2018 - Paper - English - BSI
    Learn More
    €271.32

  • PR NF E48-040, PR NF ISO 5597 (03/2018)

    Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
    3/2/2018 - Paper - English, French - AFNOR
    Learn More
    €95.10

  • BS ISO 6162-2:2018

    Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws. Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
    3/2/2018 - Paper - English - BSI
    Learn More
    €193.80

  • DIN EN ISO 6149-1:2018-03

    Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO/DIS 6149-1:2018); German and English version prEN ISO 6149-1:2018
    3/1/2018 - PDF - English, German - DIN
    Learn More
    €68.30

  • DIN 20066:2018-03

    Hydraulic fluid power - Hose assemblies - Dimensions, requirements
    3/1/2018 - PDF - German - DIN
    Learn More
    €96.00

  • ISO 6162-2:2018

    Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
    3/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 6162-2:2018

    Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
    3/1/2018 - Paper - French - ISO
    Learn More
    €123.00

  • ISO/FDIS 6164:2018

    Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80
    3/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO/FDIS 6164:2018

    Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80
    3/1/2018 - Paper - French - ISO
    Learn More
    €92.00

  • PR NF E48-415, PR NF ISO 4411 (02/2018)

    Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics
    2/26/2018 - Paper - English, French - AFNOR
    Learn More
    €78.60

  • NF E49-310-1, NF ISO 5782-1 (02/2018)

    Pneumatic fluid power - Compressed air filters - Part 1 : main characteristics to be included in supplier's literature and product-marking requirements
    2/3/2018 - Paper - French - AFNOR
    Learn More
    €46.12

  • NF E49-310-1, NF ISO 5782-1 (02/2018)

    Pneumatic fluid power - Compressed air filters - Part 1 : main characteristics to be included in supplier's literature and product-marking requirements
    2/3/2018 - Paper - English - AFNOR
    Learn More
    €46.12

  • ISO/DIS 6149-1:2018

    Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal
    2/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 6149-1:2018

    Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal
    2/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO/FDIS 11943:2018

    Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation
    2/1/2018 - Paper - English - ISO
    Learn More
    €144.00

  • ISO/DIS 2942:2018

    Hydraulic fluid power - Filter elements - Verification of fabrication integrity and determination of the first bubble point
    2/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 2942:2018

    Hydraulic fluid power - Filter elements - Verification of fabrication integrity and determination of the first bubble point
    2/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • BS ISO 23297:2017

    Thermoplastic hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification
    1/11/2018 - Paper - English - BSI
    Learn More
    €139.08

  • NF E48-665, NF ISO 12669 (01/2018)

    Hydraulic fluid power - Method for determining the required cleanliness level (RCL) of a system
    1/6/2018 - Paper - French - AFNOR
    Learn More
    €63.38

  • ISO 19973-2 DAM 1:2018

    Pneumatic fluid power - Assessment of component reliability by testing - Part 2: Directional control valves; Amendment 1
    1/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/FDIS 5597:2018

    Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
    1/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO/FDIS 5597:2018

    Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
    1/1/2018 - Paper - French - ISO
    Learn More
    €92.00

  • ISO/FDIS 15552:2018

    Pneumatic fluid power - Cylinders with detachable mountings, 1000 kPa (10 bar) series, bores from 32 mm to 320 mm - Basic, mounting and accessories dimensions
    1/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO/FDIS 15552:2018

    Pneumatic fluid power - Cylinders with detachable mountings, 1000 kPa (10 bar) series, bores from 32 mm to 320 mm - Basic, mounting and accessories dimensions
    1/1/2018 - Paper - French - ISO
    Learn More
    €92.00

  • DIN ISO 6020-2:2018-01

    Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2: Compact series (ISO 6020-2:2015)
    1/1/2018 - PDF - German - DIN
    Learn More
    €89.00

  • DIN ISO 6020-2:2018-01

    Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2: Compact series (ISO 6020-2:2015)
    1/1/2018 - PDF - English - DIN
    Learn More
    €111.40

  • NF E48-402, NF ISO 7789 (12/2017)

    Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
    12/29/2017 - Paper - French - AFNOR
    Learn More
    €83.18

  • NF E48-402, NF ISO 7789 (12/2017)

    Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
    12/29/2017 - Paper - English - AFNOR
    Learn More
    €83.18

  • NF E49-320-1, NF ISO 6301-1 (12/2017)

    Pneumatic fluid power - Compressed-air lubricators - Part 1 : Main characteristics to be included in supplier's literature and product-marking requirements
    12/22/2017 - Paper - French - AFNOR
    Learn More
    €40.29

  • NF E49-320-1, NF ISO 6301-1 (12/2017)

    Pneumatic fluid power - Compressed-air lubricators - Part 1 : Main characteristics to be included in supplier's literature and product-marking requirements
    12/22/2017 - Paper - English - AFNOR
    Learn More
    €40.29

  • SAE J 343:2017-12-20

    Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
    12/20/2017 - PDF - English - SAE
    Learn More
    €66.30

  • PR NF E49-055, PR NF ISO 14743 (12/2017)

    Pneumatic fluid power - Push-in connectors for thermoplastic tubes
    12/19/2017 - Paper - English, French - AFNOR
    Learn More
    €112.59

  • UNE-EN ISO 6149-4:2017

    Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
    12/13/2017 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • DIN ISO 8132:2017-12

    Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series (ISO 8132:2014)
    12/1/2017 - PDF - German - DIN
    Learn More
    €75.40

  • DIN ISO 8132:2017-12

    Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series (ISO 8132:2014)
    12/1/2017 - PDF - English - DIN
    Learn More
    €94.40

  • DIN EN ISO 6149-4:2017-12

    Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017); German version EN ISO 6149-4:2017
    12/1/2017 - PDF - German - DIN
    Learn More
    €82.60

  • DIN ISO 15171-2:2017-12

    Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 x 2 end for connection under pressure (ISO 15171-2:2016)
    12/1/2017 - PDF - German - DIN
    Learn More
    €61.70

  • DIN EN ISO 6149-4:2017-12

    Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017); German version EN ISO 6149-4:2017
    12/1/2017 - PDF - English - DIN
    Learn More
    €103.10

  • DIN ISO 15171-2:2017-12

    Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 x 2 end for connection under pressure (ISO 15171-2:2016)
    12/1/2017 - PDF - English - DIN
    Learn More
    €77.20

  • ISO/DIS 4411:2017

    Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics
    12/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 4411:2017

    Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics
    12/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • SAE J 747:2017-11-27

    Control Valve Test Procedure
    11/27/2017 - PDF - English - SAE
    Learn More
    €66.30

  • NF E48-677, NF ISO 3968 (11/2017)

    Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow
    11/25/2017 - Paper - French - AFNOR
    Learn More
    €63.38

  • NF E48-677, NF ISO 3968 (11/2017)

    Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow
    11/25/2017 - Paper - English - AFNOR
    Learn More
    €63.38

  • PD ISO/TS 11686:2017

    Connectors for fluid power and general use. Assembly instructions for connectors with adjustable stud ends and O-ring sealing
    11/20/2017 - Paper - English - BSI
    Learn More
    €139.08

  • BS ISO 5782-1:2017

    Pneumatic fluid power. Compressed air filters. Main characteristics to be included in supplier's literature and product-marking requirements
    11/9/2017 - Paper - English - BSI
    Learn More
    €139.08

  • FD E48-350 (11/2017)

    Hydraulic fluid power - Pumps, motors and integral transmissions - Recommendations for starting, servicing and maintenance
    11/8/2017 - Paper - French - AFNOR
    Learn More
    €50.74

  • DIN ISO 8133:2017-11

    Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2014)
    11/1/2017 - PDF - German - DIN
    Learn More
    €82.60

  • DIN ISO 8133:2017-11

    Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2014)
    11/1/2017 - PDF - English - DIN
    Learn More
    €103.10

  • ISO/DIS 14743:2017

    Pneumatic fluid power - Push-in connectors for thermoplastic tubes
    11/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 14743:2017

    Pneumatic fluid power - Push-in connectors for thermoplastic tubes
    11/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 23297:2017

    Thermoplastic hoses and hose assemblies - Wire or synthetic yarn reinforced single-pressure types for hydraulic applications - Specification
    11/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • DIN ISO 7368:2017-11

    Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities (ISO 7368:2016); Text in German and English
    11/1/2017 - PDF - English, German - DIN
    Learn More
    €114.10

  • ISO 5782-1:2017

    Pneumatic fluid power - Compressed air filters - Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
    11/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 5782-1:2017

    Pneumatic fluid power - Compressed air filters - Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
    11/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • UNE-EN 14359:2017

    Gas-loaded accumulators for fluid power applications
    10/25/2017 - PDF - Spanish - AENOR
    Learn More
    €110.00

  • BS ISO 18237:2017

    Hydraulic fluid power. Method for evaluating water separation performance of dehydrators
    10/24/2017 - Paper - English - BSI
    Learn More
    €193.80

  • BS ISO 6301-1:2017

    Pneumatic fluid power. Compressed-air lubricators. Main characteristics to be included in supplier's literature and product-marking requirements
    10/24/2017 - Paper - English - BSI
    Learn More
    €139.08

  • JIS B 8349-1:2017

    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1: Method for determining source flow ripple and source impedance of pumps
    10/20/2017 - PDF - Japanese - JSA
    Learn More
    €41.86

  • BS ISO 12669:2017

    Hydraulic fluid power. Method for determining the required cleanliness level (RCL) of a system
    10/20/2017 - Paper - English - BSI
    Learn More
    €193.80

  • SAE J 517:2017-10-18

    Hydraulic Hose
    10/18/2017 - PDF - English - SAE
    Learn More
    €66.30

  • PR NF E48-380, PR NF ISO 4409 (10/2017)

    Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
    10/13/2017 - Paper - English, French - AFNOR
    Learn More
    €105.05

  • BS EN ISO 6149-4:2017

    Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Dimensions, design, test methods and requirements for external hex and internal hex port plugs
    10/5/2017 - Paper - English - BSI
    Learn More
    €139.08

  • ISO/DIS 18582-2:2017

    Fluid power - Specifications of reference dictionary - Part 2: Classes' and properties' definitions for pneumatics
    10/1/2017 - Paper - English - ISO
    Learn More
    €123.00

  • ISO/TS 11686:2017

    Connectors for fluid power and general use - Assembly instructions for connectors with adjustable stud ends and O-ring sealing
    10/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 12669:2017

    Hydraulic fluid power - Method for determining the required cleanliness level (RCL) of a system
    10/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 12669:2017

    Hydraulic fluid power - Method for determining the required cleanliness level (RCL) of a system
    10/1/2017 - Paper - French - ISO
    Learn More
    €92.00

  • ISO 18237:2017

    Hydraulic fluid power - Method for evaluating water separation performance of dehydrators
    10/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 18237:2017

    Hydraulic fluid power - Method for evaluating water separation performance of dehydrators
    10/1/2017 - Paper - French - ISO
    Learn More
    €92.00

  • JIS B 8356-1:2017

    Hydraulic fluid power - Filters - Evaluation of filter performance - Part 1: Filter elements - Procedure for verifying performance characteristics
    9/20/2017 - PDF - Japanese - JSA
    Learn More
    €25.00

  • BS ISO 3968:2017

    Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow
    9/19/2017 - Paper - English - BSI
    Learn More
    €193.80

  • BS ISO 18869:2017

    Hydraulic fluid power. Test methods for couplings actuated with or without tools
    9/18/2017 - Paper - English - BSI
    Learn More
    €255.36

  • BS ISO 1436:2017

    Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification
    9/18/2017 - Paper - English - BSI
    Learn More
    €139.08

  • BS ISO 4079:2017

    Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification
    9/18/2017 - Paper - English - BSI
    Learn More
    €139.08

  • BS ISO 4406:2017

    Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles
    9/18/2017 - Paper - English - BSI
    Learn More
    €116.28

  • NF E48-050-4, NF EN ISO 6149-4 (09/2017)

    Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4 : dimensions, design, test methods and requirements for external hex and internal hex port plugs
    9/13/2017 - Paper - French - AFNOR
    Learn More
    €50.74

  • NF E48-050-4, NF EN ISO 6149-4 (09/2017)

    Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4 : dimensions, design, test methods and requirements for external hex and internal hex port plugs
    9/13/2017 - Paper - English - AFNOR
    Learn More
    €50.74

  • ISO 11237:2017

    Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
    9/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • DIN EN 14359:2017-09

    Gas-loaded accumulators for fluid power applications; German version EN 14359:2017
    9/1/2017 - PDF - German - DIN
    Learn More
    €191.40

  • ISO 6301-1:2017

    Pneumatic fluid power - Compressed-air lubricators - Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
    9/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 6301-1:2017

    Pneumatic fluid power - Compressed-air lubricators - Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
    9/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • DIN EN 14359:2017-09

    Gas-loaded accumulators for fluid power applications; German version EN 14359:2017
    9/1/2017 - PDF - English - DIN
    Learn More
    €239.20

  • NF E48-083, NF ISO 6605 (08/2017)

    Hydraulic fluid power - Test methods for hoses and hose assemblies
    8/19/2017 - Paper - French - AFNOR
    Learn More
    €50.74

  • NF E48-083, NF ISO 6605 (08/2017)

    Hydraulic fluid power - Test methods for hoses and hose assemblies
    8/19/2017 - Paper - English - AFNOR
    Learn More
    €50.74

  • BS ISO 20401:2017

    Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
    8/9/2017 - Paper - English - BSI
    Learn More
    €116.28

  • NF E48-150, NF EN 14359 (08/2017)

    Gas-loaded accumulators for fluid power applications
    8/5/2017 - Paper - French - AFNOR
    Learn More
    €129.53

  • NF E48-150, NF EN 14359 (08/2017)

    Gas-loaded accumulators for fluid power applications
    8/5/2017 - Paper - English - AFNOR
    Learn More
    €129.53

  • PR NF E48-030, PR NF ISO 6099 (08/2017)

    Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types
    8/4/2017 - Paper - English, French - AFNOR
    Learn More
    €144.21

  • PD ISO/TR 16194:2017

    Pneumatic fluid power. Assessment of component reliability by accelerated life testing. General guidelines and procedures
    8/2/2017 - Paper - English - BSI
    Learn More
    €271.32

  • PR NF E49-360, PR NF ISO 20145 (08/2017)

    Pneumatic fluid power - Test methods for measuring acoustic emission pressure levels of exhaust silencers
    8/2/2017 - Paper - English, French - AFNOR
    Learn More
    €95.10

  • ISO/DIS 4409:2017

    Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
    8/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 4409:2017

    Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
    8/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 6149-4:2017

    Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
    8/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 6149-4:2017

    Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
    8/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 4406:2017

    Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
    8/1/2017 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 3601-3 DAM 1:2017

    Fluid power systems - O-rings - Part 3: Quality acceptance criteria; Amendment 1
    8/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 16589-1 DAM 1:2017

    Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 1: Nominal dimensions and tolerances; Amendment 1
    8/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • BS ISO 6605:2017

    Hydraulic fluid power. Test methods for hoses and hose assemblies
    7/31/2017 - Paper - English - BSI
    Learn More
    €139.08

  • PR NF E48-661-4, PR NF ISO 21018-4 (07/2017)

    Hydraulic fluid power - Monitoring the level of particulate contamination in the fluid - Part 4 : Use of the light extinction technique
    7/28/2017 - Paper - English, French - AFNOR
    Learn More
    €72.38

  • PR NF E49-035, PR NF ISO 8139 (07/2017)

    Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes
    7/19/2017 - Paper - English, French - AFNOR
    Learn More
    €63.03

  • PR NF E49-036, PR NF ISO 8140 (07/2017)

    Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end clevises
    7/19/2017 - Paper - English, French - AFNOR
    Learn More
    €63.03

  • SAE J 1754/1:2017-07-14

    Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 1: Procurement Document
    7/14/2017 - PDF - English - SAE
    Learn More
    €66.30

  • ISO 18869:2017

    Hydraulic fluid power - Test methods for couplings actuated with or without tools
    7/1/2017 - Paper - English - ISO
    Learn More
    €165.00

  • DIN EN ISO 6803:2017-07

    Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017); German version EN ISO 6803:2017
    7/1/2017 - PDF - German - DIN
    Learn More
    €61.70

  • ISO 1436:2017

    Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
    7/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 3862:2017

    Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification
    7/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 4079:2017

    Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification
    7/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • DIN EN ISO 6803:2017-07

    Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017); German version EN ISO 6803:2017
    7/1/2017 - PDF - English - DIN
    Learn More
    €77.20

  • ISO 20401:2017

    Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
    7/1/2017 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 3968:2017

    Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow
    7/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 3968:2017

    Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow
    7/1/2017 - Paper - French - ISO
    Learn More
    €92.00

  • NF E44-602 (06/2017)

    Dynamic agitators - Hydrodynamic performance evaluation
    6/30/2017 - Paper - French - AFNOR
    Learn More
    €63.38

  • SAE J 1335:2017-06-19

    Hydraulic Cylinder No-Load Friction Test
    6/19/2017 - PDF - English - SAE
    Learn More
    €66.30

  • BS EN 14359:2017

    Gas-loaded accumulators for fluid power applications
    6/9/2017 - Paper - English - BSI
    Learn More
    €289.56

  • ISO/DIS 8139:2017

    Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes
    6/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 8139:2017

    Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes
    6/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • ISO/DIS 8140:2017

    Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises
    6/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 8140:2017

    Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises
    6/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • ISO/DIS 6099:2017

    Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types
    6/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 6099:2017

    Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types
    6/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • DIN EN ISO 6802:2017-06

    Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO/DIS 6802.2:2017); German and English version prEN ISO 6802:2017
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €61.70

  • DIN EN ISO 3949:2017-06

    Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO/DIS 3949.2:2017); German and English version prEN ISO 3949:2017
    6/1/2017 - PDF - English, German - DIN
    Learn More
    €82.60

  • ISO 6605:2017

    Hydraulic fluid power - Test methods for hoses and hose assemblies
    6/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 6605:2017

    Hydraulic fluid power - Test methods for hoses and hose assemblies
    6/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • ISO/DIS 21018-4:2017

    Hydraulic fluid power - Monitoring the level of particulate contamination in the fluid - Part 4: Use of the light extinction technique
    6/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 21018-4:2017

    Hydraulic fluid power - Monitoring the level of particulate contamination in the fluid - Part 4: Use of the light extinction technique
    6/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • ISO/DIS 20145:2017

    Pneumatic fluid power - Test methods for measuring acoustic emission pressure levels of exhaust silencers
    6/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 20145:2017

    Pneumatic fluid power - Test methods for measuring acoustic emission pressure levels of exhaust silencers
    6/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • JIS B 8395:2017

    Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances
    5/22/2017 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 8674:2017

    Pneumatic fluid power - Connections - Ports and stud ends
    5/22/2017 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 8659-2:2017

    Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-port directional flow-control valves
    5/22/2017 - PDF - Japanese - JSA
    Learn More
    €41.86

  • NF E48-079-1/A1, NF ISO 12151-1/A1 (05/2017)

    Connections for hydraulic fluid power and general use - Hose fittings - Part 1 : hose fittings with ISO 8434-3 O-ring face seal ends - Amendment 1
    5/12/2017 - Paper - French - AFNOR
    Learn More
    €21.69

  • NF E48-079-1/A1, NF ISO 12151-1/A1 (05/2017)

    Connections for hydraulic fluid power and general use - Hose fittings - Part 1 : hose fittings with ISO 8434-3 O-ring face seal ends - Amendment 1
    5/12/2017 - Paper - English - AFNOR
    Learn More
    €21.69

  • ISO/DIS 3949:2017

    Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
    5/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 3949:2017

    Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
    5/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • ASTM D8072-17

    Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation
    5/1/2017 - PDF - English - ASTM
    Learn More
    €35.00

  • NF E04-056-3, NF ISO 1219-3 (04/2017)

    Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3 : symbol modules and connected symbols in circuit diagrams
    4/22/2017 - Paper - English, French - AFNOR
    Learn More
    €72.58

  • NF E04-056-3, NF ISO 1219-3 (04/2017)

    Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3 : symbol modules and connected symbols in circuit diagrams
    4/22/2017 - Paper - English - AFNOR
    Learn More
    €72.58

  • SAE J 1298:2017-04-14

    Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic Port Sizes and Locations (Stabilized: Apr 2017)
    4/14/2017 - PDF - English - SAE
    Learn More
    €66.30

  • SAE J 518/2:2017-04-13

    Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 2: 42 MPa (Code 62)
    4/13/2017 - PDF - English - SAE
    Learn More
    €66.30

  • NF E48-065-4, NF ISO 9974-4 (04/2017)

    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4 : dimensions, design, test methods and requirements for external hex and internal hex port plugs
    4/8/2017 - Paper - French - AFNOR
    Learn More
    €50.74

  • NF E48-065-4, NF ISO 9974-4 (04/2017)

    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4 : dimensions, design, test methods and requirements for external hex and internal hex port plugs
    4/8/2017 - Paper - English - AFNOR
    Learn More
    €50.74

  • ISO/TR 16194:2017

    Pneumatic fluid power - Assessment of component reliability by accelerated life testing - General guidelines and procedures
    4/1/2017 - Paper - English - ISO
    Learn More
    €186.00

  • BS EN ISO 6803:2017

    Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
    3/31/2017 - Paper - English - BSI
    Learn More
    €139.08

  • ISO 12151-1 AMD 1:2017

    Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends; Amendment 1
    2/1/2017 - Paper - English - ISO
    Learn More
    €17.00

  • ISO 12151-1 AMD 1:2017

    Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends; Amendment 1
    2/1/2017 - Paper - French - ISO
    Learn More
    €17.00

  • NBN EN ISO 6149-4

    Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
    1/10/2017 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 6149-4

    Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
    1/10/2017 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 6149-4

    Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
    1/10/2017 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 14359

    Gas-loaded accumulators for fluid power applications
    1/5/2017 - PDF - French - NBN
    Learn More
    €135.00

  • NBN EN 14359

    Gas-loaded accumulators for fluid power applications
    1/5/2017 - PDF - German - NBN
    Learn More
    €135.00

  • NBN EN 14359

    Gas-loaded accumulators for fluid power applications
    1/5/2017 - PDF - English - NBN
    Learn More
    €135.00

  • SAE J 1405:2017-01-04

    Optional Test Procedures for Hydraulic Hose Assemblies
    1/4/2017 - PDF - English - SAE
    Learn More
    €66.30

  • NBN EN ISO 6803

    Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
    1/4/2017 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 6803

    Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
    1/4/2017 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 6803

    Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
    1/4/2017 - PDF - English - NBN
    Learn More
    €45.00

  • BS ISO 9974-4:2016

    Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing. Dimensions, design, test methods and requirements for external hex and internal hex port plugs
    12/31/2016 - Paper - English - BSI
    Learn More
    €139.08

  • NF E48-661-4, NF ISO 21018-4 (12/2016)

    Hydraulic fluid power - Monitoring the level of particulate contamination in the fluid - Part 4 : use of the light extinction technique
    12/30/2016 - Paper - French - AFNOR
    Learn More
    €50.74

  • NF E48-661-4, NF ISO 21018-4 (12/2016)

    Hydraulic fluid power - Monitoring the level of particulate contamination in the fluid - Part 4 : use of the light extinction technique
    12/30/2016 - Paper - English - AFNOR
    Learn More
    €50.74

  • ASTM F3226/F3226M-16e1

    Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
    12/15/2016 - PDF - English - ASTM
    Learn More
    €39.00

  • ISO 9974-4:2016

    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
    12/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 9974-4:2016

    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
    12/1/2016 - Paper - French - ISO
    Learn More
    €61.00

  • BS ISO 21018-4:2016

    Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid. Use of the light extinction technique
    11/30/2016 - Paper - English - BSI
    Learn More
    €139.08

  • NF E48-697, NF ISO 12829 (11/2016)

    Hydraulic spin-on filters with finite lives - Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
    11/19/2016 - Paper - French - AFNOR
    Learn More
    €50.74

  • NF E48-697, NF ISO 12829 (11/2016)

    Hydraulic spin-on filters with finite lives - Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
    11/19/2016 - Paper - English - AFNOR
    Learn More
    €50.74

  • NF E48-550, NF ISO 3601-2 (11/2016)

    Fluid power systems - O-rings - Part 2 : housing dimensions for general applications
    11/12/2016 - Paper - French - AFNOR
    Learn More
    €99.65

  • NF E48-550, NF ISO 3601-2 (11/2016)

    Fluid power systems - O-rings - Part 2 : housing dimensions for general applications
    11/12/2016 - Paper - English - AFNOR
    Learn More
    €99.65

  • BS ISO 11171:2016

    Hydraulic fluid power. Calibration of automatic particle counters for liquids
    10/31/2016 - Paper - English - BSI
    Learn More
    €271.32

  • PR NF E48-064-1, PR NF EN ISO 8434-1 (10/2016)

    Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors
    10/30/2016 - Paper - French - AFNOR
    Learn More
    €105.05

  • NF E48-430, NF ISO 7368 (10/2016)

    Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities
    10/28/2016 - Paper - French - AFNOR
    Learn More
    €83.18

  • NF E48-430, NF ISO 7368 (10/2016)

    Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities
    10/28/2016 - Paper - English - AFNOR
    Learn More
    €83.18

  • NF E48-900-1, NF ISO 18582-1 (10/2016)

    Fluid power - Specification of reference dictionary - Part 1 : general overview on organization and structure
    10/21/2016 - Paper - French - AFNOR
    Learn More
    €50.74

  • NF E48-900-1, NF ISO 18582-1 (10/2016)

    Fluid power - Specification of reference dictionary - Part 1 : general overview on organization and structure
    10/21/2016 - Paper - English - AFNOR
    Learn More
    €50.74

  • NF E48-423, NF ISO 5781 (10/2016)

    Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces
    10/14/2016 - Paper - French - AFNOR
    Learn More
    €72.58

  • NF E48-423, NF ISO 5781 (10/2016)

    Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces
    10/14/2016 - Paper - English - AFNOR
    Learn More
    €72.58

  • PR NF E48-055-2, PR NF ISO 6162-2 (10/2016)

    Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
    10/10/2016 - Paper - French - AFNOR
    Learn More
    €72.38

  • SAE J 744:2016-10-05

    Hydraulic Pump and Motor Mounting and Drive Dimensions
    10/5/2016 - PDF - English - SAE
    Learn More
    €66.30

  • DIN EN ISO 8434-1:2016-10

    Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO/DIS 8434-1:2016); German and English version prEN ISO 8434-1:2016
    10/1/2016 - PDF - English, German - DIN
    Learn More
    €147.20

  • VG 95925-2:2016-10

    Hose assemblies - Part 2: For fluid power service - Part numbers; Text in German and English
    10/1/2016 - PDF - English, German - DIN
    Learn More
    €103.10

  • VG 95925-4:2016-10

    Hose assemblies - Part 4: Part numbers, for replacement only; Text in German and English
    10/1/2016 - PDF - English, German - DIN
    Learn More
    €89.20

  • ISO 11171:2016

    Hydraulic fluid power - Calibration of automatic particle counters for liquids
    10/1/2016 - Paper - English - ISO
    Learn More
    €186.00

  • ISO 11171:2016

    Hydraulic fluid power - Calibration of automatic particle counters for liquids
    10/1/2016 - Paper - French - ISO
    Learn More
    €186.00

  • ISO 21018-4:2016

    Hydraulic fluid power - Monitoring the level of particulate contamination in the fluid - Part 4: Use of the light extinction technique
    10/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 21018-4:2016

    Hydraulic fluid power - Monitoring the level of particulate contamination in the fluid - Part 4: Use of the light extinction technique
    10/1/2016 - Paper - French - ISO
    Learn More
    €61.00

  • BS ISO 1219-3:2016

    Fluid power systems and components. Graphical symbols and circuit diagrams. Symbol modules and connected symbols in circuit diagrams
    9/30/2016 - Paper - English - BSI
    Learn More
    €225.72

  • PD ISO/TS 11672:2016

    Connectors for fluid power and general use. Designation and nomenclature
    9/30/2016 - Paper - English - BSI
    Learn More
    €193.80

  • BS ISO 7368:2016

    Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities
    9/30/2016 - Paper - English - BSI
    Learn More
    €255.36

  • PR NF E48-664, PR NF ISO 18237 (09/2016)

    Hydraulic fluid power - Method for evaluating water separation performance of dehydrators
    9/21/2016 - Paper - English, French - AFNOR
    Learn More
    €86.46

  • SAE J 1926/2:2016-09-09

    Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends
    9/9/2016 - PDF - English - SAE
    Learn More
    €66.30

  • SAE J 1926/3:2016-09-09

    Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 3: Light-Duty (L-Series) Stud Ends
    9/9/2016 - PDF - English - SAE
    Learn More
    €66.30

  • SAE J 1926/1:2016-09-09

    Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing
    9/9/2016 - PDF - English - SAE
    Learn More
    €66.30

  • ISO 1219-3:2016

    Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3: Symbol modules and connected symbols in circuit diagrams
    9/1/2016 - Paper - English, French - ISO
    Learn More
    €123.00

  • DIN EN 856:2016-09

    Ruber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification; German version EN 856:2015
    9/1/2016 - PDF - German - DIN
    Learn More
    €82.60

  • DIN EN 857:2016-09

    Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:2015
    9/1/2016 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 3852-21:2016-09

    Stud ends and ports of fittings, valves and plug screws - Part 21: Dimensions for pipe thread according to DIN EN ISO 228-1 and O-ring sealing
    9/1/2016 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 3861:2016-09

    Non-soldering compression fittings - Compression rings - Design
    9/1/2016 - PDF - German - DIN
    Learn More
    €47.60

  • ISO/TS 11672:2016

    Connectors for fluid power and general use - Designation and nomenclature
    9/1/2016 - Paper - English - ISO
    Learn More
    €92.00

  • ISO/DIS 8434-1:2016

    Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors [revision of ISO 8434-1:2007]
    9/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 8434-1:2016

    Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors [revision of ISO 8434-1:2007]
    9/1/2016 - Paper - French - ISO
    Learn More
    €61.00

Items 1 to 200 of 1649 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
To top