23.040 : Pipeline components and pipelines

Items 1 to 200 of 8094 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 41
  • PR NF M88-761, PR NF EN 16125 (05/2018)

    LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
    5/14/2018 - Paper - English, French - AFNOR
    Learn More
    €121.66

  • PR NF E39-015, PR NF EN 14419 (04/2018)

    District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems
    4/12/2018 - Paper - French - AFNOR
    Learn More
    €78.60

  • SAE J 2666:2018-04-10

    Hose Gauge Evaluation Procedure (Stabilized: Apr 2018)
    4/10/2018 - PDF - English - SAE
    Learn More
    €66.30

  • SAE J 2551/1:2018-04-09

    Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication
    4/9/2018 - PDF - English - SAE
    Learn More
    €66.30

  • SAE J 2551/2:2018-04-09

    Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements
    4/9/2018 - PDF - English - SAE
    Learn More
    €66.30

  • SAE J 2551/3:2018-04-09

    Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement
    4/9/2018 - PDF - English - SAE
    Learn More
    €66.30

  • DIN EN 16125:2018-04

    LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase; German and English version prEN 16125:2018
    4/1/2018 - PDF - English, German - DIN
    Learn More
    €114.10

  • DIN EN 1401-1:2018-04

    Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the System; German and English version prEN 1401-1:2018
    4/1/2018 - PDF - English, German - DIN
    Learn More
    €114.10

  • ISO 21225-1:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction
    4/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 21225-1:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction
    4/1/2018 - Paper - French - ISO
    Learn More
    €92.00

  • ISO 21225-2:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling
    4/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 21225-2:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling
    4/1/2018 - Paper - French - ISO
    Learn More
    €123.00

  • DIN EN ISO 8028:2018-04

    Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017); German version EN ISO 8028:2018
    4/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • ISO/TS 17165-2:2018

    Hydraulic fluid power - Hose assemblies - Part 2: Practices for hydraulic hose assemblies
    4/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • DIN 3535-6:2018-04

    Gaskets for gas supply - Part 6: Gasket material based on fibres, graphite or polytetrafluoroethylene (PTFE) for gas valves, gas appliances and gas mains
    4/1/2018 - PDF - German - DIN
    Learn More
    €54.80

  • PR NF T54-903, PR NF EN ISO 13257 (03/2018)

    Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
    3/31/2018 - Paper - English, French - AFNOR
    Learn More
    €78.60

  • PR NF A91-314, PR NF EN ISO 11177 (03/2018)

    Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing
    3/20/2018 - Paper - English, French - AFNOR
    Learn More
    €72.38

  • PR NF E39-017-2, PR NF EN 15698-2 (03/2018)

    District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
    3/19/2018 - Paper - French - AFNOR
    Learn More
    €63.03

  • PR NF E39-017-1, PR NF EN 15698-1 (03/2018)

    District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
    3/19/2018 - Paper - French - AFNOR
    Learn More
    €63.03

  • SAE J 530:2018-03-18

    Automotive Pipe Fittings
    3/18/2018 - PDF - English - SAE
    Learn More
    €66.30

  • PR NF P16-364-7, PR NF EN ISO 11296-7 (03/2018)

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
    3/17/2018 - Paper - English, French - AFNOR
    Learn More
    €95.10

  • PR NF T54-966-1, PR NF EN ISO 11299-1 (03/2018)

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General
    3/16/2018 - Paper - English, French - AFNOR
    Learn More
    €95.10

  • PR NF T54-966-3, PR NF EN ISO 11299-3 (03/2018)

    Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
    3/16/2018 - Paper - English, French - AFNOR
    Learn More
    €95.10

  • BS EN ISO 11297-2:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Lining with continuous pipes
    3/16/2018 - Paper - English - BSI
    Learn More
    €139.08

  • PR NF T54-966-2, PR NF EN ISO 11299-2 (03/2018)

    Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes
    3/16/2018 - Paper - English, French - AFNOR
    Learn More
    €78.60

  • PD CEN/TR 17179:2018

    Thermoplastics piping and ducting systems. Rainwater infiltration and storage attenuation systems. Practices for underground installation
    3/9/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS EN 752:2017

    Drain and sewer systems outside buildings. Sewer system management
    3/9/2018 - Paper - English - BSI
    Learn More
    €335.16

  • BS EN ISO 10619-1:2018

    Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
    3/9/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS EN ISO 28017:2018

    Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification
    3/9/2018 - Paper - English - BSI
    Learn More
    €193.80

  • BS EN ISO 11298-2:2018

    Plastics piping systems for renovation of underground water supply networks. Lining with continuous pipes
    3/6/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS EN ISO 6412-2:2018

    Technical product documentation. Simplified representation of pipelines. Isometric projection
    3/5/2018 - Paper - English - BSI
    Learn More
    €139.08

  • PR NF E39-013, PR NF EN 488 (03/2018)

    District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene
    3/5/2018 - Paper - French - AFNOR
    Learn More
    €78.60

  • PR NF E39-012, PR NF EN 448 (03/2018)

    District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
    3/5/2018 - Paper - French - AFNOR
    Learn More
    €86.46

  • DIN EN 1451-1:2018-03

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1451-1:2017
    3/1/2018 - PDF - German - DIN
    Learn More
    €125.30

  • DIN EN 1852-1:2018-03

    Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1852-1:2018
    3/1/2018 - PDF - German - DIN
    Learn More
    €108.80

  • DIN EN 15698-2:2018-03

    District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene; German and English version prEN 15698-2:2018
    3/1/2018 - PDF - English, German - DIN
    Learn More
    €75.40

  • DIN EN 14419:2018-03

    District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems; German and English version prEN 14419:2018
    3/1/2018 - PDF - English, German - DIN
    Learn More
    €89.00

  • DIN EN 15698-1:2018-03

    District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene; German and English version prEN 15698-1:2018
    3/1/2018 - PDF - English, German - DIN
    Learn More
    €75.40

  • DIN EN 448:2018-03

    District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene; German and English version prEN 448:2018
    3/1/2018 - PDF - English, German - DIN
    Learn More
    €108.80

  • ASTM A369/A369M-18

    Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
    3/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM A369/A369M-18 + Redline

    Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
    3/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM A213/A213M-18

    Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
    3/1/2018 - PDF - English - ASTM
    Learn More
    €44.00

  • ASTM A213/A213M-18 + Redline

    Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
    3/1/2018 - PDF - English - ASTM
    Learn More
    €53.00

  • ASTM A790/A790M-18

    Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
    3/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM A790/A790M-18 + Redline

    Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
    3/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM A335/A335M-18

    Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
    3/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM A335/A335M-18 + Redline

    Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
    3/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM B88M-18

    Standard Specification for Seamless Copper Water Tube (Metric)
    3/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM B88M-18 + Redline

    Standard Specification for Seamless Copper Water Tube (Metric)
    3/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM B280-18

    Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
    3/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM B280-18 + Redline

    Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
    3/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • DIN 16961-1:2018-03

    Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Classification and dimensions
    3/1/2018 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 16961-2:2018-03

    Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications
    3/1/2018 - PDF - German - DIN
    Learn More
    €103.00

  • DIN EN ISO 13257:2018-03

    Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO/DIS 13257:2018); German and English version prEN ISO 13257:2018
    3/1/2018 - PDF - English, German - DIN
    Learn More
    €75.40

  • BS EN ISO 11297-4:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Lining with cured-in-place pipes
    3/1/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS EN ISO 11296-2:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with continuous pipes
    3/1/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS EN ISO 11296-4:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with cured-in-place pipes
    3/1/2018 - Paper - English - BSI
    Learn More
    €255.36

  • ISO 11297-1:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General
    3/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 11297-1:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General
    3/1/2018 - Paper - French - ISO
    Learn More
    €92.00

  • ISO 11298-1:2018

    Plastics piping systems for renovation of underground water supply networks - Part 1: General
    3/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 11298-1:2018

    Plastics piping systems for renovation of underground water supply networks - Part 1: General
    3/1/2018 - Paper - French - ISO
    Learn More
    €92.00

  • ISO 15874-5 FDAM 1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system; Amendment 1
    3/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15874-5 FDAM 1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system; Amendment 1
    3/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 15874-2 FDAM 1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes; Amendment 1
    3/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15874-2 FDAM 1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes; Amendment 1
    3/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • ASTM A500/A500M-18

    Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
    3/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM A500/A500M-18 + Redline

    Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
    3/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM A403/A403M-18

    Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
    3/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM A403/A403M-18 + Redline

    Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
    3/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM A234/A234M-18

    Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
    3/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM A234/A234M-18 + Redline

    Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
    3/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM A182/A182M-18

    Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
    3/1/2018 - PDF - English - ASTM
    Learn More
    €44.00

  • ASTM A182/A182M-18 + Redline

    Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
    3/1/2018 - PDF - English - ASTM
    Learn More
    €53.00

  • ISO 15874-3 FDAM 1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings; Amendment 1
    3/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15874-3 FDAM 1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings; Amendment 1
    3/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • DIN 3901:2018-03

    Non-soldering compression fittings with cutting ring - Double ended stud ends with parallel thread for stud ends type A
    3/1/2018 - PDF - German - DIN
    Learn More
    €33.60

  • DIN EN ISO 1825:2018-03

    Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017); German version EN ISO 1825:2017
    3/1/2018 - PDF - German - DIN
    Learn More
    €108.80

  • DIN EN ISO 1825:2018-03

    Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017); German version EN ISO 1825:2017
    3/1/2018 - PDF - English - DIN
    Learn More
    €136.20

  • BS EN ISO 10619-2:2018

    Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
    2/23/2018 - Paper - English - BSI
    Learn More
    €139.08

  • BS EN ISO 10960:2018

    Rubber and plastics hoses. Assessment of ozone resistance under dynamic conditions
    2/23/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS EN ISO 6412-3:2018

    Technical product documentation. Simplified representation of pipelines. Terminal features of ventilation and drainage systems
    2/21/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS EN ISO 6412-1:2018

    Technical product documentation. Simplified representation of pipelines. General rules and orthogonal representation
    2/20/2018 - Paper - English - BSI
    Learn More
    €139.08

  • JIS G 3460:2018

    Steel pipes for low temperature service
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS G 3458:2018

    Alloy steel pipes
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 1217:2018

    Bolting for use with pipe flanges
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €46.02

  • JIS B 2404:2018

    Dimensions of gaskets for use with pipe flanges
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €41.86

  • NF E04-118-1, NF EN ISO 6412-1 (02/2018)

    Technical product documentation - Simplified representation of pipelines - Part 1 : general rules and orthogonal representation
    2/7/2018 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF E04-118-2, NF EN ISO 6412-2 (02/2018)

    Technical product documentation - Simplified representation of pipelines - Part 2 : isometric projection
    2/7/2018 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF E04-118-3, NF EN ISO 6412-3 (02/2018)

    Technical product documentation - Simplified representation of pipelines - Part 3 : terminal features of ventilation and drainage systems
    2/7/2018 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E04-118-1, NF EN ISO 6412-1 (02/2018)

    Technical product documentation - Simplified representation of pipelines - Part 1 : general rules and orthogonal representation
    2/7/2018 - Paper - English - AFNOR
    Learn More
    €53.41

  • NF E04-118-2, NF EN ISO 6412-2 (02/2018)

    Technical product documentation - Simplified representation of pipelines - Part 2 : isometric projection
    2/7/2018 - Paper - English - AFNOR
    Learn More
    €66.72

  • NF E04-118-3, NF EN ISO 6412-3 (02/2018)

    Technical product documentation - Simplified representation of pipelines - Part 3 : terminal features of ventilation and drainage systems
    2/7/2018 - Paper - English - AFNOR
    Learn More
    €42.41

  • BS ISO 11922-1:2018

    Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Metric series
    2/7/2018 - Paper - English - BSI
    Learn More
    €139.08

  • XP T54-990 (02/2018)

    Polyethylene (PE) pipes and fittings - Determination of the resistance to crack initiation and slow crack growth on notched cylindrical bars under constant load (NCBT)
    2/7/2018 - Paper - French - AFNOR
    Learn More
    €66.72

  • DIN 2403:2018-02

    Identification of pipelines according to the fluid conveyed
    2/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • DIN EN ISO 14692-1:2018-02

    Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017); English version EN ISO 14692-1:2017
    2/1/2018 - PDF - English - DIN
    Learn More
    €191.40

  • DIN EN ISO 14692-2:2018-02

    Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017); English version EN ISO 14692-2:2017
    2/1/2018 - PDF - English - DIN
    Learn More
    €180.80

  • DIN EN ISO 14692-3:2018-02

    Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017); English version EN ISO 14692-3:2017
    2/1/2018 - PDF - English - DIN
    Learn More
    €119.60

  • DIN EN ISO 14692-4:2018-02

    Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017); English version EN ISO 14692-4:2017
    2/1/2018 - PDF - English - DIN
    Learn More
    €175.40

  • PR NF E86-700-1/A1, PR NF EN 13480-1/A1 (02/2018)

    Metallic industrial piping - Part 1 : General
    2/1/2018 - Paper - English, French - AFNOR
    Learn More
    €43.95

  • ASTM C1277-18

    Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
    2/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM C1277-18 + Redline

    Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
    2/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • API RP 578:2018

    Guidelines for a Material Verification Program (MVP) for New and Existing Assets
    2/1/2018 - PDF sécurisé - English - API
    Learn More
    €178.50

  • DIN EN ISO 11173:2018-02

    Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994); German version EN ISO 11173:2017
    2/1/2018 - PDF - German - DIN
    Learn More
    €61.70

  • DIN EN ISO 11299-1:2018-02

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO/DIS 11299-1:2018); German and English version prEN ISO 11299-1:2018
    2/1/2018 - PDF - English, German - DIN
    Learn More
    €89.00

  • DIN EN ISO 11299-2:2018-02

    Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO/DIS 11299-2:2018); German and English version prEN ISO 11299-2:2018
    2/1/2018 - PDF - English, German - DIN
    Learn More
    €75.40

  • DIN EN ISO 11299-3:2018-02

    Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO/DIS 11299-3:2018); German and English version prEN ISO 11299-3:2018
    2/1/2018 - PDF - English, German - DIN
    Learn More
    €89.00

  • DIN EN ISO 11296-7:2018-02

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO/DIS 11296-7:2017); German and English version prEN ISO 11296-7:2017
    2/1/2018 - PDF - English, German - DIN
    Learn More
    €89.00

  • DIN EN ISO 13257:2018-02

    Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2010); German version EN ISO 13257:2017
    2/1/2018 - PDF - German - DIN
    Learn More
    €61.70

  • DIN EN ISO 13257:2018-02

    Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2010); German version EN ISO 13257:2017
    2/1/2018 - PDF - English - DIN
    Learn More
    €77.20

  • ISO 11297-4:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes
    2/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 11297-4:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes
    2/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 11296-4:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
    2/1/2018 - Paper - English - ISO
    Learn More
    €165.00

  • ISO 11296-4:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
    2/1/2018 - Paper - French - ISO
    Learn More
    €165.00

  • ISO 11297-2:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes
    2/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 11297-2:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes
    2/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 11296-2:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes
    2/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 11296-2:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes
    2/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 11298-2:2018

    Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes
    2/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 11298-2:2018

    Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes
    2/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • DIN EN ISO 11173:2018-02

    Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994); German version EN ISO 11173:2017
    2/1/2018 - PDF - English - DIN
    Learn More
    €77.20

  • ASTM F1473-18

    Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
    2/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM F1473-18 + Redline

    Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
    2/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2788/F2788M-18

    Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
    2/1/2018 - PDF - English - ASTM
    Learn More
    €44.00

  • ASTM F2788/F2788M-18 + Redline

    Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
    2/1/2018 - PDF - English - ASTM
    Learn More
    €53.00

  • ISO/FDIS 10467:2018

    Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
    2/1/2018 - Paper - English - ISO
    Learn More
    €186.00

  • ISO 11296-1:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
    2/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 11296-1:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
    2/1/2018 - Paper - French - ISO
    Learn More
    €92.00

  • ASTM C1675-18

    Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
    2/1/2018 - PDF - English - ASTM
    Learn More
    €35.00

  • ASTM C1675-18 + Redline

    Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
    2/1/2018 - PDF - English - ASTM
    Learn More
    €42.00

  • ASTM C1540-18

    Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
    2/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM C1540-18 + Redline

    Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
    2/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM C1173-18

    Standard Specification for Flexible Transition Couplings for Underground Piping Systems
    2/1/2018 - PDF - English - ASTM
    Learn More
    €35.00

  • ASTM C1173-18 + Redline

    Standard Specification for Flexible Transition Couplings for Underground Piping Systems
    2/1/2018 - PDF - English - ASTM
    Learn More
    €42.00

  • DIN EN 1762:2018-02

    Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification; German and English version prEN 1762:2018
    2/1/2018 - PDF - English, German - DIN
    Learn More
    €82.60

  • CEN/TS 14632

    Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity
    1/29/2018 - PDF - French - NBN
    Learn More
    €77.00

  • CEN/TR 1295-2

    Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
    1/29/2018 - PDF - French - NBN
    Learn More
    €145.00

  • CEN/TS 14632

    Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity
    1/29/2018 - PDF - German - NBN
    Learn More
    €77.00

  • CEN/TS 14632

    Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity
    1/29/2018 - PDF - English - NBN
    Learn More
    €77.00

  • CEN/TR 1295-2

    Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
    1/29/2018 - PDF - English - NBN
    Learn More
    €145.00

  • CEN/TR 15729

    Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles
    1/29/2018 - PDF - French - NBN
    Learn More
    €45.00

  • CEN/TR 15729

    Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles
    1/29/2018 - PDF - German - NBN
    Learn More
    €45.00

  • CEN/TR 15729

    Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles
    1/29/2018 - PDF - English - NBN
    Learn More
    €45.00

  • BS EN ISO 2507-1:2017

    Thermoplastics pipes and fittings. Vicat softening temperature. General test method
    1/29/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS ISO 4065:2018

    Thermoplastics pipes. Universal wall thickness table
    1/29/2018 - Paper - English - BSI
    Learn More
    €139.08

  • NF T54-097, NF EN ISO 3127 (01/2018)

    Thermoplastics pipes -Determination of resistance to external blows - Round-the-clock method
    1/27/2018 - Paper - French - AFNOR
    Learn More
    €50.74

  • NF T54-910, NF EN ISO 11173 (01/2018)

    Thermoplastics pipes - Determination of resistance to external blows - Staircase method
    1/27/2018 - Paper - French - AFNOR
    Learn More
    €40.29

  • NF T54-910, NF EN ISO 11173 (01/2018)

    Thermoplastics pipes - Determination of resistance to external blows - Staircase method
    1/27/2018 - Paper - English - AFNOR
    Learn More
    €40.29

  • NF T54-097, NF EN ISO 3127 (01/2018)

    Thermoplastics pipes -Determination of resistance to external blows - Round-the-clock method
    1/27/2018 - Paper - English - AFNOR
    Learn More
    €50.74

  • BS EN ISO 2507-2:2017

    Thermoplastics pipes and fittings. Vicat softening temperature. Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
    1/26/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS ISO 161-1:2018

    Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series
    1/26/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS EN ISO 13257:2017

    Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
    1/19/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS EN ISO 13262:2017

    Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
    1/19/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS EN ISO 13264:2017

    Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings
    1/18/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS EN ISO 13263:2017

    Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
    1/17/2018 - Paper - English - BSI
    Learn More
    €116.28

  • BS EN ISO 11295:2017

    Classification and information on design and applications of plastics piping systems used for renovation and replacement
    1/12/2018 - Paper - English - BSI
    Learn More
    €271.32

  • BS ISO 10804:2018

    Restrained joint systems for ductile iron pipelines. Design rules and type testing
    1/11/2018 - Paper - English - BSI
    Learn More
    €116.28

  • PR NF A49-170-2, PR NF EN 10253-2 (01/2018)

    Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
    1/7/2018 - Paper - English, French - AFNOR
    Learn More
    €198.83

  • PR NF A49-170-4, PR NF EN 10253-4 (01/2018)

    Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
    1/7/2018 - Paper - English, French - AFNOR
    Learn More
    €219.84

  • UNE-EN 16820:2018

    Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
    1/3/2018 - PDF - Spanish - AENOR
    Learn More
    €57.00

  • UNE-EN 16821:2018

    Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses
    1/3/2018 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • ISO 10804:2018

    Restrained joint systems for ductile iron pipelines - Design rules and type testing
    1/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • NFPA 274:2018

    Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation
    1/1/2018 - PDF sécurisé - English - NFPA
    Learn More
    €35.70

  • DIN CEN/TS 15223 DIN SPEC 16823:2018-01

    Plastics piping systems - Validated design parameters of buried thermoplastics piping systems; German version CEN/TS 15223:2017
    1/1/2018 - PDF - German - DIN
    Learn More
    €87.10

  • ANSI/NFPA 274:2018

    Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation
    1/1/2018 - PDF sécurisé - English - NFPA
    Learn More
    €35.70

  • DVGW G 473:2018-01

    Methods for detection, valuation, treatment and avoidance of dents on high pressure pipelines
    1/1/2018 - PDF - German - DVGW
    Learn More
    €45.51

  • UNE-CEN/TS 15223:2017

    Plastics piping systems - Validated design parameters of buried thermoplastics piping systems (Endorsed by Asociación Española de Normalización in January of 2018.)
    1/1/2018 - PDF - English - AENOR
    Learn More
    €83.00

  • DIN EN ISO 13260:2018-01

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010 + Amd.1:2017); German version EN ISO 13260:2011 + A1:2017
    1/1/2018 - PDF - German - DIN
    Learn More
    €75.40

  • ASTM Volume 01.01 - 2018 Print

    Steel–Piping, Tubing, Fittings
    1/1/2018 - Paper - English - ASTM
    Learn More
    €274.00

  • ASTM Volume 01.01 - 2018 Multi-User - Single-Site Online

    Steel–Piping, Tubing, Fittings
    1/1/2018 - internet - English - ASTM
    Learn More
    €734.00

  • ASTM Volume 01.01 - 2018 Single Registered User Online

    Steel–Piping, Tubing, Fittings
    1/1/2018 - internet - English - ASTM
    Learn More
    €367.00

  • DIN 2413:2018-01

    Seamless steel tubes for oil- and water-hydraulic systems - Calculation rules for pipes and elbows for dynamic loads
    1/1/2018 - PDF - German - DIN
    Learn More
    €103.00

  • DIN EN 15655-1:2018-01

    Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings; German and English version prEN 15655-1:2017
    1/1/2018 - PDF - English, German - DIN
    Learn More
    €96.00

  • AWWA C 205:2018

    Cement-Mortar Protective Lining and Coating for Steel Water Pipe - 4 In. (100 mm) and Larger - Shop Applied
    1/1/2018 - PDF sécurisé - English - AWWA
    Learn More
    €85.85

  • ISO/DIS 11299-1:2018

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General
    1/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 11299-1:2018

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General
    1/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO/DIS 11299-3:2018

    Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
    1/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 11299-3:2018

    Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
    1/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO/DIS 11299-2:2018

    Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes
    1/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 11299-2:2018

    Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes
    1/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ASTM D2517-18

    Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
    1/1/2018 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM D2517-18 + Redline

    Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
    1/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ISO/DIS 11296-7:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
    1/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 11296-7:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
    1/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO/FDIS 13259:2018

    Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints
    1/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/FDIS 13259:2018

    Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints
    1/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO/DIS 13257:2018

    Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
    1/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO/DIS 13257:2018

    Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
    1/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 4065:2018

    Thermoplastics pipes - Universal wall thickness table
    1/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 161-1:2018

    Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Part 1: Metric series
    1/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 11922-1:2018

    Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series
    1/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 10508 DAM 1:2018

    Plastics piping systems for hot and cold water installations - Guidance for classification and design; Amendment 1
    1/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 10508 DAM 1:2018

    Plastics piping systems for hot and cold water installations - Guidance for classification and design; Amendment 1
    1/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • DIN EN ISO 9852:2018-01

    Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007); German version EN ISO 9852:2017
    1/1/2018 - PDF - German - DIN
    Learn More
    €61.70

  • DIN EN ISO 9852:2018-01

    Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007); German version EN ISO 9852:2017
    1/1/2018 - PDF - English - DIN
    Learn More
    €77.20

  • DIN EN ISO 3127:2018-01

    Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994); German version EN ISO 3127:2017
    1/1/2018 - PDF - German - DIN
    Learn More
    €75.40

  • DIN EN ISO 3127:2018-01

    Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994); German version EN ISO 3127:2017
    1/1/2018 - PDF - English - DIN
    Learn More
    €94.40

  • DIN EN ISO 2507-2:2018-01

    Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995); German version EN ISO 2507-2:2017
    1/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • DIN EN ISO 2507-2:2018-01

    Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995); German version EN ISO 2507-2:2017
    1/1/2018 - PDF - English - DIN
    Learn More
    €59.60

  • DIN EN ISO 2507-3:2018-01

    Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995); German version EN ISO 2507-3:2017
    1/1/2018 - PDF - German - DIN
    Learn More
    €47.60

Items 1 to 200 of 8094 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 41
To top