Closure for annual leave, no order will be honored August 1 to August 19, 2019 included.

Call +33 (1) 40 02 03 05
Type de carte de crédit

21.140 : Seals, glands

197 Item(s)

Set Ascending Direction
per page

List  Grid 

  • ASTM C1619-19

    Standard Specification for Elastomeric Seals for Joining Concrete Structures
    2/1/2019 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM C1619-19 + Redline

    Standard Specification for Elastomeric Seals for Joining Concrete Structures
    2/1/2019 - PDF - English - ASTM
    Learn More
    €45.00

  • PR NF ISO 3601-1/A1, T47-501/A1PR (12/2018)

    Fluid power systems - O-rings - Part 1 : inside diameters, cross - sections, tolerances and designation codes - Amendment 1
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €63.03

  • DIN 83419:2018-02

    Elastomer gaskets for covers
    2/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • ASTM C1440-17

    Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
    11/15/2017 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM C1440-17 + Redline

    Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
    11/15/2017 - PDF - English - ASTM
    Learn More
    €45.00

  • DIN 443:2017-11

    Sealing push-in caps
    11/1/2017 - PDF - German - DIN
    Learn More
    €33.60

  • BS ISO 4708:2017

    Composition cork. Gasket material. Test methods
    10/26/2017 - PDF - English - BSI
    Learn More
    €144.90

  • BS ISO 4709:2017

    Composition cork. Gasket material. Classification system, requirements, sampling, packaging and marking
    10/13/2017 - PDF - English - BSI
    Learn More
    €121.90

  • PR NF EN 549, D36-205PR (07/2017)

    Rubber materials for seals and diaphragms for gas appliances and gas equipment - Matériaux à base de caoutchouc pour joints d'étanchéité et membranes destinés aux appareils à gaz et appareillages pour le gaz
    7/1/2017 - Paper - French - AFNOR
    Learn More
    €95.10

  • ASTM G206-17

    Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
    6/1/2017 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM G206-17 + Redline

    Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
    6/1/2017 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F868-17

    Standard Classification for Laminated Composite Gasket Materials
    5/1/2017 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F868-17 + Redline

    Standard Classification for Laminated Composite Gasket Materials
    5/1/2017 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM F1315-17

    Standard Test Method for Density of a Sheet Gasket Material
    2/1/2017 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F1315-17 + Redline

    Standard Test Method for Density of a Sheet Gasket Material
    2/1/2017 - PDF - English - ASTM
    Learn More
    €45.00

  • SAE AS 5728B:2016-10-13

    O-RING MOLDED FROM AMS7268 (SILICONE) MATERIAL
    10/13/2016 - PDF - English - SAE
    Learn More
    €73.00

  • ASTM D3667-16

    Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
    7/1/2016 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D3667-16 + Redline

    Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
    7/1/2016 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM C1635-16

    Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
    6/1/2016 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM C1635-16 + Redline

    Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
    6/1/2016 - PDF - English - ASTM
    Learn More
    €45.00

  • SAE J 2028:2016-01-15

    Front-Wheel-Drive Constant Velocity Joint Boot Seals (Stabilized: Jan 2016)
    1/15/2016 - PDF - English - SAE
    Learn More
    €73.00

  • UNE-EN 16752:2015

    Centrifugal pumps - Test procedure for seal packings
    12/16/2015 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • DIN EN 16752:2015-11

    Centrifugal pumps - Test procedure for seal packings; German version EN 16752:2015
    11/1/2015 - PDF - German - DIN
    Learn More
    €75.40

  • DIN EN 16752:2015-11

    Centrifugal pumps - Test procedure for seal packings; German version EN 16752:2015
    11/1/2015 - PDF - English - DIN
    Learn More
    €94.40

  • NBN EN 16752:2015

    Centrifugal pumps - Test procedure for seal packings
    10/23/2015 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 16752:2015

    Centrifugal pumps - Test procedure for seal packings
    10/23/2015 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 16752:2015

    Centrifugal pumps - Test procedure for seal packings
    10/23/2015 - PDF - French - NBN
    Learn More
    €45.00

  • BS EN 16752:2015

    Centrifugal pumps. Test procedure for seal packings
    9/30/2015 - PDF - English - BSI
    Learn More
    €144.90

  • SAE J 1236:2015-09-02

    Cast Iron Sealing Rings (Metric) (Stabilized: Sep 2015)
    9/2/2015 - PDF - English - SAE
    Learn More
    €73.00

  • ASTM D1414-15

    Standard Test Methods for Rubber O-Rings
    7/1/2015 - PDF - English - ASTM
    Learn More
    €49.00

  • ASTM D1414-15 + Redline

    Standard Test Methods for Rubber O-Rings
    7/1/2015 - PDF - English - ASTM
    Learn More
    €59.00

  • ASTM D3771-15 + Redline

    Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
    6/1/2015 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D3903-15 + Redline

    Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
    6/1/2015 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM D3771-15

    Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
    6/1/2015 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM D3903-15

    Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
    6/1/2015 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F3149-15

    Standard Practice for Determining the Maintenance Factor (m) and Yield Factor (y) Loading Constants Applicable to Gasket Materials and Designs
    6/1/2015 - PDF - English - ASTM
    Learn More
    €43.00

  • JIS B 0116:2015

    Glossary of terms for packings and gaskets
    3/20/2015 - PDF - Japanese - JSA
    Learn More
    €50.18

  • DIN 87155:2015-01

    Grey cast-iron coarse filters - Sealing rings
    1/1/2015 - PDF - German - DIN
    Learn More
    €33.60

  • ASTM F36-15 + Redline

    Standard Test Method for Compressibility and Recovery of Gasket Materials
    1/1/2015 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM F36-15

    Standard Test Method for Compressibility and Recovery of Gasket Materials
    1/1/2015 - PDF - English - ASTM
    Learn More
    €38.00

  • BS 4518:1982+A2:2014


    9/30/2014 - PDF - English - BSI
    Learn More
    €236.90

  • VG 85057:2014-06

    Stuffing boxes; Text in German and English
    6/1/2014 - PDF - English, German - DIN
    Learn More
    €47.60

  • API STD 682:2014

    Pumps - Shaft Sealing Systems for Centrifugal and Rotary Pumps
    5/1/2014 - PDF sécurisé - English - API
    Learn More
    €255.00

  • API STD 682 Datasheets:2014

    Pumps - Shaft Sealing Systems for Centrifugal and Rotary Pumps; Datasheets
    5/1/2014 - Excel file - English - API
    Learn More
    €59.00

  • DIN 28040:2013-09

    Flange joints for process vessels - Flat gaskets
    9/1/2013 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 28040:2013-09

    Flange joints for process vessels - Flat gaskets
    9/1/2013 - PDF - English - DIN
    Learn More
    €51.00

  • SAE J 1800:2013-07-09

    Method for Evaluating the Paintable Characteristics of Automotive Sealers (Stabilized: Jul 2013)
    7/9/2013 - PDF - English - SAE
    Learn More
    €73.00

  • ASTM F118-13

    Standard Definitions of Terms Relating to Gaskets
    7/1/2013 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F118-13 + Redline

    Standard Definitions of Terms Relating to Gaskets
    7/1/2013 - PDF - English - ASTM
    Learn More
    €45.00

  • ASTM F148-13 + Redline

    Standard Test Method for Binder Durability of Cork Composition Gasket Materials
    7/1/2013 - PDF - English - ASTM
    Learn More
    €45.00

  • JIS B 2402-2:2013 (R2018)

    Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 2: Vocabulary
    6/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 2402-1:2013 (R2018)

    Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 1: Nominal dimensions and tolerances
    6/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 2402-5:2013 (R2018)

    Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 5: Identification of visual imperfections
    6/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • GOST 32600:2013

    Pumps. Shaft sealing systems for centrifugal and rotary pumps. General technical requirements and control methods
    1/1/2013 - PDF - English - GOST
    Learn More
    €768.00

  • UNE 53614:2012

    Elastomers. Methods of testing rubber O-Rings
    10/24/2012 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • SAE J 1610:2012-10-24

    Test Method for Evaluating the Sealing Capability of Hose Connections with a PVT Test Facility (Stabilized: Oct 2012)
    10/24/2012 - PDF - English - SAE
    Learn More
    €73.00

  • ASTM F146-12 + Redline

    Standard Test Methods for Fluid Resistance of Gasket Materials
    8/1/2012 - PDF - English - ASTM
    Learn More
    €52.00

  • NF ISO 3601-1, T47-501 (05/2012)

    Fluid power systems - O-rings - Part 1 : inside diameters, cross-sections, tolerances and designation codes - Transmissions hydrauliques et pneumatiques
    5/1/2012 - Paper - French - AFNOR
    Learn More
    €87.56

  • NACE SP 0491:2012

    Worksheet for the Selection of Oilfield Nonmetallic Seal Systems
    1/1/2012 - PDF sécurisé - English - NACE
    Learn More
    €68.31

  • ASTM C1619-11 + Redline

    Standard Specification for Elastomeric Seals for Joining Concrete Structures
    11/1/2011 - PDF - English - ASTM
    Learn More
    €43.00

  • DIN 83106:2011-08

    Profile gaskets for heavy hinged doors on ships and for hatches
    8/1/2011 - PDF - German - DIN
    Learn More
    €47.60

  • ASTM F19-11(2016)

    Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
    6/1/2011 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F19-11 + Redline

    Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
    6/1/2011 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM F104-11 + Redline

    Standard Classification System for Nonmetallic Gasket Materials
    4/1/2011 - PDF - English - ASTM
    Learn More
    €59.00

  • ASTM F2837-11(2018)

    Standard Test Method for Hot Compression Properties of Gasket Materials
    4/1/2011 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM F2837-11 + Redline

    Standard Test Method for Hot Compression Properties of Gasket Materials
    4/1/2011 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F104-11

    Standard Classification System for Nonmetallic Gasket Materials
    4/1/2011 - PDF - English - ASTM
    Learn More
    €49.00

  • DIN 470:2011-03

    Sealing washers
    3/1/2011 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 470:2011-03

    Sealing washers
    3/1/2011 - PDF - English - DIN
    Learn More
    €42.00

  • UNE 53616:2011

    Elastomers. Specification and test methods for elastomer seals used in lighting. Characteristics and test methods.
    1/19/2011 - PDF - Spanish - AENOR
    Learn More
    €23.00

  • DIN 442:2011-01

    Sealing expanding caps
    1/1/2011 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 442:2011-01

    Sealing expanding caps
    1/1/2011 - PDF - English - DIN
    Learn More
    €42.00

  • ASTM A1045-10(2017)

    Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
    12/15/2010 - PDF - English - ASTM
    Learn More
    €43.00

  • VG 95967:2010-10

    Oil and fuel restistant gaskets - Technical Specification; Text in German and English
    10/1/2010 - PDF - English, German - DIN
    Learn More
    €96.00

  • VG 95967 Beiblatt 1:2010-10

    Oil and fuel resistant gaskets - Material; Text in German and English
    10/1/2010 - PDF - English, German - DIN
    Learn More
    €47.60

  • UNE 104481-3-2:2010

    Test methods for membranes for waterproofing. Part: 3-2: Test for watertightness of waterproofing sheet joints using the pressure air method
    5/26/2010 - PDF - Spanish - AENOR
    Learn More
    €20.00

  • BS ISO 6194-3:2009 (R2015)

    Rotary shaft lip-type seals incorporating elastomeric sealing elements. Storage, handling and installation
    4/30/2010 - PDF - English - BSI
    Learn More
    €144.90

  • ASTM E2342/E2342M-10(2015)e1

    Standard Test Method for Durability Testing of Duct Sealants
    3/1/2010 - PDF - English - ASTM
    Learn More
    €43.00

  • VG 96940-100:2009-04

    Electrical conductive gaskets - Part 100: Gaskets for connectors with mounting flange, selection from MIL-DTL-83528/4E; Text in German and English
    4/1/2009 - PDF - English, German - DIN
    Learn More
    €54.80

  • ASTM C1461-08(2017)

    Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use
    10/1/2008 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F2716-08(2014)

    Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam
    5/1/2008 - PDF - English - ASTM
    Learn More
    €43.00

  • DIN 86076:2007-06

    Gasket sheets for ship building - Requirements and tests
    6/1/2007 - PDF - German - DIN
    Learn More
    €47.60

  • JIS B 2405/AMENDMENT 1:2006 (R2015)

    Mechanical seals - General requirements (Amendment 1)
    7/20/2006 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN 28138-1:2006-06

    Rotating mechanical seals for agitator shafts - Part 1: Carbon or stainless steel - Operating data, assembly dimensions
    6/1/2006 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 28138-2:2006-06

    Rotating mechanical seals for agitator shafts - Part 2: Steel, glass-lined - Operating data, assembly dimensions
    6/1/2006 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 28138-3:2006-06

    Rotating mechanical seals for agitator shafts - Part 3: Connections for barries fluids, cooling, control and mounting and designation system for rotating mechanical seals
    6/1/2006 - PDF - German - DIN
    Learn More
    €75.40

  • ASTM C1166-06(2016)

    Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
    5/1/2006 - PDF - English - ASTM
    Learn More
    €38.00

  • JIS K 6820/AMENDMENT 1:2006 (R2015)

    Fluid sealants (Amendment 1)
    3/25/2006 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN EN ISO 21049:2005-11

    Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004); English version EN ISO 21049:2004
    11/1/2005 - PDF - English - DIN
    Learn More
    €282.00

  • ASTM F2378-05(2016)

    Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
    4/1/2005 - PDF - English - ASTM
    Learn More
    €43.00

  • JIS D 2612:2005 (R2014)

    Automotive parts - Reservoir seals for hydraulic brake master cylinders using a non-petroleum base hydraulic brake fluid
    3/20/2005 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS D 2605:2005 (R2014)

    Automotive parts - Rubber cups for hydraulic braking cylinders using a non-petroleum base hydraulic brake fluid
    3/20/2005 - PDF - Japanese - JSA
    Learn More
    €50.18

  • BS 6121-1:2005


    2/21/2005 - PDF - English - BSI
    Learn More
    €121.90

  • BS 6121-5:2005


    2/21/2005 - PDF - English - BSI
    Learn More
    €144.90

  • NBN EN ISO 21049:2005

    Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
    1/26/2005 - PDF - English - NBN
    Learn More
    €187.00

  • NBN EN ISO 21049:2005

    Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
    1/26/2005 - PDF - French - NBN
    Learn More
    €187.00

  • ASTM F256-05(2015)

    Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium
    1/1/2005 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM D1330-04(2015)e1

    Standard Specification for Rubber Sheet Gaskets
    12/1/2004 - PDF - English - ASTM
    Learn More
    €38.00

  • JIS B 2405:2003

    Mechanical seals - General requirements
    11/20/2003 - PDF - Japanese - JSA
    Learn More
    €41.86

  • ASTM F806-99a(2017)

    Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
    10/1/2003 - PDF - English - ASTM
    Learn More
    €38.00

  • VG 96940-3:2003-08

    Electrical conductive gaskets - Part 3: Advices for selection and installation
    8/1/2003 - PDF - English, German - DIN
    Learn More
    €68.30

  • VG 96940-5:2003-08

    Electrical conductive gaskets - Part 5: Preferred types, dimensions, characteristics
    8/1/2003 - PDF - German - DIN
    Learn More
    €47.60

  • ASTM F336-02(2016)

    Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service
    10/10/2002 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F433-02(2014)e1

    Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
    10/10/2002 - PDF - English - ASTM
    Learn More
    €43.00

  • NF ISO 4708, B57-057 (09/2002)

    Composition cork - Gasket material - Test methods - Aggloméré composé de liège
    9/1/2002 - Paper - French - AFNOR
    Learn More
    €53.41

  • ASTM F1087-02(2016)

    Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
    3/10/2002 - PDF - English - ASTM
    Learn More
    €38.00

  • UNE-EN 12756:2002

    MECHANICAL SEALS. PRINCIPAL DIMENSIONS, DESIGNATION AND MATERIAL CODES.
    2/20/2002 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • SAE J 1918:2002-01-25

    Method for the Determination of Expansion and Water Absorption in Automotive Sealers
    1/25/2002 - PDF - English - SAE
    Learn More
    €73.00

  • ISA-76.00.02:2002

    Modular Component Interfaces for Surface-Mount Fluid Distribution Components - Part 1: Elastomeric Seals
    1/1/2002 - Paper - English - ISA
    Learn More
    €40.00

  • ASTM D2527-83(2017)

    Standard Specification for Rubber Seals—Splice Strength
    5/10/2001 - PDF - English - ASTM
    Learn More
    €38.00

  • NF EN 12756, E44-170 (04/2001)

    Mechanical seals - Principal dimensions, designation and material codes
    4/1/2001 - Paper - French - AFNOR
    Learn More
    €76.40

  • DIN EN 12756:2001-03

    Mechanical seals - Principal dimensions, designation and material codes; German version EN 12756:2000
    3/1/2001 - PDF - German - DIN
    Learn More
    €47.60

  • DIN EN 12756:2001-03

    Mechanical seals - Principal dimensions, designation and material codes; German version EN 12756:2000
    3/1/2001 - PDF - English - DIN
    Learn More
    €59.60

  • BS EN 12756:2001


    2/15/2001 - PDF - English - BSI
    Learn More
    €121.90

  • NBN EN 12756:2001

    Mechanical seals - Principal dimensions, designation and material codes
    2/6/2001 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 12756:2001

    Mechanical seals - Principal dimensions, designation and material codes
    2/6/2001 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 12756:2001

    Mechanical seals - Principal dimensions, designation and material codes
    2/6/2001 - PDF - French - NBN
    Learn More
    €45.00

  • ASTM D3832-79(2017)

    Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
    1/1/2001 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F112-00(2019)

    Standard Test Method for Sealability of Enveloped Gaskets
    10/10/2000 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F79-69(2015)

    Standard Specification for Type 101 Sealing Glass
    1/1/2000 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F144-80(2015)

    Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
    1/1/2000 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM F363-99(2018)

    Standard Test Method for Corrosion Testing of Gaskets
    10/10/1999 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F495-99a(2019)

    Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
    7/10/1999 - PDF - English - ASTM
    Learn More
    €38.00

  • BS EN 12690:1999


    6/15/1999 - PDF - English - BSI
    Learn More
    €121.90

  • ASTM F1276-99(2016)

    Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials
    3/10/1999 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM F1466-99(2015)

    Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
    1/10/1999 - PDF - English - ASTM
    Learn More
    €43.00

  • ASTM F140-98(2013)

    Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
    10/10/1998 - PDF - English - ASTM
    Learn More
    €43.00

  • UNE-EN 751-1:1997

    SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 1: ANAEROBIC JOINTING COMPOUNDS.
    9/30/1997 - PDF - English - AENOR
    Learn More
    €58.80

  • UNE-EN 751-1:1997

    SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 1: ANAEROBIC JOINTING COMPOUNDS.
    9/30/1997 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN 751-2:1997

    SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 2: NON-HARDENING JOINTING COMPOUNDS.
    9/30/1997 - PDF - English - AENOR
    Learn More
    €60.00

  • UNE-EN 751-2:1997

    SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 2: NON-HARDENING JOINTING COMPOUNDS.
    9/30/1997 - PDF - Spanish - AENOR
    Learn More
    €50.00

  • UNE-EN 751-3:1997

    SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 3: UNSINTERED PTFE TAPES.
    9/30/1997 - PDF - English - AENOR
    Learn More
    €58.80

  • UNE-EN 751-3:1997

    SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 3: UNSINTERED PTFE TAPES.
    9/30/1997 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • NBN EN 751-3:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
    2/12/1997 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN 751-3:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
    2/12/1997 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN 751-3:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
    2/12/1997 - PDF - French - NBN
    Learn More
    €56.00

  • NBN EN 751-3:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
    2/12/1997 - PDF - Dutch - NBN
    Learn More
    €56.00

  • NBN EN 751-1:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
    2/12/1997 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 751-1:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
    2/12/1997 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 751-1:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
    2/12/1997 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN 751-1:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
    2/12/1997 - PDF - Dutch - NBN
    Learn More
    €45.00

  • NBN EN 751-2:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
    2/12/1997 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN 751-2:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
    2/12/1997 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN 751-2:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
    2/12/1997 - PDF - French - NBN
    Learn More
    €56.00

  • NBN EN 751-2:1997

    Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
    2/12/1997 - PDF - Dutch - NBN
    Learn More
    €56.00

  • UNE-EN 549:1996

    RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT.
    3/22/1996 - PDF - English - AENOR
    Learn More
    €64.80

  • UNE-EN 549:1996

    RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT.
    3/22/1996 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • SAE J 1864:1996-03-01

    METHOD FOR EVALUATING MATERIAL SEPARATION IN AUTOMOTIVE SEALERS UNDER PRESSURE IN STATIC CONDITIONS
    3/1/1996 - PDF - English - SAE
    Learn More
    €73.00

  • UNE-EN ISO 9222-1:1996

    TECHNICAL DRAWINGS. SEALS FOR DYNAMIC APPLICATION. PART 1: GENERAL SIMPLIFIED REPRESENTATION. (ISO 9222-1:1989).
    2/22/1996 - PDF - Spanish - AENOR
    Learn More
    €35.00

  • UNE-EN ISO 9222-2:1996

    TECHNICAL DRAWINGS. SEALS OF DYNAMIC APPLICATION. PART 2: DETAILED SIMPLIFIED REPRESENTATION. (ISO 9222-2:1989).
    2/22/1996 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • JIS K 6820:1995 (R2002)

    Fluid sealants
    12/1/1995 - PDF - Japanese - JSA
    Learn More
    €25.00

  • BS EN ISO 9222-1:1995

    Technical drawings. Seals for dynamic application. General simplified representation
    10/15/1995 - PDF - English - BSI
    Learn More
    €121.90

  • BS EN ISO 9222-2:1995

    Technical drawings. Seals for dynamic application. Detailed simplified representation
    9/15/1995 - PDF - English - BSI
    Learn More
    €144.90

  • SAE J 1524:1995-08-01

    METHOD OF VISCOSITY TEST FOR AUTOMOTIVE TYPE ADHESIVES, SEALERS, AND DEADENERS
    8/1/1995 - PDF - English - SAE
    Learn More
    €73.00

  • NF EN ISO 9222-1, E04-130-1 (07/1995)

    Technical drawings. Seals for dynamic application. Part 1 : general simplified representation. - Dessins techniques
    7/1/1995 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF EN ISO 9222-2, E04-130-2 (07/1995)

    Technical drawings. Seals of dynamic application. Part 2 : detailed simplified representation. - Dessins techniques
    7/1/1995 - Paper - French - AFNOR
    Learn More
    €76.40

  • NBN EN ISO 9222-1:1995

    Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989)
    5/1/1995 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 9222-1:1995

    Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989)
    5/1/1995 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 9222-1:1995

    Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989)
    5/1/1995 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 9222-2:1995

    Technical drawings - Seals of dynamic application - Part 2: Detailed simplified representation (ISO 9222-2:1989)
    3/31/1995 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN ISO 9222-2:1995

    Technical drawings - Seals of dynamic application - Part 2: Detailed simplified representation (ISO 9222-2:1989)
    3/31/1995 - PDF - English - NBN
    Learn More
    €56.00

  • NF EN 549, D36-205 (03/1995)

    Rubber materials for seals and diaphragms for gas appliances and gas equipment
    3/1/1995 - Paper - French - AFNOR
    Learn More
    €87.56

  • ASTM F105-72(2015)

    Standard Specification for Type 58 Borosilicate Sealing Glass
    1/1/1995 - PDF - English - ASTM
    Learn More
    €38.00

  • DIN 28192:1994-10

    Elastic pass partition gaskets for tubular heat exchangers
    10/1/1994 - PDF - German - DIN
    Learn More
    €40.80

  • NF R93-920, R93-920 (12/1993) (R2013)

    Raod vehicles. Circular sealing rings. - Véhicules routiers
    12/1/1993 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF F00-079, F00-079 (05/1992)

    Railway equipment in general. Compact-rubber 'O' rings. - Matériel ferroviaire en général
    5/1/1992 - Paper - French - AFNOR
    Learn More
    €66.72

  • BS EN 291:1992

    Rubber seals. Static seals in domestic appliances for combustible gas up to 200 mbar. Specification for material
    5/1/1992 - PDF - English - BSI
    Learn More
    €121.90

  • DIN 8253-4:1992-03

    Round glasses for watches; mineral glasses; I-gasket, dimensions
    3/1/1992 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 28148:1992-01

    PTFE envelope gaskets for glass lined agitator vessels
    1/1/1992 - PDF - German - DIN
    Learn More
    €33.60

  • BS EN 279:1991

    Specification for homogenous rubber materials for dynamic seals in domestic appliances using combustible gases up to 200 mbar
    11/29/1991 - PDF - English - BSI
    Learn More
    €121.90

  • BS 4371:1991 (R2016)

    Specification for fibrous gland packings
    6/28/1991 - PDF - English - BSI
    Learn More
    €144.90

  • DIN ISO 9222-2:1991-03

    Technical drawings; seals for dynamic application; part 2: detailed simplified representation; identical with ISO 9222-2:1989
    3/1/1991 - PDF - German - DIN
    Learn More
    €61.70

  • DIN ISO 9222-1:1990-12

    Technical drawings; seals for dynamic application; part 1: general simplified representation; identical with ISO 9222-1:1989
    12/1/1990 - PDF - German - DIN
    Learn More
    €33.60

  • BS 6997:1990 (R2016)

    Specification for elastomeric toroidal sealing rings ('O'-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996
    8/31/1990 - PDF - English - BSI
    Learn More
    €121.90

  • NF R94-301, R94-301 (09/1989) (R2014)

    Road vehicles. Threading connection for components including an '0' ring. Dimensional characteristics. - Véhicules routiers
    9/1/1989 - Paper - French - AFNOR
    Learn More
    €30.64

  • SAE J 2025:1989-06-01

    METHOD FOR EVALUATING THE FLOW PROPERTIES OF PUMPABLE SEALERS
    6/1/1989 - PDF - English - SAE
    Learn More
    €73.00

  • BS 5106:1988 (R2017)

    Specification for dimensions of spiral anti-extrusion back-up rings and their housings
    1/31/1989 - PDF - English - BSI
    Learn More
    €144.90

  • SAE J 1969:1988-10-01

    ELECTROCOAT COMPATIBILITIES OF AUTOMOTIVE SEALERS
    10/1/1988 - PDF - English - SAE
    Learn More
    €73.00

  • SAE MA 2010:2018-08-23

    Packing, Preformed - O-Ring Seal Standard Sizes & Size Codes, Metric
    1/1/1988 - PDF - English - SAE
    Learn More
    €73.00

  • UNE 26319-1:1985

    ROAD VEHICLES. O-RINGS OIL RESISTENCE.
    3/15/1985 - PDF - Spanish - AENOR
    Learn More
    €10.00

  • UNE 26319-2:1985

    ROAD VEHICLES. O-RINGS OIL RESISTENCE AT 150ºC.
    3/15/1985 - PDF - Spanish - AENOR
    Learn More
    €10.00

  • UNE 26319-3:1985

    ROAD VEHICLES. O-RINGS OIL RESISTENCE AT 175ºC.
    3/15/1985 - PDF - Spanish - AENOR
    Learn More
    €10.00

  • UNE 26319-4:1985

    ROAD VEHICLES. O-RINGS FUEL RESISTENCE.
    3/15/1985 - PDF - Spanish - AENOR
    Learn More
    €10.00

  • UNE 26319-5:1985

    ROAD VEHICLES. O-RINGS BRAKE FLUIDS RESISTENTE.
    3/15/1985 - PDF - Spanish - AENOR
    Learn More
    €10.00

  • DIN 3771-3:1984-12

    Fluid systems; O-rings; materials, field of application
    12/1/1984 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 3771-3:1984-12

    Fluid systems; O-rings; materials, field of application
    12/1/1984 - PDF - English - DIN
    Learn More
    €42.00

  • UNE 26309:1984

    REDIAL SEALS FOR ROTATING SHAFTS.
    6/15/1984 - PDF - Spanish - AENOR
    Learn More
    €38.00

  • DIN ISO 6547:1983-06

    Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings; dimensions and tolerances
    6/1/1983 - PDF - German - DIN
    Learn More
    €33.60

  • NF R18-230, R18-230 (09/1979) (R2009)

    Rubber strips for fixed windows
    9/1/1979 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E29-584, E29-584 (02/1979)

    Sealing washers.
    2/1/1979 - Paper - French - AFNOR
    Learn More
    €22.83

  • ASTM F204-76(2018)

    Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire
    11/26/1976 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM F145-72(2016)

    Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies
    1/1/1972 - PDF - English - ASTM
    Learn More
    €38.00

  • SAE J 243:1971-10-01

    METHODS OF TESTS FOR AUTOMOTIVE-TYPE SEALERS, ADHESIVES, AND DEADENERS
    10/1/1971 - PDF - English - SAE
    Learn More
    €73.00

  • NF R99-202, R99-202 (09/1966) (R2011)

    Paper and board for joints.
    9/1/1966 - Paper - French - AFNOR
    Learn More
    €30.64

  • DIN 3780:1954-09

    Seals and Packings; Stuffing Box Diameters and Related Packing Widths, Design Sheet
    9/1/1954 - PDF - German - DIN
    Learn More
    €23.80

  • DIN 3780:1954-09

    Seals and Packings; Stuffing Box Diameters and Related Packing Widths, Design Sheet
    9/1/1954 - PDF - English - DIN
    Learn More
    €29.60

197 Item(s)

Set Ascending Direction
per page

List  Grid