Closure for annual leave, no order will be honored August 1 to August 19, 2019 included.

Call +33 (1) 40 02 03 05
Type de carte de crédit

21.120 : Shafts and couplings

Items 1 to 200 of 324 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  • SAE AS 7413A:2019-04-23

    Coupling Assemblies, Quick Disconnect, Automatic Shutoff (Stabilized: Apr 2019)
    4/23/2019 - PDF - English - SAE
    Learn More
    €73.00

  • DIN 5481:2019-04 + Redline

    Serration splines
    4/1/2019 - PDF - German - DIN
    Learn More
    €130.60

  • ISO 21940-1:2019

    Mechanical vibration -- Rotor balancing -- Part 1: Introduction
    2/1/2019 - Paper - English - ISO
    Learn More
    €144.00

  • DIN EN ISO 6413:2018-12

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018); German version EN ISO 6413:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €75.40

  • UNE-EN ISO 6413:2018

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018) (Endorsed by Asociación Española de Normalización in December of 2018.)
    12/1/2018 - PDF - English - AENOR
    Learn More
    €66.00

  • NBN EN ISO 6413:2018

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
    11/27/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 6413:2018

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
    11/27/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 6413:2018

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
    11/27/2018 - PDF - French - NBN
    Learn More
    €45.00

  • BS EN ISO 6413:2018

    Technical product documentation. Representation of splines and serrations
    10/30/2018 - PDF - English - BSI
    Learn More
    €144.90

  • NF EN ISO 6413, E04-119 (10/2018)

    Technical product documentation - Representation of splines and serrations - Dessins techniques - Représentation des cannelures et des dentelures
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €53.41

  • ISO 6413:2018

    Technical product documentation -- Representation of splines and serrations
    9/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 6413:2018

    Technical product documentation -- Representation of splines and serrations
    9/1/2018 - Paper - French - ISO
    Learn More
    €61.00

  • PR NF EN 13001-3-8, E52-013-3-8PR (07/2018)

    Cranes - General design - Part 3-8 : limit states and proof competence of machinery - Shafts - Appareils de levage à charge suspendue - Conception générale - Partie 3-8 : états limites et vérification d'aptitude des mécanismes des éléments de mécanismes - Arbres
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €121.66

  • DIN EN 13001-3-8:2018-06

    Cranes - General design - Part 3-8: Limit states and proof competence of machinery - Shafts; German and English version prEN 13001-3-8:2018
    6/1/2018 - PDF - English, German - DIN
    Learn More
    €163.80

  • 18/30360270 DC


    6/1/2018 - PDF - English - BSI
    Learn More
    €23.00

  • IEC 60744 (2018-05)

    IEC 60744:2018 Nuclear power plants - Instrumentation and control systems important to safety - Safety logic assemblies used in systems performing category A functions: Characteristics and test methods
    5/14/2018 - PDF - English, French - CEI
    Learn More
    €203.00

  • DIN ISO 21940-1:2018-05

    Mechanical vibration - Rotor balancing - Part 1: Introduction (ISO/DIS 21940-1:2018); Text in German and English
    5/1/2018 - PDF - English, German - DIN
    Learn More
    €114.10

  • NF ISO 16084, E66-271 (01/2018)

    Balancing of rotating tools and tool systems - Équillibrage pour outils rotatifs et systèmes d'outillage
    1/1/2018 - Paper - French - AFNOR
    Learn More
    €127.55

  • BS ISO 16084:2017

    Balancing of rotating tools and tool systems
    11/21/2017 - PDF - English - BSI
    Learn More
    €303.60

  • ISO 16084:2017

    Balancing of rotating tools and tool systems
    10/1/2017 - Paper - English - ISO
    Learn More
    €186.00

  • ISO 16084:2017

    Balancing of rotating tools and tool systems
    10/1/2017 - Paper - French - ISO
    Learn More
    €186.00

  • DIN ISO 21940-2:2017-09

    Mechanical vibration - Rotor balancing - Part 2: Vocabulary (ISO 21940-2:2017)
    9/1/2017 - PDF - German - DIN
    Learn More
    €103.00

  • DIN ISO 21940-2:2017-09

    Mechanical vibration - Rotor balancing - Part 2: Vocabulary (ISO 21940-2:2017)
    9/1/2017 - PDF - English - DIN
    Learn More
    €128.80

  • BS ISO 21940-2:2017

    Mechanical vibration. Rotor balancing. Vocabulary
    6/28/2017 - PDF - English - BSI
    Learn More
    €202.40

  • DIN 6799:2017-06

    Retaining washers for shafts
    6/1/2017 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 6799:2017-06

    Retaining washers for shafts
    6/1/2017 - PDF - English - DIN
    Learn More
    €68.50

  • DIN ISO 21940-11:2017-03

    Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour (ISO 21940-11:2016)
    3/1/2017 - PDF - German - DIN
    Learn More
    €103.00

  • DIN ISO 21940-11:2017-03

    Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour (ISO 21940-11:2016)
    3/1/2017 - PDF - English - DIN
    Learn More
    €128.80

  • SAE ARP 4050A:2017-02-07

    Balancing Machines - Description and Evaluation Vertical, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors
    2/7/2017 - PDF - English - SAE
    Learn More
    €73.00

  • DIN 7190-1:2017-02

    Interference fits - Part 1: Calculation and design rules for cylindrical self-locking pressfits
    2/1/2017 - PDF - German - DIN
    Learn More
    €119.60

  • DIN 7190-2:2017-02

    Interference fits - Part 2: Calculation and design rules for conical self-locking pressfits
    2/1/2017 - PDF - German - DIN
    Learn More
    €103.00

  • ASA S 2.75 Part 1:2017

    Shaft Alignment Methodology, Part 1: General Principles, Methods, Practices, and Tolerances
    1/1/2017 - PDF sécurisé - English - ASA
    Learn More
    €123.00

  • ASA S 2.75 Part 2:2017

    Shaft Alignment Methodology, Part 2: Vocabulary
    1/1/2017 - PDF sécurisé - English - ASA
    Learn More
    €90.20

  • BS ISO 21940-11:2016

    Mechanical vibration. Rotor balancing. Procedures and tolerances for rotors with rigid behaviour
    11/30/2016 - PDF - English - BSI
    Learn More
    €236.90

  • 16/30256643 DC


    11/22/2016 - PDF - English - BSI
    Learn More
    €23.00

  • ISO 21940-11:2016

    Mechanical vibration -- Rotor balancing -- Part 11: Procedures and tolerances for rotors with rigid behaviour
    11/1/2016 - Paper - English - ISO
    Learn More
    €144.00

  • DIN ISO 21940-12:2016-09

    Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016)
    9/1/2016 - PDF - German - DIN
    Learn More
    €119.60

  • DIN ISO 21940-12:2016-09

    Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016)
    9/1/2016 - PDF - English - DIN
    Learn More
    €149.40

  • SAE ARP 5435A:2016-08-31

    APU Gas Turbine Engine Test Cell Correlation
    8/31/2016 - PDF - English - SAE
    Learn More
    €73.00

  • SAE ARP 4163:2016-05-20

    Balancing Machines: Tooling Design Criteria
    5/20/2016 - PDF - English - SAE
    Learn More
    €73.00

  • BS ISO 21940-12:2016

    Mechanical vibration. Rotor balancing. Procedures and tolerances for rotors with flexible behaviour
    4/30/2016 - PDF - English - BSI
    Learn More
    €266.80

  • ISO 21940-12:2016

    Mechanical vibration -- Rotor balancing -- Part 12: Procedures and tolerances for rotors with flexible behaviour
    4/1/2016 - Paper - English - ISO
    Learn More
    €144.00

  • AGMA 9006-A:2016

    Flexible Couplings - Basis for Rating
    1/1/2016 - PDF sécurisé - English - AGMA
    Learn More
    €61.20

  • NF E22-621, E22-621 (12/2015)

    Mechanical transmissions - Pressed-on assemblies on cylindrical shaft - Function, realisation, calculation - Transmissions mécaniques - Assemblages frettés sur portée cylindrique - Fonction, réalisation, calcul
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €104.89

  • ASTM A503/A503M-15

    Standard Specification for Ultrasonic Examination of Forged Crankshafts
    5/1/2015 - PDF - English - ASTM
    Learn More
    €38.00

  • ASTM A503/A503M-15 + Redline

    Standard Specification for Ultrasonic Examination of Forged Crankshafts
    5/1/2015 - PDF - English - ASTM
    Learn More
    €45.00

  • DIN ISO 21940-12 Beiblatt 1:2015-04

    Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour - Supplement 1: Procedure for balancing at multiple rotational speeds
    4/1/2015 - PDF - German - DIN
    Learn More
    €209.50

  • DIN 5480-2:2015-03

    Involute splines based on reference diameters - Part 2: Nominal and inspection dimensions
    3/1/2015 - PDF - German - DIN
    Learn More
    €119.60

  • AGMA 9112-B:2015

    Bores and keyways for flexible couplings (Metric series)
    1/1/2015 - PDF sécurisé - English - AGMA
    Learn More
    €55.80

  • SAE J 499:2014-06-05

    Parallel Side Splines for Soft Broached Holes in Fittings (Stabilized: Jun 2014)
    6/5/2014 - PDF - English - SAE
    Learn More
    €73.00

  • SAE J 501:2014-06-05

    Shaft Ends (Stabilized: Jun 2014)
    6/5/2014 - PDF - English - SAE
    Learn More
    €73.00

  • AGMA 9002-C:2014

    Bores and keyways for flexible couplings (Inch series)
    1/1/2014 - PDF sécurisé - English - AGMA
    Learn More
    €61.20

  • DIN ISO 21940-21:2013-09

    Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines (ISO 21940-21:2012)
    9/1/2013 - PDF - German - DIN
    Learn More
    €136.80

  • DIN ISO 21940-21:2013-09

    Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines (ISO 21940-21:2012)
    9/1/2013 - PDF - English - DIN
    Learn More
    €171.10

  • BS ISO 21940-31:2013

    Mechanical vibration. Rotor balancing. Susceptibility and sensitivity of machines to unbalance
    8/31/2013 - PDF - English - BSI
    Learn More
    €202.40

  • ISO 21940-31:2013

    Mechanical vibration -- Rotor balancing -- Part 31: Susceptibility and sensitivity of machines to unbalance
    8/1/2013 - Paper - English - ISO
    Learn More
    €123.00

  • FD E22-057-3, E22-057-3 (03/2013)

    Mechanical transmissions - Shafts and axles, calculation of load capacity - Part 3 : examples - Transmissions mécaniques
    3/1/2013 - Paper - French - AFNOR
    Learn More
    €66.72

  • SAE ARP 1382A:2012-12-17

    Design Criteria for Balancing Machine Tooling (Stabilized: Dec 2012)
    12/17/2012 - PDF - English - SAE
    Learn More
    €70.20

  • SAE ARP 587C:2012-12-17

    Balancing Machines - Description and Evaluation Horizontal, Two-Plane, Soft-Bearing Type for Gas Turbine Rotors (Stabilized: Dec 2012)
    12/17/2012 - PDF - English - SAE
    Learn More
    €73.00

  • DIN 743-1:2012-12

    Calculation of load capacity of shafts and axles - Part 1: General
    12/1/2012 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 743-1:2012-12

    Calculation of load capacity of shafts and axles - Part 1: General
    12/1/2012 - PDF - English - DIN
    Learn More
    €111.40

  • DIN 743-2:2012-12

    Calculation of load capacity of shafts and axles - Part 2: Theoretical stress concentration factors and fatigue notch factors
    12/1/2012 - PDF - German - DIN
    Learn More
    €103.00

  • DIN 743-2:2012-12

    Calculation of load capacity of shafts and axles - Part 2: Theoretical stress concentration factors and fatigue notch factors
    12/1/2012 - PDF - English - DIN
    Learn More
    €128.80

  • DIN 743-3:2012-12

    Calculation of load capacity of shafts and axles - Part 3: Strength of materials
    12/1/2012 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 743-3:2012-12

    Calculation of load capacity of shafts and axles - Part 3: Strength of materials
    12/1/2012 - PDF - English - DIN
    Learn More
    €51.00

  • DIN 743-4:2012-12

    Calculation of load capacity of shafts and axles - Part 4: Fatigue limit, endurance limit - Equivalently damaging continuous stress
    12/1/2012 - PDF - German - DIN
    Learn More
    €54.80

  • DIN 743-4:2012-12

    Calculation of load capacity of shafts and axles - Part 4: Fatigue limit, endurance limit - Equivalently damaging continuous stress
    12/1/2012 - PDF - English - DIN
    Learn More
    €68.50

  • DIN 743 Beiblatt 1:2012-12

    Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3
    12/1/2012 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 743 Beiblatt 1:2012-12

    Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3
    12/1/2012 - PDF - English - DIN
    Learn More
    €94.40

  • DIN 743 Beiblatt 2:2012-12

    Calculation of load capacity of shafts and axles - Supplement 2: Examples to part 4
    12/1/2012 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 743 Beiblatt 2:2012-12

    Calculation of load capacity of shafts and axles - Supplement 2: Examples to part 4
    12/1/2012 - PDF - English - DIN
    Learn More
    €59.60

  • DIN ISO 21940-14:2012-10

    Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors (ISO 21940-14:2012)
    10/1/2012 - PDF - German - DIN
    Learn More
    €82.60

  • DIN ISO 21940-14:2012-10

    Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors (ISO 21940-14:2012)
    10/1/2012 - PDF - English - DIN
    Learn More
    €103.10

  • DIN ISO 21940-23:2012-09

    Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines (ISO 21940-23:2012)
    9/1/2012 - PDF - German - DIN
    Learn More
    €96.00

  • DIN ISO 21940-23:2012-09

    Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines (ISO 21940-23:2012)
    9/1/2012 - PDF - English - DIN
    Learn More
    €120.20

  • BS ISO 21940-14:2012 (R2017)

    Mechanical vibration. Rotor balancing. Procedures for assessing balance errors
    8/31/2012 - PDF - English - BSI
    Learn More
    €202.40

  • DIN 6892:2012-08

    Drive type fastenings without taper action - Parallel keys - Calculation and design
    8/1/2012 - PDF - German - DIN
    Learn More
    €119.60

  • DIN ISO 21940-13:2012-08

    Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 21940-13:2012)
    8/1/2012 - PDF - German - DIN
    Learn More
    €96.00

  • DIN ISO 21940-13:2012-08

    Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 21940-13:2012)
    8/1/2012 - PDF - English - DIN
    Learn More
    €120.20

  • DIN ISO 21940-32:2012-08

    Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention (ISO 21940-32:2012)
    8/1/2012 - PDF - German - DIN
    Learn More
    €82.60

  • DIN ISO 21940-32:2012-08

    Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention (ISO 21940-32:2012)
    8/1/2012 - PDF - English - DIN
    Learn More
    €103.10

  • BS ISO 21940-21:2012

    Mechanical vibration. Rotor balancing. Description and evaluation of balancing machines
    7/31/2012 - PDF - English - BSI
    Learn More
    €282.90

  • ISO 21940-21:2012 (R2019)

    Mechanical vibration -- Rotor balancing -- Part 21: Description and evaluation of balancing machines
    7/1/2012 - Paper - English - ISO
    Learn More
    €186.00

  • ISO 21940-14:2012 (R2017)

    Mechanical vibration -- Rotor balancing -- Part 14: Procedures for assessing balance errors
    7/1/2012 - Paper - English - ISO
    Learn More
    €92.00

  • BS ISO 21940-23:2012 (R2017)

    Mechanical vibration. Rotor balancing. Enclosures and other protective measures for the measuring station of balancing machines
    6/30/2012 - PDF - English - BSI
    Learn More
    €236.90

  • ISO 21940-23:2012 (R2017)

    Mechanical vibration -- Rotor balancing -- Part 23: Enclosures and other protective measures for the measuring station of balancing machines
    6/1/2012 - Paper - English - ISO
    Learn More
    €123.00

  • BS ISO 21940-32:2012 (R2017)

    Mechanical vibration. Rotor balancing. Shaft and fitment key convention
    4/30/2012 - PDF - English - BSI
    Learn More
    €202.40

  • BS ISO 21940-13:2012 (R2017)

    Mechanical vibration. Rotor balancing. Criteria and safeguards for the insitu balancing of medium and large rotors
    4/30/2012 - PDF - English - BSI
    Learn More
    €236.90

  • DIN 32712-2:2012-03

    Shaft to collar connection - Polygon profile P4C - Part 2: Calculation and dimensioning
    3/1/2012 - PDF - German - DIN
    Learn More
    €40.80

  • NF E22-057-1, E22-057-1 (03/2012)

    Mechanical transmissions - Shafts and axles, calculation of load capacity - Part 1 : general - Transmissions mécaniques
    3/1/2012 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF E22-057-2, E22-057-2 (03/2012)

    Mechanical transmissions - Shafts and axles, calculation of load capacity - Part 2 : influence factors - Transmissions mécaniques
    3/1/2012 - Paper - French - AFNOR
    Learn More
    €66.72

  • ISO 21940-13:2012 (R2017)

    Mechanical vibration -- Rotor balancing -- Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors
    3/1/2012 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 21940-32:2012 (R2017)

    Mechanical vibration -- Rotor balancing -- Part 32: Shaft and fitment key convention
    3/1/2012 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 21940-32:2012 (R2017)

    Mechanical vibration -- Rotor balancing -- Part 32: Shaft and fitment key convention
    3/1/2012 - Paper - French - ISO
    Learn More
    €92.00

  • ISO 4156-2:2005/Cor 1:2011

    Straight cylindrical involute splines -- Metric module, side fit -- Part 2: Dimensions
    12/1/2011 - Paper - English - ISO
    Learn More
    €0.00

  • SAE ARP 4048:2011-07-19

    BALANCING MACHINES - DESCRIPTION AND EVALUATION HORIZONTAL, TWO-PLANE, HARD-BEARING TYPE FOR GAS TURBINE ROTORS
    7/19/2011 - PDF - English - SAE
    Learn More
    €73.00

  • DIN 471:2011-04

    Retaining rings for shafts - Normal type and heavy type
    4/1/2011 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 471:2011-04

    Retaining rings for shafts - Normal type and heavy type
    4/1/2011 - PDF - English - DIN
    Learn More
    €103.10

  • DIN 983:2011-04

    Retaining rings with lugs for shafts
    4/1/2011 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 983:2011-04

    Retaining rings with lugs for shafts
    4/1/2011 - PDF - English - DIN
    Learn More
    €94.40

  • NF ISO 14694/A1, E51-004/A1 (03/2011)

    Industrial fans - Specifications for balance quality and vibration levels - Amendment 1 - Ventilateurs industriels
    3/1/2011 - Paper - French - AFNOR
    Learn More
    €22.83

  • AGMA 9110-A:2011

    Flexible Couplings - Potential unbalance classification (Metric Edition)
    1/1/2011 - PDF sécurisé - English - AGMA
    Learn More
    €65.70

  • AGMA 9000-D:2011

    Flexible Couplings - Potential Unbalance Classification
    1/1/2011 - PDF sécurisé - English - AGMA
    Learn More
    €71.10

  • ISO 14694:2003/Amd 1:2010

    Industrial fans -- Specifications for balance quality and vibration levels
    11/1/2010 - Paper - English - ISO
    Learn More
    €17.00

  • ISO 14694:2003/Amd 1:2010

    Industrial fans -- Specifications for balance quality and vibration levels
    11/1/2010 - Paper - French - ISO
    Learn More
    €17.00

  • DIN 5464:2010-03

    Straight-sided splines - Heavy series
    3/1/2010 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 5464:2010-03

    Straight-sided splines - Heavy series
    3/1/2010 - PDF - English - DIN
    Learn More
    €59.60

  • JIS B 8277/ERRATUM 1:2010

    ERRATUM
    2/9/2010 - PDF - Japanese - JSA
    Learn More
    €0.00

  • JIS B 8277/ERRATUM 1:2010

    ERRATUM
    2/9/2010 - PDF - English - JSA
    Learn More
    €0.00

  • DIN EN ISO 14691:2009-05

    Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - General-purpose applications (ISO 14691:2008); English version EN ISO 14691:2008
    5/1/2009 - PDF - English - DIN
    Learn More
    €108.80

  • JIS B 0904/AMENDMENT 1:2009 (R2013)

    Conical shaft ends for cone taper ratio 1:10 (Amendment 1)
    3/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1301/AMENDMENT 1:2009 (R2013)

    Keys and their corresponding keyways (Amendment 1)
    3/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN 32711-1:2009-03

    Shaft to collar connection - Polygon profil P3G - Part 1: Generalities and geometry
    3/1/2009 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 32711-1:2009-03

    Shaft to collar connection - Polygon profil P3G - Part 1: Generalities and geometry
    3/1/2009 - PDF - English - DIN
    Learn More
    €59.60

  • DIN 32711-2:2009-03

    Shaft to collar connection - Polygon profile P3G - Part 2: Calculation and dimensioning
    3/1/2009 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 32711-2:2009-03

    Shaft to collar connection - Polygon profile P3G - Part 2: Calculation and dimensioning
    3/1/2009 - PDF - English - DIN
    Learn More
    €51.00

  • DIN 32712-1:2009-03

    Shaft to collar connection - Polygon profile P4C - Part 1: Generalities and geometry
    3/1/2009 - PDF - German - DIN
    Learn More
    €47.60

  • JIS B 1456/AMENDMENT 1:2009 (R2013)

    Roller chain shaft couplings (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 8277:2008 (R2013)

    Expansion joint for pressure vessels
    11/25/2008 - PDF - Japanese - JSA
    Learn More
    €50.18

  • DIN 69888:2008-09

    Requirements for balancing of rotating tool systems
    9/1/2008 - PDF - German - DIN
    Learn More
    €108.80

  • DIN ISO 19499:2008-03

    Mechanical vibration - Balancing - Guidance on the use and application of balancing standards (ISO 19499:2007)
    3/1/2008 - PDF - German - DIN
    Learn More
    €114.10

  • DIN ISO 19499:2008-03

    Mechanical vibration - Balancing - Guidance on the use and application of balancing standards (ISO 19499:2007)
    3/1/2008 - PDF - English - DIN
    Learn More
    €142.80

  • AGMA 9004-B:2008 (R2014)

    Flexible Couplings - Mass Elastic Properties and Other Characteristics
    1/1/2008 - PDF sécurisé - English - AGMA
    Learn More
    €65.70

  • GOST ISO 1940-1:2007

    Vibration. Balance quality requirements for rotors in a constant (rigid) state. Part 1. Specification and verification of balance tolerances
    1/1/2007 - PDF - English - GOST
    Learn More
    €324.00

  • DIN 5480-1:2006-03

    Involute splines based on reference diameters - Part 1: Generalities
    3/1/2006 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 5480-1:2006-03

    Involute splines based on reference diameters - Part 1: Generalities
    3/1/2006 - PDF - English - DIN
    Learn More
    €94.40

  • DIN 5480-15:2006-03

    Involute splines based on reference diameters - Part 15: Inspection
    3/1/2006 - PDF - German - DIN
    Learn More
    €96.00

  • DIN 5480-15:2006-03

    Involute splines based on reference diameters - Part 15: Inspection
    3/1/2006 - PDF - English - DIN
    Learn More
    €120.20

  • DIN 5480-16:2006-03

    Involute splines based on reference diameters - Part 16: Tools
    3/1/2006 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 5480-16:2006-03

    Involute splines based on reference diameters - Part 16: Tools
    3/1/2006 - PDF - English - DIN
    Learn More
    €103.10

  • BS ISO 4156-3:2005 (R2015)

    Straight cylindrical involute splines. Metric module, side fit. Inspection
    1/23/2006 - PDF - English - BSI
    Learn More
    €282.90

  • BS ISO 4156-1:2005 (R2015)

    Straight cylindrical involute splines. Metric module, side fit. Generalities
    1/20/2006 - PDF - English - BSI
    Learn More
    €282.90

  • BS ISO 4156-2:2005 (R2015)

    Straight cylindrical involute splines. Metric module, side fit. Dimensions
    1/19/2006 - PDF - English - BSI
    Learn More
    €379.50

  • AGMA 9104-A:2006 (R2012)

    Flexible Couplings - Mass Elastic Properties and Other Characteristics (Metric Edition)
    1/1/2006 - PDF sécurisé - English - AGMA
    Learn More
    €60.30

  • NF ISO 4156-1, E22-144-1 (01/2006)

    Straight cylindrical involute splines - Metric module, side fit - Part 1 : generalities - Cannelures cylindriques droites à flancs en développante
    1/1/2006 - Paper - French - AFNOR
    Learn More
    €127.55

  • NF ISO 4156-2, E22-144-2 (01/2006)

    Straight cylindrical involute splines - Metric module, side fit - Part 2 : dimensions - Cannelures cylindriques droites à flancs en développante
    1/1/2006 - Paper - French - AFNOR
    Learn More
    €198.55

  • NF ISO 4156-3, E22-144-3 (01/2006)

    Straight cylindrical involute splines - Metric module, side fit - Part 3 : inspection - Cannelures cylindriques droites à flancs en développante
    1/1/2006 - Paper - French - AFNOR
    Learn More
    €104.89

  • ISO 4156-1:2005 (R2015)

    Straight cylindrical involute splines -- Metric module, side fit -- Part 1: Generalities
    10/1/2005 - Paper - English - ISO
    Learn More
    €186.00

  • ISO 4156-1:2005 (R2015)

    Straight cylindrical involute splines -- Metric module, side fit -- Part 1: Generalities
    10/1/2005 - Paper - French - ISO
    Learn More
    €186.00

  • ISO 4156-2:2005 (R2015)

    Straight cylindrical involute splines -- Metric module, side fit -- Part 2: Dimensions
    10/1/2005 - Paper - English - ISO
    Learn More
    €207.00

  • ISO 4156-2:2005 (R2015)

    Straight cylindrical involute splines -- Metric module, side fit -- Part 2: Dimensions
    10/1/2005 - Paper - French - ISO
    Learn More
    €207.00

  • ISO 4156-3:2005 (R2015)

    Straight cylindrical involute splines -- Metric module, side fit -- Part 3: Inspection
    10/1/2005 - Paper - English - ISO
    Learn More
    €165.00

  • ISO 4156-3:2005 (R2015)

    Straight cylindrical involute splines -- Metric module, side fit -- Part 3: Inspection
    10/1/2005 - Paper - French - ISO
    Learn More
    €165.00

  • UNE-EN 60372:2004

    Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
    11/5/2004 - PDF - English - AENOR
    Learn More
    €64.80

  • UNE-EN 60372:2004

    Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
    11/5/2004 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • VDI 2722:2003-08 (R2014)

    Cardan shafts and cardan shaft lines - Homokinematic mechanisms
    8/1/2003 - PDF - English, German - VDI
    Learn More
    €133.51

  • NF ISO 14694, E51-004 (07/2003)

    Industrial fans - Specifications for balance quality and vibration levels - Ventilateurs industriels
    7/1/2003 - Paper - French - AFNOR
    Learn More
    €104.89

  • ISO 14694:2003 (R2014)

    Industrial fans -- Specifications for balance quality and vibration levels
    3/1/2003 - Paper - English - ISO
    Learn More
    €165.00

  • ISO 14694:2003 (R2014)

    Industrial fans -- Specifications for balance quality and vibration levels
    3/1/2003 - Paper - French - ISO
    Learn More
    €165.00

  • AGMA 9009-D:2002 (R2014)

    Flexible Couplings - Nomenclature for Flexible Couplings
    1/1/2002 - PDF sécurisé - English - AGMA
    Learn More
    €46.80

  • JIS B 0903:2001 (R2015)

    Cylindrical shaft ends
    3/20/2001 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0904:2001 (R2005)

    Conical shaft ends for cone taper ratio 1:10
    3/20/2001 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN 5466-1:2000-10

    Splined joints, calculation of load capacity - Part 1: General basis
    10/1/2000 - PDF - German - DIN
    Learn More
    €82.60

  • AGMA 9008-B:2000 (R2012)

    Flexible Couplings - Gear Type - Flange Dimensions, Inch Series
    1/1/2000 - PDF sécurisé - English - AGMA
    Learn More
    €37.80

  • DIN ISO 10817-1:1999-11

    Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration (ISO 10817-1:1998)
    11/1/1999 - PDF - German - DIN
    Learn More
    €75.40

  • BS ISO 10817-1:1999


    6/15/1999 - PDF - English - BSI
    Learn More
    €202.40

  • NF ISO 10814, E90-603 (01/1997)

    Mechanical vibration. Susceptibility and sensitivity of machines to unbalance. - Vibrations mécaniques
    1/1/1997 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF EN 3612, L32-612 (11/1996)

    Aerospace series. Undercuts for splines. Design standard. - Série aérospatiale
    11/1/1996 - Paper - French - AFNOR
    Learn More
    €42.41

  • DIN 3760:1996-09

    Rotary shaft lip type seals
    9/1/1996 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 3760:1996-09

    Rotary shaft lip type seals
    9/1/1996 - PDF - English - DIN
    Learn More
    €77.20

  • JIS B 1301:1996 (R2005)

    Keys and their corresponding keyways
    3/1/1996 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1601:1996 (R2015)

    Straight-sided splines for cylindrical shafts with internal centering - Dimensions, tolerances and verification
    1/1/1996 - PDF - Japanese - JSA
    Learn More
    €25.00

  • AGMA 922-A:1996

    Load Classification and Service Factors for Flexible Couplings
    1/1/1996 - PDF sécurisé - English - AGMA
    Learn More
    €37.80

  • JIS B 7737:1995 (R2015)

    Balancing machines
    4/1/1995 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1603:1995 (R2015)

    Straight cylindrical involute splines - side fit - Generalities, dimensions and inspection
    3/1/1995 - PDF - Japanese - JSA
    Learn More
    €132.34

  • JIS B 9220:1993 (R2013)

    Agricultural machinery - General requirement for safety
    8/1/1993 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0006:1993 (R2013)

    Technical drawings - Representation of splines and serrations
    5/1/1993 - PDF - Japanese - JSA
    Learn More
    €25.00

  • BS 6186-1:Addendum No. 1:1993

    Specification for straight cylindrical involute splines: metric module, side fit. Inspection
    3/15/1993 - PDF - English - BSI
    Learn More
    €379.50

  • JIS B 0905:1992 (R2016)

    Rotating machines - Balance quality requirements of rigid rotors
    7/1/1992 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1451:1991 (R2016)

    Rigid flanged shaft couplings
    12/1/1991 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1452:1991 (R2016)

    Flexible flanged shaft couplings
    12/1/1991 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF E22-179, E22-179 (12/1991) (R2011)

    Mechanical transmissions. Woodruff keys. Dimensions and tolerances. - Transmissions mécaniques
    12/1/1991 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF E22-182, E22-182 (12/1991) (R2011)

    Mechanical transmissions. Tangential keys and keyways. Dimensions and tolerances. - Transmissions mécaniques
    12/1/1991 - Paper - French - AFNOR
    Learn More
    €53.41

  • E22-181, E22-181 (12/1991) (R2011)

    Mechanical transmissions. Parallel keys fastened by screws. Dimensions. - Transmissions mécaniques
    12/1/1991 - Paper - French - AFNOR
    Learn More
    €42.41

  • VDI/VDE 2254 Blatt 1:1990-09

    Precision engineering components; rotating couplings; permanent couplings
    9/1/1990 - PDF - German - VDI
    Learn More
    €71.24

  • UNE 18076-1:1990

    STRAIGHT CYLINDRICAL INVOLUTE SPLINES. METRIC MODULE, SIDE FIT. PART 1: GENERALITIES.
    3/24/1990 - PDF - Spanish - AENOR
    Learn More
    €70.00

  • UNE 18076-2:1990

    STRAIGHT CYLINDRICAL INVOLUTE SPLINES. METRIC MODULE, SIDE FIT. PART 2: DIMENSIONS.
    1/17/1990 - PDF - Spanish - AENOR
    Learn More
    €114.00

  • JIS B 1456:1989 (R2005)

    Roller chain shaft couplings
    9/1/1989 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF R94-302, R94-302 (09/1989) (R2014)

    Road vehicles. Fillets, chamfers and backing off. - Véhicules routiers
    9/1/1989 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E22-625, E22-625 (12/1988)

    Mechanical transmissions. Concentric assemblies on cylindrical carried with intermediate bush with conical external surface. Calculation. - Transmissions mécaniques
    12/1/1988 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E22-622, E22-622 (12/1988)

    Mechanical transmissions. Pressed-on assemblies on conical bearings. Function, realization, calculation. - Transmissions mécaniques
    12/1/1988 - Paper - French - AFNOR
    Learn More
    €53.41

  • JIS B 1453:1988 (R2014)

    Geared type shaft couplings
    5/1/1988 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1454:1988 (R2014)

    Universal ball joints
    5/1/1988 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1455:1988 (R2015)

    Rubber shaft couplings
    5/1/1988 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF L05-026, L05-026 (05/1988) (R2008)

    Aerospace industry. ISO M and mj threads. Undercut relief and lead-in chamfers. - Industrie aérospatiale
    5/1/1988 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E22-175, E22-175 (11/1987) (R2012)

    Keying. Assembly by means of parrallel keys. Dimensions.
    11/1/1987 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E22-176, E22-176 (11/1987) (R2012)

    Keying. Forced assembly by means of taper keys. Dimensions.
    11/1/1987 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E22-177, E22-177 (11/1987) (R2012)

    Parallel keys. Dimensions.
    11/1/1987 - Paper - French - AFNOR
    Learn More
    €30.64

  • NF E22-178, E22-178 (11/1987) (R2012)

    Taper keys forced assembly. Dimensions.
    11/1/1987 - Paper - French - AFNOR
    Learn More
    €30.64

  • JIS B 1351:1987 (R2013)

    Split pins
    10/1/1987 - PDF - Japanese - JSA
    Learn More
    €32.50

  • DIN 28135:1987-05

    Axial thrust washers for flange couplings of vertical shaft for agitators
    5/1/1987 - PDF - German - DIN
    Learn More
    €40.80

  • NF E22-610, E22-610 (12/1986) (R2011)

    Mechanical transmissions. Coupling devices. Classification. Terminology. Graphical symbols.
    12/1/1986 - Paper - French - AFNOR
    Learn More
    €42.41

  • DIN ISO 14:1986-12

    Straigth-sided splines for cylindrical shafts with internal centering; dimensions, tolerances and verification; identical with ISO 14, edition 1982
    12/1/1986 - PDF - German - DIN
    Learn More
    €75.40

  • BS 5686:1986 (R2015)

    Specification for straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements
    8/29/1986 - PDF - English - BSI
    Learn More
    €144.90

  • DIN 740-1:1986-08

    Power transmission engineering; flexible shaft couplings; technical delivery conditions
    8/1/1986 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 740-1:1986-08

    Power transmission engineering; flexible shaft couplings; technical delivery conditions
    8/1/1986 - PDF - English - DIN
    Learn More
    €94.40

  • DIN 740-2:1986-08

    Power transmission engineering; flexible shaft couplings; parameters and design principles
    8/1/1986 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 740-2:1986-08

    Power transmission engineering; flexible shaft couplings; parameters and design principles
    8/1/1986 - PDF - English - DIN
    Learn More
    €77.20

  • NF E22-131, E22-131 (04/1986) (R2011)

    Straight-sided splines for cylindrical shafts with internal centering. Dimensions, tolerance and verification.
    4/1/1986 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF E90-601, E90-601 (04/1986) (R2006)

    Mechanical vibration and shock. Balancing machines. Description and evaluation.
    4/1/1986 - Paper - French - AFNOR
    Learn More
    €87.56

Items 1 to 200 of 324 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2