21.020 : Characteristics and design of machines, apparatus, equipment

Items 1 to 200 of 475 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  • DIN EN 9278:2018-04

    Aerospace series - General Principles of Obsolescence Management of chemicals, materials and processes; German and English version FprEN 9278:2018
    4/1/2018 - PDF - English, German - DIN
    Learn More
    €96.00

  • VDI 4008 Blatt 8:2018-02

    Reliability methodology - Renewal processes
    2/1/2018 - PDF - German - VDI
    Learn More
    €112.06

  • UNE 200008:2018 IN

    Qualification of technical and management personnel in the field of Dependability and Industrial Safety engineering (RAMS Engineer)
    1/31/2018 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • SAE J 965:2018-01-09

    Abrasive Wear (Stabilized: Jan 2018)
    1/9/2018 - PDF - English - SAE
    Learn More
    €66.30

  • ISO/DIS 21143:2018

    Technical product documentation (TPD) - Requirements of digital mock-up virtual assembly test for mechanical products
    1/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • DIN 4003-90:2018-01

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 90: Tool holders for indexable inserts
    1/1/2018 - PDF - German - DIN
    Learn More
    €209.50

  • DIN 4000-90:2018-01

    Tabular layouts of properties - Part 90: Tool holders for indexable inserts
    1/1/2018 - PDF - German - DIN
    Learn More
    €108.80

  • NF E90-760-3/A1, NF ISO 10816-3/A1 (11/2017)

    Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3 : industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ - Amendment 1
    11/4/2017 - Paper - French - AFNOR
    Learn More
    €21.69

  • NF E90-760-3/A1, NF ISO 10816-3/A1 (11/2017)

    Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3 : industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ - Amendment 1
    11/4/2017 - Paper - English - AFNOR
    Learn More
    €21.69

  • VDI 4006 Blatt 2:2017-11

    Human reliability - Methods for quantitative assessment of human reliability
    11/1/2017 - PDF - English, German - VDI
    Learn More
    €139.88

  • DIN 4000-180:2017-11

    Tabular layouts of properties - Part 180: Tool assemblies
    11/1/2017 - PDF - German - DIN
    Learn More
    €119.60

  • DIN 4003-180:2017-11

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 180: Tool assemblies
    11/1/2017 - PDF - German - DIN
    Learn More
    €103.00

  • DIN 4000-86:2017-11

    Tabular layouts of properties - Part 86: Drills and counter sinking tools for indexable inserts
    11/1/2017 - PDF - German - DIN
    Learn More
    €103.00

  • DIN 4003-86:2017-11

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 86: Drills and counter sinking tools for indexable inserts
    11/1/2017 - PDF - German - DIN
    Learn More
    €191.40

  • DIN 4000-140/A1:2017-10

    Tabular layouts of properties - Part 140: Toothing system data of work pieces; Amendment 1
    10/1/2017 - PDF - German - DIN
    Learn More
    €23.80

  • DIN 4003-1:2017-10

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 1: Overview and fundamental principles
    10/1/2017 - PDF - German - DIN
    Learn More
    €82.60

  • VDI 4010:2017-10

    Reliability improvement during the in-service phase
    10/1/2017 - PDF - English, German - VDI
    Learn More
    €112.06

  • DIN 4000-81:2017-09

    Tabular layouts of properties - Part 81: Drills and countersinking tools with non-indexable cutting edges
    9/1/2017 - PDF - German - DIN
    Learn More
    €114.10

  • DIN 4003-81:2017-09

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 81: Drills and counter sinking tools with non-indexable cutting edges
    9/1/2017 - PDF - German - DIN
    Learn More
    €147.20

  • VDI 6224 Blatt 3:2017-09

    Biomimetics - Integrated product development process for biomimetic optimisation
    9/1/2017 - PDF - English, German - VDI
    Learn More
    €127.14

  • SAE J 1915:2017-08-22

    Recommended Remanufacturing Procedures for Manual Transmission Clutch Assemblies (Stabilized: Aug 2017)
    8/22/2017 - PDF - English - SAE
    Learn More
    €66.30

  • BS EN 60300-3-3:2017

    Dependability management. Application guide. Life cycle costing
    8/3/2017 - Paper - English - BSI
    Learn More
    €255.36

  • ISO 10816-3 AMD 1:2017

    Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ; Amendment 1
    8/1/2017 - Paper - English - ISO
    Learn More
    €17.00

  • ISO 10816-3 AMD 1:2017

    Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ; Amendment 1
    8/1/2017 - Paper - French - ISO
    Learn More
    €17.00

  • UNE-EN 62550:2017

    Spare parts provisioning (Endorsed by Asociación Española de Normalización in August of 2017.)
    8/1/2017 - PDF - English - AENOR
    Learn More
    €103.00

  • PR NF C20-853, PR NF EN 62853 (07/2017)

    Open Systems Dependability
    7/21/2017 - Paper - French - AFNOR
    Learn More
    €112.96

  • NF C20-300-3-3, NF EN 60300-3-3 (07/2017)

    Dependability management - Part 3-3: application guide - Life cycle costing
    7/14/2017 - PDF - French - AFNOR
    Learn More
    €118.29

  • NF C20-300-3-3, NF EN 60300-3-3 (07/2017)

    Dependability management - Part 3-3: application guide - Life cycle costing
    7/14/2017 - PDF - English - AFNOR
    Learn More
    €118.29

  • NF C20-346-1, NF EN 61511-1 (06/2017)

    Functional safety - Safety instrumented systems for the process industry sector - Part 1 : framework, definitions, system, hardware and application programming requirements
    6/17/2017 - PDF - French - AFNOR
    Learn More
    €164.80

  • NF C20-346-2, NF EN 61511-2 (06/2017)

    Functional safety - Safety instrumented systems for the process industry sector - Part 2 : guidelines for the application of IEC 61511-1
    6/17/2017 - PDF - French - AFNOR
    Learn More
    €243.69

  • NF C20-346-3, NF EN 61511-3 (06/2017)

    Functional safety - Safety instrumented systems for the process industry sector - Part 3 : guidance for the determination of the required safety integrity levels
    6/17/2017 - PDF - French - AFNOR
    Learn More
    €189.46

  • NF C20-346-1, NF EN 61511-1 (06/2017)

    Functional safety - Safety instrumented systems for the process industry sector - Part 1 : framework, definitions, system, hardware and application programming requirements
    6/17/2017 - PDF - English - AFNOR
    Learn More
    €164.80

  • NF C20-346-2, NF EN 61511-2 (06/2017)

    Functional safety - Safety instrumented systems for the process industry sector - Part 2 : guidelines for the application of IEC 61511-1
    6/17/2017 - PDF - English - AFNOR
    Learn More
    €243.69

  • NF C20-346-3, NF EN 61511-3 (06/2017)

    Functional safety - Safety instrumented systems for the process industry sector - Part 3 : guidance for the determination of the required safety integrity levels
    6/17/2017 - PDF - English - AFNOR
    Learn More
    €189.46

  • DIN 4000-102:2017-06

    Tabular layouts of properties - Part 102: Data exchange for tabular layouts of properties with XML schema
    6/1/2017 - PDF - German - DIN
    Learn More
    €96.00

  • ASD-STAN prEN 9278 (01/06/2017)

    Aerospace series - General Principles of Obsolescence Management of chemicals, materials and processes
    6/1/2017 - PDF - English - ASD-STAN
    Learn More
    €80.00

  • DIN 4000-162:2017-05

    Tabular layout of properties - Part 162: Washers and rings
    5/1/2017 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 4000-145:2017-05

    Tabular layouts of properties - Part 145: Broaching tools for cylindrical gears
    5/1/2017 - PDF - German - DIN
    Learn More
    €108.80

  • BS EN 62550:2017

    Spare parts provisioning
    3/31/2017 - Paper - English - BSI
    Learn More
    €271.32

  • FD E01-016, FD CEN/TR 17004 (02/2017)

    Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities
    2/8/2017 - Paper - French - AFNOR
    Learn More
    €50.74

  • FD E01-016, FD CEN/TR 17004 (02/2017)

    Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities
    2/8/2017 - Paper - English - AFNOR
    Learn More
    €50.74

  • UNE-EN 61703:2016

    Mathematical expressions for reliability, availability, maintainability and maintenance support terms (Endorsed by Asociación Española de Normalización in February of 2017.)
    2/1/2017 - PDF - English - AENOR
    Learn More
    €146.00

  • NF C20-344, NF EN 61703 (01/2017)

    Mathematical expressions for reliability, availability, maintainability and maintenance support terms
    1/28/2017 - PDF - French - AFNOR
    Learn More
    €183.45

  • NF C20-344, NF EN 61703 (01/2017)

    Mathematical expressions for reliability, availability, maintainability and maintenance support terms
    1/28/2017 - PDF - English - AFNOR
    Learn More
    €183.45

  • IEC 60300-3-3 (2017-01)

    IEC 60300-3-3:2017 Dependability management - Part 3-3: Application guide - Life cycle costing
    1/27/2017 - PDF - English, French - CEI
    Learn More
    €264.00

  • IEC 62550 (2017-01)

    IEC 62550:2017 Spare parts provisioning
    1/20/2017 - PDF - English, French - CEI
    Learn More
    €297.00

  • JIS B 9955:2017

    General principles on reliability for mechanical products
    1/20/2017 - PDF - Japanese - JSA
    Learn More
    €55.77

  • NF C20-341, NF EN 61078 (01/2017)

    Reliability block diagrams
    1/14/2017 - PDF - French - AFNOR
    Learn More
    €189.46

  • NF C20-341, NF EN 61078 (01/2017)

    Reliability block diagrams
    1/14/2017 - PDF - English - AFNOR
    Learn More
    €189.46

  • BS EN 61703:2016

    Mathematical expressions for reliability, availability, maintainability and maintenance support terms
    12/31/2016 - Paper - English - BSI
    Learn More
    €310.08

  • DIN 4000-95:2016-12

    Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices
    12/1/2016 - PDF - German - DIN
    Learn More
    €180.80

  • DIN 4003-175:2016-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 175: Cassettes, nests and cartridges for indexable inserts
    12/1/2016 - PDF - German - DIN
    Learn More
    €191.40

  • DIN 4000-178:2016-12

    Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli
    12/1/2016 - PDF - German - DIN
    Learn More
    €136.80

  • DIN 4000-179:2016-12

    Tabular layouts of properties - Part 179: Deburring tools
    12/1/2016 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 4003-178:2016-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 178: Probing systems, stylus systems and styli
    12/1/2016 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 4003-179:2016-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 179: Deburring tools
    12/1/2016 - PDF - German - DIN
    Learn More
    €114.10

  • XP E01-009 (10/2016)

    Mechanical products - Collection and communication of data related to regulated substances of high concern
    10/5/2016 - Paper - French - AFNOR
    Learn More
    €63.38

  • DIN 4000-141:2016-10

    Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears
    10/1/2016 - PDF - German - DIN
    Learn More
    €108.80

  • DIN 4000-143:2016-09

    Tabular layouts of properties - Part 143: Pinion type cutters with bore or shank
    9/1/2016 - PDF - German - DIN
    Learn More
    €89.00

  • IEC 61703 (2016-08)

    IEC 61703:2016 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
    8/12/2016 - PDF - English, French - CEI
    Learn More
    €352.00

  • SAE J 185:2016-08-02

    Access Systems for Off-Road Machines (Stabilized: Aug 2016)
    8/2/2016 - PDF - English - SAE
    Learn More
    €66.30

  • VDI/VDE 2645 Blatt 3:2016-07

    Capability test for nutrunning machines - Process capability test - PFU
    7/1/2016 - PDF - German - VDI
    Learn More
    €133.51

  • ASTM E2672-16

    Standard Practice for Identification and Categorization of Tooling
    4/1/2016 - PDF - English - ASTM
    Learn More
    €39.00

  • ASTM E2672-16 + Redline

    Standard Practice for Identification and Categorization of Tooling
    4/1/2016 - PDF - English - ASTM
    Learn More
    €47.00

  • IEC 60050-192 AMD 1 (2016-03)

    IEC 60050-192:2015/AMD1:2016 Amendment 1 - International Electrotechnical Vocabulary - Part 192: Dependability
    3/23/2016 - PDF - English, French - CEI
    Learn More
    €11.00

  • NF E90-656-1, NF ISO 13381-1 (02/2016)

    Condition monitoring and diagnostics of machines - Prognostics - Part 1 : general guidelines
    2/27/2016 - Paper - French - AFNOR
    Learn More
    €72.58

  • NF E90-656-1, NF ISO 13381-1 (02/2016)

    Condition monitoring and diagnostics of machines - Prognostics - Part 1 : general guidelines
    2/27/2016 - Paper - English - AFNOR
    Learn More
    €72.58

  • FMD-2016

    Failure Mode / Mechanism Distributions – FMD-2016
    1/1/2016 - Download - English - QUANTERION
    Learn More
    €212.50

  • UNE-EN 62741:2015

    Demonstration of dependability requirements - The dependability case
    11/25/2015 - PDF - Spanish - AENOR
    Learn More
    €70.00

  • SAE J 1792/1:2015-11-24

    Self-Propelled Sweepers - Air Flow Performance - Part 1: Suction Air Volume Performance
    11/24/2015 - PDF - English - SAE
    Learn More
    €66.30

  • SAE J 1792/2:2015-11-24

    Self-Propelled Sweepers - Air Flow Performance - Part 2: Suction/Blower Fan Performance
    11/24/2015 - PDF - English - SAE
    Learn More
    €66.30

  • NPRD-2016

    Nonelectronic Parts Reliability Data
    9/15/2015 - Paper - English - QUANTERION
    Learn More
    €451.50

  • NPRD-2016

    Nonelectronic Parts Reliability Data
    *NOTE: The CD-ROM or download versions are not PDF versions of the Hardcopy document.
    9/15/2015 - CD-Rom - English - QUANTERION
    Learn More
    €367.50

  • NPRD-2016 Individual

    Nonelectronic Parts Reliability Data
    9/15/2015 - Download - English - QUANTERION
    Learn More
    €315.00

  • NF E01-013 (08/2015)

    Mechatronics - Lifecycle and design of products
    8/29/2015 - Paper - French - AFNOR
    Learn More
    €72.58

  • DIN 4000-210:2015-08

    Tabular layouts of properties - Part 210: Cutting machine tools
    8/1/2015 - PDF - German - DIN
    Learn More
    €224.20

  • DIN EN 60812:2015-08

    Failure Mode and Effects analysis (FMEA) (IEC 56/1579/CD:2014)
    8/1/2015 - PDF - English, German - DIN
    Learn More
    €191.40

  • DIN 4003-210:2015-08

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 210: Cutting machine tools
    8/1/2015 - PDF - German - DIN
    Learn More
    €96.00

  • NF C20-373, NF EN 62741 (07/2015)

    Demonstration of dependability requirements - The dependability case
    7/3/2015 - PDF - French - AFNOR
    Learn More
    €128.70

  • NF C20-372, NF EN 62740 (06/2015)

    Root cause analusis (RCA)
    6/13/2015 - PDF - French - AFNOR
    Learn More
    €153.30

  • DIN 4000-175:2015-06

    Tabular layouts of properties - Part 175: Cassettes, nests and cartridges for indexable inserts
    6/1/2015 - PDF - German - DIN
    Learn More
    €96.00

  • BS EN 62741:2015

    Demonstration of dependability requirements. The dependability case
    5/31/2015 - Paper - English - BSI
    Learn More
    €271.32

  • UNE-EN 60300-1:2015

    Dependability management - Part 1: Guidance for management and application
    5/27/2015 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • VDI 4006 Blatt 1:2015-03

    Human reliability - Ergonomic requirements and methods of assessment
    3/1/2015 - PDF - English, German - VDI
    Learn More
    €127.14

  • IEC 60050-192 (2015-02)

    IEC 60050-192:2015 International electrotechnical vocabulary - Part 192: Dependability
    2/26/2015 - PDF - English, French - CEI
    Learn More
    €352.00

  • IEC 62741 (2015-02)

    IEC 62741:2015 Demonstration of dependability requirements - The dependability case
    2/17/2015 - PDF - English, French - CEI
    Learn More
    €264.00

  • SAE J 1521:2014-12-03

    Truck Driver Shin-Knee Position for Clutch and Accelerator
    12/3/2014 - PDF - English - SAE
    Learn More
    €66.30

  • NF C20-300-1, NF EN 60300-1 (11/2014)

    Dependability management - Part 1 : guidance for management and application
    11/29/2014 - PDF - French - AFNOR
    Learn More
    €128.70

  • VDI 4008 Blatt 5:2014-11

    Reliability methodology - State flow graphs
    11/1/2014 - PDF - English, German - VDI
    Learn More
    €120.38

  • BS EN 60300-1:2014

    Dependability management. Guidance for management and application
    10/31/2014 - Paper - English - BSI
    Learn More
    €255.36

  • FD E01-008 (10/2014)

    Mechanical products - Environmental data
    10/1/2014 - PDF - French - AFNOR
    Learn More
    €188.62

  • DIN 4000-170:2014-09

    Tabular layouts of properties - Part 170: Files and rasps with geometrically determined cutting edges
    9/1/2014 - PDF - German - DIN
    Learn More
    €89.00

  • VDI/VDE 2645 Blatt 2:2014-09

    Capability test for fastening technology - Machine capability test - MCT
    9/1/2014 - PDF - English, German - VDI
    Learn More
    €222.69

  • UNE-EN 60300-3-12:2014

    Dependability management - Part 3-12: Application guide - Integrated logistic support
    6/11/2014 - PDF - Spanish - AENOR
    Learn More
    €75.00

  • VDI 3720 Blatt 1:2014-06

    Design of low-noise machinery and equipment - construction tasks and methodology
    6/1/2014 - PDF - German - VDI
    Learn More
    €120.38

  • UNE-EN 62551:2014

    Analysis techniques for dependability - Petri net techniques
    5/28/2014 - PDF - Spanish - AENOR
    Learn More
    €86.00

  • IEC 60300-1 (2014-05)

    IEC 60300-1:2014 Dependability management - Part 1: Guidance for management and application
    5/23/2014 - PDF - English - CEI
    Learn More
    €264.00

  • IEC 60300-1 (2014-05)

    IEC 60300-1:2014 Dependability management - Part 1: Guidance for management and application
    5/23/2014 - PDF - English, French - CEI
    Learn More
    €264.00

  • Écoconception des produits mécaniques


    4/28/2014 - Paper - French - AFNOR
    Learn More
    €395.00

  • Expanded Applications of FMECA

    Expanded Applications of FMECA
    4/4/2014 - PDF - English - QUANTERION
    Learn More
    €156.00

  • BS 5760-0:2014

    Reliability of systems, equipment and components. Guide to reliability and maintainability
    3/31/2014 - Paper - English - BSI
    Learn More
    €225.72

  • BS 5760-24:2014

    Reliability of systems, equipment and components. Guide to the integration of risk techniques in the inspection and testing of complex systems
    3/31/2014 - Paper - English - BSI
    Learn More
    €139.08

  • DIN EN 61014 VDE 0050-7:2014-03

    Programmes for reliability growth (IEC 56/1519/CD:2013)
    3/1/2014 - Paper - German - VDE
    Learn More
    €118.61

  • UNE-EN 61124:2014

    Reliability testing - Compliance tests for constant failure rate and constant failure intensity
    2/26/2014 - PDF - Spanish - AENOR
    Learn More
    €124.00

  • DIN 4000-76:2014-02

    Tabular layouts of properties - Part 76: Inserts, indexable
    2/1/2014 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 4000-174:2014-02

    Tabular layouts of properties - Part 174: Inserts for reaming
    2/1/2014 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 4003-174:2014-02

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 174: Inserts for reaming
    2/1/2014 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 8743:2014-01

    Packaging machines and packaging lines - Key figures to characterise operation behaviour and requirements for data collection in an acceptance test
    1/1/2014 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 8743:2014-01

    Packaging machines and packaging lines - Key figures to characterise operation behaviour and requirements for data collection in an acceptance test
    1/1/2014 - PDF - English - DIN
    Learn More
    €111.40

  • UNE-EN 62506:2013

    Methods for product accelerated testing (Endorsed by AENOR in January of 2014.)
    1/1/2014 - PDF - English - AENOR
    Learn More
    €137.00

  • NF E01-005 (12/2013)

    Mechanical products - Methodology for reduction of environmental impacts in product design and development
    12/27/2013 - Paper - French - AFNOR
    Learn More
    €121.17

  • NF C20-349, NF EN 61710 (12/2013)

    Power law model - Goodness-of-fit tests and estimation methods
    12/6/2013 - PDF - French - AFNOR
    Learn More
    €128.70

  • DIN 4000-173:2013-12

    Tabular layouts of properties - Part 173: Machine operated feed out tools and assembly parts
    12/1/2013 - PDF - German - DIN
    Learn More
    €108.80

  • DIN 4003-173:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 173: Machine operated feed out tools and assembly parts
    12/1/2013 - PDF - German - DIN
    Learn More
    €136.80

  • DIN 4003-88:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 88: Milling cutter with arbor hole for indexable inserts
    12/1/2013 - PDF - German - DIN
    Learn More
    €175.40

  • DIN 4003-89:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 89: Adaptive items for tools and extenders
    12/1/2013 - PDF - German - DIN
    Learn More
    €119.60

  • DIN 4003-90:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 90: Toolholders for indexable inserts
    12/1/2013 - PDF - German - DIN
    Learn More
    €191.40

  • DIN 4003-83:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 83: Milling cutter with arbor hole and non-indexable cutting edges
    12/1/2013 - PDF - German - DIN
    Learn More
    €125.30

  • DIN 4003-171:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 171: Replaceable inserts for drilling
    12/1/2013 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 4003-93:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads
    12/1/2013 - PDF - German - DIN
    Learn More
    €163.80

  • DIN 4003-172:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 172: Driven tool units
    12/1/2013 - PDF - German - DIN
    Learn More
    €130.80

  • NF C20-325, NF EN 62506 (11/2013)

    Methods for product accelerated testing
    11/23/2013 - PDF - French - AFNOR
    Learn More
    €164.80

  • NF C20-371, NF EN 62673 (11/2013)

    Methodology for communication network dependability assessment and assurance
    11/23/2013 - PDF - French - AFNOR
    Learn More
    €118.29

  • PAS 777:2013

    Specification for the qualification and labelling of used automotive engines and any related transmission units
    10/30/2013 - Paper - English - BSI
    Learn More
    €93.48

  • DIN 4003-127:2013-10

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 127: Reamers for replaceable inserts
    10/1/2013 - PDF - German - DIN
    Learn More
    €130.80

  • BS EN 62506:2013

    Methods for product accelerated testing
    9/30/2013 - Paper - English - BSI
    Learn More
    €289.56

  • BS EN 61710:2013

    Power law model. Goodness-of-fit tests and estimation methods
    9/30/2013 - Paper - English - BSI
    Learn More
    €271.32

  • SAE J 1051:2013-08-05

    Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
    8/5/2013 - PDF - English - SAE
    Learn More
    €66.30

  • DIN 4003-82:2013-08

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 82: End mills with non-indexable cutting edges
    8/1/2013 - PDF - German - DIN
    Learn More
    €163.80

  • DIN 4000-93:2013-08

    Tabular layouts of properties - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads
    8/1/2013 - PDF - German - DIN
    Learn More
    €89.00

  • VDI 4006 Blatt 3:2013-08

    Human reliability - Methods for event analysis regarding human behaviour
    8/1/2013 - PDF - English, German - VDI
    Learn More
    €120.38

  • SAE J 919:2013-07-24

    Sound Measurement - Off-Road Work Machines - Operator - Singular Type (Stabilized: Jul 2013)
    7/24/2013 - PDF - English - SAE
    Learn More
    €66.30

  • IEC 62506 (2013-06)

    IEC 62506:2013 Methods for product accelerated testing
    6/18/2013 - PDF - English, French - CEI
    Learn More
    €352.00

  • UNE-EN 61907:2013

    Communication network dependability engineering
    4/17/2013 - PDF - Spanish - AENOR
    Learn More
    €79.00

  • NF C20-325, NF EN 62506PR

    Methods for product accelerated testing.
    4/12/2013 - PDF - French - UTE
    Learn More
    €92.30

  • NF C20-320, NF EN 62551 (02/2013)

    Analysis techniques for dependability - Petri net techniques
    2/9/2013 - PDF - French - AFNOR
    Learn More
    €153.30

  • DIN 4003-77:2013-02

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 77: Inserts, clamped, for grooving, parting and thread machining
    2/1/2013 - PDF - German - DIN
    Learn More
    €141.90

  • DIN 4003-87:2013-02

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 87: End mills for indexable inserts
    2/1/2013 - PDF - German - DIN
    Learn More
    €209.50

  • DIN 4000-172:2012-12

    Tabular layouts of properties - Part 172: Driven tool units
    12/1/2012 - PDF - German - DIN
    Learn More
    €103.00

  • BS EN 62551:2012

    Analysis techniques for dependability. Petri net techniques
    11/30/2012 - Paper - English - BSI
    Learn More
    €271.32

  • NF C20-304, NF EN 61124 (11/2012)

    Reliability testing - Compliance tests for constant failure rate and constant failure intensity
    11/1/2012 - PDF - French - AFNOR
    Learn More
    €189.46

  • BS EN 62628:2012

    Guidance on software aspects of dependability
    10/31/2012 - Paper - English - BSI
    Learn More
    €271.32

  • IEC 62551 (2012-10)

    IEC 62551:2012 Analysis techniques for dependability - Petri net techniques
    10/2/2012 - PDF - English, French - CEI
    Learn More
    €330.00

  • DIN 4003-84:2012-10

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 84: Modular tooling systems with adjustable cartridges for boring
    10/1/2012 - PDF - German - DIN
    Learn More
    €169.80

  • DIN 4003-126:2012-10

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 126: Reamers with non-indexable cutting edges
    10/1/2012 - PDF - German - DIN
    Learn More
    €108.80

  • DIN 4000-1:2012-09

    Tabular layouts of properties - Part 1: Concepts and principles
    9/1/2012 - PDF - German - DIN
    Learn More
    €108.80

  • DIN 4000-126:2012-09

    Tabular layouts of properties - Part 126: Reamers with non-indexable cutting edges
    9/1/2012 - PDF - German - DIN
    Learn More
    €82.60

  • BS EN 61124:2012

    Reliability testing. Compliance tests for constant failure rate and constant failure intensity
    8/31/2012 - Paper - English - BSI
    Learn More
    €335.16

  • SAE J 1814:2012-08-20

    Operator Controls - Off-Road Machines
    8/20/2012 - PDF - English - SAE
    Learn More
    €66.30

  • FD E01-007 (08/2012)

    Particulate cleanliness control - Principles and good practices
    8/1/2012 - Paper - French - AFNOR
    Learn More
    €121.17

  • VDI 4007:2012-06

    Reliability goals - Determination, check, review, certificate
    6/1/2012 - PDF - English, German - VDI
    Learn More
    €144.69

  • IEC 61124 (2012-05)

    IEC 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
    5/23/2012 - PDF - English, French - CEI
    Learn More
    €363.00

  • SAE JA 1000/1:2012-05-07

    Reliability Program Standard Implementation Guide
    5/7/2012 - PDF - English - SAE
    Learn More
    €66.30

  • DIN 4000-171:2012-04

    Tabular layouts of properties - Part 171: Replaceable inserts for drilling
    4/1/2012 - PDF - German - DIN
    Learn More
    €61.70

  • UNE-EN 62429:2012

    Reliability growth - Stress testing for early failures in unique complex systems
    3/7/2012 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • DIN 4000-89:2012-03

    Tabular layouts of properties - Part 89: Adaptive items for tools and extenders
    3/1/2012 - PDF - German - DIN
    Learn More
    €153.40

  • DIN 4000-84:2012-02

    Tabular layouts of properties - Part 84: Modular tooling systems with adjustable cartridges for boring
    2/1/2012 - PDF - German - DIN
    Learn More
    €103.00

  • DIN 4000-94:2012-01

    Tabular layouts of properties - Part 94: Quick change adaptors
    1/1/2012 - PDF - German - DIN
    Learn More
    €68.30

  • DIN 4000-98:2012-01

    Tabular layouts of properties - Part 98: Lathe tools with non-indexable cutting edges
    1/1/2012 - PDF - German - DIN
    Learn More
    €82.60

  • ANSI/ISA 84.91.01:2012

    Identification and Mechanical Integrity of Instrumented Safety Functions in the Process Industry
    1/1/2012 - PDF sécurisé - English - ISA
    Learn More
    €51.00

  • DIN 4003-76:2011-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 76: Inserts, indexable
    12/1/2011 - PDF - German - DIN
    Learn More
    €125.30

  • DIN 4000-77:2011-12

    Tabular layouts of properties - Part 77: Inserts, clamped, for grooving, parting and thread machining
    12/1/2011 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 4000-90:2011-12

    Tabular layouts of properties - Part 90: Tool holders for indexable inserts
    12/1/2011 - PDF - German - DIN
    Learn More
    €96.00

  • DIN 4000-88:2011-12

    Tabular layouts of properties - Part 88: Milling cutter with arbor hole for indexable inserts
    12/1/2011 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 4000-87:2011-12

    Tabular layouts of properties - Part 87: End mills for indexable inserts
    12/1/2011 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 4000-168:2011-11

    Tabular layouts of properties - Part 168: Detecting elements/measuring sensors/evaluation devices including measuring amplifiers for geometrical quantities
    11/1/2011 - PDF - German - DIN
    Learn More
    €119.60

  • DIN 4003-80:2011-10

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies
    10/1/2011 - PDF - German - DIN
    Learn More
    €96.00

  • DIN 4000-128:2011-09

    Tabular layout of article characteristics - Part 128: Bonded abrasive products with bore or threaded insert
    9/1/2011 - PDF - German - DIN
    Learn More
    €103.00

  • DIN 4000-129:2011-09

    Tabular layout of article characteristics - Part 129: Bonded abrasive segments, honing tools, abrasive bars and grindstones
    9/1/2011 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 4000-130:2011-09

    Tabular layout of properties - Part 130: Abrasive pencils and abrasive wheels with thread inserts
    9/1/2011 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 4000-131:2011-09

    Tabular layout of properties - Part 131: Abrasive products on base
    9/1/2011 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 4000-132:2011-09

    Tabular layouts of properties - Part 132: Super abrasive products with bore
    9/1/2011 - PDF - German - DIN
    Learn More
    €108.80

  • DIN 4000-133:2011-09

    Tabular layouts of properties - Part 133: Super abrasive products with shank
    9/1/2011 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 4000-134:2011-09

    Tabular layouts of properties - Part 134: Non rotating products and honing tools with diamond or boron nitride
    9/1/2011 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 4000-135:2011-09

    Tabular layouts of properties - Part 135: Tools for dressing and profile trueing of bonded grinding tools
    9/1/2011 - PDF - German - DIN
    Learn More
    €108.80

  • DIN 4000-136:2011-09

    Tabular layouts of properties - Part 136: Holder and chuck tools for rotating and stationary grinding and dressing tools
    9/1/2011 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 4000-137:2011-09

    Tabular layouts of properties - Part 137: Tools with geometrically undefined cutting edges for machining of gears
    9/1/2011 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 4000-144:2011-09

    Tabular layouts of properties - Part 144: Master gears and truing gears for involute teeth
    9/1/2011 - PDF - German - DIN
    Learn More
    €75.40

  • VDI 4002 Blatt 2:2011-09

    Reliability Engineer - Requirements for qualification
    9/1/2011 - PDF - English, German - VDI
    Learn More
    €139.88

  • DIN 4000-78:2011-08

    Tabular layouts of properties - Part 78: Tips, brazed
    8/1/2011 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 4000-80:2011-08

    Tabular layouts of properties - Part 80: Screwing taps, cold forming taps and screwing dies
    8/1/2011 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 4000-82:2011-08

    Tabular layouts of properties - Part 82: End mills with non-indexable cutting edges
    8/1/2011 - PDF - German - DIN
    Learn More
    €96.00

  • BS EN 60300-3-12:2011

    Dependability management. Application guide. Integrated logistic support
    7/31/2011 - Paper - English - BSI
    Learn More
    €271.32

  • BS EN 62502:2011

    Analysis techniques for dependability. Event tree analysis (ETA)
    6/30/2011 - Paper - English - BSI
    Learn More
    €255.36

  • SAE JA 1010/1:2011-05-24

    Maintainability Program Standard Implementation Guide
    5/24/2011 - PDF - English - SAE
    Learn More
    €66.30

  • DIN 4000-83:2011-05

    Tabular layouts of properties - Part 83: Milling cutter with arbor hole and non-indexable cutting edges
    5/1/2011 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 4000-127:2011-04

    Tabular layouts of properties - Part 127: Reamers for replaceable inserts
    4/1/2011 - PDF - German - DIN
    Learn More
    €82.60

  • VDI 4002 Blatt 1:2011-04

    Reliability engineer - Job description
    4/1/2011 - PDF - English, German - VDI
    Learn More
    €51.35

  • UNE-EN 62402:2011

    Obsolescence management - Application guide
    3/9/2011 - PDF - Spanish - AENOR
    Learn More
    €61.00

  • XP E01-006 (03/2011)

    Mechanical products - Environmental performance - Assessment and declaration
    3/1/2011 - Paper - French - AFNOR
    Learn More
    €83.18

  • UNE-EN 62502:2010

    Analysis techniques for dependability - Event tree analysis (ETA) (Endorsed by AENOR in March of 2011.)
    3/1/2011 - PDF - English - AENOR
    Learn More
    €86.00

  • IEC 60300-3-12 (2011-02)

    IEC 60300-3-12:2011 Dependability management - Part 3-12: Application guide - Integrated logistic support
    2/17/2011 - PDF - English, French - CEI
    Learn More
    €297.00

  • DIN 4000-140:2011-02

    Tabular layouts of properties - Part 140: Toothing system data of work pieces
    2/1/2011 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 4000-142:2011-02

    Tabular layout of properties - Part 142: Shaving cutters for external and internal toothing
    2/1/2011 - PDF - German - DIN
    Learn More
    €82.60

  • NF C20-319, NF EN 62502 (02/2011)

    Analysis techniques for dependability - Event tree analysis (ETA)
    2/1/2011 - PDF - French - AFNOR
    Learn More
    €118.29

  • JIS C 5750-4-3:2011

    Dependability management - Part 4-3: Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
    1/20/2011 - PDF - Japanese - JSA
    Learn More
    €52.91

  • NF C20-310, NF EN 62508 (12/2010)

    Guidance on human aspects of dependability
    12/1/2010 - PDF - French - AFNOR
    Learn More
    €128.70

  • IEC 62502 (2010-10)

    IEC 62502:2010 Analysis techniques for dependability - Event tree analysis (ETA)
    10/27/2010 - PDF - English, French - CEI
    Learn More
    €264.00

  • DIN 4000-164:2010-10

    Tabular layouts of properties - Part 164: Standards, setting masters and normals for geometrical quantities
    10/1/2010 - PDF - German - DIN
    Learn More
    €114.10

  • DIN 4000-165:2010-10

    Tabular layouts of properties - Part 165: Gauges for geometrical quantities
    10/1/2010 - PDF - German - DIN
    Learn More
    €108.80

Items 1 to 200 of 475 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
To top