Call +33 (1) 40 02 03 05

17.040.10 : Limits and fits

Items 1 to 200 of 221 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  • ISO 14405-2:2018

    Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear or angular sizes
    12/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 14405-2:2018

    Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear or angular sizes
    12/1/2018 - Paper - French - ISO
    Learn More
    €123.00

  • UNE-EN ISO 14405-1:2018

    Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
    9/19/2018 - PDF - Spanish - AENOR
    Learn More
    €80.00

  • NBN EN ISO 5458:2018

    Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
    7/25/2018 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN ISO 5458:2018

    Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
    7/25/2018 - PDF - French - NBN
    Learn More
    €77.00

  • NF E04-559, NF EN ISO 5458 (06/2018)

    Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification
    6/6/2018 - Paper - French - AFNOR
    Learn More
    €95.37

  • NF E04-559, NF EN ISO 5458 (06/2018)

    Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification
    6/6/2018 - Paper - English - AFNOR
    Learn More
    €95.37

  • NF E22-382-2, NF ISO 12297-2 (06/2018)

    Rolling bearings - Cylindrical rollers - Part 2 : boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
    6/2/2018 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF E22-382-2, NF ISO 12297-2 (06/2018)

    Rolling bearings - Cylindrical rollers - Part 2 : boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
    6/2/2018 - Paper - English - AFNOR
    Learn More
    €66.72

  • ISO 5458:2018

    Geometrical product specifications (GPS) -- Geometrical tolerancing -- Pattern and combined geometrical specification
    5/1/2018 - Paper - English - ISO
    Learn More
    €165.00

  • ISO 5458:2018

    Geometrical product specifications (GPS) -- Geometrical tolerancing -- Pattern and combined geometrical specification
    5/1/2018 - Paper - French - ISO
    Learn More
    €165.00

  • SAE AMS 2253F:2018-02-24

    Tolerances Carbon and Alloy Steel Tubing (Stabilized: Feb 2018)
    2/24/2018 - PDF - English - SAE
    Learn More
    €73.00

  • NF E10-201-1, NF EN ISO 14253-1 (12/2017)

    Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications
    12/6/2017 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF E10-201-1, NF EN ISO 14253-1 (12/2017)

    Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications
    12/6/2017 - Paper - English - AFNOR
    Learn More
    €76.40

  • SAE AMS 2263E:2017-12-05

    Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Tubing
    12/5/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2222K:2017-11-03

    Tolerances Copper and Copper Alloy Sheet, Strip, and Plate
    11/3/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2221G:2017-09-25

    Tolerances Copper and Copper Alloy Bars and Rods
    9/25/2017 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2224G:2017-09-25

    Tolerances Copper and Copper Alloy Wire
    9/25/2017 - PDF - English - SAE
    Learn More
    €73.00

  • BS ISO 8062-4:2017

    Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts. Part 4: General tolerances for castings using profile tolerancing in a general datum system
    8/23/2017 - PDF - English - BSI
    Learn More
    €236.90

  • ISO 8062-4:2017

    Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 4: General tolerances for castings using profile tolerancing in a general datum system
    7/1/2017 - Paper - English - ISO
    Learn More
    €123.00

  • NF E02-200-2, NF EN ISO 1938-2 (04/2017)

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : reference disk gauges
    4/8/2017 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF E02-200-2, NF EN ISO 1938-2 (04/2017)

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : reference disk gauges
    4/8/2017 - Paper - English - AFNOR
    Learn More
    €53.41

  • NF E04-552, NF EN ISO 1101 (04/2017)

    Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
    4/1/2017 - Paper - French - AFNOR
    Learn More
    €174.63

  • UNE-EN ISO 1101:2017

    Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
    4/1/2017 - PDF - English - AENOR
    Learn More
    €186.00

  • NF E04-552, NF EN ISO 1101 (04/2017)

    Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
    4/1/2017 - Paper - English - AFNOR
    Learn More
    €174.63

  • NF E04-563-3, NF EN ISO 14405-3 (03/2017)

    Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3 : angular sizes
    3/22/2017 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF E04-563-3, NF EN ISO 14405-3 (03/2017)

    Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3 : angular sizes
    3/22/2017 - Paper - English - AFNOR
    Learn More
    €76.40

  • NBN EN ISO 1938-2:2017

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
    3/22/2017 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 1938-2:2017

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
    3/22/2017 - PDF - French - NBN
    Learn More
    €45.00

  • BS EN ISO 1938-2:2017

    Geometrical product specifications (GPS). Dimensional measuring equipment. Reference disk gauges
    2/28/2017 - PDF - English - BSI
    Learn More
    €144.90

  • BS EN ISO 1101:2017

    Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
    2/28/2017 - PDF - English - BSI
    Learn More
    €379.50

  • DIN 7190-1:2017-02

    Interference fits - Part 1: Calculation and design rules for cylindrical self-locking pressfits
    2/1/2017 - PDF - German - DIN
    Learn More
    €119.60

  • DIN 7190-2:2017-02

    Interference fits - Part 2: Calculation and design rules for conical self-locking pressfits
    2/1/2017 - PDF - German - DIN
    Learn More
    €103.00

  • BS EN ISO 14405-3:2017

    Geometrical product specifications (GPS). Dimensional tolerancing. Angular sizes
    1/31/2017 - PDF - English - BSI
    Learn More
    €236.90

  • NF A50-640-2, NF EN 12020-2 (01/2017)

    Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2 : tolerances on dimensions and form
    1/21/2017 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF A50-640-2, NF EN 12020-2 (01/2017)

    Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2 : tolerances on dimensions and form
    1/21/2017 - Paper - English - AFNOR
    Learn More
    €66.72

  • SAE AMS 2245B:2017-01-11

    Tolerances Titanium and Titanium Alloy Extruded Bars, Rods, and Shapes
    1/11/2017 - PDF - English - SAE
    Learn More
    €73.00

  • ISO 1938-2:2017

    Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 2: Reference disk gauges
    1/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 1938-2:2017

    Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 2: Reference disk gauges
    1/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • NF E04-563-1, NF EN ISO 14405-1 (12/2016)

    Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1 : linear sizes
    12/23/2016 - Paper - French - AFNOR
    Learn More
    €115.12

  • NF E04-563-1, NF EN ISO 14405-1 (12/2016)

    Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1 : linear sizes
    12/23/2016 - Paper - English - AFNOR
    Learn More
    €115.12

  • ISO 14405-3:2016

    Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 3: Angular sizes
    12/1/2016 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 14405-3:2016

    Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 3: Angular sizes
    12/1/2016 - Paper - French - ISO
    Learn More
    €123.00

  • SAE AMS 2252E:2016-11-10

    Tolerances Low-Alloy Steel Sheet, Strip, and Plate
    11/10/2016 - PDF - English - SAE
    Learn More
    €73.00

  • BS EN ISO 14405-1:2016

    Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
    9/30/2016 - PDF - English - BSI
    Learn More
    €282.90

  • SAE AMS 2232H:2016-09-15

    Tolerances Carbon Steel, Sheet, Strip, and Plate
    9/15/2016 - PDF - English - SAE
    Learn More
    €73.00

  • ISO 14405-1:2016

    Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
    8/1/2016 - Paper - English - ISO
    Learn More
    €186.00

  • ISO 14405-1:2016

    Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
    8/1/2016 - Paper - French - ISO
    Learn More
    €186.00

  • JIS B 0401-2:2016

    Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
    3/22/2016 - PDF - Japanese - JSA
    Learn More
    €52.91

  • DIN EN ISO 1938-1:2016-03

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015
    3/1/2016 - PDF - German - DIN
    Learn More
    €114.10

  • DIN EN ISO 1938-1:2016-03

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015
    3/1/2016 - PDF - English - DIN
    Learn More
    €142.80

  • SAE AMS 2241S:2016-01-12

    Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
    1/12/2016 - PDF - English - SAE
    Learn More
    €73.00

  • NBN EN ISO 1938-1:2015

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
    12/24/2015 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN ISO 1938-1:2015

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
    12/24/2015 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN ISO 1938-1:2015

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
    12/24/2015 - PDF - French - NBN
    Learn More
    €56.00

  • NF E02-200-1, NF EN ISO 1938-1 (12/2015)

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : plain limit gauges of linear size
    12/18/2015 - Paper - French - AFNOR
    Learn More
    €87.56

  • NF E02-200-1, NF EN ISO 1938-1 (12/2015)

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : plain limit gauges of linear size
    12/18/2015 - Paper - English - AFNOR
    Learn More
    €87.56

  • NF E22-621 (12/2015)

    Mechanical transmissions - Pressed-on assemblies on cylindrical shaft - Function, realisation, calculation
    12/4/2015 - Paper - French - AFNOR
    Learn More
    €104.89

  • BS EN ISO 1938-1:2015

    Geometrical product specifications (GPS). Dimensional measuring equipment. Plain limit gauges of linear size
    11/30/2015 - PDF - English - BSI
    Learn More
    €236.90

  • ISO 1938-1:2015

    Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 1: Plain limit gauges of linear size
    11/1/2015 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 1938-1:2015

    Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 1: Plain limit gauges of linear size
    11/1/2015 - Paper - French - ISO
    Learn More
    €144.00

  • XP E04-007 (08/2015)

    Geometrical product specifications (GPS) - Discreet modal decomposition - Analysis method
    8/19/2015 - Paper - French - AFNOR
    Learn More
    €95.37

  • SAE AMS 2231K:2015-07-28

    Tolerances Carbon Steel Bars
    7/28/2015 - PDF - English - SAE
    Learn More
    €73.00

  • NF E04-000, NF EN ISO 14638 (03/2015)

    Geometrical product specification (GPS) - Matrix model
    3/25/2015 - Paper - French - AFNOR
    Learn More
    €70.06

  • NF E04-000, NF EN ISO 14638 (03/2015)

    Geometrical product specification (GPS) - Matrix model
    3/25/2015 - Paper - English - AFNOR
    Learn More
    €66.72

  • XP A00-510-2, XP CEN ISO/TS 8062-2 (12/2014)

    Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2 : rules
    12/17/2014 - Paper - French - AFNOR
    Learn More
    €115.12

  • XP A00-510-2, XP CEN ISO/TS 8062-2 (12/2014)

    Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2 : rules
    12/17/2014 - Paper - English - AFNOR
    Learn More
    €115.12

  • SAE AMS 2242G:2014-12-01

    Tolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate
    12/1/2014 - PDF - English - SAE
    Learn More
    €73.00

  • JIS B 0403/ERRATUM 1:2014

    ERRATUM
    4/3/2014 - PDF - Japanese - JSA
    Learn More
    €0.00

  • JIS B 0403/ERRATUM 1:2014

    ERRATUM
    4/3/2014 - PDF - English - JSA
    Learn More
    €0.00

  • SAE MAM 2279B:2014-03-19

    Tolerances, Metric Rubber Products (Stabilized: Mar 2014)
    3/19/2014 - PDF - English - SAE
    Learn More
    €73.00

  • NF E03-051, NF ISO 965-1 (11/2013)

    ISO general purpose metric screw threads - Tolerances - Part 1 : principles and basic data
    11/9/2013 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF E03-051, NF ISO 965-1 (11/2013)

    ISO general purpose metric screw threads - Tolerances - Part 1 : principles and basic data
    11/9/2013 - Paper - English - AFNOR
    Learn More
    €76.40

  • NBN EN ISO 286-1/AC:2013

    Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
    10/25/2013 - PDF - English - NBN
    Learn More
    €0.00

  • NBN EN ISO 286-1/AC:2013

    Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
    10/25/2013 - PDF - French - NBN
    Learn More
    €0.00

  • NBN EN ISO 286-2/AC:2013

    Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
    10/25/2013 - PDF - English - NBN
    Learn More
    €0.00

  • NBN EN ISO 286-2/AC:2013

    Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
    10/25/2013 - PDF - French - NBN
    Learn More
    €0.00

  • SAE AMS 2262G:2013-10-21

    Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate
    10/21/2013 - PDF - English - SAE
    Learn More
    €73.00

  • NF E04-008 (10/2013)

    Geometrical Product Specifications (GPS) - Tolerance allocation method, indications and acceptance criteria - Methods based on arithmetics, quadratic and inertial statistics
    10/18/2013 - Paper - French - AFNOR
    Learn More
    €76.40

  • CEN ISO/TS 8062-2:2013

    Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013, Corrected version 2013-11-01)
    10/1/2013 - PDF - German - NBN
    Learn More
    €145.00

  • CEN ISO/TS 8062-2:2013

    Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013, Corrected version 2013-11-01)
    10/1/2013 - PDF - English - NBN
    Learn More
    €145.00

  • CEN ISO/TS 8062-2:2013

    Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013, Corrected version 2013-11-01)
    10/1/2013 - PDF - French - NBN
    Learn More
    €145.00

  • XP E04-553, XP ISO/TS 17863 (09/2013)

    Geometrical product specification (GPS) - Geometrical tolerancing of moveable assemblies
    9/4/2013 - Paper - French - AFNOR
    Learn More
    €66.72

  • XP E04-553, XP ISO/TS 17863 (09/2013)

    Geometrical product specification (GPS) - Geometrical tolerancing of moveable assemblies
    9/4/2013 - Paper - English - AFNOR
    Learn More
    €66.72

  • NF E02-352 (08/2013)

    Geometrical product specifications (GPS) - General tolerances (dimensional and geometrical) for cutted and bended workpieces
    8/10/2013 - Paper - French - AFNOR
    Learn More
    €87.56

  • ISO 286-1:2010/Cor 1:2013

    Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits
    8/1/2013 - Paper - English - ISO
    Learn More
    €0.00

  • ISO 286-1:2010/Cor 1:2013

    Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits
    8/1/2013 - Paper - French - ISO
    Learn More
    €0.00

  • ISO 286-2:2010/Cor 1:2013

    Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
    8/1/2013 - Paper - English - ISO
    Learn More
    €0.00

  • ISO 286-2:2010/Cor 1:2013

    Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
    8/1/2013 - Paper - French - ISO
    Learn More
    €0.00

  • ISO/TS 8062-2:2013 (R2016)

    Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 2: Rules
    7/1/2013 - Paper - English - ISO
    Learn More
    €186.00

  • ISO/TS 8062-2:2013 (R2016)

    Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 2: Rules
    7/1/2013 - Paper - French - ISO
    Learn More
    €186.00

  • PR NF E04-552/A1, PR NF EN ISO 1101/A1 (06/2013)

    Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out - Indication of special specification operators for form, orientation, location and run-out
    6/5/2013 - Paper - French - AFNOR
    Learn More
    €105.05

  • SAE AMS 2243K:2013-06-05

    Tolerances Corrosion and Heat-Resistant Steel Tubing
    6/5/2013 - PDF - English - SAE
    Learn More
    €73.00

  • SAE AMS 2261K:2012-10-08

    Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire
    10/8/2012 - PDF - English - SAE
    Learn More
    €73.00

  • NF E81-010 (04/2012)

    Blanking and stamping - Burr on blanked or punched metallic parts - Maximum allowable burr height and measuring method
    4/1/2012 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E04-563-2, NF EN ISO 14405-2 (02/2012)

    Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear sizes
    2/1/2012 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF E04-563-2, NF EN ISO 14405-2 (02/2012)

    Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear sizes
    2/1/2012 - Paper - English - AFNOR
    Learn More
    €76.40

  • JIS B 0415/ERRATUM 1:2012

    ERRATUM
    1/1/2012 - PDF - Japanese - JSA
    Learn More
    €0.00

  • JIS B 0415/ERRATUM 1:2012

    ERRATUM
    1/1/2012 - PDF - English - JSA
    Learn More
    €0.00

  • JIS B 0416/ERRATUM 1:2012

    ERRATUM
    1/1/2012 - PDF - Japanese - JSA
    Learn More
    €0.00

  • JIS B 0416/ERRATUM 1:2012

    ERRATUM
    1/1/2012 - PDF - English - JSA
    Learn More
    €0.00

  • SAE AMS 2279B:2011-11-07

    Tolerances Rubber Products (Stabilized: Nov 2011)
    11/7/2011 - PDF - English - SAE
    Learn More
    €73.00

  • NBN EN ISO 5459:2011

    Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
    10/21/2011 - PDF - German - NBN
    Learn More
    €155.00

  • NBN EN ISO 5459:2011

    Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
    10/21/2011 - PDF - English - NBN
    Learn More
    €155.00

  • NBN EN ISO 5459:2011

    Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
    10/21/2011 - PDF - French - NBN
    Learn More
    €155.00

  • BS EN ISO 5459:2011

    Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
    8/31/2011 - PDF - English - BSI
    Learn More
    €303.60

  • Métrologie avec les normes ISO


    8/12/2011 - Paper - French - HERMES
    Learn More
    €94.79

  • ISO 5459:2011 (R2018)

    Geometrical product specifications (GPS) -- Geometrical tolerancing -- Datums and datum systems
    8/1/2011 - Paper - English - ISO
    Learn More
    €207.00

  • ISO 5459:2011 (R2018)

    Geometrical product specifications (GPS) -- Geometrical tolerancing -- Datums and datum systems
    8/1/2011 - Paper - French - ISO
    Learn More
    €207.00

  • ISO 5459:2011 (R2018)

    Geometrical product specifications (GPS) -- Geometrical tolerancing -- Datums and datum systems
    8/1/2011 - Paper - Russian - ISO
    Learn More
    €207.00

  • NF E02-100-1, NF EN ISO 286-1 (09/2010)

    Geometrical product specification (GPS) - ISO code system for tolerances of linear sizes - Part 1 : basis of tolerances, deviations and fits
    9/1/2010 - Paper - French - AFNOR
    Learn More
    €95.37

  • NF E02-100-2, NF EN ISO 286-2 (09/2010)

    Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts
    9/1/2010 - Paper - French - AFNOR
    Learn More
    €115.12

  • NF E02-100-2, NF EN ISO 286-2 (09/2010)

    Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts
    9/1/2010 - Paper - English - AFNOR
    Learn More
    €115.12

  • NF E02-100-1, NF EN ISO 286-1 (09/2010)

    Geometrical product specification (GPS) - ISO code system for tolerances of linear sizes - Part 1 : basis of tolerances, deviations and fits
    9/1/2010 - Paper - English - AFNOR
    Learn More
    €95.37

  • NBN EN ISO 286-2:2010

    Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
    7/30/2010 - PDF - German - NBN
    Learn More
    €145.00

  • ISO 286-2:2010 (R2015)

    Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
    6/1/2010 - Paper - English - ISO
    Learn More
    €186.00

  • ISO 286-2:2010 (R2015)

    Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
    6/1/2010 - Paper - French - ISO
    Learn More
    €186.00

  • ISO 286-2:2010 (R2015)

    Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
    6/1/2010 - Paper - Russian - ISO
    Learn More
    €186.00

  • BS EN ISO 286-1:2010

    Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Basis of tolerances, deviations and fits
    5/31/2010 - PDF - English - BSI
    Learn More
    €257.60

  • NBN EN ISO 286-1:2010

    Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
    5/19/2010 - PDF - German - NBN
    Learn More
    €105.00

  • ISO 286-1:2010 (R2015)

    Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits
    4/1/2010 - Paper - English - ISO
    Learn More
    €165.00

  • ISO 286-1:2010 (R2015)

    Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits
    4/1/2010 - Paper - French - ISO
    Learn More
    €165.00

  • ISO 286-1:2010 (R2015)

    Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits
    4/1/2010 - Paper - Russian - ISO
    Learn More
    €165.00

  • Cotation de fabrication avec les normes ISO


    2/5/2010 - Paper - French - HERMES
    Learn More
    €77.73

  • BS 4500:2009 (R2014)

    Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
    9/30/2009 - PDF - English - BSI
    Learn More
    €257.60

  • BS 1916-1:2009 (R2014)

    Limits and fits for engineering. Guide to limits and tolerances
    9/30/2009 - PDF - English - BSI
    Learn More
    €236.90

  • BS 1916-2:2009 (R2014)

    Limits and fits for engineering. Guide to the selection of fits in BS 1916-1
    9/30/2009 - PDF - English - BSI
    Learn More
    €257.60

  • BS 1916-3:2009 (R2014)

    Limits and fits for engineering. Guide to tolerances, limits and fits for large diameters
    9/30/2009 - PDF - English - BSI
    Learn More
    €236.90

  • ISO 8062-3:2007/Cor 1:2009

    Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 3: General dimensional and geometrical tolerances and machining allowances for castings
    1/1/2009 - Paper - English - ISO
    Learn More
    €0.00

  • ISO 8062-3:2007/Cor 1:2009

    Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 3: General dimensional and geometrical tolerances and machining allowances for castings
    1/1/2009 - Paper - French - ISO
    Learn More
    €0.00

  • BS 969:2008

    Specification for limits and tolerances on plain limit gauges
    11/30/2008 - PDF - English - BSI
    Learn More
    €140.30

  • BS EN ISO 8062-3:2007

    Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings
    10/31/2007 - PDF - English - BSI
    Learn More
    €227.70

  • BS EN ISO 8062-1:2007

    Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Vocabulary
    10/31/2007 - PDF - English - BSI
    Learn More
    €236.90

  • NBN EN ISO 8062-1:2007

    Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
    10/5/2007 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN ISO 8062-1:2007

    Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
    10/5/2007 - PDF - French - NBN
    Learn More
    €77.00

  • NBN EN ISO 8062-3:2007

    Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
    10/5/2007 - PDF - German - NBN
    Learn More
    €105.00

  • NBN EN ISO 8062-3:2007

    Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
    10/5/2007 - PDF - English - NBN
    Learn More
    €105.00

  • NBN EN ISO 8062-3:2007

    Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
    10/5/2007 - PDF - French - NBN
    Learn More
    €105.00

  • NF A00-510-3, NF EN ISO 8062-3 (10/2007)

    Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3 : general dimensional and geometrical tolerances and machining allowances for castings
    10/1/2007 - Paper - French - AFNOR
    Learn More
    €87.56

  • NF A00-510-3, NF EN ISO 8062-3 (10/2007)

    Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3 : general dimensional and geometrical tolerances and machining allowances for castings
    10/1/2007 - Paper - English - AFNOR
    Learn More
    €87.56

  • JIS B 0703/ERRATUM 1:2007

    ERRATUM
    8/9/2007 - PDF - Japanese - JSA
    Learn More
    €0.00

  • JIS B 0703/ERRATUM 1:2007

    ERRATUM
    8/9/2007 - PDF - English - JSA
    Learn More
    €0.00

  • NF A00-510-1, NF EN ISO 8062-1 (08/2007)

    Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1 : vocabulary
    8/1/2007 - Paper - English, French - AFNOR
    Learn More
    €76.40

  • ISO 8062-1:2007 (R2016)

    Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 1: Vocabulary
    6/1/2007 - Paper - English, French - ISO
    Learn More
    €123.00

  • ISO 8062-3:2007 (R2016)

    Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 3: General dimensional and geometrical tolerances and machining allowances for castings
    6/1/2007 - Paper - French - ISO
    Learn More
    €144.00

  • ISO 8062-3:2007 (R2016)

    Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 3: General dimensional and geometrical tolerances and machining allowances for castings
    6/1/2007 - Paper - English - ISO
    Learn More
    €144.00

  • Langage des normes ISO de cotation


    4/13/2007 - Paper - French - HERMES
    Learn More
    €61.61

  • JIS B 0405/ERRATUM 1:2006

    ERRATUM
    1/1/2006 - PDF - Japanese - JSA
    Learn More
    €0.00

  • JIS B 0405/ERRATUM 1:2006

    ERRATUM
    1/1/2006 - PDF - English - JSA
    Learn More
    €0.00

  • ANSI B32.100-2005 (R2011)

    Preferred Metric Sizes for Flat, Round, Square, Rectangle, and Hexagon Metal Products
    1/1/2005 - PDF sécurisé - English - ANSI
    Learn More
    €35.00

  • NF E03-055, NF ISO 965-4 (10/2004)

    ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
    10/1/2004 - Paper - French - AFNOR
    Learn More
    €42.41

  • NF E03-057, NF ISO 965-5 (10/2004)

    ISO general purpose metric screw threads - Tolerances - Part 5 : limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
    10/1/2004 - Paper - French - AFNOR
    Learn More
    €53.41

  • NF E03-055, NF ISO 965-4 (10/2004)

    ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
    10/1/2004 - Paper - English - AFNOR
    Learn More
    €42.41

  • NF E03-057, NF ISO 965-5 (10/2004)

    ISO general purpose metric screw threads - Tolerances - Part 5 : limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
    10/1/2004 - Paper - English - AFNOR
    Learn More
    €53.41

  • SAE AMS 2244C:2018-04-18

    Tolerances Titanium and Titanium Alloy Tubing
    7/14/2003 - PDF - English - SAE
    Learn More
    €73.00

  • NF E02-353 (01/2001) (R2011)

    Geometrical products specification (GPS) - Chased parts - Dimensional and surface eveness tolerances for dimensions and parts without individual tolerances
    1/1/2001 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF E82-002-1, NF EN 10243-1 (12/1999)

    Steel die forgings - Tolerances on dimensions - Part 1 : drop and vertical press forgings
    12/1/1999 - Paper - French - AFNOR
    Learn More
    €115.12

  • NF E82-002-2, NF EN 10243-2 (12/1999)

    Steel die forgings - Tolerances on dimensions - Part 2 : upset forging made on horizontal forging machines
    12/1/1999 - Paper - French - AFNOR
    Learn More
    €104.89

  • NF E82-002-1, NF EN 10243-1 (12/1999)

    Steel die forgings - Tolerances on dimensions - Part 1 : drop and vertical press forgings
    12/1/1999 - Paper - English - AFNOR
    Learn More
    €115.12

  • NF E82-002-2, NF EN 10243-2 (12/1999)

    Steel die forgings - Tolerances on dimensions - Part 2 : upset forging made on horizontal forging machines
    12/1/1999 - Paper - English - AFNOR
    Learn More
    €104.89

  • JIS B 0418:1999 (R2014)

    Machining allowance for open die forgings
    3/20/1999 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF E03-053, NF ISO 965-2 (03/1999)

    ISO general purpose metric screw threads. Tolerances. Part 2 : limits of sizes for general purpose external and internal screw threads. Medium quality.
    3/1/1999 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF E03-054, NF ISO 965-3 (03/1999)

    ISO general purpose metric screw threads. Tolerances. Part 3 : deviations for constructional screw threads.
    3/1/1999 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF E03-053, NF ISO 965-2 (03/1999)

    ISO general purpose metric screw threads. Tolerances. Part 2 : limits of sizes for general purpose external and internal screw threads. Medium quality.
    3/1/1999 - Paper - English - AFNOR
    Learn More
    €66.72

  • NF E03-054, NF ISO 965-3 (03/1999)

    ISO general purpose metric screw threads. Tolerances. Part 3 : deviations for constructional screw threads.
    3/1/1999 - Paper - English - AFNOR
    Learn More
    €76.40

  • JIS B 0616:1996 (R2015)

    System of cone fits
    1/1/1996 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0403:1995 (R2015)

    Castings - System of dimensional tolerances and machining allowances
    2/1/1995 - PDF - Japanese - JSA
    Learn More
    €35.97

  • UNE-EN 22768-1:1994

    GENERAL TOLERANCES. PART 1: TOLERANCES FOR LINEAL AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS.
    7/6/1994 - PDF - Spanish - AENOR
    Learn More
    €46.00

  • UNE-EN 22768-2:1994

    GENERAL TOLERANCES. PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS. (ISO 2768-2:1989).
    6/29/1994 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • BS EN 22768-1:1993

    General tolerances. Tolerances for linear and angular dimensions without individual tolerance indications
    11/15/1993 - PDF - English - BSI
    Learn More
    €121.90

  • NF E02-350-2, NF EN 22768-2 (11/1993)

    General tolerances. Part 2 : geometrical tolerances for features without individual tolerance indications.
    11/1/1993 - Paper - French - AFNOR
    Learn More
    €76.40

  • NF E02-350-1, NF EN 22768-1 (11/1993)

    General tolerances. Part 1 : tolerances for linear and angular dimensions without individual tolerance indications.
    11/1/1993 - Paper - French - AFNOR
    Learn More
    €53.41

  • E02-351 (11/1993) (R2013)

    General tolerances - Geometrical tolerances for features without individual tolerance indications - Guide for applying NF EN 22768-2
    11/1/1993 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF E02-350-2, NF EN 22768-2 (11/1993)

    General tolerances. Part 2 : geometrical tolerances for features without individual tolerance indications.
    11/1/1993 - Paper - English - AFNOR
    Learn More
    €76.40

  • NF E02-350-1, NF EN 22768-1 (11/1993)

    General tolerances. Part 1 : tolerances for linear and angular dimensions without individual tolerance indications.
    11/1/1993 - Paper - English - AFNOR
    Learn More
    €53.41

  • NBN EN 22768-1:1993

    General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
    8/6/1993 - PDF - German - NBN
    Learn More
    €30.00

  • NBN EN 22768-1:1993

    General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
    8/6/1993 - PDF - English - NBN
    Learn More
    €30.00

  • NBN EN 22768-1:1993

    General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
    8/6/1993 - PDF - French - NBN
    Learn More
    €30.00

  • NBN EN 22768-2:1993

    General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
    8/6/1993 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 22768-2:1993

    General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
    8/6/1993 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 22768-2:1993

    General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
    8/6/1993 - PDF - French - NBN
    Learn More
    €45.00

  • BS EN 22768-2:1993

    General tolerances. Geometrical tolerances for features without individual tolerance indications
    7/15/1993 - PDF - English - BSI
    Learn More
    €144.90

  • DIN ISO 2768-1:1991-06

    General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989
    6/1/1991 - PDF - German - DIN
    Learn More
    €47.60

  • DIN ISO 2768-2:1991-04

    General tolerances; geometrical tolerances for features without individual tolerances indications; identical with ISO 2768-2:1989
    4/1/1991 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 7172:1991-04

    Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
    4/1/1991 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 7172:1991-04

    Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
    4/1/1991 - PDF - English - DIN
    Learn More
    €59.60

  • JIS B 0405:1991 (R2015)

    General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
    2/1/1991 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0419:1991 (R2015)

    General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications
    2/1/1991 - PDF - Japanese - JSA
    Learn More
    €25.00

  • UNE 82001:1991

    TERMINOLOGY OF LIMITS AND FITS.
    1/21/1991 - PDF - Spanish - AENOR
    Learn More
    €27.00

  • BS EN ISO 286-2:2010

    Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
    1/31/1990 - PDF - English - BSI
    Learn More
    €282.90

  • ISO 2768-1:1989 (R2017)

    General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
    11/1/1989 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2768-1:1989 (R2017)

    General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
    11/1/1989 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 2768-1:1989 (R2017)

    General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
    11/1/1989 - Paper - Russian - ISO
    Learn More
    €40.00

  • ISO 2768-2:1989 (R2017)

    General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications
    11/1/1989 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 2768-2:1989 (R2017)

    General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications
    11/1/1989 - Paper - Russian - ISO
    Learn More
    €61.00

  • ISO 2768-2:1989 (R2017)

    General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications
    11/1/1989 - Paper - English - ISO
    Learn More
    €61.00

  • NF T58-000 (10/1987) (R2012)

    Plastics. Tolerances applicable to the plastics moulded parts (thermosetting and thermoplastic).
    10/1/1987 - Paper - French - AFNOR
    Learn More
    €66.72

  • NF T58-000 (10/1987) (R2012)

    Plastics. Tolerances applicable to the plastics moulded parts (thermosetting and thermoplastic).
    10/1/1987 - Paper - English - AFNOR
    Learn More
    €66.72

  • JIS B 0701:1987 (R2013)

    Chamfer and roundness of machined parts
    10/1/1987 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0703:1987 (R2013)

    Roundness of castings
    10/1/1987 - PDF - Japanese - JSA
    Learn More
    €25.00

Items 1 to 200 of 221 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2